470e66d37d
[ #235 ] TCP enabled for MacOSX
2019-07-28 20:18:51 +09:00
Harald Welte
a8c14916a7
freeDiameter: Use SCTP-only by default, not TCP-only
...
The existing freeDiameter default config files for HSS, MME, PCRF and PGW
disabled SCTP and enabled TCP. This is not in compliance with
3GPP TS 29.272 secition 7.1.5 which clearly states:
"Diameter messages over the S6a, S6d, S13 and S13' interfaces shall
make use of SCTP IETF RFC 4960 [14]"
2019-07-28 12:41:52 +02:00
0ebd85f364
Integration with OGSLib
2019-04-27 23:54:30 +09:00
3b66bf09aa
Renew freeDiameter Certification #93 , #94
2018-08-17 10:00:15 +09:00
7b99cc7d7c
Changes default IP configuration ( #14 )
...
* NextEPC will not use 127.0.0.1 address for Diameter and GTP-U
* MME
S1AP: Auto-Detect
GTP-C: Auto-Detect
DIAMETER: 127.0.0.2
* SGW
GTP-C: 127.0.0.2
GTP-U: Auto-Detect
* PGW
GTP-C: Both 127.0.0.3 and [::1]
GTP-U: Both 127.0.0.3 and [::1]
DIAMETER: 127.0.0.3
* HSS
DIAMETER: 127.0.0.4
* PCRF
DIAMETER: 127.0.0.5
2018-02-05 08:08:41 +00:00
81be4cca66
PGW dimaeter IP address is changed from 127.0.0.1 to 127.0.0.2
...
127.0.0.1:3868 could be used by other software. So, we will change the
IP address.
2018-01-03 09:28:23 +09:00
05c95dbfef
default address is changed.
...
o PGW
- GTPC : 127.0.0.1, [::1]
- GTPU : 127.0.0.1, [::1]
o SGW
- GTPC : 127.0.0.2
- GTPU : auto-configured
o MME
- S1AP : auto-configured
- GTPC : auto-configured
- Diameter : 127.0.0.3
o HSS
- Diameter : 127.0.0.4
o PCRF
- Diameter : 127.0.0.5
2017-12-14 01:46:35 +00:00
8fb2e0ba3b
change default IP : 127.76.0.x -> 127.0.0.x
2017-11-24 13:52:22 +09:00
f4a47e30c7
support relative path of freeDiameter
2017-11-06 13:02:36 +00:00
1941c8b729
freediameter extensions installation path is changed to
...
'${libdir}/nextepc/freeDiameter'
2017-11-06 11:36:07 +00:00
4e33365bf4
debian packaging is initially done.
...
network script is added
move testscript in debian/rules
2017-10-27 16:15:14 +00:00
e367b00d2c
do debian packaging (stage-1)
2017-10-27 03:15:14 +00:00
f624adf540
change default configuration using loopback addresses
...
mme : 127.76.0.1
sgw : 127.76.0.2
pgw : 127.76.0.3
hss : 127.76.0.4
pcrf : 127.76.0.5
If you would like to connect internet, you need to change MME.S1AP_IPV4
and SGW.GTPU_IPV4 with external IP address
2017-10-25 16:30:19 +09:00
df1f35e92b
Logrotate is added. But more test is needed
2017-10-24 19:14:09 +09:00
adcc473d6e
'make check` before 'make install'
...
checkepc.sh script is created.
this script generates necessary configuration file before `make
install`. And then, execute `./testepc -f ./etc/nextepc.conf`
2017-10-24 01:03:25 +09:00
30e7beb84c
Merge branch 'laforge/debian-packaging' of https://github.com/laf0rge/nextepc into debian-packaging
2017-10-23 14:22:07 +09:00
Harald Welte
ec91b9e8da
Fix directory mix-up. @prefix@ vs. @sysconfdir@ vs @libdir@ vs @localstatedir@
...
Installing to @prefix@/etc is wrong, this will end up in /usr/etc
on most linux distributions, where /etc (@sysconfdir@) would be correct.
The same is true for /var (@localstatedir@), we don't want log files
suddenly to be in /usr/var/log rather than /var/log
However, this is further complicated by the fact that @libdir@ is not
recursively resolved but could expand to "${prefix}/lib" which
of course makes no sense inside a config file. So instead, let's
introduce adl_RECURSIVE_EVAL and define @LIB_DIR@ and @SYSCONF_DIR@
with recursively-expanded versions of those variables.
2017-10-17 23:43:51 +02:00
83a21c5840
configuration is changed
2017-10-17 13:04:45 +09:00
420171fc57
move INSTALL file and remove binary package
2017-09-29 23:33:01 +09:00
e1948f572c
update config
2017-09-29 10:57:00 +09:00
811cd72866
add freediameter binary package
2017-09-27 18:57:56 +09:00
15368ffe18
remove freeDiameter source
2017-09-26 16:43:29 +09:00
d5e229f077
re-add freeDiameter 1.2.6
2017-09-26 13:43:49 +09:00
8c5d884402
use my own extension for freeDiameter
2017-08-17 15:13:03 +09:00
75cdc9c077
add cert and key for pgw/pcrf
2017-08-16 22:58:12 +09:00
fccfb1aa2b
re-archi freediameter
2017-08-16 22:03:36 +09:00
2746199b73
add initial code for diameter gx
2017-08-13 22:26:58 +09:00
c4f6ce6daf
move dict_s6a to extensions
2017-08-13 10:29:14 +09:00
ddd4c12a58
now we should use freediameter configuration file
2017-08-13 00:35:11 +09:00
f4bd03d96d
Fix the diameter duplicated port problem.
...
SCTP is disabled with 'No_SCTP' option
2017-08-03 15:53:59 +09:00
47c4638c62
fix the bug
2017-08-03 15:15:00 +09:00
be36979e1e
ip changes for freeDiameter configuration
2017-08-03 15:03:30 +09:00
5ced50785f
add sample configuration for freeDiameter
2017-08-03 14:09:14 +09:00
Sukchan Lee
Harald Welte