diff --git a/arch/arm/cpu/start-arm920t.S b/arch/arm/cpu/start-arm920t.S
index 3fd4528a8..8935f9ede 100644
--- a/arch/arm/cpu/start-arm920t.S
+++ b/arch/arm/cpu/start-arm920t.S
@@ -119,48 +119,35 @@ reset:
 	orr	r0,r0,#0xd3
 	msr	cpsr,r0
 
-/* turn off the watchdog */
-#if defined(CONFIG_S3C2400)
-# define pWTCON		0x15300000
-# define INTMSK		0x14400008	/* Interupt-Controller base addresses */
-# define CLKDIVN	0x14800014	/* clock divisor register */
-#elif defined(CONFIG_S3C2410)
-# define pWTCON		0x53000000
-# define INTMSK		0x4A000008	/* Interupt-Controller base addresses */
-# define INTSUBMSK	0x4A00001C
-# define CLKDIVN	0x4C000014	/* clock divisor register */
+#ifdef ARCH_HAS_INIT_LOWLEVEL
+	/* Samsung S3C24x0 needs some stuff here */
+	bl arch_init_lowlevel
 #endif
 
-#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
-	ldr     r0, =pWTCON
-	mov     r1, #0x0
-	str     r1, [r0]
-
 	/*
-	 * mask all IRQs by setting all bits in the INTMR - default
+	 * flush v4 I/D caches
 	 */
-	mov	r1, #0xffffffff
-	ldr	r0, =INTMSK
-	str	r1, [r0]
-# if defined(CONFIG_S3C2410)
-	ldr	r1, =0x3ff
-	ldr	r0, =INTSUBMSK
-	str	r1, [r0]
-# endif
-
-	/* FCLK:HCLK:PCLK = 1:2:4 */
-	/* default FCLK is 120 MHz ! */
-	ldr	r0, =CLKDIVN
-	mov	r1, #3
-	str	r1, [r0]
-#endif	/* CONFIG_S3C2400 || CONFIG_S3C2410 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
 
 	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
+	 * disable MMU stuff and caches
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00002300	/* clear bits 13, 9:8 (--V- --RS) */
+	bic	r0, r0, #0x00000087	/* clear bits 7, 2:0 (B--- -CAM) */
+	orr	r0, r0, #0x00000002	/* set bit 2 (A) Align */
+	orr	r0, r0, #0x00001000	/* set bit 12 (I) I-Cache */
+	mcr	p15, 0, r0, c1, c0, 0
+
+	/*
+	 * before relocating, we have to setup RAM timing
+	 * because memory timing is board-dependend, you will
+	 * find a lowlevel_init.S in your board directory.
 	 */
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
+	bl	board_init_lowlevel
 #endif
 
 #ifndef CONFIG_SKIP_RELOCATE_UBOOT
@@ -204,48 +191,6 @@ clbss_l:str	r2, [r0]		/* clear loop...                    */
 
 _start_armboot:	.word start_uboot
 
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-cpu_init_crit:
-	/*
-	 * flush v4 I/D caches
-	 */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
-	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-
-	/*
-	 * disable MMU stuff and caches
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #0x00002300	/* clear bits 13, 9:8 (--V- --RS) */
-	bic	r0, r0, #0x00000087	/* clear bits 7, 2:0 (B--- -CAM) */
-	orr	r0, r0, #0x00000002	/* set bit 2 (A) Align */
-	orr	r0, r0, #0x00001000	/* set bit 12 (I) I-Cache */
-	mcr	p15, 0, r0, c1, c0, 0
-
-	/*
-	 * before relocating, we have to setup RAM timing
-	 * because memory timing is board-dependend, you will
-	 * find a lowlevel_init.S in your board directory.
-	 */
-	mov	ip, lr
-	bl	lowlevel_init
-	mov	lr, ip
-	mov	pc, lr
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
 /*
  *************************************************************************
  *