Abstracted Libraries folder so it can be moved

Makefile

@@ -1,11 +1,12 @@
 # put your *.o targets here, make should handle the rest!
-
 SRCS = main.c system_stm32f0xx.c
 
 # all the files will be generated with this name (main.elf, main.bin, main.hex, etc)
-
 PROJ_NAME=main
 
+# Location of the Libraries folder from the STM32F0xx Standard Peripheral Library
+STD_PERIPH_LIB=Libraries
+
 # location of OpenOCD Board .cfg files (only used with 'make program')
 OPENOCD_BOARD_DIR=/usr/share/openocd/scripts/board
 
@@ -22,12 +23,12 @@ CFLAGS += -mlittle-endian -mthumb -mcpu=cortex-m0 -march=armv6s-m
 ###################################################
 
 vpath %.c src
-vpath %.a Libraries
+vpath %.a $(STD_PERIPH_LIB)
 
 ROOT=$(shell pwd)
 
-CFLAGS += -Iinc -ILibraries -ILibraries/CMSIS/Device/ST/STM32F0xx/Include
-CFLAGS += -ILibraries/CMSIS/Include -ILibraries/STM32F0xx_StdPeriph_Driver/inc
+CFLAGS += -Iinc -I$(STD_PERIPH_LIB) -I$(STD_PERIPH_LIB)/CMSIS/Device/ST/STM32F0xx/Include
+CFLAGS += -I$(STD_PERIPH_LIB)/CMSIS/Include -I$(STD_PERIPH_LIB)/STM32F0xx_StdPeriph_Driver/inc
 
 SRCS += Device/startup_stm32f0xx.s # add startup file to build
 
@@ -40,12 +41,12 @@ OBJS = $(SRCS:.c=.o)
 all: lib proj
 
 lib:
-	$(MAKE) -C Libraries
+	$(MAKE) -C $(STD_PERIPH_LIB)
 
 proj: 	$(PROJ_NAME).elf
 
 $(PROJ_NAME).elf: $(SRCS)
-	$(CC) $(CFLAGS) $^ -o $@ -LLibraries -lstm32f0
+	$(CC) $(CFLAGS) $^ -o $@ -L$(STD_PERIPH_LIB) -lstm32f0
 	$(OBJCOPY) -O ihex $(PROJ_NAME).elf $(PROJ_NAME).hex
 	$(OBJCOPY) -O binary $(PROJ_NAME).elf $(PROJ_NAME).bin
 	

README.md

@@ -11,6 +11,8 @@ This template will serve as a quick-start for those who do not wish to use an ID
    * **stm32f0xx_conf.h** is used to configure the peripheral library. It must be copied here if the library is upgraded. The file was file taken from the STM32F0-Discovery firmware package. It is found in the following directory:
       * Project/Demonstration/
 
+   * **Abstracting the libraries:** You may place this folder anywhere you like in order to use it for multiple projects. Just change the path of the STD_PERIPH_LIB variable in the Makefile
+
 2. Device/
    * Folder contains device specific files:
    * **stm32_flash.ld** is the linker script taken from the STM32F0-Discovery firmware package. It is found in the following directory: