== Known limitation ==
Placing npcf-smpolicycontrol and pcf-policyauthorization
in different NFs is not supported. Both npcf-smpolicycontrol
and pcf-policyauthorization should be placed in the same NF.
* Add Diameter Dictionary Elements
* Initial IDR Framework
* Resolve Compile Issues
* Moving Closer
* Compile error
* Somewhat Working stuffing Code
* Add Timestamp Changes
* Cleanup some of this code. mme_s6a_handle_idr in s6a-handler.c removed for now, since it will only come in handy when IDR flag is set to request current location, which would involve breaking out into paging. I think there's a few other things we can do just within fd-path first.
* further removal of mme_s6a_handle_idr
The problem occurred in the following scenario:
1. VLR sent PAGING-REQUEST to the MME
2. MME sent S1-Paging to the UE
3. Paging failed
4. MME responded SERVICE-REQUEST to the VLR
5. VLR sent DOWNLINK-UNITDATA to the MME
6. Even though there is no S1 Context,
MME try to sent DownlinkNASTransport message to the UE.
7. So, the problem occurred.
I've changed the number 4 PAGING-REJECT instead of SERVICE-REQUEST.
* CLR while idle is broken after 7031856cd7
Cancel Location Request arriving while UE is idle will not proceed to paging due to this check for S1 connection. Using new flag "isAnswer" to bypass this check to allow paging to occur when we are not doing a AIA/ULA related procedure.
* No Context Setup is required when sending the detach request. If the paging was due to wanting to send a Detach Request to the UE, then we fast track to sending the detach request.
* emm-sm.c:
In the case of MME initiated detach while UE is idle, there is no initial conext setup. We go right from the service request after paging into sending the detach request. TS23.401
mme-path.c:
Using nas_eps.type in the case of MME Initiated Detach while UE is idle does not work. nas_eps.type would represent the service request.
mme-s11-handler.c:
After S11 action, no action should be taken. We want to wait for the detach accept from the UE before proceeding with the S1 release (detach).
* InitialContextSetup should occur for detach.
Do not Set Origin-Hosts with fd_msg_rescode_set before potential use of ogs_diam_message_experimental_rescode_set. This results in multiple Origin-Host/Realm AVPs.
- Added diameter dictionary definitions for Cancel Location
- Cancel Location will completely remove UE from MME, allow for a fresh IMSI attach to occur on next attempt.
- T3422 is used for detach request.
- Added new handling for s6a events in mme-sm, as not all s6a messages are at attach now. Maybe there's something in a state machine I should've been using here instead of a new flag?
- Testing was completed with UE in idle and connected. With CLR flags indicating re-attach required and without. Also sending CLR after UE detach. And then sending again when mme_ue is empty.
Found no support for HSS provided charging characteristics. Following TS32.251 A.4:
- Use PDN level CC, if one wasn't provided then use subscription level CC
- Don't send CC in S11 if it wasn't included
For HSS's which do not include the NAM, the MME should not treat this as a fatal error. MME should just assume PACKET_AND_CIRCUIT (0), as was decided in a previous PR.
When a UE that requests slices tries to connect and there are no slices configured, the reject message is:
5GMM cause = 0x7 (5GS Services not allowed)
however it should be:
5GMM cause = 0x3e (No network slices available)
All 5GMM cause value in reject message is reviewed in this commit
In the past only GTPv2C was supported, and had the "gtp" generic prefix.
Later on, GTPv1C support was added, and "gtp1" prefix was used.
Let's move GTPv2C specific bits to have "gtp2" prefix too, and leave
"gtp" prefix for generic stuff among different GTP versions.
This commit adds EMM Cause to Attach accept message when
Attach Request has COMBINED EPS IMSI ATTACH but the HSS
Network-Access-Mode is configure for EPS ONLY.
Sukchan Lee
jmasterfunk84
Bostjan Meglic
Carlos Giraldo
Spencer Sevilla
Pau Espin
Supreeth Herle