304 lines
9.8 KiB
C
Executable File
304 lines
9.8 KiB
C
Executable File
/**
|
|
******************************************************************************
|
|
* @file stm32f0xx_wwdg.c
|
|
* @author MCD Application Team
|
|
* @version V1.0.0
|
|
* @date 23-March-2012
|
|
* @brief This file provides firmware functions to manage the following
|
|
* functionalities of the Window watchdog (WWDG) peripheral:
|
|
* + Prescaler, Refresh window and Counter configuration
|
|
* + WWDG activation
|
|
* + Interrupts and flags management
|
|
*
|
|
* @verbatim
|
|
*
|
|
==============================================================================
|
|
##### WWDG features #####
|
|
==============================================================================
|
|
[..] Once enabled the WWDG generates a system reset on expiry of a programmed
|
|
time period, unless the program refreshes the counter (downcounter)
|
|
before to reach 0x3F value (i.e. a reset is generated when the counter
|
|
value rolls over from 0x40 to 0x3F).
|
|
[..] An MCU reset is also generated if the counter value is refreshed
|
|
before the counter has reached the refresh window value. This
|
|
implies that the counter must be refreshed in a limited window.
|
|
|
|
[..] Once enabled the WWDG cannot be disabled except by a system reset.
|
|
|
|
[..] WWDGRST flag in RCC_CSR register can be used to inform when a WWDG
|
|
reset occurs.
|
|
|
|
[..] The WWDG counter input clock is derived from the APB clock divided
|
|
by a programmable prescaler.
|
|
|
|
[..] WWDG counter clock = PCLK1 / Prescaler.
|
|
[..] WWDG timeout = (WWDG counter clock) * (counter value).
|
|
|
|
[..] Min-max timeout value @32MHz (PCLK1): ~85us / ~43ms.
|
|
|
|
##### How to use this driver #####
|
|
==============================================================================
|
|
[..]
|
|
(#) Enable WWDG clock using RCC_APB1PeriphClockCmd(RCC_APB1Periph_WWDG, ENABLE)
|
|
function.
|
|
|
|
(#) Configure the WWDG prescaler using WWDG_SetPrescaler() function.
|
|
|
|
(#) Configure the WWDG refresh window using WWDG_SetWindowValue() function.
|
|
|
|
(#) Set the WWDG counter value and start it using WWDG_Enable() function.
|
|
When the WWDG is enabled the counter value should be configured to
|
|
a value greater than 0x40 to prevent generating an immediate reset.
|
|
|
|
(#) Optionally you can enable the Early wakeup interrupt which is
|
|
generated when the counter reach 0x40.
|
|
Once enabled this interrupt cannot be disabled except by a system reset.
|
|
|
|
(#) Then the application program must refresh the WWDG counter at regular
|
|
intervals during normal operation to prevent an MCU reset, using
|
|
WWDG_SetCounter() function. This operation must occur only when
|
|
the counter value is lower than the refresh window value,
|
|
programmed using WWDG_SetWindowValue().
|
|
|
|
* @endverbatim
|
|
*
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
|
*
|
|
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
|
* You may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at:
|
|
*
|
|
* http://www.st.com/software_license_agreement_liberty_v2
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f0xx_wwdg.h"
|
|
#include "stm32f0xx_rcc.h"
|
|
|
|
/** @addtogroup STM32F0xx_StdPeriph_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup WWDG
|
|
* @brief WWDG driver modules
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* --------------------- WWDG registers bit mask ---------------------------- */
|
|
/* CFR register bit mask */
|
|
#define CFR_WDGTB_MASK ((uint32_t)0xFFFFFE7F)
|
|
#define CFR_W_MASK ((uint32_t)0xFFFFFF80)
|
|
#define BIT_MASK ((uint8_t)0x7F)
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/** @defgroup WWDG_Private_Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup WWDG_Group1 Prescaler, Refresh window and Counter configuration functions
|
|
* @brief Prescaler, Refresh window and Counter configuration functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Prescaler, Refresh window and Counter configuration functions #####
|
|
==============================================================================
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Deinitializes the WWDG peripheral registers to their default reset values.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void WWDG_DeInit(void)
|
|
{
|
|
RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE);
|
|
RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE);
|
|
}
|
|
|
|
/**
|
|
* @brief Sets the WWDG Prescaler.
|
|
* @param WWDG_Prescaler: specifies the WWDG Prescaler.
|
|
* This parameter can be one of the following values:
|
|
* @arg WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1
|
|
* @arg WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2
|
|
* @arg WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4
|
|
* @arg WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8
|
|
* @retval None
|
|
*/
|
|
void WWDG_SetPrescaler(uint32_t WWDG_Prescaler)
|
|
{
|
|
uint32_t tmpreg = 0;
|
|
/* Check the parameters */
|
|
assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler));
|
|
/* Clear WDGTB[1:0] bits */
|
|
tmpreg = WWDG->CFR & CFR_WDGTB_MASK;
|
|
/* Set WDGTB[1:0] bits according to WWDG_Prescaler value */
|
|
tmpreg |= WWDG_Prescaler;
|
|
/* Store the new value */
|
|
WWDG->CFR = tmpreg;
|
|
}
|
|
|
|
/**
|
|
* @brief Sets the WWDG window value.
|
|
* @param WindowValue: specifies the window value to be compared to the downcounter.
|
|
* This parameter value must be lower than 0x80.
|
|
* @retval None
|
|
*/
|
|
void WWDG_SetWindowValue(uint8_t WindowValue)
|
|
{
|
|
__IO uint32_t tmpreg = 0;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_WWDG_WINDOW_VALUE(WindowValue));
|
|
/* Clear W[6:0] bits */
|
|
|
|
tmpreg = WWDG->CFR & CFR_W_MASK;
|
|
|
|
/* Set W[6:0] bits according to WindowValue value */
|
|
tmpreg |= WindowValue & (uint32_t) BIT_MASK;
|
|
|
|
/* Store the new value */
|
|
WWDG->CFR = tmpreg;
|
|
}
|
|
|
|
/**
|
|
* @brief Enables the WWDG Early Wakeup interrupt(EWI).
|
|
* @note Once enabled this interrupt cannot be disabled except by a system reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void WWDG_EnableIT(void)
|
|
{
|
|
WWDG->CFR |= WWDG_CFR_EWI;
|
|
}
|
|
|
|
/**
|
|
* @brief Sets the WWDG counter value.
|
|
* @param Counter: specifies the watchdog counter value.
|
|
* This parameter must be a number between 0x40 and 0x7F (to prevent generating
|
|
* an immediate reset).
|
|
* @retval None
|
|
*/
|
|
void WWDG_SetCounter(uint8_t Counter)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_WWDG_COUNTER(Counter));
|
|
/* Write to T[6:0] bits to configure the counter value, no need to do
|
|
a read-modify-write; writing a 0 to WDGA bit does nothing */
|
|
WWDG->CR = Counter & BIT_MASK;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup WWDG_Group2 WWDG activation functions
|
|
* @brief WWDG activation functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### WWDG activation function #####
|
|
==============================================================================
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enables WWDG and load the counter value.
|
|
* @param Counter: specifies the watchdog counter value.
|
|
* This parameter must be a number between 0x40 and 0x7F (to prevent generating
|
|
* an immediate reset).
|
|
* @retval None
|
|
*/
|
|
void WWDG_Enable(uint8_t Counter)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_WWDG_COUNTER(Counter));
|
|
WWDG->CR = WWDG_CR_WDGA | Counter;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup WWDG_Group3 Interrupts and flags management functions
|
|
* @brief Interrupts and flags management functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Interrupts and flags management functions #####
|
|
==============================================================================
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Checks whether the Early Wakeup interrupt flag is set or not.
|
|
* @param None
|
|
* @retval The new state of the Early Wakeup interrupt flag (SET or RESET).
|
|
*/
|
|
FlagStatus WWDG_GetFlagStatus(void)
|
|
{
|
|
FlagStatus bitstatus = RESET;
|
|
|
|
if ((WWDG->SR) != (uint32_t)RESET)
|
|
{
|
|
bitstatus = SET;
|
|
}
|
|
else
|
|
{
|
|
bitstatus = RESET;
|
|
}
|
|
return bitstatus;
|
|
}
|
|
|
|
/**
|
|
* @brief Clears Early Wakeup interrupt flag.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void WWDG_ClearFlag(void)
|
|
{
|
|
WWDG->SR = (uint32_t)RESET;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|