barebox/include/configs/FADS860T.h

/*
  * A collection of structures, addresses, and values associated with
  * the Motorola 860T FADS board.  Copied from the MBX stuff.
  * Magnus Damm added defines for 8xxrom and extended bd_info.
  * Helmut Buchsbaum added bitvalues for BCSRx
  *
  * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
  *
  * Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com
  *
  * Values common to all FADS family boards are in board/fads/fads.h
  */

#ifndef __CONFIG_H
#define __CONFIG_H

/* board type */
#define CONFIG_FADS		1       /* old/new FADS + new ADS */

/* processor type */
#define CONFIG_MPC860T		1       /* 860T */

#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
#undef	CONFIG_8xx_CONS_SMC2
#undef	CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE		38400
#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/

#if 0 /* old FADS */
# define CFG_8XX_FACT		12	/* 4 MHz oscillator on EXTCLK */
#else /* new FADS */
# define CFG_8XX_FACT		10	/* 5 MHz oscillator on EXTCLK */
#endif

#define CFG_PLPRCR  (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
		PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)

#define CONFIG_DRAM_50MHZ		1
#define CONFIG_SDRAM_50MHZ              1

#include "fads.h"

#ifdef USE_REAL_FLASH_VALUES
/*
 * These values fit our FADS860T ...
 * The "default" behaviour with 1Mbyte initial doesn't work for us!
 */
#undef CFG_OR0_PRELIM
#undef CFG_BR0_PRELIM
#define CFG_OR0_PRELIM	0x0FFC00D34 /* Real values for the board */
#define CFG_BR0_PRELIM	0x02800001  /* Real values for the board */
#endif

#define CFG_DAUGHTERBOARD /* FADS has processor-specific daughterboard */

#endif	/* __CONFIG_H */
Initial revision 2002-10-11 15:28:05 +00:00			`/*`
			`* A collection of structures, addresses, and values associated with`
			`* the Motorola 860T FADS board. Copied from the MBX stuff.`
			`* Magnus Damm added defines for 8xxrom and extended bd_info.`
			`* Helmut Buchsbaum added bitvalues for BCSRx`
			`*`
			`* Copyright (c) 1998 Dan Malek (dmalek@jlc.net)`
* Fix problems caused by Robert Schwebel's cramfs patch * Patch by Scott McNutt, 02 Jan 2004: Add support for the Nios Active Serial Memory Interface (ASMI) on Cyclone devices * Patch by Andrea Marson, 16 Dec 2003: Add support for the PPChameleon ME and HI modules * Patch by Yuli Barcohen, 22 Dec 2003: Add support for Motorola DUET ADS board (MPC87x/88x) 2004-01-04 16:28:35 +00:00			`*`
			`* Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com`
			`*`
			`* Values common to all FADS family boards are in board/fads/fads.h`
Initial revision 2002-10-11 15:28:05 +00:00			`*/`

			`#ifndef __CONFIG_H`
			`#define __CONFIG_H`

* Patch by Martin Krause, 17 Jul 2003: add delay to get I2C working with "imm" command and s3c24x0_i2c.c * Patch by Richard Woodruff, 17 July 03: - Fixed bug in OMAP1510 baud rate divisor settings. * Patch by Nye Liu, 16 July 2003: MPC860FADS fixes: - add MPC86xADS support (uses MPC86xADS.h) - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T) o PLPRCR changes o BRG changes (EXTAL/XTAL restricted to 10MHz) o don't trust gclk() software measurement by default, depend on CONFIG_8xx_GCLK_FREQ - add DRAM SIMM not installed detection - use more "correct" SDRAM initialization sequence - allow different SDRAM sizes (8xxADS has 8M) - default DER is 0 - remove unused MAMR defines from FADS860T.h (all done in fads.c) - rename MAMR/MBMR defines to be more consistent. Should eventually be merged into MxMR to better reflect the PowerQUICC datasheet. * Patch by Yuli Barcohen, 16 Jul 2003: support new Motorola PQ2FADS-ZU evaluation board which replaced MPC8260ADS and MPC8266ADS 2003-07-17 23:16:40 +00:00			`/* board type */`
			`#define CONFIG_FADS 1 /* old/new FADS + new ADS */`

			`/* processor type */`
			`#define CONFIG_MPC860T 1 /* 860T */`
Initial revision 2002-10-11 15:28:05 +00:00
			`#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */`
			`#undef CONFIG_8xx_CONS_SMC2`
			`#undef CONFIG_8xx_CONS_NONE`
* Patch by Martin Krause, 17 Jul 2003: add delay to get I2C working with "imm" command and s3c24x0_i2c.c * Patch by Richard Woodruff, 17 July 03: - Fixed bug in OMAP1510 baud rate divisor settings. * Patch by Nye Liu, 16 July 2003: MPC860FADS fixes: - add MPC86xADS support (uses MPC86xADS.h) - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T) o PLPRCR changes o BRG changes (EXTAL/XTAL restricted to 10MHz) o don't trust gclk() software measurement by default, depend on CONFIG_8xx_GCLK_FREQ - add DRAM SIMM not installed detection - use more "correct" SDRAM initialization sequence - allow different SDRAM sizes (8xxADS has 8M) - default DER is 0 - remove unused MAMR defines from FADS860T.h (all done in fads.c) - rename MAMR/MBMR defines to be more consistent. Should eventually be merged into MxMR to better reflect the PowerQUICC datasheet. * Patch by Yuli Barcohen, 16 Jul 2003: support new Motorola PQ2FADS-ZU evaluation board which replaced MPC8260ADS and MPC8266ADS 2003-07-17 23:16:40 +00:00			`#define CONFIG_BAUDRATE 38400`
Initial revision 2002-10-11 15:28:05 +00:00			`#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */`

* Patch by Martin Krause, 17 Jul 2003: add delay to get I2C working with "imm" command and s3c24x0_i2c.c * Patch by Richard Woodruff, 17 July 03: - Fixed bug in OMAP1510 baud rate divisor settings. * Patch by Nye Liu, 16 July 2003: MPC860FADS fixes: - add MPC86xADS support (uses MPC86xADS.h) - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T) o PLPRCR changes o BRG changes (EXTAL/XTAL restricted to 10MHz) o don't trust gclk() software measurement by default, depend on CONFIG_8xx_GCLK_FREQ - add DRAM SIMM not installed detection - use more "correct" SDRAM initialization sequence - allow different SDRAM sizes (8xxADS has 8M) - default DER is 0 - remove unused MAMR defines from FADS860T.h (all done in fads.c) - rename MAMR/MBMR defines to be more consistent. Should eventually be merged into MxMR to better reflect the PowerQUICC datasheet. * Patch by Yuli Barcohen, 16 Jul 2003: support new Motorola PQ2FADS-ZU evaluation board which replaced MPC8260ADS and MPC8266ADS 2003-07-17 23:16:40 +00:00			`#if 0 /* old FADS */`
Patch by Yuli Barcohen, 19 Apr 2004: - Rename DUET_ADS to MPC885ADS - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY - Clean up FADS family port to use the new defines 2004-06-06 21:35:06 +00:00			`# define CFG_8XX_FACT 12 /* 4 MHz oscillator on EXTCLK */`
* Patch by Martin Krause, 17 Jul 2003: add delay to get I2C working with "imm" command and s3c24x0_i2c.c * Patch by Richard Woodruff, 17 July 03: - Fixed bug in OMAP1510 baud rate divisor settings. * Patch by Nye Liu, 16 July 2003: MPC860FADS fixes: - add MPC86xADS support (uses MPC86xADS.h) - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T) o PLPRCR changes o BRG changes (EXTAL/XTAL restricted to 10MHz) o don't trust gclk() software measurement by default, depend on CONFIG_8xx_GCLK_FREQ - add DRAM SIMM not installed detection - use more "correct" SDRAM initialization sequence - allow different SDRAM sizes (8xxADS has 8M) - default DER is 0 - remove unused MAMR defines from FADS860T.h (all done in fads.c) - rename MAMR/MBMR defines to be more consistent. Should eventually be merged into MxMR to better reflect the PowerQUICC datasheet. * Patch by Yuli Barcohen, 16 Jul 2003: support new Motorola PQ2FADS-ZU evaluation board which replaced MPC8260ADS and MPC8266ADS 2003-07-17 23:16:40 +00:00			`#else /* new FADS */`
Patch by Yuli Barcohen, 19 Apr 2004: - Rename DUET_ADS to MPC885ADS - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY - Clean up FADS family port to use the new defines 2004-06-06 21:35:06 +00:00			`# define CFG_8XX_FACT 10 /* 5 MHz oscillator on EXTCLK */`
Initial revision 2002-10-11 15:28:05 +00:00			`#endif`

Patch by Yuli Barcohen, 19 Apr 2004: - Rename DUET_ADS to MPC885ADS - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY - Clean up FADS family port to use the new defines 2004-06-06 21:35:06 +00:00			`#define CFG_PLPRCR (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) \| \`
			`PLPRCR_SPLSS \| PLPRCR_TEXPS \| PLPRCR_TMIST)`

* Fix problems caused by Robert Schwebel's cramfs patch * Patch by Scott McNutt, 02 Jan 2004: Add support for the Nios Active Serial Memory Interface (ASMI) on Cyclone devices * Patch by Andrea Marson, 16 Dec 2003: Add support for the PPChameleon ME and HI modules * Patch by Yuli Barcohen, 22 Dec 2003: Add support for Motorola DUET ADS board (MPC87x/88x) 2004-01-04 16:28:35 +00:00			`#define CONFIG_DRAM_50MHZ 1`
			`#define CONFIG_SDRAM_50MHZ 1`
Initial revision 2002-10-11 15:28:05 +00:00
* Fix problems caused by Robert Schwebel's cramfs patch * Patch by Scott McNutt, 02 Jan 2004: Add support for the Nios Active Serial Memory Interface (ASMI) on Cyclone devices * Patch by Andrea Marson, 16 Dec 2003: Add support for the PPChameleon ME and HI modules * Patch by Yuli Barcohen, 22 Dec 2003: Add support for Motorola DUET ADS board (MPC87x/88x) 2004-01-04 16:28:35 +00:00			`#include "fads.h"`
Initial revision 2002-10-11 15:28:05 +00:00
			`#ifdef USE_REAL_FLASH_VALUES`
			`/*`
			`* These values fit our FADS860T ...`
			`* The "default" behaviour with 1Mbyte initial doesn't work for us!`
			`*/`
* Fix problems caused by Robert Schwebel's cramfs patch * Patch by Scott McNutt, 02 Jan 2004: Add support for the Nios Active Serial Memory Interface (ASMI) on Cyclone devices * Patch by Andrea Marson, 16 Dec 2003: Add support for the PPChameleon ME and HI modules * Patch by Yuli Barcohen, 22 Dec 2003: Add support for Motorola DUET ADS board (MPC87x/88x) 2004-01-04 16:28:35 +00:00			`#undef CFG_OR0_PRELIM`
			`#undef CFG_BR0_PRELIM`
Initial revision 2002-10-11 15:28:05 +00:00			`#define CFG_OR0_PRELIM 0x0FFC00D34 /* Real values for the board */`
			`#define CFG_BR0_PRELIM 0x02800001 /* Real values for the board */`
			`#endif`

Patch by Yuli Barcohen, 19 Apr 2004: - Rename DUET_ADS to MPC885ADS - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY - Clean up FADS family port to use the new defines 2004-06-06 21:35:06 +00:00			`#define CFG_DAUGHTERBOARD /* FADS has processor-specific daughterboard */`
Initial revision 2002-10-11 15:28:05 +00:00
			`#endif /* __CONFIG_H */`