2009-06-23 14:31:25 +00:00
|
|
|
|
/*
|
|
|
|
|
* Copyright (C) 2009 Juergen Beisert, Pengutronix
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
|
* published by the Free Software Foundation; either version 2 of
|
|
|
|
|
* the License, or (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
|
|
|
* MA 02111-1307 USA
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* @file
|
|
|
|
|
* @brief a9m2410 Specific Board Initialization routines
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <common.h>
|
|
|
|
|
#include <driver.h>
|
|
|
|
|
#include <init.h>
|
|
|
|
|
#include <asm/armlinux.h>
|
|
|
|
|
#include <asm/mach-types.h>
|
|
|
|
|
#include <partition.h>
|
|
|
|
|
#include <nand.h>
|
|
|
|
|
#include <asm/io.h>
|
|
|
|
|
#include <asm/arch/s3c24x0-iomap.h>
|
|
|
|
|
#include <asm/arch/s3c24x0-nand.h>
|
|
|
|
|
|
|
|
|
|
static struct device_d sdram_dev = {
|
|
|
|
|
.name = "ram",
|
|
|
|
|
.map_base = CS6_BASE,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
// {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
|
|
|
|
|
static struct s3c24x0_nand_platform_data nand_info = {
|
|
|
|
|
.nand_timing = CALC_NFCONF_TIMING(A9M2410_TACLS, A9M2410_TWRPH0, A9M2410_TWRPH1)
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static struct device_d nand_dev = {
|
|
|
|
|
.name = "s3c24x0_nand",
|
|
|
|
|
.map_base = S3C24X0_NAND_BASE,
|
|
|
|
|
.platform_data = &nand_info,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* SMSC 91C111 network controller on the baseboard
|
|
|
|
|
* connected to CS line 1 and interrupt line
|
|
|
|
|
* GPIO3, data width is 32 bit
|
|
|
|
|
*/
|
|
|
|
|
static struct device_d network_dev = {
|
|
|
|
|
.name = "smc91c111",
|
|
|
|
|
.map_base = CS1_BASE + 0x300,
|
|
|
|
|
.size = 16,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#if 0
|
|
|
|
|
/*
|
|
|
|
|
* dual 16550 based UART on the baseboard
|
|
|
|
|
* connected to CS line 2 and interrupt line
|
|
|
|
|
* GPIOX (EINT2 and EINT3), data width is 8 bit
|
|
|
|
|
*/
|
|
|
|
|
static struct device_d ext_serial_dev[] = {
|
|
|
|
|
{
|
|
|
|
|
.name = "16550",
|
|
|
|
|
.id = "serial",
|
|
|
|
|
.map_base = CS2_BASE + 0x02000000, /* A25 = 1 */
|
|
|
|
|
.size = 7,
|
|
|
|
|
.type = DEVICE_TYPE_CONSOLE,
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.name = "16550",
|
|
|
|
|
.id = "serial",
|
|
|
|
|
.map_base = CS2_BASE + 0x04000000, /* A26 = 1 */
|
|
|
|
|
.size = 16,
|
|
|
|
|
.type = DEVICE_TYPE_CONSOLE,
|
|
|
|
|
}
|
|
|
|
|
};
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
static int a9m2410_devices_init(void)
|
|
|
|
|
{
|
|
|
|
|
uint32_t reg;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* detect the current memory size
|
|
|
|
|
* Note: On this card the second SDRAM page is not used
|
|
|
|
|
*/
|
|
|
|
|
reg = readl(BANKSIZE);
|
|
|
|
|
|
|
|
|
|
switch (reg &= 0x7) {
|
|
|
|
|
case 0:
|
|
|
|
|
sdram_dev.size = 32 * 1024 * 1024;
|
|
|
|
|
break;
|
|
|
|
|
case 1:
|
|
|
|
|
sdram_dev.size = 64 * 1024 * 1024;
|
|
|
|
|
break;
|
|
|
|
|
case 2:
|
|
|
|
|
sdram_dev.size = 128 * 1024 * 1024;
|
|
|
|
|
break;
|
|
|
|
|
case 4:
|
|
|
|
|
sdram_dev.size = 2 * 1024 * 1024;
|
|
|
|
|
break;
|
|
|
|
|
case 5:
|
|
|
|
|
sdram_dev.size = 4 * 1024 * 1024;
|
|
|
|
|
break;
|
|
|
|
|
case 6:
|
|
|
|
|
sdram_dev.size = 8 * 1024 * 1024;
|
|
|
|
|
break;
|
|
|
|
|
case 7:
|
|
|
|
|
sdram_dev.size = 16 * 1024 * 1024;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* ---------- configure the GPIOs ------------- */
|
|
|
|
|
writel(0x007FFFFF, GPACON);
|
|
|
|
|
writel(0x00000000, GPCCON);
|
|
|
|
|
writel(0x00000000, GPCUP);
|
|
|
|
|
writel(0x00000000, GPDCON);
|
|
|
|
|
writel(0x00000000, GPDUP);
|
|
|
|
|
writel(0xAAAAAAAA, GPECON);
|
|
|
|
|
writel(0x0000E03F, GPEUP);
|
|
|
|
|
writel(0x00000000, GPBCON); /* all inputs */
|
|
|
|
|
writel(0x00000007, GPBUP); /* pullup disabled for GPB0..3 */
|
|
|
|
|
writel(0x00009000, GPFCON); /* GPF7 CLK_INT#, GPF6 Debug-LED */
|
|
|
|
|
writel(0x000000FF, GPFUP);
|
|
|
|
|
writel(readl(GPGDAT) | 0x0010, GPGDAT); /* switch off LCD backlight */
|
|
|
|
|
writel(0xFF00A938, GPGCON); /* switch off USB device */
|
|
|
|
|
writel(0x0000F000, GPGUP);
|
|
|
|
|
writel(readl(GPHDAT) | 0x100, GPHDAT); /* switch BOOTINT/GPIO_ON# to high */
|
|
|
|
|
writel(0x000007FF, GPHUP);
|
|
|
|
|
writel(0x0029FAAA, GPHCON);
|
|
|
|
|
/*
|
|
|
|
|
* USB port1 normal, USB port0 normal, USB1 pads for device
|
|
|
|
|
* PCLK output on CLKOUT0, UPLL CLK output on CLKOUT1,
|
|
|
|
|
* 2nd SDRAM bank off (only bank 1 is used)
|
|
|
|
|
*/
|
|
|
|
|
writel(0x40140, MISCCR);
|
|
|
|
|
|
|
|
|
|
/* ----------- configure the access to the outer space ---------- */
|
|
|
|
|
reg = readl(BWSCON);
|
|
|
|
|
|
|
|
|
|
/* CS#1 to access the network controller */
|
|
|
|
|
reg &= ~0xf0;
|
|
|
|
|
reg |= 0xe0;
|
|
|
|
|
writel(0x1350, BANKCON1);
|
|
|
|
|
|
|
|
|
|
/* CS#2 to the dual 16550 UART */
|
|
|
|
|
reg &= ~0xf00;
|
|
|
|
|
reg |= 0x400;
|
|
|
|
|
writel(0x0d50, BANKCON2);
|
|
|
|
|
|
|
|
|
|
writel(reg, BWSCON);
|
|
|
|
|
|
|
|
|
|
/* release the reset signal to the network and UART device */
|
|
|
|
|
reg = readl(MISCCR);
|
|
|
|
|
reg |= 0x10000;
|
|
|
|
|
writel(reg, MISCCR);
|
|
|
|
|
|
|
|
|
|
/* ----------- the devices the boot loader should work with -------- */
|
|
|
|
|
register_device(&nand_dev);
|
|
|
|
|
register_device(&sdram_dev);
|
|
|
|
|
register_device(&network_dev);
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_NAND
|
|
|
|
|
/* ----------- add some vital partitions -------- */
|
2009-07-21 14:55:49 +00:00
|
|
|
|
devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED, "self_raw");
|
|
|
|
|
dev_add_bb_dev("self_raw", "self0");
|
|
|
|
|
|
|
|
|
|
devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED, "env_raw");
|
|
|
|
|
dev_add_bb_dev("env_raw", "env0");
|
2009-06-23 14:31:25 +00:00
|
|
|
|
#endif
|
|
|
|
|
armlinux_set_bootparams((void *)sdram_dev.map_base + 0x100);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Kernel uses:
|
|
|
|
|
* 2.6.29: SMDK2410 = 193
|
|
|
|
|
* 2.6.11: A9M2410 = 697
|
|
|
|
|
*/
|
|
|
|
|
armlinux_set_architecture(193/*697*/); /* A9M2410 */
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
device_initcall(a9m2410_devices_init);
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_S3C24XX_NAND_BOOT
|
|
|
|
|
void __bare_init nand_boot(void)
|
|
|
|
|
{
|
|
|
|
|
s3c24x0_nand_load_image((void *)TEXT_BASE, 256 * 1024, 0, 512);
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
static struct device_d a9m2410_serial_device = {
|
|
|
|
|
.name = "s3c24x0_serial",
|
|
|
|
|
.map_base = UART1_BASE,
|
|
|
|
|
.size = UART1_SIZE,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int a9m2410_console_init(void)
|
|
|
|
|
{
|
|
|
|
|
register_device(&a9m2410_serial_device);
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
console_initcall(a9m2410_console_init);
|
|
|
|
|
|
|
|
|
|
/** @page a9m2410 DIGI's a9m2410
|
|
|
|
|
|
|
|
|
|
This CPU card is based on a Samsung S3C2410 CPU. The card is shipped with:
|
|
|
|
|
|
|
|
|
|
- S3C2410\@200 MHz (ARM920T/ARMv4T)
|
|
|
|
|
- 12MHz crystal reference
|
|
|
|
|
- SDRAM 32 MiB
|
|
|
|
|
- Samsung K4M563233E-EE1H
|
|
|
|
|
- 2M x 32Bit x 4 Banks Mobile SDRAM
|
|
|
|
|
- 90 pin FBGA
|
|
|
|
|
- CL3\@133MHz, CL2\@100MHz (CAS/RAS delay 19ns)
|
|
|
|
|
- four banks
|
|
|
|
|
- 32 bit data bits
|
|
|
|
|
- row address size is 11
|
|
|
|
|
- Row cycle time: 69ns
|
|
|
|
|
- collumn address size is 9 bits
|
|
|
|
|
- Extended temperature range (-25<EFBFBD>C...85<EFBFBD>C)
|
|
|
|
|
- 64ms refresh period (4k)
|
|
|
|
|
- NAND Flash 32 MiB
|
|
|
|
|
- Samsung KM29U256T
|
|
|
|
|
- 32MiB 3,3V 8-bit
|
|
|
|
|
- ID: 0xEC, 0x75, 0x??, 0xBD
|
|
|
|
|
- 30ns/40ns/20ns
|
|
|
|
|
- I2C interface, 100KHz and 400KHz
|
|
|
|
|
- Real Time Clock
|
|
|
|
|
- Dallas DS1337
|
|
|
|
|
- address 0x68
|
|
|
|
|
- EEPROM
|
|
|
|
|
- ST M24LC64
|
|
|
|
|
- address 0x50
|
|
|
|
|
- 16bit addressing
|
|
|
|
|
- LCD interface
|
|
|
|
|
- Touch Screen interface
|
|
|
|
|
- Camera interface
|
|
|
|
|
- I2S interface
|
|
|
|
|
- AC97 Audio-CODEC interface
|
|
|
|
|
- SD card interface
|
|
|
|
|
- 3 serial RS232 interfaces
|
|
|
|
|
- Host and device USB interface, USB1.1 compliant
|
|
|
|
|
- Ethernet interface
|
|
|
|
|
- 10Mbps, Cirrus Logic, CS8900A (on the CPU card) or
|
|
|
|
|
- 10/100Mbps, SMSC 91C111 (on the baseboard)
|
|
|
|
|
- SPI interface
|
|
|
|
|
- JTAG interface
|
|
|
|
|
|
|
|
|
|
*/
|