* [PFCP] Fix trailing whitespace in message generation files
* [PFCP] message gen: Support multiple URR ID IEs in Create PDR group
* [PFCP] Support associating multiple URRs to a PDR
According to 3GPP TS 29.244:
"""
A PDR shall contain:
- zero, one or more URRs, which contains instructions related to traffic measurement and reporting.
"""
* [PFCP] Fix trailing whitespace
* [PFCP] Fix wrong endianess enc of some URR values
u32 tlvs are already converted to big endian automatically. Manually
doing so ends up in double conversion and hence in wrong endianness
being sent over the wire.
Similar issue was also fixed recently in the PFCP decoding path.
Related: https://github.com/open5gs/open5gs/issues/1349
* Flow-Description use 'to assigned' in Gx Interface
* Support SDF Filter ID
* Support F-TEID's Choose
* BAR(Buffering) is added in PFCP session
* Default Apply Action uses NOCP|BUFF
So far, no operation was performed when Error Indication was received
from eNodeB. For that reason, I solved #568 issues by controlling
the MME to prevent this from happening.
Now, when GTP-U Error Indication is received, MME and SGW are implemented
to do what they have to do. I hope that the network can be restored
by responding appropriately even if Error Indication occurs.
<DOWNLINK>
RX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> Destination <UE_IP> <UE_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
<UPLINK>
RX : permit in from <UE_IP> <UE_PORT> to <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <UE_IP> <UE_PORT> Destination <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
* MME: select SGW by RR,TAC,ENB_ID
and enable round robin inside each option
* SMF: select PFCP associated UPF by RR,TAC,APN,ENB_ID
and enable round robin inside each option