debian-packaging
/
linux
8
0
Fork 0
Code Releases Activity
linux/debian/patches/features/all/ARM-sunxi-ahci-and-gmac.patch

2548 lines
76 KiB
Diff
Raw Blame History

commit 15d6fcb8b18bcd251139f2f557067411f4c9500a
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sat Mar 1 20:26:20 2014 +0100
ARM: sunxi: dt: Add sunxi-common-regulators include file
Most sunxi boards with a sata connector also have a gpio controlled connector
for sata target power and almost all sunxi boards have a gpio controlled vbus
for usb1 and usb2.
This commit adds an include file for the regulators representing these
supplies, avoiding the need to copy and paste the regulator code to allmost
all sunxi board dts files.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
(cherry picked from commit 25ff22a532f1124397ece327e675aabfef4fa7b4)
commit cef54381f3fe3b9968dc0944eda347b734ec0aeb
Author: Emilio López <emilio@elopez.com.ar>
Date: Wed Mar 19 15:19:32 2014 -0300
clk: sunxi: fix some calculations
Some divisor calculations were misrounded, causing higher than requested
rates on some clocks. Fix them up using DIV_ROUND_UP, and replace one
homebrew instance of it as well with the right macro.
Reported-by: Boris BREZILLON <b.brezillon.dev@gmail.com>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
(cherry picked from commit 2226013972da1ec0a2aeb13a684180bb2b50e0f3)
commit f1096cc726d521c62a36ef4cfd7d31845d2a3f01
Author: Chen-Yu Tsai <wens@csie.org>
Date: Mon Feb 10 18:35:47 2014 +0800
clk: sunxi: Add Allwinner A20/A31 GMAC clock unit
The Allwinner A20/A31 clock module controls the transmit clock source
and interface type of the GMAC ethernet controller. Model this as
a single clock for GMAC drivers to use.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
(cherry picked from commit e4c6d6c11bee5ff11feb837a0a76103b3eba252f)
Conflicts:
Documentation/devicetree/bindings/clock/sunxi.txt
commit 5732a8aedf1e58bf154942d35d6675beead2cc58
Author: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Wed Feb 5 14:05:03 2014 +0100
clk: sunxi: Add support for PLL6 on the A31
The A31 has a slightly different PLL6 clock. Add support for this new clock in
our driver.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
(cherry picked from commit 92ef67c53ad92487c3c8de75e7940384c2edd793)
commit e50895e6c5f5a0677f6a65ccea8934897604c7da
Author: Chen-Yu Tsai <wens@csie.org>
Date: Mon Feb 3 09:51:40 2014 +0800
clk: sunxi: get divs parent clock name from parent factor clock
Divs clocks consist of a parent factor clock with multiple outputs,
and seperate clocks for each output. Get the name of the parent
clock from the parent factor clock, instead of the DT node name.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
(cherry picked from commit 97e36b3ce3106988b82e1ca53b1d1c872bde855a)
commit 1daa0121a7be5f38adcdfbb6e6bf42d9d6df5737
Author: Chen-Yu Tsai <wens@csie.org>
Date: Mon Feb 3 09:51:39 2014 +0800
clk: sunxi: add names for pll5, pll6 parent clocks to factors_data
Some factor clocks, such as the parent clock of pll5 and pll6, have
multiple output names. Add the corresponding names to factors_data
tied to compatible string.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
(cherry picked from commit 667f542db542fddc62d1299b17451d7cae84f6e1)
commit 66d96749ad78255d0903f67497fdfe5bd2161bf3
Author: Chen-Yu Tsai <wens@csie.org>
Date: Mon Feb 3 09:51:37 2014 +0800
clk: sunxi: add clock-output-names dt property support
sunxi clock drivers use dt node name as clock name, but clock
nodes should be named clk@X, so the names would be the same.
Let the drivers read clock names from dt clock-output-names
property.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
(cherry picked from commit f64111ebaf6776558f0e60d0ea8c7a9c579b9436)
commit ba9d3543becbab5cb2582e81c4ee15afc19f720c
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sat Mar 1 20:26:22 2014 +0100
ARM: sun7i: dt: Add ahci / sata support
This patch adds sunxi sata support to A20 boards that have such a connector.
Some boards also feature a regulator via a GPIO and support for this is also
added.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
(cherry picked from commit 902febf9ea856dc9a9376bcdc70dfaa9b3ad5a74)
Conflicts:
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
arch/arm/boot/dts/sun7i-a20.dtsi
commit 089eb5838989a6f0cab56cb259637d8ff145f3bc
Author: Oliver Schinagl <oliver@schinagl.nl>
Date: Sat Mar 1 20:26:21 2014 +0100
ARM: sun4i: dt: Add ahci / sata support
This patch adds sunxi sata support to A10 boards that have such a connector.
Some boards also feature a regulator via a GPIO and support for this is also
added.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
(cherry picked from commit 248bd1e228eb9cc7ff9577d45b5d1b6d52c43cd9)
Conflicts:
arch/arm/boot/dts/sun4i-a10.dtsi
commit 7a25c91712808d75e7e504487bb94620f12ce0b8
Author: Marc Zyngier <marc.zyngier@arm.com>
Date: Tue Feb 18 14:04:44 2014 +0000
ARM: sun7i: add arch timer node
The Allwinner A20 SoC is built around a pair of Cortex-A7 cores,
which have the usual generic timers. Report this in the DT.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
(cherry picked from commit 7902763e4a4d04a96406447f935a8f676e73e0ce)
commit 7ffc006a340f7f2dcd4949462e3aa7b22f59ef62
Author: Chen-Yu Tsai <wens@csie.org>
Date: Mon Feb 10 18:35:54 2014 +0800
ARM: dts: sun7i: Add ethernet alias for GMAC
All Allwinner A20 boards we support can only use either EMAC or GMAC,
as they share the same pins. As we have switched all supported to
GMAC, we should alias GMAC (the active controller) as ethernet0,
so u-boot will insert the MAC address for the correct controller.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
(cherry picked from commit 18428f7782920171fbcf0ccedcf6a146e7cc2e6f)
commit 5ccc8c209394c5217cf1e4195997d9f936f5bd63
Author: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Thu Jan 2 22:05:04 2014 +0100
ARM: sun7i: Add missing serial aliases
Some UART aliases have been defined, but not all of them. Add the remaining
ones to be consistent and to ease the parsing of the DT by the bootloaders.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
(cherry picked from commit 4566b4beafe4582488907b84cb04e6c0efba384a)
commit ee1689f3993061de7757eab84e95c70f497c6886
Author: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Thu Jan 2 22:05:04 2014 +0100
ARM: sun6i: Add missing serial aliases
Some UART aliases have been defined, but not all of them. Add the remaining
ones to be consistent and to ease the parsing of the DT by the bootloaders.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
(cherry picked from commit 54428d4025c2ce1f26bd6f677edaa7170a974787)
commit d8183f5ad12bd23962b89063387899abdc717648
Author: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Thu Jan 2 22:05:04 2014 +0100
ARM: sun5i: a10s: Add missing serial aliases
Some UART aliases have been defined, but not all of them. Add the remaining
ones to be consistent and to ease the parsing of the DT by the bootloaders.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
(cherry picked from commit 4dd4065f80ccd09e336388e7ff8e3a4a1dcf8e83)
commit 5dc99b5e04e8048d550634ea56bf699e02c147f1
Author: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Thu Jan 2 22:05:04 2014 +0100
ARM: sun4i: a10: Add missing serial aliases
Some UART aliases have been defined, but not all of them. Add the remaining
ones to be consistent and to ease the parsing of the DT by the bootloaders.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
(cherry picked from commit 143b13d6e603abb0dc374cf31ec22f5dd28500eb)
commit c67f298a228e6614a5394f831d17ad5f8a29d186
Author: Chen-Yu Tsai <wens@csie.org>
Date: Mon Feb 10 18:35:53 2014 +0800
ARM: dts: sun7i: a20-olinuxino-micro: Enable GMAC instead of EMAC
GMAC has better performance and fewer hardware issues.
Use the GMAC in MII mode for ethernet instead of the EMAC.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
(cherry picked from commit 7164318297f7f2567d4ca44a5e4affc910b1b979)
commit 08f1be55ac881ca708f0d21d4ab5244cc99dc3ed
Author: Chen-Yu Tsai <wens@csie.org>
Date: Mon Feb 10 18:35:52 2014 +0800
ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC
GMAC has better performance and fewer hardware issues.
Use the GMAC in MII mode for ethernet instead of the EMAC.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
(cherry picked from commit 5e71892f01d07a68bab0529f64cb8cd06bf94fd4)
commit fb227cb85a9fb05925b7d2dbfc91ee0469523c05
Author: Chen-Yu Tsai <wens@csie.org>
Date: Mon Feb 10 18:35:51 2014 +0800
ARM: dts: sun7i: cubietruck: Enable the GMAC
The CubieTruck uses the GMAC with an RGMII phy.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
(cherry picked from commit 67073d97672d03cc29ba252235e31c7e54ea9b62)
commit 7dc7a78b507297af1ced79170c4b5f9a3b559c76
Author: Chen-Yu Tsai <wens@csie.org>
Date: Mon Feb 10 18:35:50 2014 +0800
ARM: dts: sun7i: Add pin muxing options for the GMAC
The A20 has EMAC and GMAC muxed on the same pins.
Add pin sets with gmac function for MII and RGMII mode to the DTSI.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
(cherry picked from commit 129ccbcd6fc704f3a0df892240f3aeb463d461f5)
commit e7609b19b3f95a7415acb249b5ede9ae5b74caa0
Author: Chen-Yu Tsai <wens@csie.org>
Date: Mon Feb 10 18:35:49 2014 +0800
ARM: dts: sun7i: Add GMAC controller node to sun7i DTSI
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
(cherry picked from commit c40b8d5858f6396b11d7f859a76bef9b82a65743)
commit 9fd91d26fb223ca444d7232aae39bc402f7c0c67
Author: Chen-Yu Tsai <wens@csie.org>
Date: Mon Feb 10 18:35:48 2014 +0800
ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI
The GMAC uses 1 of 2 sources for its transmit clock, depending on the
PHY interface mode. Add both sources as dummy clocks, and as parents
to the GMAC clock node.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
(cherry picked from commit daed5a8163dcc9ff63e4fde8f7e8ce885ba4c34b)
commit 732a0e04187ae4e216b9b3f2add1e8af1491b9f2
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sun Feb 23 12:52:41 2014 +0100
ahci_sunxi: Use msleep instead of mdelay
ahci_sunxi_phy_init is called from the probe and resume code paths, and
sleeping is safe in both, so use msleep instead of mdelay.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
(cherry picked from commit d2ec147a76d0e051db19d378cac3ee7721877717)
commit e47a4a22ce18b11ae8108cb66579bdbf27a3c6b6
Author: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Date: Mon Mar 17 14:08:12 2014 +0100
ata: ahci_sunxi: fix code formatting
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit cdf457a4fe30980f7c15a894af2f954f85cd71d2)
commit 55f1e3fa16e761e5d9f69bfd45fbf94f74182356
Author: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Date: Mon Mar 17 14:06:57 2014 +0100
ata: ahci_sunxi: make ahci_sunxi_resume() static
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 1bf9d885658cbee1bc8e4324d0e27b02b1540d58)
commit 98e351d4a64434059defa66fb463c42cc3b91ae5
Author: Roger Quadros <rogerq@ti.com>
Date: Sat Feb 22 16:53:40 2014 +0100
ata: ahci_platform: Manage SATA PHY
Some platforms have a PHY hooked up to the SATA controller. The PHY
needs to be initialized and powered up for SATA to work. We do that
using the PHY framework.
tj: Minor comment formatting updates.
CC: Balaji T K <balajitk@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo<tj@kernel.org>
(cherry picked from commit 21b5faeec229d4f70a7f60a7b0b065c98198f491)
commit b86357997ea09c7201e532809fb8a4a3ac809280
Author: Olliver Schinagl <oliver@schinagl.nl>
Date: Sat Feb 22 16:53:36 2014 +0100
ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform
This patch adds support for the ahci sata controler found on Allwinner A10
and A20 SoCs to the ahci_platform driver.
Orignally written by Olliver Schinagl using the approach of having a platform
device which probe method creates a new child platform device which gets
driven by ahci_platform.c, as done by ahci_imx.c .
Refactored by Hans de Goede to add most of the non sunxi specific functionality
to ahci_platform.c and use a platform_data pointer from of_device_id for the
sunxi specific bits.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
(cherry picked from commit c5754b5220f01e8722799d35c04a76e82c62d7d8)
commit 510b793cdc550ff40fdd51cb59ad081e89217a86
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sat Feb 22 16:53:35 2014 +0100
ahci-platform: "Library-ise" suspend / resume functionality
Split suspend / resume code into host suspend / resume functionality and
resource enable / disabling phases, and export the new suspend_ / resume_host
functions.
tj: Minor comment formatting updates.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
(cherry picked from commit 648cb6fd83b97f0f772db783a280af300fa9f2bc)
commit f86ef8cec39c7bfc27f128ae1325ba51892bff0f
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sat Feb 22 16:53:34 2014 +0100
ahci-platform: "Library-ise" ahci_probe functionality
ahci_probe consists of 3 steps:
1) Get resources (get mmio, clks, regulator)
2) Enable resources, handled by ahci_platform_enable_resouces
3) The more or less standard ahci-host controller init sequence
This commit refactors step 1 and 3 into separate functions, so the platform
drivers for AHCI implementations which need a specific order in step 2,
and / or need to do some custom register poking at some time, can re-use
ahci-platform.c code without needing to copy and paste it.
Note that ahci_platform_init_host's prototype takes the 3 non function
members of ahci_platform_data as arguments, the idea is that drivers using
the new exported utility functions will not use ahci_platform_data at all,
and hopefully in the future ahci_platform_data can go away entirely.
tj: Minor comment formatting updates.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
(cherry picked from commit 23b07d4cb3c0c850055cf968af44019b8da185fb)
commit d2892d30b6752365f821ba67d0352125ec683d39
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sat Feb 22 16:53:33 2014 +0100
ahci-platform: Add enable_ / disable_resources helper functions
tj: Minor comment formatting updates.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
(cherry picked from commit 96a01ba52c60fdd74dd6e8cf06645d06515b1396)
commit 7114f980aefb057ab24921130e14d92ac76e44c3
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sat Feb 22 16:53:32 2014 +0100
ahci-platform: Add support for an optional regulator for sata-target power
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
(cherry picked from commit 4b3e603a298db26c6c37e8b08adcce24d014df13)
commit 0e457adc70a512a892727895a4758fadd3d567ee
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sat Feb 22 16:53:31 2014 +0100
ahci-platform: Add support for devices with more then 1 clock
The allwinner-sun4i AHCI controller needs 2 clocks to be enabled and the
imx AHCI controller needs 3 clocks to be enabled.
tj: Minor comment formatting updates.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
(cherry picked from commit 156c5887948cd191417f18026aab9ce26e5a95da)
commit 3535037fafc980139b3c6ae31b58455660600195
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sat Feb 22 16:53:30 2014 +0100
libahci: Allow drivers to override start_engine
Allwinner A10 and A20 ARM SoCs have an AHCI sata controller which needs a
special register to be poked before starting the DMA engine.
This register gets reset on an ahci_stop_engine call, so there is no other
place then ahci_start_engine where this poking can be done.
This commit allows drivers to override ahci_start_engine behavior for use by
the Allwinner AHCI driver (and potentially other drivers in the future).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
(cherry picked from commit 039ece38da45f5e6a94be3aa7611cf3634bc2461)
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 89de156..499bfed 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -4,17 +4,28 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
Each SATA controller should have its own node.
Required properties:
-- compatible : compatible list, contains "snps,spear-ahci"
+- compatible : compatible list, one of "snps,spear-ahci",
+ "snps,exynos5440-ahci", "ibm,476gtr-ahci", or
+ "allwinner,sun4i-a10-ahci"
- interrupts : <interrupt mapping for SATA IRQ>
- reg : <registers mapping>
Optional properties:
- dma-coherent : Present if dma operations are coherent
+- clocks : a list of phandle + clock specifier pairs
+- target-supply : regulator for SATA target power
-Example:
+Examples:
sata@ffe08000 {
compatible = "snps,spear-ahci";
reg = <0xffe08000 0x1000>;
interrupts = <115>;
-
};
+
+ ahci: sata@01c18000 {
+ compatible = "allwinner,sun4i-a10-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <56>;
+ clocks = <&pll6 0>, <&ahb_gates 25>;
+ target-supply = <&reg_ahci_5v>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index c2cb762..5865acd 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -11,6 +11,7 @@ Required properties:
"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
"allwinner,sun4i-pll5-clk" - for the PLL5 clock
"allwinner,sun4i-pll6-clk" - for the PLL6 clock
+ "allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
"allwinner,sun4i-axi-clk" - for the AXI clock
"allwinner,sun4i-axi-gates-clk" - for the AXI gates
@@ -37,6 +38,7 @@ Required properties:
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
"allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
"allwinner,sun7i-a20-out-clk" - for the external output clocks
+ "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
Required properties for all clocks:
- reg : shall be the control register address for the clock.
@@ -49,6 +51,9 @@ Required properties for all clocks:
Additionally, "allwinner,*-gates-clk" clocks require:
- clock-output-names : the corresponding gate names that the clock controls
+For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate
+dummy clocks at 25 MHz and 125 MHz, respectively. See example.
+
Clock consumers should specify the desired clocks they use with a
"clocks" phandle cell. Consumers that are using a gated clock should
provide an additional ID in their clock property. This ID is the
@@ -76,3 +81,29 @@ cpu: cpu@01c20054 {
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>;
};
+
+mii_phy_tx_clk: clk@2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ clock-output-names = "mii_phy_tx";
+};
+
+gmac_int_tx_clk: clk@3 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_int_tx";
+};
+
+gmac_clk: clk@01c20164 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-gmac-clk";
+ reg = <0x01c20164 0x4>;
+ /*
+ * The first clock must be fixed at 25MHz;
+ * the second clock must be fixed at 125MHz
+ */
+ clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+ clock-output-names = "gmac";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index d4b081d..027a0ed 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -35,6 +35,10 @@
};
};
+ ahci: sata@01c18000 {
+ status = "okay";
+ };
+
pinctrl@01c20800 {
emac_power_pin_a1000: emac_power_pin@0 {
allwinner,pins = "PH15";
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index b139ee6..20407ac 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -12,6 +12,7 @@
/dts-v1/;
/include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
/ {
model = "Cubietech Cubieboard";
@@ -33,6 +34,11 @@
};
};
+ ahci: sata@01c18000 {
+ target-supply = <&reg_ahci_5v>;
+ status = "okay";
+ };
+
pinctrl@01c20800 {
led_pins_cubieboard: led_pins@0 {
allwinner,pins = "PH20", "PH21";
@@ -77,4 +83,8 @@
linux,default-trigger = "heartbeat";
};
};
+
+ reg_ahci_5v: ahci-5v {
+ status = "okay";
+ };
};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index d4d2763..796e59b 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -19,6 +19,12 @@
ethernet0 = &emac;
serial0 = &uart0;
serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ serial6 = &uart6;
+ serial7 = &uart7;
};
cpus {
@@ -330,6 +336,14 @@
#size-cells = <0>;
};
+ ahci: sata@01c18000 {
+ compatible = "allwinner,sun4i-a10-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <56>;
+ clocks = <&pll6 0>, <&ahb_gates 25>;
+ status = "disabled";
+ };
+
intc: interrupt-controller@01c20400 {
compatible = "allwinner,sun4i-ic";
reg = <0x01c20400 0x400>;
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 79fd412..848baaa 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -18,6 +18,10 @@
aliases {
ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
};
cpus {
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 5256ad9..092bf97 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -16,6 +16,16 @@
/ {
interrupt-parent = <&gic>;
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ };
+
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 5c51cb8..4bed115 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -13,25 +13,16 @@
/dts-v1/;
/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
/ {
model = "Cubietech Cubieboard2";
compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
-
- mdio@01c0b080 {
+ ahci: sata@01c18000 {
+ target-supply = <&reg_ahci_5v>;
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
pinctrl@01c20800 {
@@ -60,6 +51,18 @@
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
+
+ gmac: ethernet@01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
};
leds {
@@ -77,4 +80,8 @@
gpios = <&pio 7 20 0>;
};
};
+
+ reg_ahci_5v: ahci-5v {
+ status = "okay";
+ };
};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index f9dcb61..ef5fed8 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -13,13 +13,26 @@
/dts-v1/;
/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
/ {
model = "Cubietech Cubietruck";
compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
soc@01c00000 {
+ ahci: sata@01c18000 {
+ target-supply = <&reg_ahci_5v>;
+ status = "okay";
+ };
+
pinctrl@01c20800 {
+ ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
+ allwinner,pins = "PH12";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
led_pins_cubietruck: led_pins@0 {
allwinner,pins = "PH7", "PH11", "PH20", "PH21";
allwinner,function = "gpio_out";
@@ -51,6 +64,18 @@
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
+
+ gmac: ethernet@01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
};
leds {
@@ -78,4 +103,10 @@
gpios = <&pio 7 7 0>;
};
};
+
+ reg_ahci_5v: ahci-5v {
+ pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
+ gpio = <&pio 7 12 0>;
+ status = "okay";
+ };
};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index ead3013..9b104ad 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -13,25 +13,16 @@
/dts-v1/;
/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
/ {
model = "Olimex A20-Olinuxino Micro";
compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
-
- mdio@01c0b080 {
+ ahci: sata@01c18000 {
+ target-supply = <&reg_ahci_5v>;
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
pinctrl@01c20800 {
@@ -78,6 +69,18 @@
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
+
+ gmac: ethernet@01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
};
leds {
@@ -91,4 +94,8 @@
default-state = "on";
};
};
+
+ reg_ahci_5v: ahci-5v {
+ status = "okay";
+ };
};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 6f25cf5..c16ef91 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -17,7 +17,15 @@
interrupt-parent = <&gic>;
aliases {
- ethernet0 = &emac;
+ ethernet0 = &gmac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ serial6 = &uart6;
+ serial7 = &uart7;
};
cpus {
@@ -41,6 +49,14 @@
reg = <0x40000000 0x80000000>;
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
@@ -305,6 +321,34 @@
};
/*
+ * The following two are dummy clocks, placeholders used in the gmac_tx
+ * clock. The gmac driver will choose one parent depending on the PHY
+ * interface mode, using clk_set_rate auto-reparenting.
+ * The actual TX clock rate is not controlled by the gmac_tx clock.
+ */
+ mii_phy_tx_clk: clk@2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ clock-output-names = "mii_phy_tx";
+ };
+
+ gmac_int_tx_clk: clk@3 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_int_tx";
+ };
+
+ gmac_tx_clk: clk@01c20164 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-gmac-clk";
+ reg = <0x01c20164 0x4>;
+ clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+ clock-output-names = "gmac_tx";
+ };
+
+ /*
* Dummy clock used by output clocks
*/
osc24M_32k: clk@1 {
@@ -355,6 +399,14 @@
#size-cells = <0>;
};
+ ahci: sata@01c18000 {
+ compatible = "allwinner,sun4i-a10-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <0 56 4>;
+ clocks = <&pll6 0>, <&ahb_gates 25>;
+ status = "disabled";
+ };
+
pio: pinctrl@01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
@@ -432,6 +484,32 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ gmac_pins_mii_a: gmac_mii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ allwinner,function = "gmac";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ gmac_pins_rgmii_a: gmac_rgmii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA10",
+ "PA11", "PA12", "PA13",
+ "PA15", "PA16";
+ allwinner,function = "gmac";
+ /*
+ * data lines in RGMII mode use DDR mode
+ * and need a higher signal drive strength
+ */
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
@@ -593,6 +671,21 @@
status = "disabled";
};
+ gmac: ethernet@01c50000 {
+ compatible = "allwinner,sun7i-a20-gmac";
+ reg = <0x01c50000 0x10000>;
+ interrupts = <0 85 4>;
+ interrupt-names = "macirq";
+ clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
+ clock-names = "stmmaceth", "allwinner_gmac_tx";
+ snps,pbl = <2>;
+ snps,fixed-burst;
+ snps,force_sf_dma_mode;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
hstimer@01c60000 {
compatible = "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
new file mode 100644
index 0000000..18eeac0
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -0,0 +1,75 @@
+/*
+ * sunxi boards common regulator (ahci target power supply, usb-vbus) code
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ soc@01c00000 {
+ pio: pinctrl@01c20800 {
+ ahci_pwr_pin_a: ahci_pwr_pin@0 {
+ allwinner,pins = "PB8";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ usb1_vbus_pin_a: usb1_vbus_pin@0 {
+ allwinner,pins = "PH6";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ usb2_vbus_pin_a: usb2_vbus_pin@0 {
+ allwinner,pins = "PH3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+ };
+
+ reg_ahci_5v: ahci-5v {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ahci_pwr_pin_a>;
+ regulator-name = "ahci-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pio 1 8 0>;
+ status = "disabled";
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_vbus_pin_a>;
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pio 7 6 0>;
+ status = "disabled";
+ };
+
+ reg_usb2_vbus: usb2-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_vbus_pin_a>;
+ regulator-name = "usb2-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pio 7 3 0>;
+ status = "disabled";
+ };
+};
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 868429a..10a9c25 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -106,6 +106,15 @@ config AHCI_IMX
If unsure, say N.
+config AHCI_SUNXI
+ tristate "Allwinner sunxi AHCI SATA support"
+ depends on ARCH_SUNXI && SATA_AHCI_PLATFORM
+ help
+ This option enables support for the Allwinner sunxi SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 46518c6..246050b 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o
+obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c81d809..8bfc477 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -578,6 +578,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
bool online;
int rc;
@@ -588,7 +589,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline, &online, NULL);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
@@ -603,6 +604,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
{
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
@@ -618,7 +620,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline, &online, NULL);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
/* The pseudo configuration device on SIMG4726 attached to
* ASUS P5W-DH Deluxe doesn't send signature FIS after
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 2289efd..3ab7ac9 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -37,6 +37,8 @@
#include <linux/clk.h>
#include <linux/libata.h>
+#include <linux/phy/phy.h>
+#include <linux/regulator/consumer.h>
/* Enclosure Management Control */
#define EM_CTRL_MSG_TYPE 0x000f0000
@@ -51,6 +53,7 @@
enum {
AHCI_MAX_PORTS = 32,
+ AHCI_MAX_CLKS = 3,
AHCI_MAX_SG = 168, /* hardware max is 64K */
AHCI_DMA_BOUNDARY = 0xffffffff,
AHCI_MAX_CMDS = 32,
@@ -321,8 +324,16 @@ struct ahci_host_priv {
u32 em_loc; /* enclosure management location */
u32 em_buf_sz; /* EM buffer size in byte */
u32 em_msg_type; /* EM message type */
- struct clk *clk; /* Only for platforms supporting clk */
+ struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
+ struct regulator *target_pwr; /* Optional */
+ struct phy *phy; /* If platform uses phy */
void *plat_data; /* Other platform data */
+ /*
+ * Optional ahci_start_engine override, if not set this gets set to the
+ * default ahci_start_engine during ahci_save_initial_config, this can
+ * be overridden anytime before the host is activated.
+ */
+ void (*start_engine)(struct ata_port *ap);
};
extern int ahci_ignore_sss;
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 4b231ba..ecacd4d 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
+#include <linux/phy/phy.h>
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
@@ -87,78 +88,275 @@ static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT("ahci_platform"),
};
-static int ahci_probe(struct platform_device *pdev)
+/**
+ * ahci_platform_enable_clks - Enable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all the clks found in hpriv->clks, starting at
+ * index 0. If any clk fails to enable it disables all the clks already
+ * enabled in reverse order, and then returns an error.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
+{
+ int c, rc;
+
+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
+ rc = clk_prepare_enable(hpriv->clks[c]);
+ if (rc)
+ goto disable_unprepare_clk;
+ }
+ return 0;
+
+disable_unprepare_clk:
+ while (--c >= 0)
+ clk_disable_unprepare(hpriv->clks[c]);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
+
+/**
+ * ahci_platform_disable_clks - Disable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all the clks found in hpriv->clks, in reverse
+ * order of ahci_platform_enable_clks (starting at the end of the array).
+ */
+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
+{
+ int c;
+
+ for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
+ if (hpriv->clks[c])
+ clk_disable_unprepare(hpriv->clks[c]);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
+
+/**
+ * ahci_platform_enable_resources - Enable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all ahci_platform managed resources in the
+ * following order:
+ * 1) Regulator
+ * 2) Clocks (through ahci_platform_enable_clks)
+ * 3) Phy
+ *
+ * If resource enabling fails at any point the previous enabled resources
+ * are disabled in reverse order.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
{
- struct device *dev = &pdev->dev;
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
- const struct platform_device_id *id = platform_get_device_id(pdev);
- struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
- const struct ata_port_info *ppi[] = { &pi, NULL };
- struct ahci_host_priv *hpriv;
- struct ata_host *host;
- struct resource *mem;
- int irq;
- int n_ports;
- int i;
int rc;
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(dev, "no mmio space\n");
- return -EINVAL;
+ if (hpriv->target_pwr) {
+ rc = regulator_enable(hpriv->target_pwr);
+ if (rc)
+ return rc;
}
- irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- dev_err(dev, "no irq\n");
- return -EINVAL;
+ rc = ahci_platform_enable_clks(hpriv);
+ if (rc)
+ goto disable_regulator;
+
+ if (hpriv->phy) {
+ rc = phy_init(hpriv->phy);
+ if (rc)
+ goto disable_clks;
+
+ rc = phy_power_on(hpriv->phy);
+ if (rc) {
+ phy_exit(hpriv->phy);
+ goto disable_clks;
+ }
}
- if (pdata && pdata->ata_port_info)
- pi = *pdata->ata_port_info;
+ return 0;
- hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
- if (!hpriv) {
- dev_err(dev, "can't alloc ahci_host_priv\n");
- return -ENOMEM;
+disable_clks:
+ ahci_platform_disable_clks(hpriv);
+
+disable_regulator:
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
+
+/**
+ * ahci_platform_disable_resources - Disable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all ahci_platform managed resources in the
+ * following order:
+ * 1) Phy
+ * 2) Clocks (through ahci_platform_disable_clks)
+ * 3) Regulator
+ */
+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
+{
+ if (hpriv->phy) {
+ phy_power_off(hpriv->phy);
+ phy_exit(hpriv->phy);
}
- hpriv->flags |= (unsigned long)pi.private_data;
+ ahci_platform_disable_clks(hpriv);
- hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
+
+static void ahci_platform_put_resources(struct device *dev, void *res)
+{
+ struct ahci_host_priv *hpriv = res;
+ int c;
+
+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
+ clk_put(hpriv->clks[c]);
+}
+
+/**
+ * ahci_platform_get_resources - Get platform resources
+ * @pdev: platform device to get resources for
+ *
+ * This function allocates an ahci_host_priv struct, and gets the following
+ * resources, storing a reference to them inside the returned struct:
+ *
+ * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
+ * 2) regulator for controlling the targets power (optional)
+ * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
+ * or for non devicetree enabled platforms a single clock
+ * 4) phy (optional)
+ *
+ * RETURNS:
+ * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
+ */
+struct ahci_host_priv *ahci_platform_get_resources(
+ struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct clk *clk;
+ int i, rc = -ENOMEM;
+
+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
+ return ERR_PTR(-ENOMEM);
+
+ hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
+ GFP_KERNEL);
+ if (!hpriv)
+ goto err_out;
+
+ devres_add(dev, hpriv);
+
+ hpriv->mmio = devm_ioremap_resource(dev,
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
if (!hpriv->mmio) {
- dev_err(dev, "can't map %pR\n", mem);
- return -ENOMEM;
+ dev_err(dev, "no mmio space\n");
+ goto err_out;
}
- hpriv->clk = clk_get(dev, NULL);
- if (IS_ERR(hpriv->clk)) {
- dev_err(dev, "can't get clock\n");
- } else {
- rc = clk_prepare_enable(hpriv->clk);
- if (rc) {
- dev_err(dev, "clock prepare enable failed");
- goto free_clk;
+ hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
+ if (IS_ERR(hpriv->target_pwr)) {
+ rc = PTR_ERR(hpriv->target_pwr);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
+ hpriv->target_pwr = NULL;
+ }
+
+ for (i = 0; i < AHCI_MAX_CLKS; i++) {
+ /*
+ * For now we must use clk_get(dev, NULL) for the first clock,
+ * because some platforms (da850, spear13xx) are not yet
+ * converted to use devicetree for clocks. For new platforms
+ * this is equivalent to of_clk_get(dev->of_node, 0).
+ */
+ if (i == 0)
+ clk = clk_get(dev, NULL);
+ else
+ clk = of_clk_get(dev->of_node, i);
+
+ if (IS_ERR(clk)) {
+ rc = PTR_ERR(clk);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
+ break;
}
+ hpriv->clks[i] = clk;
}
- /*
- * Some platforms might need to prepare for mmio region access,
- * which could be done in the following init call. So, the mmio
- * region shouldn't be accessed before init (if provided) has
- * returned successfully.
- */
- if (pdata && pdata->init) {
- rc = pdata->init(dev, hpriv->mmio);
- if (rc)
- goto disable_unprepare_clk;
+ hpriv->phy = devm_phy_get(dev, "sata-phy");
+ if (IS_ERR(hpriv->phy)) {
+ rc = PTR_ERR(hpriv->phy);
+ switch (rc) {
+ case -ENODEV:
+ case -ENOSYS:
+ /* continue normally */
+ hpriv->phy = NULL;
+ break;
+
+ case -EPROBE_DEFER:
+ goto err_out;
+
+ default:
+ dev_err(dev, "couldn't get sata-phy\n");
+ goto err_out;
+ }
}
- ahci_save_initial_config(dev, hpriv,
- pdata ? pdata->force_port_map : 0,
- pdata ? pdata->mask_port_map : 0);
+ devres_remove_group(dev, NULL);
+ return hpriv;
+
+err_out:
+ devres_release_group(dev, NULL);
+ return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
+
+/**
+ * ahci_platform_init_host - Bring up an ahci-platform host
+ * @pdev: platform device pointer for the host
+ * @hpriv: ahci-host private data for the host
+ * @pi_template: template for the ata_port_info to use
+ * @force_port_map: param passed to ahci_save_initial_config
+ * @mask_port_map: param passed to ahci_save_initial_config
+ *
+ * This function does all the usual steps needed to bring up an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be initialized / enabled before calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_init_host(struct platform_device *pdev,
+ struct ahci_host_priv *hpriv,
+ const struct ata_port_info *pi_template,
+ unsigned int force_port_map,
+ unsigned int mask_port_map)
+{
+ struct device *dev = &pdev->dev;
+ struct ata_port_info pi = *pi_template;
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct ata_host *host;
+ int i, irq, n_ports, rc;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(dev, "no irq\n");
+ return -EINVAL;
+ }
/* prepare host */
+ hpriv->flags |= (unsigned long)pi.private_data;
+
+ ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map);
+
if (hpriv->cap & HOST_CAP_NCQ)
pi.flags |= ATA_FLAG_NCQ;
@@ -175,10 +373,8 @@ static int ahci_probe(struct platform_device *pdev)
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
host = ata_host_alloc_pinfo(dev, ppi, n_ports);
- if (!host) {
- rc = -ENOMEM;
- goto pdata_exit;
- }
+ if (!host)
+ return -ENOMEM;
host->private_data = hpriv;
@@ -193,7 +389,8 @@ static int ahci_probe(struct platform_device *pdev)
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
- ata_port_desc(ap, "mmio %pR", mem);
+ ata_port_desc(ap, "mmio %pR",
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
/* set enclosure management message type */
@@ -207,13 +404,53 @@ static int ahci_probe(struct platform_device *pdev)
rc = ahci_reset_controller(host);
if (rc)
- goto pdata_exit;
+ return rc;
ahci_init_controller(host);
ahci_print_info(host, "platform");
- rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
- &ahci_platform_sht);
+ return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
+ &ahci_platform_sht);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_init_host);
+
+static int ahci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ const struct platform_device_id *id = platform_get_device_id(pdev);
+ const struct ata_port_info *pi_template;
+ struct ahci_host_priv *hpriv;
+ int rc;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ /*
+ * Some platforms might need to prepare for mmio region access,
+ * which could be done in the following init call. So, the mmio
+ * region shouldn't be accessed before init (if provided) has
+ * returned successfully.
+ */
+ if (pdata && pdata->init) {
+ rc = pdata->init(dev, hpriv->mmio);
+ if (rc)
+ goto disable_resources;
+ }
+
+ if (pdata && pdata->ata_port_info)
+ pi_template = pdata->ata_port_info;
+ else
+ pi_template = &ahci_port_info[id ? id->driver_data : 0];
+
+ rc = ahci_platform_init_host(pdev, hpriv, pi_template,
+ pdata ? pdata->force_port_map : 0,
+ pdata ? pdata->mask_port_map : 0);
if (rc)
goto pdata_exit;
@@ -221,12 +458,8 @@ static int ahci_probe(struct platform_device *pdev)
pdata_exit:
if (pdata && pdata->exit)
pdata->exit(dev);
-disable_unprepare_clk:
- if (!IS_ERR(hpriv->clk))
- clk_disable_unprepare(hpriv->clk);
-free_clk:
- if (!IS_ERR(hpriv->clk))
- clk_put(hpriv->clk);
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
return rc;
}
@@ -239,21 +472,27 @@ static void ahci_host_stop(struct ata_host *host)
if (pdata && pdata->exit)
pdata->exit(dev);
- if (!IS_ERR(hpriv->clk)) {
- clk_disable_unprepare(hpriv->clk);
- clk_put(hpriv->clk);
- }
+ ahci_platform_disable_resources(hpriv);
}
#ifdef CONFIG_PM_SLEEP
-static int ahci_suspend(struct device *dev)
+/**
+ * ahci_platform_suspend_host - Suspend an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to suspend an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be disabled after calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend_host(struct device *dev)
{
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
u32 ctl;
- int rc;
if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
dev_err(dev, "firmware update required for suspend/resume\n");
@@ -270,61 +509,113 @@ static int ahci_suspend(struct device *dev)
writel(ctl, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
- rc = ata_host_suspend(host, PMSG_SUSPEND);
+ return ata_host_suspend(host, PMSG_SUSPEND);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
+
+/**
+ * ahci_platform_resume_host - Resume an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to resume an ahci-platform
+ * host, note any necessary resources (ie clks, phy, etc.) must be
+ * initialized / enabled before calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume_host(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ int rc;
+
+ if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ }
+
+ ata_host_resume(host);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
+
+/**
+ * ahci_platform_suspend - Suspend an ahci-platform device
+ * @dev: the platform device to suspend
+ *
+ * This function suspends the host associated with the device, followed by
+ * disabling all the resources of the device.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend(struct device *dev)
+{
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ rc = ahci_platform_suspend_host(dev);
if (rc)
return rc;
if (pdata && pdata->suspend)
return pdata->suspend(dev);
- if (!IS_ERR(hpriv->clk))
- clk_disable_unprepare(hpriv->clk);
+ ahci_platform_disable_resources(hpriv);
return 0;
}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend);
-static int ahci_resume(struct device *dev)
+/**
+ * ahci_platform_resume - Resume an ahci-platform device
+ * @dev: the platform device to resume
+ *
+ * This function enables all the resources of the device followed by
+ * resuming the host associated with the device.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume(struct device *dev)
{
struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
int rc;
- if (!IS_ERR(hpriv->clk)) {
- rc = clk_prepare_enable(hpriv->clk);
- if (rc) {
- dev_err(dev, "clock prepare enable failed");
- return rc;
- }
- }
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
if (pdata && pdata->resume) {
rc = pdata->resume(dev);
if (rc)
- goto disable_unprepare_clk;
- }
-
- if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
- rc = ahci_reset_controller(host);
- if (rc)
- goto disable_unprepare_clk;
-
- ahci_init_controller(host);
+ goto disable_resources;
}
- ata_host_resume(host);
+ rc = ahci_platform_resume_host(dev);
+ if (rc)
+ goto disable_resources;
return 0;
-disable_unprepare_clk:
- if (!IS_ERR(hpriv->clk))
- clk_disable_unprepare(hpriv->clk);
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
return rc;
}
+EXPORT_SYMBOL_GPL(ahci_platform_resume);
#endif
-static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume);
+static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
+ ahci_platform_resume);
static const struct of_device_id ahci_of_match[] = {
{ .compatible = "snps,spear-ahci", },
diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c
new file mode 100644
index 0000000..42d3f64
--- /dev/null
+++ b/drivers/ata/ahci_sunxi.c
@@ -0,0 +1,249 @@
+/*
+ * Allwinner sunxi AHCI SATA platform driver
+ * Copyright 2013 Olliver Schinagl <oliver@schinagl.nl>
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
+ * Based on code from Allwinner Technology Co., Ltd. <www.allwinnertech.com>,
+ * Daniel Wang <danielwang@allwinnertech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/ahci_platform.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include "ahci.h"
+
+#define AHCI_BISTAFR 0x00a0
+#define AHCI_BISTCR 0x00a4
+#define AHCI_BISTFCTR 0x00a8
+#define AHCI_BISTSR 0x00ac
+#define AHCI_BISTDECR 0x00b0
+#define AHCI_DIAGNR0 0x00b4
+#define AHCI_DIAGNR1 0x00b8
+#define AHCI_OOBR 0x00bc
+#define AHCI_PHYCS0R 0x00c0
+#define AHCI_PHYCS1R 0x00c4
+#define AHCI_PHYCS2R 0x00c8
+#define AHCI_TIMER1MS 0x00e0
+#define AHCI_GPARAM1R 0x00e8
+#define AHCI_GPARAM2R 0x00ec
+#define AHCI_PPARAMR 0x00f0
+#define AHCI_TESTR 0x00f4
+#define AHCI_VERSIONR 0x00f8
+#define AHCI_IDR 0x00fc
+#define AHCI_RWCR 0x00fc
+#define AHCI_P0DMACR 0x0170
+#define AHCI_P0PHYCR 0x0178
+#define AHCI_P0PHYSR 0x017c
+
+static void sunxi_clrbits(void __iomem *reg, u32 clr_val)
+{
+ u32 reg_val;
+
+ reg_val = readl(reg);
+ reg_val &= ~(clr_val);
+ writel(reg_val, reg);
+}
+
+static void sunxi_setbits(void __iomem *reg, u32 set_val)
+{
+ u32 reg_val;
+
+ reg_val = readl(reg);
+ reg_val |= set_val;
+ writel(reg_val, reg);
+}
+
+static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val)
+{
+ u32 reg_val;
+
+ reg_val = readl(reg);
+ reg_val &= ~(clr_val);
+ reg_val |= set_val;
+ writel(reg_val, reg);
+}
+
+static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift)
+{
+ return (readl(reg) >> shift) & mask;
+}
+
+static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
+{
+ u32 reg_val;
+ int timeout;
+
+ /* This magic is from the original code */
+ writel(0, reg_base + AHCI_RWCR);
+ msleep(5);
+
+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
+ (0x7 << 24),
+ (0x5 << 24) | BIT(23) | BIT(18));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS1R,
+ (0x3 << 16) | (0x1f << 8) | (0x3 << 6),
+ (0x2 << 16) | (0x6 << 8) | (0x2 << 6));
+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15));
+ sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
+ (0x7 << 20), (0x3 << 20));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
+ (0x1f << 5), (0x19 << 5));
+ msleep(5);
+
+ sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
+
+ timeout = 250; /* Power up takes aprox 50 us */
+ do {
+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28);
+ if (reg_val == 0x02)
+ break;
+
+ if (--timeout == 0) {
+ dev_err(dev, "PHY power up failed.\n");
+ return -EIO;
+ }
+ udelay(1);
+ } while (1);
+
+ sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24));
+
+ timeout = 100; /* Calibration takes aprox 10 us */
+ do {
+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24);
+ if (reg_val == 0x00)
+ break;
+
+ if (--timeout == 0) {
+ dev_err(dev, "PHY calibration failed.\n");
+ return -EIO;
+ }
+ udelay(1);
+ } while (1);
+
+ msleep(15);
+
+ writel(0x7, reg_base + AHCI_RWCR);
+
+ return 0;
+}
+
+static void ahci_sunxi_start_engine(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ /* Setup DMA before DMA start */
+ sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ff00, 0x00004400);
+
+ /* Start DMA */
+ sunxi_setbits(port_mmio + PORT_CMD, PORT_CMD_START);
+}
+
+static const struct ata_port_info ahci_sunxi_port_info = {
+ AHCI_HFLAGS(AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
+ AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ),
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_platform_ops,
+};
+
+static int ahci_sunxi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ int rc;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ hpriv->start_engine = ahci_sunxi_start_engine;
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ rc = ahci_sunxi_phy_init(dev, hpriv->mmio);
+ if (rc)
+ goto disable_resources;
+
+ rc = ahci_platform_init_host(pdev, hpriv, &ahci_sunxi_port_info, 0, 0);
+ if (rc)
+ goto disable_resources;
+
+ return 0;
+
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+ return rc;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ahci_sunxi_resume(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ rc = ahci_sunxi_phy_init(dev, hpriv->mmio);
+ if (rc)
+ goto disable_resources;
+
+ rc = ahci_platform_resume_host(dev);
+ if (rc)
+ goto disable_resources;
+
+ return 0;
+
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+ return rc;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ahci_sunxi_pm_ops, ahci_platform_suspend,
+ ahci_sunxi_resume);
+
+static const struct of_device_id ahci_sunxi_of_match[] = {
+ { .compatible = "allwinner,sun4i-a10-ahci", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ahci_sunxi_of_match);
+
+static struct platform_driver ahci_sunxi_driver = {
+ .probe = ahci_sunxi_probe,
+ .remove = ata_platform_remove_one,
+ .driver = {
+ .name = "ahci-sunxi",
+ .owner = THIS_MODULE,
+ .of_match_table = ahci_sunxi_of_match,
+ .pm = &ahci_sunxi_pm_ops,
+ },
+};
+module_platform_driver(ahci_sunxi_driver);
+
+MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA driver");
+MODULE_AUTHOR("Olliver Schinagl <oliver@schinagl.nl>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 36605ab..f839bb3 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -394,6 +394,9 @@ static ssize_t ahci_show_em_supported(struct device *dev,
*
* If inconsistent, config values are fixed up by this function.
*
+ * If it is not set already this function sets hpriv->start_engine to
+ * ahci_start_engine.
+ *
* LOCKING:
* None.
*/
@@ -500,6 +503,9 @@ void ahci_save_initial_config(struct device *dev,
hpriv->cap = cap;
hpriv->cap2 = cap2;
hpriv->port_map = port_map;
+
+ if (!hpriv->start_engine)
+ hpriv->start_engine = ahci_start_engine;
}
EXPORT_SYMBOL_GPL(ahci_save_initial_config);
@@ -766,7 +772,7 @@ static void ahci_start_port(struct ata_port *ap)
/* enable DMA */
if (!(hpriv->flags & AHCI_HFLAG_DELAY_ENGINE))
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
/* turn on LEDs */
if (ap->flags & ATA_FLAG_EM) {
@@ -1234,7 +1240,7 @@ int ahci_kick_engine(struct ata_port *ap)
/* restart engine */
out_restart:
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
return rc;
}
EXPORT_SYMBOL_GPL(ahci_kick_engine);
@@ -1426,6 +1432,7 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
@@ -1443,7 +1450,7 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
rc = sata_link_hardreset(link, timing, deadline, &online,
ahci_check_ready);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
if (online)
*class = ahci_dev_classify(ap);
@@ -2007,10 +2014,12 @@ static void ahci_thaw(struct ata_port *ap)
void ahci_error_handler(struct ata_port *ap)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
/* restart engine */
ahci_stop_engine(ap);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
}
sata_pmp_error_handler(ap);
@@ -2031,6 +2040,7 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
struct ata_device *dev = ap->link.device;
u32 devslp, dm, dito, mdat, deto;
@@ -2094,7 +2104,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
PORT_DEVSLP_ADSE);
writel(devslp, port_mmio + PORT_DEVSLP);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
/* enable device sleep feature for the drive */
err_mask = ata_dev_set_feature(dev,
@@ -2106,6 +2116,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
static void ahci_enable_fbs(struct ata_port *ap)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
struct ahci_port_priv *pp = ap->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 fbs;
@@ -2134,11 +2145,12 @@ static void ahci_enable_fbs(struct ata_port *ap)
} else
dev_err(ap->host->dev, "Failed to enable FBS\n");
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
}
static void ahci_disable_fbs(struct ata_port *ap)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
struct ahci_port_priv *pp = ap->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 fbs;
@@ -2166,7 +2178,7 @@ static void ahci_disable_fbs(struct ata_port *ap)
pp->fbs_enabled = false;
}
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
}
static void ahci_pmp_attach(struct ata_port *ap)
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index 870b11e..b3b18d1 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -403,6 +403,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
static const unsigned long timing[] = { 5, 100, 500};
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
@@ -431,7 +432,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
break;
} while (!online && retry--);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
if (online)
*class = ahci_dev_classify(ap);
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index abb6c5a..a4b5025 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -51,6 +51,8 @@ static void __init sun4i_osc_clk_setup(struct device_node *node)
if (!gate)
goto err_free_fixed;
+ of_property_read_string(node, "clock-output-names", &clk_name);
+
/* set up gate and fixed rate properties */
gate->reg = of_iomap(node, 0);
gate->bit_idx = SUNXI_OSC24M_GATE;
@@ -249,7 +251,38 @@ static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate,
*n = DIV_ROUND_UP(div, (*k+1));
}
+/**
+ * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6
+ * PLL6 rate is calculated as follows
+ * rate = parent_rate * n * (k + 1) / 2
+ * parent_rate is always 24Mhz
+ */
+
+static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p)
+{
+ u8 div;
+
+ /*
+ * We always have 24MHz / 2, so we can just say that our
+ * parent clock is 12MHz.
+ */
+ parent_rate = parent_rate / 2;
+
+ /* Normalize value to a parent_rate multiple (24M / 2) */
+ div = *freq / parent_rate;
+ *freq = parent_rate * div;
+ /* we were called to round the frequency, we can now return */
+ if (n == NULL)
+ return;
+
+ *k = div / 32;
+ if (*k > 3)
+ *k = 3;
+
+ *n = DIV_ROUND_UP(div, (*k+1));
+}
/**
* sun4i_get_apb1_factors() - calculates m, p factors for APB1
@@ -265,7 +298,7 @@ static void sun4i_get_apb1_factors(u32 *freq, u32 parent_rate,
if (parent_rate < *freq)
*freq = parent_rate;
- parent_rate = (parent_rate + (*freq - 1)) / *freq;
+ parent_rate = DIV_ROUND_UP(parent_rate, *freq);
/* Invalid rate! */
if (parent_rate > 32)
@@ -310,7 +343,7 @@ static void sun4i_get_mod0_factors(u32 *freq, u32 parent_rate,
if (*freq > parent_rate)
*freq = parent_rate;
- div = parent_rate / *freq;
+ div = DIV_ROUND_UP(parent_rate, *freq);
if (div < 16)
calcp = 0;
@@ -351,7 +384,7 @@ static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate,
if (*freq > parent_rate)
*freq = parent_rate;
- div = parent_rate / *freq;
+ div = DIV_ROUND_UP(parent_rate, *freq);
if (div < 32)
calcp = 0;
@@ -377,6 +410,102 @@ static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate,
/**
+ * sun7i_a20_gmac_clk_setup - Setup function for A20/A31 GMAC clock module
+ *
+ * This clock looks something like this
+ * ________________________
+ * MII TX clock from PHY >-----|___________ _________|----> to GMAC core
+ * GMAC Int. RGMII TX clk >----|___________\__/__gate---|----> to PHY
+ * Ext. 125MHz RGMII TX clk >--|__divider__/ |
+ * |________________________|
+ *
+ * The external 125 MHz reference is optional, i.e. GMAC can use its
+ * internal TX clock just fine. The A31 GMAC clock module does not have
+ * the divider controls for the external reference.
+ *
+ * To keep it simple, let the GMAC use either the MII TX clock for MII mode,
+ * and its internal TX clock for GMII and RGMII modes. The GMAC driver should
+ * select the appropriate source and gate/ungate the output to the PHY.
+ *
+ * Only the GMAC should use this clock. Altering the clock so that it doesn't
+ * match the GMAC's operation parameters will result in the GMAC not being
+ * able to send traffic out. The GMAC driver should set the clock rate and
+ * enable/disable this clock to configure the required state. The clock
+ * driver then responds by auto-reparenting the clock.
+ */
+
+#define SUN7I_A20_GMAC_GPIT 2
+#define SUN7I_A20_GMAC_MASK 0x3
+#define SUN7I_A20_GMAC_PARENTS 2
+
+static void __init sun7i_a20_gmac_clk_setup(struct device_node *node)
+{
+ struct clk *clk;
+ struct clk_mux *mux;
+ struct clk_gate *gate;
+ const char *clk_name = node->name;
+ const char *parents[SUN7I_A20_GMAC_PARENTS];
+ void *reg;
+
+ if (of_property_read_string(node, "clock-output-names", &clk_name))
+ return;
+
+ /* allocate mux and gate clock structs */
+ mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
+ if (!mux)
+ return;
+
+ gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+ if (!gate)
+ goto free_mux;
+
+ /* gmac clock requires exactly 2 parents */
+ parents[0] = of_clk_get_parent_name(node, 0);
+ parents[1] = of_clk_get_parent_name(node, 1);
+ if (!parents[0] || !parents[1])
+ goto free_gate;
+
+ reg = of_iomap(node, 0);
+ if (!reg)
+ goto free_gate;
+
+ /* set up gate and fixed rate properties */
+ gate->reg = reg;
+ gate->bit_idx = SUN7I_A20_GMAC_GPIT;
+ gate->lock = &clk_lock;
+ mux->reg = reg;
+ mux->mask = SUN7I_A20_GMAC_MASK;
+ mux->flags = CLK_MUX_INDEX_BIT;
+ mux->lock = &clk_lock;
+
+ clk = clk_register_composite(NULL, clk_name,
+ parents, SUN7I_A20_GMAC_PARENTS,
+ &mux->hw, &clk_mux_ops,
+ NULL, NULL,
+ &gate->hw, &clk_gate_ops,
+ 0);
+
+ if (IS_ERR(clk))
+ goto iounmap_reg;
+
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+
+ return;
+
+iounmap_reg:
+ iounmap(reg);
+free_gate:
+ kfree(gate);
+free_mux:
+ kfree(mux);
+}
+CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk",
+ sun7i_a20_gmac_clk_setup);
+
+
+
+/**
* sunxi_factors_clk_setup() - Setup function for factor clocks
*/
@@ -387,6 +516,7 @@ struct factors_data {
int mux;
struct clk_factors_config *table;
void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p);
+ const char *name;
};
static struct clk_factors_config sun4i_pll1_config = {
@@ -416,6 +546,13 @@ static struct clk_factors_config sun4i_pll5_config = {
.kwidth = 2,
};
+static struct clk_factors_config sun6i_a31_pll6_config = {
+ .nshift = 8,
+ .nwidth = 5,
+ .kshift = 4,
+ .kwidth = 2,
+};
+
static struct clk_factors_config sun4i_apb1_config = {
.mshift = 0,
.mwidth = 5,
@@ -455,6 +592,20 @@ static const struct factors_data sun4i_pll5_data __initconst = {
.enable = 31,
.table = &sun4i_pll5_config,
.getter = sun4i_get_pll5_factors,
+ .name = "pll5",
+};
+
+static const struct factors_data sun4i_pll6_data __initconst = {
+ .enable = 31,
+ .table = &sun4i_pll5_config,
+ .getter = sun4i_get_pll5_factors,
+ .name = "pll6",
+};
+
+static const struct factors_data sun6i_a31_pll6_data __initconst = {
+ .enable = 31,
+ .table = &sun6i_a31_pll6_config,
+ .getter = sun6i_a31_get_pll6_factors,
};
static const struct factors_data sun4i_apb1_data __initconst = {
@@ -497,14 +648,14 @@ static struct clk * __init sunxi_factors_clk_setup(struct device_node *node,
(parents[i] = of_clk_get_parent_name(node, i)) != NULL)
i++;
- /* Nodes should be providing the name via clock-output-names
- * but originally our dts didn't, and so we used node->name.
- * The new, better nodes look like clk@deadbeef, so we pull the
- * name just in this case */
- if (!strcmp("clk", clk_name)) {
- of_property_read_string_index(node, "clock-output-names",
- 0, &clk_name);
- }
+ /*
+ * some factor clocks, such as pll5 and pll6, may have multiple
+ * outputs, and have their name designated in factors_data
+ */
+ if (data->name)
+ clk_name = data->name;
+ else
+ of_property_read_string(node, "clock-output-names", &clk_name);
factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
if (!factors)
@@ -601,6 +752,8 @@ static void __init sunxi_mux_clk_setup(struct device_node *node,
(parents[i] = of_clk_get_parent_name(node, i)) != NULL)
i++;
+ of_property_read_string(node, "clock-output-names", &clk_name);
+
clk = clk_register_mux(NULL, clk_name, parents, i,
CLK_SET_RATE_NO_REPARENT, reg,
data->shift, SUNXI_MUX_GATE_WIDTH,
@@ -660,6 +813,8 @@ static void __init sunxi_divider_clk_setup(struct device_node *node,
clk_parent = of_clk_get_parent_name(node, 0);
+ of_property_read_string(node, "clock-output-names", &clk_name);
+
clk = clk_register_divider(NULL, clk_name, clk_parent, 0,
reg, data->shift, data->width,
data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0,
@@ -832,7 +987,7 @@ static const struct divs_data pll5_divs_data __initconst = {
};
static const struct divs_data pll6_divs_data __initconst = {
- .factors = &sun4i_pll5_data,
+ .factors = &sun4i_pll6_data,
.div = {
{ .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */
{ .fixed = 2 }, /* P, other */
@@ -854,7 +1009,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
struct divs_data *data)
{
struct clk_onecell_data *clk_data;
- const char *parent = node->name;
+ const char *parent;
const char *clk_name;
struct clk **clks, *pclk;
struct clk_hw *gate_hw, *rate_hw;
@@ -868,6 +1023,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
/* Set up factor clock that we will be dividing */
pclk = sunxi_factors_clk_setup(node, data->factors);
+ parent = __clk_get_name(pclk);
reg = of_iomap(node, 0);
@@ -972,6 +1128,7 @@ free_clkdata:
static const struct of_device_id clk_factors_match[] __initconst = {
{.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,},
{.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
+ {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,},
{.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,},
{.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,},
{.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,},
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index 73a2500..542f268 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -19,7 +19,15 @@
struct device;
struct ata_port_info;
+struct ahci_host_priv;
+struct platform_device;
+/*
+ * Note ahci_platform_data is deprecated, it is only kept around for use
+ * by the old da850 and spear13xx ahci code.
+ * New drivers should instead declare their own platform_driver struct, and
+ * use ahci_platform* functions in their own probe, suspend and resume methods.
+ */
struct ahci_platform_data {
int (*init)(struct device *dev, void __iomem *addr);
void (*exit)(struct device *dev);
@@ -30,4 +38,21 @@ struct ahci_platform_data {
unsigned int mask_port_map;
};
+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv);
+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv);
+struct ahci_host_priv *ahci_platform_get_resources(
+ struct platform_device *pdev);
+int ahci_platform_init_host(struct platform_device *pdev,
+ struct ahci_host_priv *hpriv,
+ const struct ata_port_info *pi_template,
+ unsigned int force_port_map,
+ unsigned int mask_port_map);
+
+int ahci_platform_suspend_host(struct device *dev);
+int ahci_platform_resume_host(struct device *dev);
+int ahci_platform_suspend(struct device *dev);
+int ahci_platform_resume(struct device *dev);
+
#endif /* _AHCI_PLATFORM_H */
View Git Blame Copy Permalink