9
0
Fork 0

watchdog: i.MX: Fix internal/external reset

The watchdog can either reset only the SoC or assert the WDOG_B
output signal instead. On some boards it's necessary to use the
external WDOG_B output to make sure that external devices like the
PMIC are also properly resetted. This has been fixed in the Linux
driver which honours a fsl,ext-reset-output device tree property
to select between both ways. Do the same in the barebox driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is contained in:
Sascha Hauer 2017-01-16 11:40:36 +01:00
parent aadb845958
commit 043bc98c4b
1 changed files with 14 additions and 2 deletions

View File

@ -36,6 +36,7 @@ struct imx_wd {
struct device_d *dev;
const struct imx_wd_ops *ops;
struct restart_handler restart;
bool ext_reset;
};
#define to_imx_wd(h) container_of(h, struct imx_wd, wd)
@ -51,6 +52,7 @@ struct imx_wd {
#define IMX21_WDOG_WSTR 0x04 /* Watchdog Status Register */
#define IMX21_WDOG_WMCR 0x08 /* Misc Register */
#define IMX21_WDOG_WCR_WDE (1 << 2)
#define IMX21_WDOG_WCR_WDT (1 << 3)
#define IMX21_WDOG_WCR_SRS (1 << 4)
#define IMX21_WDOG_WCR_WDA (1 << 5)
@ -109,6 +111,9 @@ static int imx21_watchdog_set_timeout(struct imx_wd *priv, unsigned timeout)
val = ((timeout * 2 - 1) << 8) | IMX21_WDOG_WCR_SRS |
IMX21_WDOG_WCR_WDA;
if (priv->ext_reset)
val |= IMX21_WDOG_WCR_WDT;
writew(IMX21_WDOG_WCR_WDE | val, priv->base + IMX21_WDOG_WCR);
/* Write Service Sequence */
@ -120,9 +125,13 @@ static int imx21_watchdog_set_timeout(struct imx_wd *priv, unsigned timeout)
static void imx21_soc_reset(struct imx_wd *priv)
{
u16 val;
u16 val = 0;
val = IMX21_WDOG_WCR_SRS | IMX21_WDOG_WCR_WDA;
/* Use internal reset or external - not both */
if (priv->ext_reset)
val |= IMX21_WDOG_WCR_SRS; /* do not assert int reset */
else
val |= IMX21_WDOG_WCR_WDA; /* do not assert ext-reset */
writew(val, priv->base + IMX21_WDOG_WCR);
}
@ -202,6 +211,9 @@ static int imx_wd_probe(struct device_d *dev)
priv->wd.dev = dev;
priv->dev = dev;
priv->ext_reset = of_property_read_bool(dev->device_node,
"fsl,ext-reset-output");
if (IS_ENABLED(CONFIG_WATCHDOG_IMX)) {
ret = watchdog_register(&priv->wd);
if (ret)