Swapped system_stm32f0xx.c for the one that come with the Discovery firmware

This commit is contained in:
Mike Szczys 2012-06-28 23:14:15 -05:00
parent ba31e7b886
commit 55b8810f03
1 changed files with 60 additions and 29 deletions

View File

@ -6,14 +6,24 @@
* @date 23-March-2012
* @brief CMSIS Cortex-M0 Device Peripheral Access Layer System Source File.
* This file contains the system clock configuration for STM32F0xx devices,
* and is generated by the clock configuration tool
* STM32F0xx_Clock_Configuration_V1.0.0.xls
* and is customized for use with STM32F0-DISCOVERY Kit.
* The STM32F0xx is configured to run at 48 MHz, following the three
* configuration below:
* - PLL_SOURCE_HSI (default): HSI (~8MHz) used to clock the PLL, and
* the PLL is used as system clock source.
* - PLL_SOURCE_HSE : HSE (8MHz) used to clock the PLL, and
* the PLL is used as system clock source.
* - PLL_SOURCE_HSE_BYPASS : HSE bypassed with an external clock
* (8MHz, coming from ST-Link) used to clock
* the PLL, and the PLL is used as system
* clock source.
*
*
* 1. This file provides two functions and one global variable to be called from
* user application:
* - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
* and Divider factors, AHB/APBx prescalers and Flash settings),
* depending on the configuration made in the clock xls tool.
* depending on the configuration selected (see above).
* This function is called at startup just after reset and
* before branch to main program. This call is made inside
* the "startup_stm32f0xx.s" file.
@ -39,31 +49,6 @@
* through PLL, and you are using different crystal you have to adapt the HSE
* value to your own configuration.
*
* 5. This file configures the system clock as follows:
*=============================================================================
* System Clock Configuration
*=============================================================================
* System Clock source | PLL(HSE)
*-----------------------------------------------------------------------------
* SYSCLK | 48000000 Hz
*-----------------------------------------------------------------------------
* HCLK | 48000000 Hz
*-----------------------------------------------------------------------------
* AHB Prescaler | 1
*-----------------------------------------------------------------------------
* APB1 Prescaler | 1
*-----------------------------------------------------------------------------
* APB2 Prescaler | 1
*-----------------------------------------------------------------------------
* HSE Frequency | 8000000 Hz
*-----------------------------------------------------------------------------
* PLL MUL | 6
*-----------------------------------------------------------------------------
* VDD | 3.3 V
*-----------------------------------------------------------------------------
* Flash Latency | 1 WS
*-----------------------------------------------------------------------------
*=============================================================================
******************************************************************************
* @attention
*
@ -113,6 +98,13 @@
/** @addtogroup STM32F0xx_System_Private_Defines
* @{
*/
/* Select the PLL clock source */
#define PLL_SOURCE_HSI // HSI (~8MHz) used to clock the PLL, and the PLL is used as system clock source
//#define PLL_SOURCE_HSE // HSE (8MHz) used to clock the PLL, and the PLL is used as system clock source
//#define PLL_SOURCE_HSE_BYPASS // HSE bypassed with an external clock (8MHz, coming from ST-Link) used to clock
// the PLL, and the PLL is used as system clock source
/**
* @}
*/
@ -281,9 +273,47 @@ static void SetSysClock(void)
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK configuration ----------------------------------------*/
#if defined (PLL_SOURCE_HSI)
/* At this stage the HSI is already enabled */
/* Enable Prefetch Buffer and set Flash Latency */
FLASH->ACR = FLASH_ACR_PRFTBE | FLASH_ACR_LATENCY;
/* HCLK = SYSCLK */
RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
/* PCLK = HCLK */
RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE_DIV1;
/* PLL configuration = (HSI/2) * 12 = ~48 MHz */
RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSI_Div2 | RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLMULL12);
/* Enable PLL */
RCC->CR |= RCC_CR_PLLON;
/* Wait till PLL is ready */
while((RCC->CR & RCC_CR_PLLRDY) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)RCC_CFGR_SWS_PLL)
{
}
#else
#if defined (PLL_SOURCE_HSE)
/* Enable HSE */
RCC->CR |= ((uint32_t)RCC_CR_HSEON);
#elif defined (PLL_SOURCE_HSE_BYPASS)
/* HSE oscillator bypassed with external clock */
RCC->CR |= (uint32_t)(RCC_CR_HSEON | RCC_CR_HSEBYP);
#endif /* PLL_SOURCE_HSE */
/* Wait till HSE is ready and if Time out is reached exit */
do
{
@ -336,6 +366,7 @@ static void SetSysClock(void)
{ /* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
#endif /* PLL_SOURCE_HSI */
}
/**