* CLR while idle is broken after 7031856cd7
Cancel Location Request arriving while UE is idle will not proceed to paging due to this check for S1 connection. Using new flag "isAnswer" to bypass this check to allow paging to occur when we are not doing a AIA/ULA related procedure.
* No Context Setup is required when sending the detach request. If the paging was due to wanting to send a Detach Request to the UE, then we fast track to sending the detach request.
* emm-sm.c:
In the case of MME initiated detach while UE is idle, there is no initial conext setup. We go right from the service request after paging into sending the detach request. TS23.401
mme-path.c:
Using nas_eps.type in the case of MME Initiated Detach while UE is idle does not work. nas_eps.type would represent the service request.
mme-s11-handler.c:
After S11 action, no action should be taken. We want to wait for the detach accept from the UE before proceeding with the S1 release (detach).
* InitialContextSetup should occur for detach.
Do not Set Origin-Hosts with fd_msg_rescode_set before potential use of ogs_diam_message_experimental_rescode_set. This results in multiple Origin-Host/Realm AVPs.
- Added diameter dictionary definitions for Cancel Location
- Cancel Location will completely remove UE from MME, allow for a fresh IMSI attach to occur on next attempt.
- T3422 is used for detach request.
- Added new handling for s6a events in mme-sm, as not all s6a messages are at attach now. Maybe there's something in a state machine I should've been using here instead of a new flag?
- Testing was completed with UE in idle and connected. With CLR flags indicating re-attach required and without. Also sending CLR after UE detach. And then sending again when mme_ue is empty.
Found no support for HSS provided charging characteristics. Following TS32.251 A.4:
- Use PDN level CC, if one wasn't provided then use subscription level CC
- Don't send CC in S11 if it wasn't included
For HSS's which do not include the NAM, the MME should not treat this as a fatal error. MME should just assume PACKET_AND_CIRCUIT (0), as was decided in a previous PR.
When a UE that requests slices tries to connect and there are no slices configured, the reject message is:
5GMM cause = 0x7 (5GS Services not allowed)
however it should be:
5GMM cause = 0x3e (No network slices available)
All 5GMM cause value in reject message is reviewed in this commit
In the past only GTPv2C was supported, and had the "gtp" generic prefix.
Later on, GTPv1C support was added, and "gtp1" prefix was used.
Let's move GTPv2C specific bits to have "gtp2" prefix too, and leave
"gtp" prefix for generic stuff among different GTP versions.
This commit adds EMM Cause to Attach accept message when
Attach Request has COMBINED EPS IMSI ATTACH but the HSS
Network-Access-Mode is configure for EPS ONLY.
* [CORE] tlv: Store mode in ogs_tlv_t
This allows specifying the format of the IE for each individual IE,
hence allowing messages containing IEs formatted in different ways.
This is needed in order to support parsing GTPv1-C, since messages
contain IEs with different structure (TLV vs TV). Hence, this is a
preparation patch to add support for parsing TVs in ogs-tlv.c/.h.
* [CORE] tlv: Support parsing msg with both TLV and TV in it
IEs of type TV are sometimes used in GTPv1-C. Current tlv parser/builder
doesn't provide with ways to parse messages which contain TV formatted
IEs. This patch adds the relevant types and ways to encode/decode them.
Furthermore, the current parser/builder allows parsing/building messages
containing the exact same format in all its IEs. A new parser function
is added which allows parsing messages of different types (TV, TLV)
mixed in the same message. In order to be able to do so, it uses the
general msg_mode passed to it in order to know the general TLV format
(in essence, the length of the Tag field, and also the length of the
Length field if applicable each IE).
Looking up the instance in the TLV description is left undone and
hadcoded to 0, since the only user so far requiring this API is GTPv1-C,
which has no instances.
* [CORE] tlv: Support repeated tag+instance parsing TLV message
In GTPv2C, repeated IEs (same tag) are easily differentiated by the
Instance byte, which provides info to match different decoded
structures. In GTPv1C though, there's no Instance byte, and we still
encounter repeated IEs (like GSN Address in Create PDP Context Request).
Hence, the TLV decoder needs to be updated to track count of IEs found
(identified by tag+instance, where instance is always 0 in GTPv1C) and
get the proper description index + offset into the decoded structure.
* [GTP]: Move GTPv2-C specifics to its own libgtp subdir
This will allow adding GTPv1-C code by the side. Most GTPv2 code is left
in this patch as "gtp" instead of renaming it to "gtp2" in order to
avoid massive changes. It can be done at a later stage if wanted.
* [GTP] Support generating GTPv1-C messages
* [SMF] Add Gn interface support
This patch introduces GTPv1C support to open5gs-smfd. With it,
open5gs-becomes a GGSN too, where SGSN can connect to, hence supporting
GERAN and UTRAN networks.
The network access mode of HSS has been changed to 0 (Packet and Circuit).
Versions of MME prior to v2.4.2 did not use this value. Open5GS set
the attach result of Attach Complete message as it is by looking
at the attach type of the Attach Request message.
Now, if the network access mode of HSS is set to 2 (Only Packet),
this value is affected by MME from v2.4.3. Regardless of the attach type
of the Attach Request, the MME will set EPS Only to the attach result
of Attach Complete.
3GPP TS 24.501 version 16.6.0 Release 16
4.4 NAS security
4.4.6 Protection of initial NAS signalling messages
1) the UE needs to send non-cleartext IEs in a REGISTRATION REQUEST
or SERVICE REQUEST message, the UE includes the entire REGISTRATION
REQUEST or SERVICE REQUEST message (i.e. containing both cleartext IEs
and non-cleartext IEs) in the NAS message container IE and shall cipher
the value part of the NAS message container IE. The UE shall then send
a REGISTRATION REQUEST or SERVICE REQUEST message containing
the cleartext IEs and the NAS message container IE;