sysmo-bts
/
barebox
9
0
Fork 0
Code Releases Activity

* Patch by llandre, 11 Sep 2003: 

update configuration for PPChameleonEVB board
This commit is contained in:
wdenk 2003-09-13 19:13:29 +00:00
parent 531716e171
commit 200f8c7a4c
2 changed files with 12 additions and 41 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
CHANGELOG
View File

@ -2,6 +2,9 @@
Changes for U-Boot 1.0.0:
======================================================================
* Patch by llandre, 11 Sep 2003:
update configuration for PPChameleonEVB board
* Patch by David Müller, 13 Sep 2003:
various changes to VCMA9 board specific files

50
include/configs/PPChameleonEVB.h
View File

@ -55,47 +55,17 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#if 0
#define CONFIG_PREBOOT \
"crc32 f0207004 ffc 0;" \
"if cmp 0 f0207000 1;" \
"then;echo Old CRC is correct;crc32 f0207004 ff4 f0207000;" \
"else;echo Old CRC is bad;fi"
#endif
#undef CONFIG_BOOTARGS
#define CONFIG_RAMBOOTCOMMAND \
"setenv bootargs root=/dev/ram rw " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off;" \
"bootm ffc00000 ffca0000"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off;" \
"bootm ffc00000"
#define CONFIG_PELK_NOR_KERNEL_NOR_RAMDISK_BOOTCOMMAND \
"setenv ipaddr 192.168.10.203;" \
"setenv serverip 192.168.10.6;" \
"setenv netmask 255.255.255.0;" \
"setenv bootargs root=/dev/ram rw console=ttyS0,9600;" \
"setenv autostart yes;" \
"bootm ffc00000 ffd00000"
/*
"setenv ethaddr 00:50:c2:1e:af:fe;" \
"setenv eth1addr 00:50:c2:1e:af:fd;" \
*/
#define CONFIG_BOOTCOMMAND CONFIG_PELK_NOR_KERNEL_NOR_RAMDISK_BOOTCOMMAND
/* Ethernet stuff */
#define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */
#define CONFIG_ETHADDR 00:50:c2:1e:af:fe
#define CONFIG_ETH1ADDR 00:50:c2:1e:af:fd
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
/* EThernet stuff */
#define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */
#define CONFIG_ETHADDR 00:50:c2:1e:af:fe
#define CONFIG_ETH1ADDR 00:50:c2:1e:af:fd
#undef CONFIG_EXT_PHY
#define CONFIG_MII 1 /* MII PHY management */
@ -548,18 +518,16 @@
#if 1 /* test-only */
#define CONFIG_NO_SERIAL_EEPROM
/*#undef CONFIG_NO_SERIAL_EEPROM*/
/*----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------*/
/*--------------------------------------------------------------------*/
#ifdef CONFIG_NO_SERIAL_EEPROM
/*
!-------------------------------------------------------------------------------
!-----------------------------------------------------------------------
! Defines for entry options.
! Note: Because the 405EP SDRAM controller does not support ECC, ECC DIMMs that
! are plugged in the board will be utilized as non-ECC DIMMs.
!-------------------------------------------------------------------------------
!-----------------------------------------------------------------------
*/
#undef AUTO_MEMORY_CONFIG
#define DIMM_READ_ADDR 0xAB
@ -678,10 +646,10 @@
#define PLL_PCIDIV_4 0x00000003
/*
!-------------------------------------------------------------------------------
!-----------------------------------------------------------------------
! PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
! assuming a 33.3MHz input clock to the 405EP.
!-------------------------------------------------------------------------------
!-----------------------------------------------------------------------
*/
#define PLLMR0_133_66_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \
PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \