xpp: can use modern Asterisk hotplug support

* New asynchronous behavior is used only when two conditions are met:
  - Finding new $ASTERISK_SUPPORTS_DAHDI_HOTPLUG=yes in /etc/dahdi/init.conf
    This should be set only when Asterisk support hotplug and configured
    to use it (no_failed_channels==1).
  - DAHDI auto_assign_spans==0

* Adapt /usr/share/dahdi/astribank_hook:
  - Refactor old twinstar behavior into functions
  - Add new behavior in a function (just enable the Asrribank watchdog)
  - Call the correct function.

* Adapt init script:
  If asynchronous behavior is on, don't wait for all Astribanks to
  finish initialization (it's enough that we saw all/some of them)

Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
This commit is contained in:
Oron Peled 2014-10-22 15:02:58 -04:00 committed by Tzafrir Cohen
parent cd6083b6ce
commit f11b937659
3 changed files with 89 additions and 21 deletions

View File

@ -144,6 +144,14 @@ hotplug_exit_after_load() {
# Initialize the Xorcom Astribank (xpp/) using perl utiliites:
xpp_startup() {
if [ "$ASTERISK_SUPPORTS_DAHDI_HOTPLUG" = yes ]; then
aas_param='/sys/module/dahdi/parameters/auto_assign_spans'
aas=`cat "$aas_param" 2>/dev/null`
if [ "$aas" = 0 ]; then
echo 1>&2 "Don't wait for Astribanks (use Asterisk hotplug-support)"
return 0
fi
fi
# do nothing if there are no astribank devices:
if ! /usr/share/dahdi/waitfor_xpds; then return 0; fi

View File

@ -17,6 +17,7 @@
#XPP_FIRMWARE_DIR=/usr/share/dahdi
#XPP_HOTPLUG_DISABLED=yes
#XPP_HOTPLUG_DAHDI=yes
#ASTERISK_SUPPORTS_DAHDI_HOTPLUG=yes
# Disable udev handling:
#DAHDI_UDEV_DISABLE_DEVICES=yes

View File

@ -16,6 +16,8 @@ PATH="$dir:/usr/sbin:/sbin:/usr/bin:/bin"
set -e
LOCK="/var/lock/twinstar_startup"
[ -r /etc/dahdi/init.conf ] && . /etc/dahdi/init.conf
# For lab testing
@ -32,17 +34,38 @@ if [ "$XPP_HOTPLUG_DAHDI" != yes ]; then
fi
export XPPORDER_CONF="$dahdi_conf/xpp_order"
if [ ! -r "$XPPORDER_CONF" ]; then
(
echo "Skip($ACTION): No '$XPPORDER_CONF'"
echo "Removing uneeded startup semaphore"
astribank_is_starting -v -r 2>&1
) 2>&1 | $LOGGER
exit 0
fi
export DAHDI_CFG_CMD="dahdi_cfg -c $dahdi_conf/system.conf"
export CALLED_FROM_ATRIBANK_HOOK=yes
can_full_async() {
# Can we work aynchronously:
# - Need modern Asterisk that accept hotplug DAHDI devices.
# - Need DAHDI with "auto_assign_spans" == 0
if [ "$ASTERISK_SUPPORTS_DAHDI_HOTPLUG" = yes ]; then
aas_param='/sys/module/dahdi/parameters/auto_assign_spans'
aas=`cat "$aas_param" 2>/dev/null`
if [ "$aas" = 0 ]; then
return 0
else
$LOGGER "No async operation ($aas_param != 0)"
fi
else
$LOGGER "No async operation (ASTERISK_SUPPORTS_DAHDI_HOTPLUG!=yes)"
fi
return 1
}
check_xpporder_conf() {
if [ ! -r "$XPPORDER_CONF" ]; then
(
echo "Skip($ACTION): No '$XPPORDER_CONF'"
echo "Removing uneeded startup semaphore"
astribank_is_starting -v -r 2>&1
) 2>&1 | $LOGGER
exit 0
fi
}
clean_lines() {
sed -e 's/#.*//' -e 'y/\t/ /' -e 's/^ *//' -e 's/ *$//' -e '$s/$/\n/' "$XPPORDER_CONF"
}
@ -64,10 +87,6 @@ matched_devices() {
done
}
NUM_WANTED=`clean_lines | sed '/^$/d' | wc -l`
NUM_GOOD=`matched_devices | wc -l`
LOCK="/var/lock/twinstar_startup"
# Wait until udev finished processing our requests
# so we know the device files were actually created
# before trying dahdi_cfg et-al.
@ -110,13 +129,9 @@ start_dahdi() {
rm -f "$LOCK"
}
#echo "$0: $ACTION($XBUS_NAME)" | $LOGGER
case "$ACTION" in
add)
;;
remove)
;;
online)
old_synchronous_start() {
NUM_GOOD=`matched_devices | wc -l`
NUM_WANTED=`clean_lines | sed '/^$/d' | wc -l`
echo "$ACTION($XBUS_NAME): $NUM_GOOD/$NUM_WANTED from $XPPORDER_CONF" | $LOGGER
if [ "$NUM_GOOD" -eq "$NUM_WANTED" ]; then
(
@ -142,8 +157,11 @@ online)
fi
) < /dev/null 2>&1 | $LOGGER &
fi
;;
offline)
}
old_synchronous_stop() {
NUM_GOOD=`matched_devices | wc -l`
NUM_WANTED=`clean_lines | sed '/^$/d' | wc -l`
echo "$ACTION($XBUS_NAME): $NUM_GOOD/$NUM_WANTED from $XPPORDER_CONF" | $LOGGER
if [ "$NUM_GOOD" -eq 0 ]; then
echo "All Astribanks offline" | $LOGGER
@ -152,6 +170,47 @@ offline)
fi
rm -f "$LOCK"
fi
}
tws_watchdog_enable() {
devdir="/sys$DEVPATH"
label=`cat "$devdir/label"`
connector=`cat "$devdir/connector"`
xbus=`echo "$devdir" | sed 's,.*/,,'`
prefix="${xbus}: [${label}] @${connector}"
TWS_NOAUTOJUMPFILE="$TWS_DIR/twinstar_no_autojump"
if [ -e "$TWS_NOAUTOJUMPFILE" ]; then
$LOGGER "$prefix: ignore wd (found $TWS_NOAUTOJUMPFILE)"
else
# Re-arm Astribank watchdog
transportdir="$devdir/transport"
busnum=`cat "$transportdir/busnum" 2>/dev/null || :`
devnum=`cat "$transportdir/devnum" 2>/dev/null || :`
devaddr=`printf "%03d/%03d" "$busnum" "$devnum"`
$LOGGER "$prefix: enabling twinstar watchdog"
astribank_tool -D "$devaddr" -w 1 2>&1 | $LOGGER
fi
}
#echo "$0: $ACTION($XBUS_NAME)" | $LOGGER
case "$ACTION" in
add)
;;
remove)
;;
online)
if can_full_async; then
tws_watchdog_enable
else
old_synchronous_start
fi
;;
offline)
if can_full_async; then
: # Nothing to do
else
old_synchronous_stop
fi
;;
*)
echo "$0: Unknown ACTION='$ACTION'" | $LOGGER