In the past only GTPv2C was supported, and had the "gtp" generic prefix.
Later on, GTPv1C support was added, and "gtp1" prefix was used.
Let's move GTPv2C specific bits to have "gtp2" prefix too, and leave
"gtp" prefix for generic stuff among different GTP versions.
The use of the Gy interface (SMF acting as CTF towards an OCS node) is
mandated through configuration file. Default value "enable: auto" will
only make use of it in case a Diameter peer announcing support for the
Credit-Control Application is found.
Upon subscriber session creation, and after auth check over Gx, the SMF
will create a Gy session with the OCS and only after that step the SMF
will accept the session back to the subscriber.
The OCS may then grant some traffic volumes/time and ask to be notified
back with updated measurements.
In order to get the measurements, the SMF relies on PFCP URR configured
to the UPF through Session Repoort Request messages.
When closing the subscriber session, the SMF will also terminate the Gy
session at the OCS.
So far only some specifics parts of the Gy interface as well as the PFCP
side are implemented. Those should be enough to at least have
volume/time thresholds granted by the OCS, which then will be able to
track subsriber resource use.
This patch doesn't implement the OCS side of the Gy interface, that's
left as a future exercise. The interface was tested using an OCS
emulator implemented in TTCN-3 [1]
[1] https://cgit.osmocom.org/osmo-ttcn3-hacks/
TODO:
* Use an event for the report, like SMF_EVT_N4_TIMER?
* Properly set Service identifier in Gy CCR
* SMF: Properly set pkt/octet volumes in Gy CCR
** Update when receiving PFCP Modify Response.
* Figure out best way to require Gy through config file in open5gs-smfd.
* Create a new sess-sm.c which handles smf_sess_t state through
Gx+Gy+PFCP creation, modification and tear down. This way we can do
stuff in parallel, for instance Gx+Gy. It will alsoavoid duplicating
some code paths due to Gy being optional.
This commit adds required blocks in lib/diameter to be able to handle Gy
messages later in open5gs apps.
The Gy interface is mainly decribed in 3GPP TS 32.299 and 3GPP TS
32.251, which in turn refers to Diameter protcols defined in RFC4006.
This interface allows charging managment through an external OCS node.
The "Report Triggers" is sent SMF->UPF to tell in which situations a
report should be sent.
The "Usage Report Trigger" is sent UPF->SMF to indicate which situation
triggered the report.
* [PFCP] Fix trailing whitespace in message generation files
* [PFCP] message gen: Support multiple URR ID IEs in Create PDR group
* [PFCP] Support associating multiple URRs to a PDR
According to 3GPP TS 29.244:
"""
A PDR shall contain:
- zero, one or more URRs, which contains instructions related to traffic measurement and reporting.
"""
These will be further needed in PFCP in the future, as well as in other
Diameter based interfaces (such as Gy).
Let's put all implementation details in APIs so that devs don't need to
care about those details every time.
* [PFCP] Fix trailing whitespace
* [PFCP] Fix wrong endianess enc of some URR values
u32 tlvs are already converted to big endian automatically. Manually
doing so ends up in double conversion and hence in wrong endianness
being sent over the wire.
Similar issue was also fixed recently in the PFCP decoding path.
Related: https://github.com/open5gs/open5gs/issues/1349
mouse07410/asn1c#89
Found when tried to encode NGAP_CauseRadioNetwork_release_due_to_pre_emption
mouse07410/asn1c#90
Found when tried to decode messages encoded with newer schema
* Fix conversion from IPFilterRule to packet filter
As per 3GPP TS 24.008, following Packet filter component type identifier
are not supported on the LTE pre release-11 UEs:
IPv4 local address type
IPv6 remote address/prefix length type
IPv6 local address/prefix length type
And,
IPv6 remote address/prefix length type and
IPv6 local address/prefix length type shall be used when both MS and
Network support Local Address in TFTs.
This commit add logic to omit adding local address in packet filters
for compatibility with pre-release LTE 11 devices. The following parameter
could be used to toggle omit/no to omit behavior.
parameter:
no_ipv4v6_local_addr_in_packet_filter: <true/false>
* Remove logic of supporting pre-release LTE 11 devices in PCRF
According to TS 29.060 they should be added.
section 7.6:
"if it is a request for which a response has been defined, shall be sent
with a Sequence Number"
section 8.2:
"""
Sequence number flag (S) shall be set to "1"
...
For GTP-C messages not having a defined response message for a request
message, i.e. for messages Version Not Supported, RAN Information Relay
and Supported Extension Headers Notification, the Sequence Number shall
be ignored by the receiver.
"
It seems to be actually mandatory in GGSN->SGN directon, though it is
ignored in Release99 upwards. Let's hardcode it to 0 for now, should be
fine in the majority of cases.
* [CORE] tlv: Store mode in ogs_tlv_t
This allows specifying the format of the IE for each individual IE,
hence allowing messages containing IEs formatted in different ways.
This is needed in order to support parsing GTPv1-C, since messages
contain IEs with different structure (TLV vs TV). Hence, this is a
preparation patch to add support for parsing TVs in ogs-tlv.c/.h.
* [CORE] tlv: Support parsing msg with both TLV and TV in it
IEs of type TV are sometimes used in GTPv1-C. Current tlv parser/builder
doesn't provide with ways to parse messages which contain TV formatted
IEs. This patch adds the relevant types and ways to encode/decode them.
Furthermore, the current parser/builder allows parsing/building messages
containing the exact same format in all its IEs. A new parser function
is added which allows parsing messages of different types (TV, TLV)
mixed in the same message. In order to be able to do so, it uses the
general msg_mode passed to it in order to know the general TLV format
(in essence, the length of the Tag field, and also the length of the
Length field if applicable each IE).
Looking up the instance in the TLV description is left undone and
hadcoded to 0, since the only user so far requiring this API is GTPv1-C,
which has no instances.
* [CORE] tlv: Support repeated tag+instance parsing TLV message
In GTPv2C, repeated IEs (same tag) are easily differentiated by the
Instance byte, which provides info to match different decoded
structures. In GTPv1C though, there's no Instance byte, and we still
encounter repeated IEs (like GSN Address in Create PDP Context Request).
Hence, the TLV decoder needs to be updated to track count of IEs found
(identified by tag+instance, where instance is always 0 in GTPv1C) and
get the proper description index + offset into the decoded structure.
* [GTP]: Move GTPv2-C specifics to its own libgtp subdir
This will allow adding GTPv1-C code by the side. Most GTPv2 code is left
in this patch as "gtp" instead of renaming it to "gtp2" in order to
avoid massive changes. It can be done at a later stage if wanted.
* [GTP] Support generating GTPv1-C messages
* [SMF] Add Gn interface support
This patch introduces GTPv1C support to open5gs-smfd. With it,
open5gs-becomes a GGSN too, where SGSN can connect to, hence supporting
GERAN and UTRAN networks.
* [GTP] xact: Fix trailing whitespace
* [GTP] xact: Avoid exporting internally used functions
This simplifies the API header hiding unneeded APIs from external
components, and lets the compiler further optimize by
marking the functions as static.
* [GTP] xact: Drop unused API ogs_gtp_xact_find
After making it static, it became clear to the compiler that this
function is not used anywhere, warning about it. Let's drop it.
* [SMF] Fix potential null pointer dereference
Pointer "sess" was first dereferenced and later on checked for nullness.
This is clearly wrong. Rearrange the code path to make sure the check is
done first, then dereferenced.
* gitignore: Add subprojects/libtins
* cosmetic: Fix whitespace
The network access mode of HSS has been changed to 0 (Packet and Circuit).
Versions of MME prior to v2.4.2 did not use this value. Open5GS set
the attach result of Attach Complete message as it is by looking
at the attach type of the Attach Request message.
Now, if the network access mode of HSS is set to 2 (Only Packet),
this value is affected by MME from v2.4.3. Regardless of the attach type
of the Attach Request, the MME will set EPS Only to the attach result
of Attach Complete.
3GPP TS 24.501 version 16.6.0 Release 16
4.4 NAS security
4.4.6 Protection of initial NAS signalling messages
1) the UE needs to send non-cleartext IEs in a REGISTRATION REQUEST
or SERVICE REQUEST message, the UE includes the entire REGISTRATION
REQUEST or SERVICE REQUEST message (i.e. containing both cleartext IEs
and non-cleartext IEs) in the NAS message container IE and shall cipher
the value part of the NAS message container IE. The UE shall then send
a REGISTRATION REQUEST or SERVICE REQUEST message containing
the cleartext IEs and the NAS message container IE;
As per RFC 4861 Router advertisement message
format, Source Address MUST be the link-local address
assigned to the interface from which this message is sent.
Since SMF was not sending it as per RFC, certain
phones were not completing the procedure of stateless
IPv6 address autoconfiguration mentioned in
3GPP TS 23.401 version 15.12.0 Release 15, section 5.3.1.2.2
When connecting to the UPF port for the PFCP protocol (8805) and sending
an association setup request followed by a session establishment request
with a PDI Network Instance set to ‘internet’, it causes a stack corruption
to occur.
So, ogs_fqdn_parse() fixed.
nas-common library includes libcrypt. However, SGW-C don't have to use
crypt library. As such, ogs_nas_plmn_id function was moved to
3gpp-core-types.[ch]
For more information,
$ ./install/bin/open5gs-sgwcd
./install/bin/open5gs-sgwcd: error while loading shared libraries: libogscrypt.so.2: cannot open shared object file: No such file or directory
$ ldd ./install/bin/open5gs-sgwcd
linux-vdso.so.1 (0x00007ffc749ad000)
libogsapp.so.2 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogsapp.so.2 (0x00007f1f92277000)
libogscore.so.2 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogscore.so.2 (0x00007f1f92240000)
libogsgtp.so.2 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogsgtp.so.2 (0x00007f1f921eb000)
libogsnas-common.so.2 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogsnas-common.so.2 (0x00007f1f921e5000)
libogspfcp.so.2 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogspfcp.so.2 (0x00007f1f92177000)
libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f1f92134000)
libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f1f91f42000)
libyaml-0.so.2 => /usr/lib/x86_64-linux-gnu/libyaml-0.so.2 (0x00007f1f91f20000)
libogscrypt.so.2 => not found
libogsipfw.so.2 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogsipfw.so.2 (0x00007f1f91ef5000)
/lib64/ld-linux-x86-64.so.2 (0x00007f1f922b1000)
commit 183d8b8344122f25f77be79b1b698c71f48c1656
Author: Sukchan Lee <acetcom@gmail.com>
Date: Fri May 28 23:44:26 2021 +0900
[SMF] introduce new list API [#1019]
Sometimes we may need two lists for same node.
To do this, I created a new list API, and applied it this pull request.
All process will be forcely exited if it failed to encode the S1AP/NGAP/GTP/PFCP message. It is to make sure there was no problem with the encoding of open5gs.
Pau Espin
Sukchan Lee
EugeneBogush
Supreeth Herle
Julian Lemmerich
Mehmet Hakan Doğan
Balint Cristian
Umakant Kulkarni
Spencer Sevilla
Josh Bailey
Venkata Pilla