diff --git a/CHANGELOG b/CHANGELOG index b5d72f394..1fc36985f 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,17 @@ Changes for U-Boot 1.1.3: ====================================================================== +* Patches by Robert Whaley, 29 Nov 2004: + - update the pxa-regs.h file for PXA27x chips + - add PXA27x based ADSVIX board + - add support for MMC on PXA27x processors + +* Patch by Andrew E. Mileski, 28 Nov 2004: + Fix PPC4xx SPD SDRAM detection bug + +* Patch by Hiroshi Ito, 26 Nov 2004: + Fix logic of "test -z" and "test -n" commands + * Patch by Ladislav Michl, 05 Apr 2005: Add support for VoiceBlue board. diff --git a/CREDITS b/CREDITS index 252a4b2e7..cec74a9f6 100644 --- a/CREDITS +++ b/CREDITS @@ -402,6 +402,10 @@ N: Christian Vejlbo E: christian.vejlbo@tellabs.com D: FADS860T ethernet support +N: Robert Whaley +E: rwhaley@applieddata.net +D: Port to ARM PXA27x adsvix SBC + N: Martin Winistoerfer E: martinwinistoerfer@gmx.ch D: Port to MPC555/556 microcontrollers and support for cmi board diff --git a/MAKEALL b/MAKEALL index 426c6a65e..69d7760be 100644 --- a/MAKEALL +++ b/MAKEALL @@ -170,9 +170,9 @@ LIST_ARM11="omap2420h4" ######################################################################### LIST_pxa=" \ - cerf250 cradle csb226 innokom \ - lubbock wepep250 xaeniax xm250 \ - xsengine \ + adsvix cerf250 cradle csb226 \ + innokom lubbock wepep250 xaeniax \ + xm250 xsengine \ " LIST_ixp="ixdp425" diff --git a/Makefile b/Makefile index f93c86b35..63a2c31fb 100644 --- a/Makefile +++ b/Makefile @@ -1432,6 +1432,9 @@ cmc_pu2_config : unconfig ## XScale Systems ######################################################################### +adsvix_config : unconfig + @./mkconfig $(@:_config=) arm pxa adsvix + cerf250_config : unconfig @./mkconfig $(@:_config=) arm pxa cerf250 diff --git a/board/adsvix/Makefile b/board/adsvix/Makefile new file mode 100644 index 000000000..ae514aa06 --- /dev/null +++ b/board/adsvix/Makefile @@ -0,0 +1,48 @@ + +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := adsvix.o pcmcia.o +SOBJS := memsetup.o pxavoltage.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/adsvix/adsvix.c b/board/adsvix/adsvix.c new file mode 100644 index 000000000..5e770e949 --- /dev/null +++ b/board/adsvix/adsvix.c @@ -0,0 +1,77 @@ +/* + * (C) Copyright 2004 + * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +/* ------------------------------------------------------------------------- */ + +/* + * Miscelaneous platform dependent initialisations + */ + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + /* arch number of ADSVIX-Board */ + gd->bd->bi_arch_number = 620; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0xa000003c; + + return 0; +} + +int board_late_init(void) +{ + setenv("stdout", "serial"); + setenv("stderr", "serial"); + return 0; +} + + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; + gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; + gd->bd->bi_dram[3].start = PHYS_SDRAM_4; + gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; + + return 0; +} diff --git a/board/adsvix/config.mk b/board/adsvix/config.mk new file mode 100644 index 000000000..98be4ebe0 --- /dev/null +++ b/board/adsvix/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0xa1700000 diff --git a/board/adsvix/memsetup.S b/board/adsvix/memsetup.S new file mode 100644 index 000000000..7b6abd6b5 --- /dev/null +++ b/board/adsvix/memsetup.S @@ -0,0 +1,468 @@ +/* + * This was originally from the Lubbock u-boot port. + * + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * NOTE: I haven't clean this up considerably, just enough to get it + * running. See hal_platform_setup.h for the source. See + * board/cradle/memsetup.S for another PXA250 setup that is + * much cleaner. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + + +/* + * Memory setup + */ + +.globl memsetup +memsetup: + + /* Set up GPIO pins first ----------------------------------------- */ + + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + ldr r0, =GPSR3 + ldr r1, =CFG_GPSR3_VAL + str r1, [r0] + + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + ldr r0, =GPCR3 + ldr r1, =CFG_GPCR3_VAL + str r1, [r0] + + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + ldr r0, =GPDR3 + ldr r1, =CFG_GPDR3_VAL + str r1, [r0] + + ldr r0, =GAFR0_L + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + + ldr r0, =GAFR0_U + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + + ldr r0, =GAFR1_L + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + + ldr r0, =GAFR1_U + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + + ldr r0, =GAFR2_L + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + + ldr r0, =GAFR2_U + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + ldr r0, =GAFR3_L + ldr r1, =CFG_GAFR3_L_VAL + str r1, [r0] + + ldr r0, =GAFR3_U + ldr r1, =CFG_GAFR3_U_VAL + str r1, [r0] + + ldr r0, =PSSR /* enable GPIO pins */ + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + + /* ---------------------------------------------------------------- */ + /* Enable memory interface */ + /* */ + /* The sequence below is based on the recommended init steps */ + /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ + /* Chapter 10. */ + /* ---------------------------------------------------------------- */ + + /* ---------------------------------------------------------------- */ + /* Step 1: Wait for at least 200 microsedonds to allow internal */ + /* clocks to settle. Only necessary after hard reset... */ + /* FIXME: can be optimized later */ + /* ---------------------------------------------------------------- */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + +mem_init: + + ldr r1, =MEMC_BASE /* get memory controller base addr. */ + + /* ---------------------------------------------------------------- */ + /* Step 2a: Initialize Asynchronous static memory controller */ + /* ---------------------------------------------------------------- */ + + /* MSC registers: timing, bus width, mem type */ + + /* MSC0: nCS(0,1) */ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ + /* that data latches */ + /* MSC1: nCS(2,3) */ + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] + + /* MSC2: nCS(4,5) */ + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2b: Initialize Card Interface */ + /* ---------------------------------------------------------------- */ + + /* MECR: Memory Expansion Card Register */ + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] + ldr r2, [r1, #MECR_OFFSET] + + /* MCMEM0: Card Interface slot 0 timing */ + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] + ldr r2, [r1, #MCMEM0_OFFSET] + + /* MCMEM1: Card Interface slot 1 timing */ + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] + ldr r2, [r1, #MCMEM1_OFFSET] + + /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] + ldr r2, [r1, #MCATT0_OFFSET] + + /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] + ldr r2, [r1, #MCATT1_OFFSET] + + /* MCIO0: Card Interface I/O Space Timing, slot 0 */ + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] + ldr r2, [r1, #MCIO0_OFFSET] + + /* MCIO1: Card Interface I/O Space Timing, slot 1 */ + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] + ldr r2, [r1, #MCIO1_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2c: Write FLYCNFG FIXME: what's that??? */ + /* ---------------------------------------------------------------- */ + ldr r2, =CFG_FLYCNFG_VAL + str r2, [r1, #FLYCNFG_OFFSET] + str r2, [r1, #FLYCNFG_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ + /* ---------------------------------------------------------------- */ + + /* Before accessing MDREFR we need a valid DRI field, so we set */ + /* this to power on defaults + DRI field. */ + + ldr r4, [r1, #MDREFR_OFFSET] + ldr r2, =0xFFF + bic r4, r4, r2 + + ldr r3, =CFG_MDREFR_VAL + and r3, r3, r2 + + orr r4, r4, r3 + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + + orr r4, r4, #MDREFR_K0RUN + orr r4, r4, #MDREFR_K0DB4 + orr r4, r4, #MDREFR_K0FREE + orr r4, r4, #MDREFR_K0DB2 + orr r4, r4, #MDREFR_K1DB2 + bic r4, r4, #MDREFR_K1FREE + bic r4, r4, #MDREFR_K2FREE + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + /* Note: preserve the mdrefr value in r4 */ + + + /* ---------------------------------------------------------------- */ + /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ + /* ---------------------------------------------------------------- */ + + /* Initialize SXCNFG register. Assert the enable bits */ + + /* Write SXMRS to cause an MRS command to all enabled banks of */ + /* synchronous static memory. Note that SXLCR need not be written */ + /* at this time. */ + + ldr r2, =CFG_SXCNFG_VAL + str r2, [r1, #SXCNFG_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 4: Initialize SDRAM */ + /* ---------------------------------------------------------------- */ + + bic r4, r4, #(MDREFR_K2FREE |MDREFR_K1FREE | MDREFR_K0FREE) + + orr r4, r4, #MDREFR_K1RUN + bic r4, r4, #MDREFR_K2DB2 + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + bic r4, r4, #MDREFR_SLFRSH + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + orr r4, r4, #MDREFR_E1PIN + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + nop + nop + + + /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ + /* configure but not enable each SDRAM partition pair. */ + + ldr r4, =CFG_MDCNFG_VAL + bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) + bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) + + str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ + ldr r4, [r1, #MDCNFG_OFFSET] + + + /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ + /* 100..200 µsec. */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + + /* Step 4f: Trigger a number (usually 8) refresh cycles by */ + /* attempting non-burst read or write accesses to disabled */ + /* SDRAM, as commonly specified in the power up sequence */ + /* documented in SDRAM data sheets. The address(es) used */ + /* for this purpose must not be cacheable. */ + + ldr r3, =CFG_DRAM_BASE + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + + + /* Step 4g: Write MDCNFG with enable bits asserted */ + /* (MDCNFG:DEx set to 1). */ + + ldr r3, [r1, #MDCNFG_OFFSET] + mov r4, r3 + orr r3, r3, #MDCNFG_DE0 + str r3, [r1, #MDCNFG_OFFSET] + mov r0, r3 + + /* Step 4h: Write MDMRS. */ + + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + /* enable APD */ + ldr r3, [r1, #MDREFR_OFFSET] + orr r3, r3, #MDREFR_APD + str r3, [r1, #MDREFR_OFFSET] + + /* We are finished with Intel's memory controller initialisation */ + +setvoltage: + + mov r10, lr + bl initPXAvoltage /* In case the board is rebooting with a */ + mov lr, r10 /* low voltage raise it up to a good one. */ + +wakeup: + /* Are we waking from sleep? */ + ldr r0, =RCSR + ldr r1, [r0] + and r1, r1, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR) + str r1, [r0] + teq r1, #RCSR_SMR + + bne initirqs + + ldr r0, =PSSR + mov r1, #PSSR_PH + str r1, [r0] + + /* if so, resume at PSPR */ + ldr r0, =PSPR + ldr r1, [r0] + mov pc, r1 + + /* ---------------------------------------------------------------- */ + /* Disable (mask) all interrupts at interrupt controller */ + /* ---------------------------------------------------------------- */ + +initirqs: + + mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ + ldr r2, =ICLR + str r1, [r2] + + ldr r2, =ICMR /* mask all interrupts at the controller */ + str r1, [r2] + + /* ---------------------------------------------------------------- */ + /* Clock initialisation */ + /* ---------------------------------------------------------------- */ + +initclks: + + /* Disable the peripheral clocks, and set the core clock frequency */ + + /* Turn Off on-chip peripheral clocks (except for memory) */ + /* for re-configuration. */ + ldr r1, =CKEN + ldr r2, =CFG_CKEN + str r2, [r1] + + /* ... and write the core clock config register */ + ldr r2, =CFG_CCCR + ldr r1, =CCCR + str r2, [r1] + + /* Turn on turbo mode */ + mrc p14, 0, r2, c6, c0, 0 + orr r2, r2, #0xB /* Turbo, Fast-Bus, Freq change**/ + mcr p14, 0, r2, c6, c0, 0 + + /* Re-write MDREFR */ + ldr r1, =MEMC_BASE + ldr r2, [r1, #MDREFR_OFFSET] + str r2, [r1, #MDREFR_OFFSET] +#ifdef RTC + /* enable the 32Khz oscillator for RTC and PowerManager */ + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] + + /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ + /* has settled. */ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b +#else +#error "RTC not defined" +#endif + + /* Interrupt init: Mask all interrupts */ + ldr r0, =ICMR /* enable no sources */ + mov r1, #0 + str r1, [r0] + /* FIXME */ + +// #define NODEBUG +#ifdef NODEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ + +#endif + + /* ---------------------------------------------------------------- */ + /* End memsetup */ + /* ---------------------------------------------------------------- */ + +endmemsetup: + + mov pc, lr diff --git a/board/adsvix/pcmcia.c b/board/adsvix/pcmcia.c new file mode 100644 index 000000000..ba5be0139 --- /dev/null +++ b/board/adsvix/pcmcia.c @@ -0,0 +1,67 @@ +/* + * (C) Copyright 2004 + * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +void pcmcia_power_on(void) +{ +#if 0 + if (!(GPLR(20) & GPIO_bit(20))) { /* 3.3V */ + GPCR(81) = GPIO_bit(81); + GPSR(82) = GPIO_bit(82); + } + else if (!(GPLR(21) & GPIO_bit(21))) { /* 5.0V */ + GPCR(81) = GPIO_bit(81); + GPCR(82) = GPIO_bit(82); + } +#else +#warning "Board will only supply 5V, wait for next HW spin for selectable power" + /* 5.0V */ + GPCR(81) = GPIO_bit(81); + GPCR(82) = GPIO_bit(82); +#endif + + udelay(300000); + + /* reset the card */ + GPSR(52) = GPIO_bit(52); + + /* enable PCMCIA */ + GPCR(83) = GPIO_bit(83); + + /* clear reset */ + udelay(10); + GPCR(52) = GPIO_bit(52); + + udelay(20000); +} + +void pcmcia_power_off(void) +{ + /* 0V */ + GPSR(81) = GPIO_bit(81); + GPSR(82) = GPIO_bit(82); + /* disable PCMCIA */ + GPSR(83) = GPIO_bit(83); +} diff --git a/board/adsvix/pxavoltage.S b/board/adsvix/pxavoltage.S new file mode 100644 index 000000000..5a0359c36 --- /dev/null +++ b/board/adsvix/pxavoltage.S @@ -0,0 +1,231 @@ +/* + * (C) Copyright 2004 + * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#define LTC1663_ADDR 0x20 + +#define LTC1663_SY 0x01 /* Sync ACK */ +#define LTC1663_SD 0x04 /* shutdown */ +#define LTC1663_BG 0x04 /* Internal Voltage Ref */ + +#define VOLT_1_55 18 /* DAC value for 1.55V */ + + .global initPXAvoltage + +@ Set the voltage to 1.55V early in the boot process so we can run +@ at a high clock speed and boot quickly. Note that this is necessary +@ because the reset button does not reset the CPU voltage, so if the +@ voltage was low (say 0.85V) then the CPU would crash without this +@ routine + +@ This routine clobbers r0-r4 + +initializei2c: + + ldr r2, =CKEN + ldr r3, [r2] + orr r3, r3, #CKEN15_PWRI2C + str r3, [r2] + + ldr r2, =PCFR + ldr r3, [r2] + orr r3, r3, #PCFR_PI2C_EN + str r3, [r2] + + /* delay for about 250msec + */ + ldr r3, =OSCR + mov r2, #0 + str r2, [r3] + ldr r1, =0xC0000 + +1: + ldr r2, [r3] + cmp r1, r2 + bgt 1b + ldr r0, =PWRICR + ldr r1, [r0] + bic r1, r1, #(ICR_MA | ICR_START | ICR_STOP) + str r1, [r0] + + orr r1, r1, #ICR_UR + str r1, [r0] + + ldr r2, =PWRISR + ldr r3, =0x7ff + str r3, [r2] + + bic r1, r1, #ICR_UR + str r1, [r0] + + mov r1, #(ICR_GCD | ICR_SCLE) + str r1, [r0] + + orr r1, r1, #ICR_IUE + str r1, [r0] + + orr r1, r1, #ICR_FM + str r1, [r0] + + /* delay for about 1msec + */ + ldr r3, =OSCR + mov r2, #0 + str r2, [r3] + ldr r1, =0xC00 + +1: + ldr r2, [r3] + cmp r1, r2 + bgt 1b + mov pc, lr + +sendbytei2c: + ldr r3, =PWRIDBR + str r0, [r3] + ldr r3, =PWRICR + ldr r0, [r3] + orr r0, r0, r1 + bic r0, r0, r2 + str r0, [r3] + orr r0, r0, #ICR_TB + str r0, [r3] + + mov r2, #0x100000 + +waitfortxemptyi2c: + + ldr r0, =PWRISR + ldr r1, [r0] + + /* take it from the top if we don't get empty after a while */ + subs r2, r2, #1 + moveq lr, r4 + beq initPXAvoltage + + tst r1, #ISR_ITE + + beq waitfortxemptyi2c + + orr r1, r1, #ISR_ITE + str r1, [r0] + + mov pc, lr + +initPXAvoltage: + + mov r4, lr + + bl setleds + + bl initializei2c + + bl setleds + + /* now send the real message to set the correct voltage */ + ldr r0, =LTC1663_ADDR + mov r0, r0, LSL #1 + mov r1, #ICR_START + ldr r2, =(ICR_STOP | ICR_ALDIE | ICR_ACKNAK) + bl sendbytei2c + + bl setleds + + mov r0, #LTC1663_BG + mov r1, #0 + mov r2, #(ICR_STOP | ICR_START) + bl sendbytei2c + + bl setleds + + ldr r0, =VOLT_1_55 + and r0, r0, #0xff + mov r1, #0 + mov r2, #(ICR_STOP | ICR_START) + bl sendbytei2c + + bl setleds + + ldr r0, =VOLT_1_55 + mov r0, r0, ASR #8 + and r0, r0, #0xff + mov r1, #ICR_STOP + mov r2, #ICR_START + bl sendbytei2c + + bl setleds + + @ delay a little for the volatage to stablize + ldr r3, =OSCR + mov r2, #0 + str r2, [r3] + ldr r1, =0xC0 + +1: + ldr r2, [r3] + cmp r1, r2 + bgt 1b + mov pc, r4 + +setleds: + mov pc, lr + + ldr r5, =0x40e00058 + ldr r3, [r5] + bic r3, r3, #0x3 + str r3, [r5] + ldr r5, =0x40e0000c + ldr r3, [r5] + orr r3, r3, #0x00010000 + str r3, [r5] + + @ inner loop + mov r0, #0x2 +1: + + ldr r5, =0x40e00018 + mov r3, #0x00010000 + str r3, [r5] + + @ outer loop + mov r3, #0x00F00000 +2: + subs r3, r3, #1 + bne 2b + + ldr r5, =0x40e00024 + mov r3, #0x00010000 + str r3, [r5] + + @ outer loop + mov r3, #0x00F00000 +3: + subs r3, r3, #1 + bne 3b + + subs r0, r0, #1 + bne 1b + + mov pc, lr + diff --git a/board/adsvix/u-boot.lds b/board/adsvix/u-boot.lds new file mode 100644 index 000000000..58c371df0 --- /dev/null +++ b/board/adsvix/u-boot.lds @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/pxa/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/common/command.c b/common/command.c index 64e56af13..2b4c5547b 100644 --- a/common/command.c +++ b/common/command.c @@ -136,9 +136,9 @@ do_test (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (adv == 2) { if (strcmp(ap[0], "-z") == 0) - expr = strlen(ap[1]) == 0 ? 0 : 1; - else if (strcmp(ap[0], "-n") == 0) expr = strlen(ap[1]) == 0 ? 1 : 0; + else if (strcmp(ap[0], "-n") == 0) + expr = strlen(ap[1]) == 0 ? 0 : 1; else { expr = 1; break; diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/spd_sdram.c index 44e826fbe..794a72c8b 100644 --- a/cpu/ppc4xx/spd_sdram.c +++ b/cpu/ppc4xx/spd_sdram.c @@ -1082,7 +1082,7 @@ void program_rtr (unsigned long* dimm_populated, case 0x00: refresh_rate = 15625; break; - case 0x011: + case 0x01: refresh_rate = 15625/4; break; case 0x02: diff --git a/cpu/pxa/mmc.c b/cpu/pxa/mmc.c index 449596297..f7020eec9 100644 --- a/cpu/pxa/mmc.c +++ b/cpu/pxa/mmc.c @@ -72,13 +72,11 @@ mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat) status = MMC_STAT; debug("MMC status %x\n", status); - if (status & MMC_STAT_TIME_OUT_RESPONSE) - { + if (status & MMC_STAT_TIME_OUT_RESPONSE) { return 0; } - switch (cmdat & 0x3) - { + switch (cmdat & 0x3) { case MMC_CMDAT_R1: case MMC_CMDAT_R3: words = 3; @@ -91,8 +89,7 @@ mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat) default: return 0; } - for (i = words-1; i >= 0; i--) - { + for (i = words-1; i >= 0; i--) { ulong res_fifo = MMC_RES; int offset = i << 1; @@ -100,8 +97,7 @@ mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat) resp[offset+1] = ((uchar *)&res_fifo)[1]; } #ifdef MMC_DEBUG - for (i=0; iid[0], cid->id[1], cid->id[2]); @@ -451,6 +431,7 @@ mmc_init(int verbose) } /* fill in device description */ mmc_dev.if_type = IF_TYPE_MMC; + mmc_dev.part_type = PART_TYPE_DOS; mmc_dev.dev = 0; mmc_dev.lun = 0; mmc_dev.type = 0; @@ -468,8 +449,7 @@ mmc_init(int verbose) /* MMC exists, get CSD too */ resp = mmc_cmd(MMC_CMD_SET_RCA, MMC_DEFAULT_RCA, 0, MMC_CMDAT_R1); resp = mmc_cmd(MMC_CMD_SEND_CSD, MMC_DEFAULT_RCA, 0, MMC_CMDAT_R2); - if (resp) - { + if (resp) { mmc_csd_t *csd = (mmc_csd_t *)resp; memcpy(&mmc_csd, csd, sizeof(csd)); rc = 0; @@ -478,7 +458,11 @@ mmc_init(int verbose) } } +#ifdef CONFIG_PXA27X + MMC_CLKRT = 1; /* 10 MHz - see Intel errata */ +#else MMC_CLKRT = 0; /* 20 MHz */ +#endif resp = mmc_cmd(7, MMC_DEFAULT_RCA, 0, MMC_CMDAT_R1); fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */ @@ -496,11 +480,10 @@ int mmc2info(ulong addr) { /* FIXME hard codes to 32 MB device */ - if (addr >= CFG_MMC_BASE && addr < CFG_MMC_BASE + 0x02000000) - { + if (addr >= CFG_MMC_BASE && addr < CFG_MMC_BASE + 0x02000000) { return 1; } return 0; } -#endif +#endif /* CONFIG_MMC */ diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index a59838c18..41d37d791 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -22,18 +22,17 @@ /* FIXME hack so that SA-1111.h will work [cb] */ #ifndef __ASSEMBLY__ -typedef unsigned short Word16 ; -typedef unsigned int Word32 ; -typedef Word32 Word ; -typedef Word Quad [4] ; -typedef void *Address ; -typedef void (*ExcpHndlr) (void) ; +typedef unsigned short Word16 ; +typedef unsigned int Word32 ; +typedef Word32 Word ; +typedef Word Quad [4] ; +typedef void *Address ; +typedef void (*ExcpHndlr) (void) ; #endif /* * PXA Chip selects */ - #define PXA_CS0_PHYS 0x00000000 #define PXA_CS1_PHYS 0x04000000 #define PXA_CS2_PHYS 0x08000000 @@ -41,50 +40,46 @@ typedef void (*ExcpHndlr) (void) ; #define PXA_CS4_PHYS 0x10000000 #define PXA_CS5_PHYS 0x14000000 - /* * Personal Computer Memory Card International Association (PCMCIA) sockets */ - #define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ -#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ -#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ +#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ +#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ -#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ +#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ -#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ -#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ +#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ +#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ -#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ +#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ -#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ -#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ +#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ +#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ -#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ +#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ -#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ +#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ (0x20000000 + (Nb)*PCMCIASp) -#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ -#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ +#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ +#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ (_PCMCIA (Nb) + 2*PCMCIAPrtSp) -#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ +#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ (_PCMCIA (Nb) + 3*PCMCIAPrtSp) -#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ -#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ -#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ -#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ - -#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ -#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ -#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ -#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ +#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ +#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ +#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ +#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ +#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ +#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ +#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ +#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ /* * DMA Controller */ - #define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ #define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ #define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ @@ -107,6 +102,17 @@ typedef void (*ExcpHndlr) (void) ; #define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ #define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ #define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ + +#if defined(CONFIG_PXA27X) +#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ +#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ +#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ +#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ +#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ +#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ +#define DCSR_ENRINTR (1 << 9) /* The end of Receive */ +#endif + #define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ #define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ #define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ @@ -156,6 +162,10 @@ typedef void (*ExcpHndlr) (void) ; #define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ #define DRCMR39 __REG(0x4000019C) /* Reserved */ +#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */ +#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */ +#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */ + #define DRCMRRXSADR DRCMR2 #define DRCMRTXSADR DRCMR3 #define DRCMRRXBTRBR DRCMR4 @@ -252,11 +262,11 @@ typedef void (*ExcpHndlr) (void) ; #define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ #define DDADR_STOP (1 << 0) /* Stop (read / write) */ -#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ -#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ +#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ +#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ #define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ #define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ -#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ +#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ #define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ #define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ #define DCMD_BURST8 (1 << 16) /* 8 byte burst */ @@ -272,11 +282,9 @@ typedef void (*ExcpHndlr) (void) ; #define DCMD_RXMCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4) #define DCMD_TXPCDR (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4) - /* * UARTs */ - /* Full Function UART (FFUART) */ #define FFUART FFRBR #define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ @@ -417,19 +425,24 @@ typedef void (*ExcpHndlr) (void) ; /* * I2C registers */ - #define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */ #define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */ #define ICR __REG(0x40301690) /* I2C Control Register - ICR */ #define ISR __REG(0x40301698) /* I2C Status Register - ISR */ #define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ +#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */ +#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */ +#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */ +#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */ +#define PWRISAR __REG(0x40f001A0) /* Power I2C Slave Address Register-ISAR */ + /* ----- Control register bits ---------------------------------------- */ #define ICR_START 0x1 /* start bit */ #define ICR_STOP 0x2 /* stop bit */ #define ICR_ACKNAK 0x4 /* send ACK(0) or NAK(1) */ -#define ICR_TB 0x8 /* transfer byte bit */ +#define ICR_TB 0x8 /* transfer byte bit */ #define ICR_MA 0x10 /* master abort */ #define ICR_SCLE 0x20 /* master clock enable */ #define ICR_IUE 0x40 /* unit enable */ @@ -438,33 +451,31 @@ typedef void (*ExcpHndlr) (void) ; #define ICR_IRFIE 0x200 /* enable rx interrupts */ #define ICR_BEIE 0x400 /* enable bus error ints */ #define ICR_SSDIE 0x800 /* slave STOP detected int enable */ -#define ICR_ALDIE 0x1000 /* enable arbitration interrupt */ +#define ICR_ALDIE 0x1000 /* enable arbitration interrupt */ #define ICR_SADIE 0x2000 /* slave address detected int enable */ #define ICR_UR 0x4000 /* unit reset */ #define ICR_FM 0x8000 /* Fast Mode */ /* ----- Status register bits ----------------------------------------- */ -#define ISR_RWM 0x1 /* read/write mode */ -#define ISR_ACKNAK 0x2 /* ack/nak status */ -#define ISR_UB 0x4 /* unit busy */ -#define ISR_IBB 0x8 /* bus busy */ -#define ISR_SSD 0x10 /* slave stop detected */ -#define ISR_ALD 0x20 /* arbitration loss detected */ -#define ISR_ITE 0x40 /* tx buffer empty */ -#define ISR_IRF 0x80 /* rx buffer full */ -#define ISR_GCAD 0x100 /* general call address detected */ -#define ISR_SAD 0x200 /* slave address detected */ -#define ISR_BED 0x400 /* bus error no ACK/NAK */ +#define ISR_RWM 0x1 /* read/write mode */ +#define ISR_ACKNAK 0x2 /* ack/nak status */ +#define ISR_UB 0x4 /* unit busy */ +#define ISR_IBB 0x8 /* bus busy */ +#define ISR_SSD 0x10 /* slave stop detected */ +#define ISR_ALD 0x20 /* arbitration loss detected */ +#define ISR_ITE 0x40 /* tx buffer empty */ +#define ISR_IRF 0x80 /* rx buffer full */ +#define ISR_GCAD 0x100 /* general call address detected */ +#define ISR_SAD 0x200 /* slave address detected */ +#define ISR_BED 0x400 /* bus error no ACK/NAK */ /* * Serial Audio Controller */ - - /* FIXME the audio defines collide w/ the SA1111 defines. I don't like these - * short defines because there is too much chance of namespace collision */ - + * short defines because there is too much chance of namespace collision + */ /*#define SACR0 __REG(0x40400000) / Global Control Register */ /*#define SACR1 __REG(0x40400004) / Serial Audio I 2 S/MSB-Justified Control Register */ /*#define SASR0 __REG(0x4040000C) / Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ @@ -477,7 +488,6 @@ typedef void (*ExcpHndlr) (void) ; /* * AC97 Controller registers */ - #define POCR __REG(0x40500000) /* PCM Out Control Register */ #define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ @@ -551,7 +561,6 @@ typedef void (*ExcpHndlr) (void) ; #define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ #define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ - /* * USB Device Controller */ @@ -710,11 +719,63 @@ typedef void (*ExcpHndlr) (void) ; #define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */ #define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */ +#if defined(CONFIG_PXA27X) +/* + * USB Host Controller + */ +#define UHCREV __REG(0x4C000000) +#define UHCHCON __REG(0x4C000004) +#define UHCCOMS __REG(0x4C000008) +#define UHCINTS __REG(0x4C00000C) +#define UHCINTE __REG(0x4C000010) +#define UHCINTD __REG(0x4C000014) +#define UHCHCCA __REG(0x4C000018) +#define UHCPCED __REG(0x4C00001C) +#define UHCCHED __REG(0x4C000020) +#define UHCCCED __REG(0x4C000024) +#define UHCBHED __REG(0x4C000028) +#define UHCBCED __REG(0x4C00002C) +#define UHCDHEAD __REG(0x4C000030) +#define UHCFMI __REG(0x4C000034) +#define UHCFMR __REG(0x4C000038) +#define UHCFMN __REG(0x4C00003C) +#define UHCPERS __REG(0x4C000040) +#define UHCLST __REG(0x4C000044) +#define UHCRHDA __REG(0x4C000048) +#define UHCRHDB __REG(0x4C00004C) +#define UHCRHS __REG(0x4C000050) +#define UHCRHPS1 __REG(0x4C000054) +#define UHCRHPS2 __REG(0x4C000058) +#define UHCRHPS3 __REG(0x4C00005C) +#define UHCSTAT __REG(0x4C000060) +#define UHCHR __REG(0x4C000064) +#define UHCHIE __REG(0x4C000068) +#define UHCHIT __REG(0x4C00006C) + +#define UHCHR_FSBIR (1<<0) +#define UHCHR_FHR (1<<1) +#define UHCHR_CGR (1<<2) +#define UHCHR_SSDC (1<<3) +#define UHCHR_UIT (1<<4) +#define UHCHR_SSE (1<<5) +#define UHCHR_PSPL (1<<6) +#define UHCHR_PCPL (1<<7) +#define UHCHR_SSEP0 (1<<9) +#define UHCHR_SSEP1 (1<<10) +#define UHCHR_SSEP2 (1<<11) + +#define UHCHIE_UPRIE (1<<13) +#define UHCHIE_UPS2IE (1<<12) +#define UHCHIE_UPS1IE (1<<11) +#define UHCHIE_TAIE (1<<10) +#define UHCHIE_HBAIE (1<<8) +#define UHCHIE_RWIE (1<<7) + +#endif /* * Fast Infrared Communication Port */ - #define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ #define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ #define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ @@ -722,26 +783,36 @@ typedef void (*ExcpHndlr) (void) ; #define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ #define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ - /* * Real Time Clock */ - #define RCNR __REG(0x40900000) /* RTC Count Register */ #define RTAR __REG(0x40900004) /* RTC Alarm Register */ #define RTSR __REG(0x40900008) /* RTC Status Register */ #define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ +#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */ +#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */ +#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */ +#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */ +#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */ +#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */ +#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ +#define RDCR __REG(0x40900010) /* RTC Day Count Register. */ +#define RYCR __REG(0x40900014) /* RTC Year Count Register. */ +#define SWCR __REG(0x40900028) /* Stopwatch Count Register */ +#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */ +#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */ +#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */ +#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */ #define RTSR_HZE (1 << 3) /* HZ interrupt enable */ #define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ #define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ #define RTSR_AL (1 << 0) /* RTC alarm detected */ - /* * OS Timer & Match Registers */ - #define OSMR0 __REG(0x40A00000) /* */ #define OSMR1 __REG(0x40A00004) /* */ #define OSMR2 __REG(0x40A00008) /* */ @@ -763,11 +834,9 @@ typedef void (*ExcpHndlr) (void) ; #define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ #define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ - /* * Pulse Width Modulator */ - #define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */ #define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ #define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ @@ -776,11 +845,9 @@ typedef void (*ExcpHndlr) (void) ; #define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ #define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ - /* * Interrupt Controller */ - #define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ #define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ #define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ @@ -788,11 +855,9 @@ typedef void (*ExcpHndlr) (void) ; #define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ #define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ - /* * General Purpose I/O */ - #define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ #define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ #define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ @@ -831,6 +896,37 @@ typedef void (*ExcpHndlr) (void) ; /* More handy macros. The argument is a literal GPIO number. */ #define GPIO_bit(x) (1 << ((x) & 0x1f)) + +#ifdef CONFIG_PXA27X + +/* Interrupt Controller */ + +#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ +#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ +#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ + +#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) +#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) +#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) +#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) +#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) +#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) +#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) +#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) + +#define GPLR(x) ((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3) +#define GPDR(x) ((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3) +#define GPSR(x) ((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3) +#define GPCR(x) ((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3) +#define GRER(x) ((((x) & 0x7f) < 96) ? _GRER(x) : GRER3) +#define GFER(x) ((((x) & 0x7f) < 96) ? _GFER(x) : GFER3) +#define GEDR(x) ((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3) +#define GAFR(x) ((((x) & 0x7f) < 96) ? _GAFR(x) : \ + ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U)) +#else + #define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) #define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) #define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) @@ -840,6 +936,8 @@ typedef void (*ExcpHndlr) (void) ; #define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) #define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) +#endif + /* GPIO alternate function assignments */ #define GPIO1_RST 1 /* reset */ @@ -968,10 +1066,10 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) #define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) #define GPIO28_BITCLK_I2S_MD (28 | GPIO_ALT_FN_2_IN) -#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) +#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) #define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) #define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) -#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) +#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) #define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) #define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) #define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) @@ -1038,11 +1136,12 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) #define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) +#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT) +#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT) /* * Power Manager */ - #define PMCR __REG(0x40F00000) /* Power Manager Control Register */ #define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ #define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ @@ -1054,8 +1153,62 @@ typedef void (*ExcpHndlr) (void) ; #define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ #define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ #define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ +#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */ #define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ +#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ +#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */ +#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */ +#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */ +#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ +#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ +#define PCMD(x) __REG(0x40F00080 + x*4) +#define PCMD0 __REG(0x40F00080 + 0 * 4) +#define PCMD1 __REG(0x40F00080 + 1 * 4) +#define PCMD2 __REG(0x40F00080 + 2 * 4) +#define PCMD3 __REG(0x40F00080 + 3 * 4) +#define PCMD4 __REG(0x40F00080 + 4 * 4) +#define PCMD5 __REG(0x40F00080 + 5 * 4) +#define PCMD6 __REG(0x40F00080 + 6 * 4) +#define PCMD7 __REG(0x40F00080 + 7 * 4) +#define PCMD8 __REG(0x40F00080 + 8 * 4) +#define PCMD9 __REG(0x40F00080 + 9 * 4) +#define PCMD10 __REG(0x40F00080 + 10 * 4) +#define PCMD11 __REG(0x40F00080 + 11 * 4) +#define PCMD12 __REG(0x40F00080 + 12 * 4) +#define PCMD13 __REG(0x40F00080 + 13 * 4) +#define PCMD14 __REG(0x40F00080 + 14 * 4) +#define PCMD15 __REG(0x40F00080 + 15 * 4) +#define PCMD16 __REG(0x40F00080 + 16 * 4) +#define PCMD17 __REG(0x40F00080 + 17 * 4) +#define PCMD18 __REG(0x40F00080 + 18 * 4) +#define PCMD19 __REG(0x40F00080 + 19 * 4) +#define PCMD20 __REG(0x40F00080 + 20 * 4) +#define PCMD21 __REG(0x40F00080 + 21 * 4) +#define PCMD22 __REG(0x40F00080 + 22 * 4) +#define PCMD23 __REG(0x40F00080 + 23 * 4) +#define PCMD24 __REG(0x40F00080 + 24 * 4) +#define PCMD25 __REG(0x40F00080 + 25 * 4) +#define PCMD26 __REG(0x40F00080 + 26 * 4) +#define PCMD27 __REG(0x40F00080 + 27 * 4) +#define PCMD28 __REG(0x40F00080 + 28 * 4) +#define PCMD29 __REG(0x40F00080 + 29 * 4) +#define PCMD30 __REG(0x40F00080 + 30 * 4) +#define PCMD31 __REG(0x40F00080 + 31 * 4) + +#define PCMD_MBC (1<<12) +#define PCMD_DCE (1<<11) +#define PCMD_LC (1<<10) +/* FIXME: PCMD_SQC need be checked. */ +#define PCMD_SQC (3<<8) /* currently only bit 8 is changerable, */ + /* bit 9 should be 0 all day. */ +#define PVCR_VCSA (0x1<<14) +#define PVCR_CommandDelay (0xf80) +/* define MACRO for Power Manager General Configuration Register (PCFR) */ +#define PCFR_FVC (0x1 << 10) +#define PCFR_PI2C_EN (0x1 << 6) + +#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ #define PSSR_RDH (1 << 5) /* Read Disable Hold */ #define PSSR_PH (1 << 4) /* Peripheral Control Hold */ #define PSSR_VFS (1 << 2) /* VDD Fault Status */ @@ -1072,22 +1225,18 @@ typedef void (*ExcpHndlr) (void) ; #define RCSR_WDR (1 << 1) /* Watchdog Reset */ #define RCSR_HWR (1 << 0) /* Hardware Reset */ - /* * SSP Serial Port Registers */ - #define SSCR0 __REG(0x41000000) /* SSP Control Register 0 */ #define SSCR1 __REG(0x41000004) /* SSP Control Register 1 */ #define SSSR __REG(0x41000008) /* SSP Status Register */ #define SSITR __REG(0x4100000C) /* SSP Interrupt Test Register */ #define SSDR __REG(0x41000010) /* (Write / Read) SSP Data Write Register/SSP Data Read Register */ - /* * MultiMediaCard (MMC) controller */ - #define MMC_STRPCL __REG(0x41100000) /* Control to start and stop MMC clock */ #define MMC_STAT __REG(0x41100004) /* MMC Status Register (read only) */ #define MMC_CLKRT __REG(0x41100008) /* MMC clock rate */ @@ -1107,24 +1256,37 @@ typedef void (*ExcpHndlr) (void) ; #define MMC_RXFIFO __REG(0x41100040) /* Receive FIFO (read only) */ #define MMC_TXFIFO __REG(0x41100044) /* Transmit FIFO (write only) */ - /* * Core Clock */ - #define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ #define CKEN __REG(0x41300004) /* Clock Enable Register */ #define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ #define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ +#if !defined(CONFIG_PXA27X) #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ +#endif #define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ +#define CKEN24_CAMERA (1 << 24) /* Camera Interface Clock Enable */ +#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ +#define CKEN22_MEMC (1 << 22) /* Memory Controller Clock Enable */ +#define CKEN21_MEMSTK (1 << 21) /* Memory Stick Host Controller */ +#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ +#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ +#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ +#define CKEN17_MSL (1 << 17) /* MSL Unit Clock Enable */ #define CKEN16_LCD (1 << 16) /* LCD Unit Clock Enable */ +#define CKEN15_PWRI2C (1 << 15) /* PWR I2C Unit Clock Enable */ #define CKEN14_I2C (1 << 14) /* I2C Unit Clock Enable */ #define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */ #define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */ #define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */ +#if defined(CONFIG_PXA27X) +#define CKEN10_USBHOST (1 << 10) /* USB Host Unit Clock Enable */ +#define CKEN24_CAMERA (1 << 24) /* Camera Unit Clock Enable */ +#endif #define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */ #define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */ #define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */ @@ -1137,34 +1299,36 @@ typedef void (*ExcpHndlr) (void) ; #define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ #define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ -#define CCCR_L09 (0x1F) -#define CCCR_L27 (0x1) -#define CCCR_L32 (0x2) -#define CCCR_L36 (0x3) -#define CCCR_L40 (0x4) -#define CCCR_L45 (0x5) +#if !defined(CONFIG_PXA27X) +#define CCCR_L09 (0x1F) +#define CCCR_L27 (0x1) +#define CCCR_L32 (0x2) +#define CCCR_L36 (0x3) +#define CCCR_L40 (0x4) +#define CCCR_L45 (0x5) -#define CCCR_M1 (0x1 << 5) -#define CCCR_M2 (0x2 << 5) -#define CCCR_M4 (0x3 << 5) +#define CCCR_M1 (0x1 << 5) +#define CCCR_M2 (0x2 << 5) +#define CCCR_M4 (0x3 << 5) -#define CCCR_N10 (0x2 << 7) -#define CCCR_N15 (0x3 << 7) -#define CCCR_N20 (0x4 << 7) -#define CCCR_N25 (0x5 << 7) -#define CCCR_N30 (0x6 << 7) +#define CCCR_N10 (0x2 << 7) +#define CCCR_N15 (0x3 << 7) +#define CCCR_N20 (0x4 << 7) +#define CCCR_N25 (0x5 << 7) +#define CCCR_N30 (0x6 << 7) +#endif /* * LCD */ - #define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */ #define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */ #define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */ #define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */ #define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ #define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ -#define LCSR __REG(0x44000038) /* LCD Controller Status Register */ +#define LCSR0 __REG(0x44000038) /* LCD Controller Status Register */ +#define LCSR1 __REG(0x44000034) /* LCD Controller Status Register */ #define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */ #define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */ #define TMEDCR __REG(0x44000044) /* TMED Control Register */ @@ -1192,51 +1356,56 @@ typedef void (*ExcpHndlr) (void) ; #define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ #define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ #define LCCR0_PDD_S 12 -#define LCCR0_BM (1 << 20) /* Branch mask */ +#define LCCR0_BM (1 << 20) /* Branch mask */ #define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ +#if defined(CONFIG_PXA27X) +#define LCCR0_LCDT (1 << 22) /* LCD Panel Type */ +#define LCCR0_RDSTM (1 << 23) /* Read Status Interrupt Mask */ +#define LCCR0_CMDIM (1 << 24) /* Command Interrupt Mask */ +#endif -#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ -#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ +#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ +#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ (((Pixel) - 1) << FShft (LCCR1_PPL)) -#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ -#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ - /* pulse Width [1..64 Tpix] */ \ +#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ +#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ + /* pulse Width [1..64 Tpix] */ \ (((Tpix) - 1) << FShft (LCCR1_HSW)) -#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ - /* count - 1 [Tpix] */ -#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ - /* [1..256 Tpix] */ \ +#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ + /* count - 1 [Tpix] */ +#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ + /* [1..256 Tpix] */ \ (((Tpix) - 1) << FShft (LCCR1_ELW)) -#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ - /* Wait count - 1 [Tpix] */ -#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ - /* [1..256 Tpix] */ \ +#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ + /* Wait count - 1 [Tpix] */ +#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ + /* [1..256 Tpix] */ \ (((Tpix) - 1) << FShft (LCCR1_BLW)) -#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ -#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ +#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ +#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ (((Line) - 1) << FShft (LCCR2_LPP)) -#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ - /* Width - 1 [Tln] (L_FCLK) */ -#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ - /* Width [1..64 Tln] */ \ +#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ + /* Width - 1 [Tln] (L_FCLK) */ +#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ + /* Width [1..64 Tln] */ \ (((Tln) - 1) << FShft (LCCR2_VSW)) -#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ - /* count [Tln] */ -#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ - /* [0..255 Tln] */ \ +#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ + /* count [Tln] */ +#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ + /* [0..255 Tln] */ \ ((Tln) << FShft (LCCR2_EFW)) -#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ - /* Wait count [Tln] */ -#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ - /* [0..255 Tln] */ \ +#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ + /* Wait count [Tln] */ +#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ + /* [0..255 Tln] */ \ ((Tln) << FShft (LCCR2_BFW)) #if 0 @@ -1257,79 +1426,100 @@ typedef void (*ExcpHndlr) (void) ; #endif #define LCCR3_DPC (1 << 27) /* double pixel clock mode */ +#define LCCR3_PDFOR_0 (0 << 30) +#define LCCR3_PDFOR_1 (1 << 30) +#define LCCR3_PDFOR_2 (2 << 30) +#define LCCR3_PDFOR_3 (3 << 30) -#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ -#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \ + +#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ +#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \ (((Div) << FShft (LCCR3_PCD))) -#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ -#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \ - (((Bpp) << FShft (LCCR3_BPP))) +#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ +#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \ + ((((Bpp&0x7) << FShft (LCCR3_BPP)))|(((Bpp&0x8)<<26))) -#define LCCR3_ACB Fld (8, 8) /* AC Bias */ -#define LCCR3_Acb(Acb) /* BAC Bias */ \ +#define LCCR3_ACB Fld (8, 8) /* AC Bias */ +#define LCCR3_Acb(Acb) /* BAC Bias */ \ (((Acb) << FShft (LCCR3_ACB))) -#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ - /* pulse active High */ -#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ +#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ + /* pulse active High */ +#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ -#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ - /* active High */ -#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ - /* active Low */ +#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ + /* active High */ +#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ + /* active Low */ -#define LCSR_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR_SOF (1 << 1) /* Start of frame */ -#define LCSR_BER (1 << 2) /* Bus error */ -#define LCSR_ABC (1 << 3) /* AC Bias count */ -#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR_OU (1 << 6) /* output FIFO underrun */ -#define LCSR_QD (1 << 7) /* quick disable */ -#define LCSR_EOF (1 << 8) /* end of frame */ -#define LCSR_BS (1 << 9) /* branch status */ -#define LCSR_SINT (1 << 10) /* subsequent interrupt */ - -#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ - -#define LCSR_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR_SOF (1 << 1) /* Start of frame */ -#define LCSR_BER (1 << 2) /* Bus error */ -#define LCSR_ABC (1 << 3) /* AC Bias count */ -#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR_OU (1 << 6) /* output FIFO underrun */ -#define LCSR_QD (1 << 7) /* quick disable */ -#define LCSR_EOF (1 << 8) /* end of frame */ -#define LCSR_BS (1 << 9) /* branch status */ -#define LCSR_SINT (1 << 10) /* subsequent interrupt */ +#define LCSR0_LDD (1 << 0) /* LCD Disable Done */ +#define LCSR0_SOF (1 << 1) /* Start of frame */ +#define LCSR0_BER (1 << 2) /* Bus error */ +#define LCSR0_ABC (1 << 3) /* AC Bias count */ +#define LCSR0_IUL (1 << 4) /* input FIFO underrun Lower panel */ +#define LCSR0_IUU (1 << 5) /* input FIFO underrun Upper panel */ +#define LCSR0_OU (1 << 6) /* output FIFO underrun */ +#define LCSR0_QD (1 << 7) /* quick disable */ +#define LCSR0_EOF0 (1 << 8) /* end of frame */ +#define LCSR0_BS (1 << 9) /* branch status */ +#define LCSR0_SINT (1 << 10) /* subsequent interrupt */ + +#define LCSR1_SOF1 (1 << 0) +#define LCSR1_SOF2 (1 << 1) +#define LCSR1_SOF3 (1 << 2) +#define LCSR1_SOF4 (1 << 3) +#define LCSR1_SOF5 (1 << 4) +#define LCSR1_SOF6 (1 << 5) + +#define LCSR1_EOF1 (1 << 8) +#define LCSR1_EOF2 (1 << 9) +#define LCSR1_EOF3 (1 << 10) +#define LCSR1_EOF4 (1 << 11) +#define LCSR1_EOF5 (1 << 12) +#define LCSR1_EOF6 (1 << 13) + +#define LCSR1_BS1 (1 << 16) +#define LCSR1_BS2 (1 << 17) +#define LCSR1_BS3 (1 << 18) +#define LCSR1_BS4 (1 << 19) +#define LCSR1_BS5 (1 << 20) +#define LCSR1_BS6 (1 << 21) + +#define LCSR1_IU2 (1 << 25) +#define LCSR1_IU3 (1 << 26) +#define LCSR1_IU4 (1 << 27) +#define LCSR1_IU5 (1 << 28) +#define LCSR1_IU6 (1 << 29) #define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ +#if defined(CONFIG_PXA27X) +#define LDCMD_SOFINT (1 << 22) +#define LDCMD_EOFINT (1 << 21) +#endif /* * Memory controller */ - #define MEMC_BASE __REG(0x48000000) /* Base of Memory Controller */ -#define MDCNFG_OFFSET 0x0 -#define MDREFR_OFFSET 0x4 -#define MSC0_OFFSET 0x8 -#define MSC1_OFFSET 0xC -#define MSC2_OFFSET 0x10 -#define MECR_OFFSET 0x14 -#define SXLCR_OFFSET 0x18 -#define SXCNFG_OFFSET 0x1C -#define FLYCNFG_OFFSET 0x20 -#define SXMRS_OFFSET 0x24 -#define MCMEM0_OFFSET 0x28 -#define MCMEM1_OFFSET 0x2C -#define MCATT0_OFFSET 0x30 -#define MCATT1_OFFSET 0x34 -#define MCIO0_OFFSET 0x38 -#define MCIO1_OFFSET 0x3C -#define MDMRS_OFFSET 0x40 +#define MDCNFG_OFFSET 0x0 +#define MDREFR_OFFSET 0x4 +#define MSC0_OFFSET 0x8 +#define MSC1_OFFSET 0xC +#define MSC2_OFFSET 0x10 +#define MECR_OFFSET 0x14 +#define SXLCR_OFFSET 0x18 +#define SXCNFG_OFFSET 0x1C +#define FLYCNFG_OFFSET 0x20 +#define SXMRS_OFFSET 0x24 +#define MCMEM0_OFFSET 0x28 +#define MCMEM1_OFFSET 0x2C +#define MCATT0_OFFSET 0x30 +#define MCATT1_OFFSET 0x34 +#define MCIO0_OFFSET 0x38 +#define MCIO1_OFFSET 0x3C +#define MDMRS_OFFSET 0x40 #define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ #define MDCNFG_DE0 0x00000001 @@ -1369,5 +1559,191 @@ typedef void (*ExcpHndlr) (void) ; #define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ #define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ +#if defined(CONFIG_PXA27X) -#endif +#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ + +#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ +#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ +#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ +#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ +#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ +#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ +#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ +#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ +#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ + +/* Interrupt Controller */ + +#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ +#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ +#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ + +/* General Purpose I/O */ + +#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ +#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ +#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ +#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ +#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ +#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO <127:96> */ +#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ +#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ +#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ + +/* Core Clock */ + +#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ + +#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ +#define CKEN22_MEMC (1 << 22) /* Memory Controler */ +#define CKEN21_MSHC (1 << 21) /* Memery Stick Host Controller */ +#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ +#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ +#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ +#define CKEN17_MSL (1 << 17) /* MSL Interface Unit Clock Enable */ +#define CKEN15_PWR_I2C (1 << 15) /* PWR_I2C Unit Clock Enable */ +#define CKEN9_OST (1 << 9) /* OS Timer Unit Clock Enable */ +#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */ + +/* Memory controller */ + +#define MDREFR_K0DB4 (1 << 29) /* SDCLK[0] divide by 4 */ + +/* LCD registers */ +#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 4 */ +#define LCCR5 __REG(0x44000014) /* LCD Controller Control Register 5 */ +#define FBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ +#define FBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ +#define FBR2 __REG(0x44000028) /* DMA Channel 2 Frame Branch Register */ +#define FBR3 __REG(0x4400002C) /* DMA Channel 3 Frame Branch Register */ +#define FBR4 __REG(0x44000030) /* DMA Channel 4 Frame Branch Register */ +#define FDADR2 __REG(0x44000220) /* DMA Channel 2 Frame Descriptor Address Register */ +#define FSADR2 __REG(0x44000224) /* DMA Channel 2 Frame Source Address Register */ +#define FIDR2 __REG(0x44000228) /* DMA Channel 2 Frame ID Register */ +#define LDCMD2 __REG(0x4400022C) /* DMA Channel 2 Command Register */ +#define FDADR3 __REG(0x44000230) /* DMA Channel 3 Frame Descriptor Address Register */ +#define FSADR3 __REG(0x44000234) /* DMA Channel 3 Frame Source Address Register */ +#define FIDR3 __REG(0x44000238) /* DMA Channel 3 Frame ID Register */ +#define LDCMD3 __REG(0x4400023C) /* DMA Channel 3 Command Register */ +#define FDADR4 __REG(0x44000240) /* DMA Channel 4 Frame Descriptor Address Register */ +#define FSADR4 __REG(0x44000244) /* DMA Channel 4 Frame Source Address Register */ +#define FIDR4 __REG(0x44000248) /* DMA Channel 4 Frame ID Register */ +#define LDCMD4 __REG(0x4400024C) /* DMA Channel 4 Command Register */ +#define FDADR5 __REG(0x44000250) /* DMA Channel 5 Frame Descriptor Address Register */ +#define FSADR5 __REG(0x44000254) /* DMA Channel 5 Frame Source Address Register */ +#define FIDR5 __REG(0x44000258) /* DMA Channel 5 Frame ID Register */ +#define LDCMD5 __REG(0x4400025C) /* DMA Channel 5 Command Register */ + +#define OVL1C1 __REG(0x44000050) /* Overlay 1 Control Register 1 */ +#define OVL1C2 __REG(0x44000060) /* Overlay 1 Control Register 2 */ +#define OVL2C1 __REG(0x44000070) /* Overlay 2 Control Register 1 */ +#define OVL2C2 __REG(0x44000080) /* Overlay 2 Control Register 2 */ +#define CCR __REG(0x44000090) /* Cursor Control Register */ + +#define FBR5 __REG(0x44000110) /* DMA Channel 5 Frame Branch Register */ +#define FBR6 __REG(0x44000114) /* DMA Channel 6 Frame Branch Register */ + +#define LCCR0_LDDALT (1<<26) /* LDD Alternate mapping bit when base pixel is RGBT16 */ +#define LCCR0_OUC (1<<25) /* Overlay Underlay Control Bit */ + +#define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */ +#define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */ +#define LCCR5_SOFM3 (1<<2) /* Start Of Frame Mask for Overlay 2 (channel 3) */ +#define LCCR5_SOFM4 (1<<3) /* Start Of Frame Mask for Overlay 2 (channel 4) */ +#define LCCR5_SOFM5 (1<<4) /* Start Of Frame Mask for cursor (channel 5) */ +#define LCCR5_SOFM6 (1<<5) /* Start Of Frame Mask for command data (channel 6) */ + +#define LCCR5_EOFM1 (1<<8) /* End Of Frame Mask for Overlay 1 (channel 1) */ +#define LCCR5_EOFM2 (1<<9) /* End Of Frame Mask for Overlay 2 (channel 2) */ +#define LCCR5_EOFM3 (1<<10) /* End Of Frame Mask for Overlay 2 (channel 3) */ +#define LCCR5_EOFM4 (1<<11) /* End Of Frame Mask for Overlay 2 (channel 4) */ +#define LCCR5_EOFM5 (1<<12) /* End Of Frame Mask for cursor (channel 5) */ +#define LCCR5_EOFM6 (1<<13) /* End Of Frame Mask for command data (channel 6) */ + +#define LCCR5_BSM1 (1<<16) /* Branch mask for Overlay 1 (channel 1) */ +#define LCCR5_BSM2 (1<<17) /* Branch mask for Overlay 2 (channel 2) */ +#define LCCR5_BSM3 (1<<18) /* Branch mask for Overlay 2 (channel 3) */ +#define LCCR5_BSM4 (1<<19) /* Branch mask for Overlay 2 (channel 4) */ +#define LCCR5_BSM5 (1<<20) /* Branch mask for cursor (channel 5) */ +#define LCCR5_BSM6 (1<<21) /* Branch mask for data command (channel 6) */ + +#define LCCR5_IUM1 (1<<24) /* Input FIFO Underrun Mask for Overlay 1 */ +#define LCCR5_IUM2 (1<<25) /* Input FIFO Underrun Mask for Overlay 2 */ +#define LCCR5_IUM3 (1<<26) /* Input FIFO Underrun Mask for Overlay 2 */ +#define LCCR5_IUM4 (1<<27) /* Input FIFO Underrun Mask for Overlay 2 */ +#define LCCR5_IUM5 (1<<28) /* Input FIFO Underrun Mask for cursor */ +#define LCCR5_IUM6 (1<<29) /* Input FIFO Underrun Mask for data command */ + +#define OVL1C1_O1EN (1<<31) /* Enable bit for Overlay 1 */ +#define OVL2C1_O2EN (1<<31) /* Enable bit for Overlay 2 */ +#define CCR_CEN (1<<31) /* Enable bit for Cursor */ + +/* Keypad controller */ + +#define KPC __REG(0x41500000) /* Keypad Interface Control register */ +#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */ +#define KPREC __REG(0x41500010) /* Keypad Intefcace Rotary Encoder register */ +#define KPMK __REG(0x41500018) /* Keypad Intefcace Matrix Key register */ +#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */ +#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ +#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ +#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ +#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ +#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */ + +#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ +#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ +#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ +#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ +#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */ +#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */ +#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */ +#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */ +#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */ +#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */ +#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */ +#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */ +#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ +#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ +#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Key Debounce select */ +#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ +#define KPC_DEE0 (0x1 << 2) /* Rotary Encoder 0 Enable */ +#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ +#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ + +#define KPDK_DKP (0x1 << 31) +#define KPDK_DK7 (0x1 << 7) +#define KPDK_DK6 (0x1 << 6) +#define KPDK_DK5 (0x1 << 5) +#define KPDK_DK4 (0x1 << 4) +#define KPDK_DK3 (0x1 << 3) +#define KPDK_DK2 (0x1 << 2) +#define KPDK_DK1 (0x1 << 1) +#define KPDK_DK0 (0x1 << 0) + +#define KPREC_OF1 (0x1 << 31) +#define kPREC_UF1 (0x1 << 30) +#define KPREC_OF0 (0x1 << 15) +#define KPREC_UF0 (0x1 << 14) + +#define KPMK_MKP (0x1 << 31) +#define KPAS_SO (0x1 << 31) +#define KPASMKPx_SO (0x1 << 31) + +#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */ +#define PSLR __REG(0x40F00034) +#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */ +#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */ +#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */ +#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */ +#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */ +#define OSMR4 __REG(0x40A00080) /* */ +#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ +#define OMCR4 __REG(0x40A000C0) /* */ + +#endif /* CONFIG_PXA27X */ + +#endif /* _PXA_REGS_H_ */ diff --git a/include/configs/adsvix.h b/include/configs/adsvix.h new file mode 100644 index 000000000..b8797d1bb --- /dev/null +++ b/include/configs/adsvix.h @@ -0,0 +1,352 @@ +/* + * (C) Copyright 2004 + * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * Configuation settings for the LUBBOCK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define RTC + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */ +#define CONFIG_ADSVIX 1 /* on a Adsvix Board */ +#define CONFIG_MMC 1 +#define BOARD_LATE_INIT 1 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * select serial console configuration + */ +#define CONFIG_FFUART 1 /* we use FFUART on ADSVIX */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 38400 + +#define CONFIG_DOS_PARTITION 1 + +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_NET) | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_IDE | CFG_CMD_PCMCIA) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#undef CONFIG_SHOW_BOOT_PROGRESS + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_SERVERIP 192.168.1.99 +#define CONFIG_BOOTCOMMAND "run boot_flash" +#define CONFIG_BOOTARGS "console=ttyS0,38400 ramdisk_size=12288"\ + " rw root=/dev/ram initrd=0xa0800000,5m" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "program_boot_cf=" \ + "mw.b 0xa0010000 0xff 0x20000; " \ + "if pinit on && " \ + "ide reset && " \ + "fatload ide 0 0xa0010000 u-boot.bin; " \ + "then " \ + "protect off 0x0 0x1ffff; " \ + "erase 0x0 0x1ffff; " \ + "cp.b 0xa0010000 0x0 0x20000; " \ + "fi\0" \ + "program_uzImage_cf=" \ + "mw.b 0xa0010000 0xff 0x180000; " \ + "if pinit on && " \ + "ide reset && " \ + "fatload ide 0 0xa0010000 uzImage; " \ + "then " \ + "protect off 0x40000 0x1bffff; " \ + "erase 0x40000 0x1bffff; " \ + "cp.b 0xa0010000 0x40000 0x180000; " \ + "fi\0" \ + "program_ramdisk_cf=" \ + "mw.b 0xa0010000 0xff 0x500000; " \ + "if pinit on && " \ + "ide reset && " \ + "fatload ide 0 0xa0010000 ramdisk.gz; " \ + "then " \ + "protect off 0x1c0000 0x6bffff; " \ + "erase 0x1c0000 0x6bffff; " \ + "cp.b 0xa0010000 0x1c0000 0x500000; " \ + "fi\0" \ + "boot_cf=" \ + "if pinit on && " \ + "ide reset && " \ + "fatload ide 0 0xa0030000 uzImage && " \ + "fatload ide 0 0xa0800000 ramdisk.gz; " \ + "then " \ + "bootm 0xa0030000; " \ + "fi\0" \ + "program_boot_mmc=" \ + "mw.b 0xa0010000 0xff 0x20000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 u-boot.bin; " \ + "then " \ + "protect off 0x0 0x1ffff; " \ + "erase 0x0 0x1ffff; " \ + "cp.b 0xa0010000 0x0 0x20000; " \ + "fi\0" \ + "program_uzImage_mmc=" \ + "mw.b 0xa0010000 0xff 0x180000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 uzImage; " \ + "then " \ + "protect off 0x40000 0x1bffff; " \ + "erase 0x40000 0x1bffff; " \ + "cp.b 0xa0010000 0x40000 0x180000; " \ + "fi\0" \ + "program_ramdisk_mmc=" \ + "mw.b 0xa0010000 0xff 0x500000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 ramdisk.gz; " \ + "then " \ + "protect off 0x1c0000 0x6bffff; " \ + "erase 0x1c0000 0x6bffff; " \ + "cp.b 0xa0010000 0x1c0000 0x500000; " \ + "fi\0" \ + "boot_mmc=" \ + "if mmcinit && " \ + "fatload mmc 0 0xa0030000 uzImage && " \ + "fatload mmc 0 0xa0800000 ramdisk.gz; " \ + "then " \ + "bootm 0xa0030000; " \ + "fi\0" \ + "boot_flash=" \ + "cp.b 0x1c0000 0xa0800000 0x500000; " \ + "bootm 0x40000\0" \ + +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +/* #define CONFIG_INITRD_TAG 1 */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xa1000000 /* default load address */ + +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_MMC_BASE 0xF0000000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ + +#define CFG_DRAM_BASE 0xa0000000 +#define CFG_DRAM_SIZE 0x04000000 + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/* + * GPIO settings + */ + +#define CFG_GPSR0_VAL 0x00018004 +#define CFG_GPSR1_VAL 0x004F0080 +#define CFG_GPSR2_VAL 0x13EFC000 +#define CFG_GPSR3_VAL 0x0006E032 +#define CFG_GPCR0_VAL 0x084AFE1A +#define CFG_GPCR1_VAL 0x003003F2 +#define CFG_GPCR2_VAL 0x0C014000 +#define CFG_GPCR3_VAL 0x00000C00 +#define CFG_GPDR0_VAL 0xCBC3BFFC +#define CFG_GPDR1_VAL 0x00FFABF3 +#define CFG_GPDR2_VAL 0x1EEFFC00 +#define CFG_GPDR3_VAL 0x0187EC32 +#define CFG_GAFR0_L_VAL 0x84400000 +#define CFG_GAFR0_U_VAL 0xA51A8010 +#define CFG_GAFR1_L_VAL 0x699A955A +#define CFG_GAFR1_U_VAL 0x0005A0AA +#define CFG_GAFR2_L_VAL 0x40000000 +#define CFG_GAFR2_U_VAL 0x0109A400 +#define CFG_GAFR3_L_VAL 0x54000000 +#define CFG_GAFR3_U_VAL 0x00001409 + +#define CFG_PSSR_VAL 0x20 + +/* + * Clock settings + */ +#define CFG_CKEN 0x00400200 +#define CFG_CCCR 0x02000290 /* 520Mhz */ +/* #define CFG_CCCR 0x02000210 416 Mhz */ + +/* + * Memory settings + */ + +#define CFG_MSC0_VAL 0x23F2B3DB +#define CFG_MSC1_VAL 0x0000CCD1 +#define CFG_MSC2_VAL 0x0000B884 +#define CFG_MDCNFG_VAL 0x08000AC8 +#define CFG_MDREFR_VAL 0x0000001E +#define CFG_MDMRS_VAL 0x00000000 + +#define CFG_FLYCNFG_VAL 0x00010001 +#define CFG_SXCNFG_VAL 0x40044004 + +/* + * PCMCIA and CF Interfaces + */ +#define CFG_MECR_VAL 0x00000002 +#define CFG_MCMEM0_VAL 0x00004204 +#define CFG_MCMEM1_VAL 0x00000000 +#define CFG_MCATT0_VAL 0x00010504 +#define CFG_MCATT1_VAL 0x00000000 +#define CFG_MCIO0_VAL 0x00008407 +#define CFG_MCIO1_VAL 0x00000000 + +#define CONFIG_PXA_PCMCIA 1 +#define CONFIG_PXA_IDE 1 + +#define CONFIG_PCMCIA_SLOT_A 1 +/* just to keep build system happy */ + +#define CFG_PCMCIA_MEM_ADDR 0x28000000 +#define CFG_PCMCIA_MEM_SIZE 0x04000000 + + +#define CFG_IDE_MAXBUS 1 +/* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 +/* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR 0x20000000 + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET 0x1f0 + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET 0x1f0 + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET 0x3f0 + +/* + * FLASH and environment organization + */ + +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER 1 + +#define CFG_MONITOR_BASE 0 +#define CFG_MONITOR_LEN 0x20000 + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ + +/* write flash less slowly */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 + +/* Flash environment locations */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector */ +#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment */ +#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ + +#endif /* __CONFIG_H */