172 lines
5.3 KiB
Diff
172 lines
5.3 KiB
Diff
From: Roger Shimizu <rogershimizu@gmail.com>
|
|
Date: Wed, 30 Mar 2016 01:11:45 +0900
|
|
Subject: [PATCH] ARM: dts: orion5x: add device tree for kurobox-pro
|
|
Origin: http://git.infradead.org/linux-mvebu.git/commitdiff/452cc94458237d4a26aa1e08f23f57f072368e4e
|
|
|
|
Add dts file to support Buffalo/Revogear Kurobox-Pro, which is marvell
|
|
orion5x based 3.5" HDD NAS.
|
|
|
|
It's a quite old product and already discontinued. So there's no
|
|
official website for it. But it was an early product which used marvell
|
|
orion5x 88F5182 chipset, it's popular in the community.
|
|
Some unofficial site:
|
|
- http://buffalo.nas-central.org/wiki/Category:KuroboxPro
|
|
- http://nice.kaze.com/KUROPRO_ProductSpecifications.pdf
|
|
|
|
This device tree is based on the board file:
|
|
arch/arm/mach-orion5x/kurobox_pro-setup.c
|
|
However, the probing order of NAND and JEDEC-Flash are different from
|
|
the original board file, this results in incompatible minor number
|
|
for a few /dev/mtdX and /dev/mtdblockX devices.
|
|
So I still want to keep the board file for the time being.
|
|
|
|
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
|
|
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
|
|
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 1 +
|
|
arch/arm/boot/dts/orion5x-kuroboxpro.dts | 127 +++++++++++++++++++++++++++++++
|
|
2 files changed, 128 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/orion5x-kuroboxpro.dts
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -517,6 +517,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
|
|
dra7-evm.dtb \
|
|
dra72-evm.dtb
|
|
dtb-$(CONFIG_ARCH_ORION5X) += \
|
|
+ orion5x-kuroboxpro.dtb \
|
|
orion5x-lacie-d2-network.dtb \
|
|
orion5x-lacie-ethernet-disk-mini-v2.dtb \
|
|
orion5x-linkstation-lsgl.dtb \
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/orion5x-kuroboxpro.dts
|
|
@@ -0,0 +1,127 @@
|
|
+/*
|
|
+ * Device Tree file for Buffalo/Revogear Kurobox Pro
|
|
+ *
|
|
+ * Copyright (C) 2016
|
|
+ * Roger Shimizu <rogershimizu@gmail.com>
|
|
+ *
|
|
+ * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c
|
|
+ * Copyright (C) Ronen Shitrit <rshitrit@marvell.com>
|
|
+ *
|
|
+ * This file is dual-licensed: you can use it either under the terms
|
|
+ * of the GPL or the X11 license, at your option. Note that this dual
|
|
+ * licensing only applies to this file, and not this project as a
|
|
+ * whole.
|
|
+ *
|
|
+ * a) This file is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License as
|
|
+ * published by the Free Software Foundation; either version 2 of the
|
|
+ * License, or (at your option) any later version.
|
|
+ *
|
|
+ * This file is distributed in the hope that it will be useful
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * Or, alternatively
|
|
+ *
|
|
+ * b) Permission is hereby granted, free of charge, to any person
|
|
+ * obtaining a copy of this software and associated documentation
|
|
+ * files (the "Software"), to deal in the Software without
|
|
+ * restriction, including without limitation the rights to use
|
|
+ * copy, modify, merge, publish, distribute, sublicense, and/or
|
|
+ * sell copies of the Software, and to permit persons to whom the
|
|
+ * Software is furnished to do so, subject to the following
|
|
+ * conditions:
|
|
+ *
|
|
+ * The above copyright notice and this permission notice shall be
|
|
+ * included in all copies or substantial portions of the Software.
|
|
+ *
|
|
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
|
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
|
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
+ * OTHER DEALINGS IN THE SOFTWARE.
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "orion5x-linkstation.dtsi"
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
+/ {
|
|
+ model = "Buffalo/Revogear Kurobox Pro";
|
|
+ compatible = "buffalo,kurobox-pro", "marvell,orion5x-88f5182", "marvell,orion5x";
|
|
+
|
|
+ soc {
|
|
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
|
|
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
|
|
+ <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>,
|
|
+ <MBUS_ID(0x01, 0x1e) 0 0xfc000000 0x1000000>;
|
|
+ };
|
|
+
|
|
+ memory { /* 128 MB */
|
|
+ device_type = "memory";
|
|
+ reg = <0x00000000 0x8000000>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&pinctrl {
|
|
+ pmx_power_hdd: pmx-power-hdd {
|
|
+ marvell,pins = "mpp1";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+
|
|
+ pmx_power_usb: pmx-power-usb {
|
|
+ marvell,pins = "mpp9";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+};
|
|
+
|
|
+&devbus_cs0 {
|
|
+ status = "okay";
|
|
+ compatible = "marvell,orion-nand";
|
|
+ reg = <MBUS_ID(0x01, 0x1e) 0 0x400>;
|
|
+ cle = <0>;
|
|
+ ale = <1>;
|
|
+ bank-width = <1>;
|
|
+
|
|
+ partitions {
|
|
+ compatible = "fixed-partitions";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ uImage@0 { /* 4 MB */
|
|
+ reg = <0 0x400000>;
|
|
+ read-only;
|
|
+ };
|
|
+
|
|
+ rootfs@400000 { /* 64 MB */
|
|
+ reg = <0x400000 0x4000000>;
|
|
+ read-only;
|
|
+ };
|
|
+
|
|
+ extra@4400000 { /* 188 MB */
|
|
+ reg = <0x4400000 0xBC00000>;
|
|
+ read-only;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&hdd_power {
|
|
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
|
|
+};
|
|
+
|
|
+&usb_power {
|
|
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
|
|
+};
|
|
+
|
|
+&sata {
|
|
+ nr-ports = <2>;
|
|
+};
|
|
+
|
|
+&ehci1 {
|
|
+ status = "okay";
|
|
+};
|