Since commit f5f169ba99 "Split build rules for tools to allow
skipping them." these recursive makefiles are not used.
(debian/rules.d/Makefile can additionally install the top-level Kbuild
and Makefile, but that target hasn't been used since svn rev 18133
(version 3.1-1~experimental.1).)
The current check has never worked because the find -path predicate
matches against the whole path, including the given root. In this
case that is $DESTDIR which always includes the version string.
Change to use cd before find.
Also, check all non-directories rather than all entries with "perf" in
the name.
hv_{kvp,vss}_daemon used to communicate with the corresponding kernel
drivers over netlink, but now they use char devices. hv_fcopy_daemon
always used a char device. Rather than checking for Hyper-V
specifically, change all of the init scripts and systemd service
definitions to check for the appropriate device nodes.
Delete the check-hyperv program that we used to check for Hyper-V
in init scripts.
Because these command lines don't start with "$(MAKE)", we should
tell make that we are recursing. Without this, the child make
can't run more than one job in parallel (and warns about this).
The upstream Makefile uses DEBUG to control both stripping of debug
information *and* disabling optimisations.
We want to disable stripping of debug information so that (normally)
dh_strip can move it into a separate package later. However we also
want to enable optimisations by default.
Therefore:
- Set the STRIP variable (a command prefix) to "true"
- Set the DEBUG variable (a pseudo-boolean) to "true" if and only if
the "noopt" build option is used
These two are terse by default and don't respect the KBUILD_VERBOSE
environment variable.
(I considered adding V=1 to the MAKEFLAGS we use by default in
debian/rules.real, but this might have different semantics for the few
tools that aren't built using either kbuild or automake.)
-----BEGIN PGP SIGNATURE-----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=JUfi
-----END PGP SIGNATURE-----
Merge tag 'debian/4.17.6-2'
Release linux (4.17.6-2).
- Drop the ABI maintenance patch
- Resolve conflict between changes to config file generation in sid
(delete CONFIG_BUILD_SALT) and master (putting them in
arch-dependent packages)
The previous fix ensured that objtool was built for the right host
architecture, but it was still including some UAPI header files
(in particular <asm/bitsperlong.h>) for the build architecture.
Currently we replicate the mapping of Debian architectures to kernel
source architectures here. Use the KERNEL_ARCH variable that is now
passed down by rules.real. We still need to check whether perf is
supported on the architecture, though.
-----BEGIN PGP SIGNATURE-----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=VAyl
-----END PGP SIGNATURE-----
Merge tag 'debian/4.17.6-1'
Release linux (4.17.6-1).
- Drop patches for ABI maintenance or that are already upstream
- Drop ABI reference files
objtool is normally built and used during the kernel build process,
in which case it should always be built as a native executable.
But when we build it for linux-tools it should match the target
architecture. We need to override the CC and LD variables to
make this work.
It has a lintian error (non-empty-dependency_libs-in-la-file) and it
also seems to be missing a header (the newly added
usbip_host_common.h) since Linux 4.7. No-one seems to have noticed,
and it has nothing build-depending on it, so get rid of it.
This reverts commit 85b468262e "Remove unused liblockdep packaging"
and 87d08943da "liblockdep: Stop trying to build packages, as it
failed to build again", but doesn't restore the patches. All our
patches, and further build fixes, were applied upstream as of
v4.13-rc1.
Currently the linux-source-<version> package may or may not include
these files, depending on the order things are built in.
As autotools always modifies the source directory, copy (rsync) the
source to the build directory and build in-place there.
Some years back I patched the #include of <linux/usbip.h> to include
the current, uninstalled version through a relative path because the
system-installed version will normally be outdated. We're about to
start copying the source to avoid writing autotools crap into the
source directory, which breaks this relative path.
Since we now install the UAPI headers under debian/build at the start
of the tools build, drop the patch and add that directory to the
include path.
Pass $(CROSS_COMPILE) or host GNU type through to upstream build rules.
debian/rules.real: Filter tools packages by host arch, not build arch
debian/rules.d/Makefile: Build the tools needed for headers_install in
a separate subdirectory
Currently we build-depend on the native python (via asciidoc), and on
the host python (via python-dev). As these are not coinstallable it
is impossible to perform a complete cross-build. Until that's resolved,
this will allow cross-building of most of the package with the
combination of the 'cross' and 'nopython' profiles.
(This also sidesteps the issue of perf wanting a multilib compiler.)
Add installdir variable that defaults to $(prefix)/$(OUTDIR) as used
in scripts/, but can be set directly in tools/hv which doesn't want
to mirror the source hierarchy.
Ben Hutchings
Marcin Juszkiewicz
Luca Boccassi
Hilko Bengen
Uwe Kleine-König