9
0
Fork 0

Initial revision

This commit is contained in:
wdenk 2002-08-26 21:53:16 +00:00
parent 5d3207da3a
commit 354bc6feac
2 changed files with 551 additions and 0 deletions

266
board/c2mon/c2mon.c Normal file
View File

@ -0,0 +1,266 @@
/*
* (C) Copyright 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc8xx.h>
/* ------------------------------------------------------------------------- */
static long int dram_size (long int, long int *, long int);
/* ------------------------------------------------------------------------- */
#define _NOT_USED_ 0xFFFFFFFF
const uint sdram_table[] =
{
/*
* Single Read. (Offset 0 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
0x1FF77C47, /* last */
/*
* SDRAM Initialization (offset 5 in UPMA RAM)
*
* This is no UPM entry point. The following definition uses
* the remaining space to establish an initialization
* sequence, which is executed by a RUN command.
*
*/
0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */
/*
* Burst Read. (Offset 8 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Single Write. (Offset 18 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Write. (Offset 20 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
_NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Refresh (Offset 30 in UPMA RAM)
*/
0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
0xFFFFFC84, 0xFFFFFC07, /* last */
_NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Exception. (Offset 3c in UPMA RAM)
*/
0x7FFFFC07, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
};
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*/
int checkboard (void)
{
unsigned char *s = getenv ("serial#");
puts ("Board: TTTech C2MON ");
for (; s && *s; ++s) {
if (*s == ' ')
break;
putc (*s);
}
putc ('\n');
return (0);
}
/* ------------------------------------------------------------------------- */
long int initdram (int board_type)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
unsigned long reg;
long int size8, size9;
long int size = 0;
upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table) / sizeof(uint));
/*
* Preliminary prescaler for refresh (depends on number of
* banks): This value is selected for four cycles every 62.4 us
* with two SDRAM banks or four cycles every 31.2 us with one
* bank. It will be adjusted after memory sizing.
*/
memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
memctl->memc_mar = 0x00000088;
/*
* Map controller bank 2 the SDRAM bank 2 at physical address 0.
*/
memctl->memc_or2 = CFG_OR2_PRELIM;
memctl->memc_br2 = CFG_BR2_PRELIM;
memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
udelay (200);
/* perform SDRAM initializsation sequence */
memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */
udelay (1);
memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */
udelay (1);
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
udelay (1000);
/*
* Check Bank 0 Memory Size
*
* try 8 column mode
*/
size8 = dram_size (CFG_MAMR_8COL,
(ulong *)SDRAM_BASE2_PRELIM,
SDRAM_MAX_SIZE);
udelay (1000);
/*
* try 9 column mode
*/
size9 = dram_size (CFG_MAMR_9COL,
(ulong *) SDRAM_BASE2_PRELIM,
SDRAM_MAX_SIZE);
if (size8 < size9) { /* leave configuration at 9 columns */
size = size9;
/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
} else { /* back to 8 columns */
size = size8;
memctl->memc_mamr = CFG_MAMR_8COL;
udelay (500);
/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
}
udelay (1000);
/*
* Adjust refresh rate depending on SDRAM type
* For types > 128 MBit leave it at the current (fast) rate
*/
if (size < 0x02000000) {
/* reduce to 15.6 us (62.4 us / quad) */
memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
udelay (1000);
}
/*
* Final mapping
*/
memctl->memc_or2 = ((-size) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
/*
* No bank 1
*
* invalidate bank
*/
memctl->memc_br3 = 0;
/* adjust refresh rate depending on SDRAM type, one bank */
reg = memctl->memc_mptpr;
reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
memctl->memc_mptpr = reg;
udelay (10000);
return (size);
}
/* ------------------------------------------------------------------------- */
/*
* Check memory range for valid RAM. A simple memory test determines
* the actually available RAM size between addresses `base' and
* `base + maxsize'. Some (not all) hardware errors are detected:
* - short between address lines
* - short between data lines
*/
static long int dram_size (long int mamr_value, long int *base,
long int maxsize)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
volatile long int *addr;
ulong cnt, val;
ulong save[32]; /* to make test non-destructive */
unsigned char i = 0;
memctl->memc_mamr = mamr_value;
for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
addr = base + cnt; /* pointer arith! */
save[i++] = *addr;
*addr = ~cnt;
}
/* write 0 to base address */
addr = base;
save[i] = *addr;
*addr = 0;
/* check at base address */
if ((val = *addr) != 0) {
*addr = save[i];
return (0);
}
for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
addr = base + cnt; /* pointer arith! */
val = *addr;
*addr = save[--i];
if (val != (~cnt)) {
return (cnt * sizeof (long));
}
}
return (maxsize);
}

285
board/cogent/mb.c Normal file
View File

@ -0,0 +1,285 @@
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <board/cogent/dipsw.h>
#include <board/cogent/lcd.h>
#include <board/cogent/rtc.h>
#include <board/cogent/par.h>
#include <board/cogent/pci.h>
/* ------------------------------------------------------------------------- */
#if defined(CONFIG_8260)
#include <ioports.h>
/*
* I/O Port configuration table
*
* if conf is 1, then that port pin will be configured at boot time
* according to the five values podr/pdir/ppar/psor/pdat for that entry
*/
const iop_conf_t iop_conf_tab[4][32] = {
/* Port A configuration */
{ /* conf ppar psor pdir podr pdat */
/* PA31 */ { 0, 0, 0, 0, 0, 0 },
/* PA30 */ { 0, 0, 0, 0, 0, 0 },
/* PA29 */ { 0, 0, 0, 0, 0, 0 },
/* PA28 */ { 0, 0, 0, 0, 0, 0 },
/* PA27 */ { 0, 0, 0, 0, 0, 0 },
/* PA26 */ { 0, 0, 0, 0, 0, 0 },
/* PA25 */ { 0, 0, 0, 0, 0, 0 },
/* PA24 */ { 0, 0, 0, 0, 0, 0 },
/* PA23 */ { 0, 0, 0, 0, 0, 0 },
/* PA22 */ { 0, 0, 0, 0, 0, 0 },
/* PA21 */ { 0, 0, 0, 0, 0, 0 },
/* PA20 */ { 0, 0, 0, 0, 0, 0 },
/* PA19 */ { 0, 0, 0, 0, 0, 0 },
/* PA18 */ { 0, 0, 0, 0, 0, 0 },
/* PA17 */ { 0, 0, 0, 0, 0, 0 },
/* PA16 */ { 0, 0, 0, 0, 0, 0 },
/* PA15 */ { 0, 0, 0, 0, 0, 0 },
/* PA14 */ { 0, 0, 0, 0, 0, 0 },
/* PA13 */ { 0, 0, 0, 0, 0, 0 },
/* PA12 */ { 0, 0, 0, 0, 0, 0 },
/* PA11 */ { 0, 0, 0, 0, 0, 0 },
/* PA10 */ { 0, 0, 0, 0, 0, 0 },
/* PA9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TXD */
/* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RXD */
/* PA7 */ { 0, 0, 0, 0, 0, 0 },
/* PA6 */ { 0, 0, 0, 0, 0, 0 },
/* PA5 */ { 0, 0, 0, 0, 0, 0 },
/* PA4 */ { 0, 0, 0, 0, 0, 0 },
/* PA3 */ { 0, 0, 0, 0, 0, 0 },
/* PA2 */ { 0, 0, 0, 0, 0, 0 },
/* PA1 */ { 0, 0, 0, 0, 0, 0 },
/* PA0 */ { 0, 0, 0, 0, 0, 0 }
},
{ /* conf ppar psor pdir podr pdat */
/* PB31 */ { 0, 0, 0, 0, 0, 0 },
/* PB30 */ { 0, 0, 0, 0, 0, 0 },
/* PB29 */ { 0, 0, 0, 0, 0, 0 },
/* PB28 */ { 0, 0, 0, 0, 0, 0 },
/* PB27 */ { 0, 0, 0, 0, 0, 0 },
/* PB26 */ { 0, 0, 0, 0, 0, 0 },
/* PB25 */ { 0, 0, 0, 0, 0, 0 },
/* PB24 */ { 0, 0, 0, 0, 0, 0 },
/* PB23 */ { 0, 0, 0, 0, 0, 0 },
/* PB22 */ { 0, 0, 0, 0, 0, 0 },
/* PB21 */ { 0, 0, 0, 0, 0, 0 },
/* PB20 */ { 0, 0, 0, 0, 0, 0 },
/* PB19 */ { 0, 0, 0, 0, 0, 0 },
/* PB18 */ { 0, 0, 0, 0, 0, 0 },
/* PB17 */ { 0, 0, 0, 0, 0, 0 },
/* PB16 */ { 0, 0, 0, 0, 0, 0 },
/* PB15 */ { 0, 0, 0, 0, 0, 0 },
/* PB14 */ { 0, 0, 0, 0, 0, 0 },
/* PB13 */ { 0, 0, 0, 0, 0, 0 },
/* PB12 */ { 0, 0, 0, 0, 0, 0 },
/* PB11 */ { 0, 0, 0, 0, 0, 0 },
/* PB10 */ { 0, 0, 0, 0, 0, 0 },
/* PB9 */ { 0, 0, 0, 0, 0, 0 },
/* PB8 */ { 0, 0, 0, 0, 0, 0 },
/* PB7 */ { 0, 0, 0, 0, 0, 0 },
/* PB6 */ { 0, 0, 0, 0, 0, 0 },
/* PB5 */ { 0, 0, 0, 0, 0, 0 },
/* PB4 */ { 0, 0, 0, 0, 0, 0 },
/* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
},
{ /* conf ppar psor pdir podr pdat */
/* PC31 */ { 0, 0, 0, 0, 0, 0 },
/* PC30 */ { 0, 0, 0, 0, 0, 0 },
/* PC29 */ { 0, 0, 0, 0, 0, 0 },
/* PC28 */ { 0, 0, 0, 0, 0, 0 },
/* PC27 */ { 0, 0, 0, 0, 0, 0 },
/* PC26 */ { 0, 0, 0, 0, 0, 0 },
/* PC25 */ { 0, 0, 0, 0, 0, 0 },
/* PC24 */ { 0, 0, 0, 0, 0, 0 },
/* PC23 */ { 0, 0, 0, 0, 0, 0 },
/* PC22 */ { 0, 0, 0, 0, 0, 0 },
/* PC21 */ { 0, 0, 0, 0, 0, 0 },
/* PC20 */ { 0, 0, 0, 0, 0, 0 },
/* PC19 */ { 0, 0, 0, 0, 0, 0 },
/* PC18 */ { 0, 0, 0, 0, 0, 0 },
/* PC17 */ { 0, 0, 0, 0, 0, 0 },
/* PC16 */ { 0, 0, 0, 0, 0, 0 },
/* PC15 */ { 0, 0, 0, 0, 0, 0 },
/* PC14 */ { 0, 0, 0, 0, 0, 0 },
/* PC13 */ { 0, 0, 0, 0, 0, 0 },
/* PC12 */ { 0, 0, 0, 0, 0, 0 },
/* PC11 */ { 0, 0, 0, 0, 0, 0 },
/* PC10 */ { 0, 0, 0, 0, 0, 0 },
/* PC9 */ { 0, 0, 0, 0, 0, 0 },
/* PC8 */ { 0, 0, 0, 0, 0, 0 },
/* PC7 */ { 0, 0, 0, 0, 0, 0 },
/* PC6 */ { 0, 0, 0, 0, 0, 0 },
/* PC5 */ { 0, 0, 0, 0, 0, 0 },
/* PC4 */ { 0, 0, 0, 0, 0, 0 },
/* PC3 */ { 0, 0, 0, 0, 0, 0 },
/* PC2 */ { 0, 0, 0, 0, 0, 0 },
/* PC1 */ { 0, 0, 0, 0, 0, 0 },
/* PC0 */ { 0, 0, 0, 0, 0, 0 }
},
{ /* conf ppar psor pdir podr pdat */
/* PD31 */ { 0, 0, 0, 0, 0, 0 },
/* PD30 */ { 0, 0, 0, 0, 0, 0 },
/* PD29 */ { 0, 0, 0, 0, 0, 0 },
/* PD28 */ { 0, 0, 0, 0, 0, 0 },
/* PD27 */ { 0, 0, 0, 0, 0, 0 },
/* PD26 */ { 0, 0, 0, 0, 0, 0 },
/* PD25 */ { 0, 0, 0, 0, 0, 0 },
/* PD24 */ { 0, 0, 0, 0, 0, 0 },
/* PD23 */ { 0, 0, 0, 0, 0, 0 },
/* PD22 */ { 0, 0, 0, 0, 0, 0 },
/* PD21 */ { 0, 0, 0, 0, 0, 0 },
/* PD20 */ { 0, 0, 0, 0, 0, 0 },
/* PD19 */ { 0, 0, 0, 0, 0, 0 },
/* PD18 */ { 0, 0, 0, 0, 0, 0 },
/* PD17 */ { 0, 0, 0, 0, 0, 0 },
/* PD16 */ { 0, 0, 0, 0, 0, 0 },
/* PD15 */ { 1, 1, 1, 0, 0, 0 }, /* I2C SDA */
/* PD14 */ { 1, 1, 1, 0, 0, 0 }, /* I2C SCL */
/* PD13 */ { 0, 0, 0, 0, 0, 0 },
/* PD12 */ { 0, 0, 0, 0, 0, 0 },
/* PD11 */ { 0, 0, 0, 0, 0, 0 },
/* PD10 */ { 0, 0, 0, 0, 0, 0 },
/* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
/* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
/* PD7 */ { 0, 0, 0, 0, 0, 0 },
/* PD6 */ { 0, 0, 0, 0, 0, 0 },
/* PD5 */ { 0, 0, 0, 0, 0, 0 },
/* PD4 */ { 0, 0, 0, 0, 0, 0 },
/* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
}
};
#endif /* CONFIG_8260 */
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*/
int
checkboard(void)
{
puts ("Board: Cogent " COGENT_MOTHERBOARD " motherboard with a "
COGENT_CPU_MODULE " CPU Module\n");
return (0);
}
/* ------------------------------------------------------------------------- */
/*
* Miscelaneous platform dependent initialisations while still
* running in flash
*/
int misc_init_f (void)
{
printf ("DIPSW: ");
dipsw_init();
return (0);
}
/* ------------------------------------------------------------------------- */
long int
initdram(int board_type)
{
#if CONFIG_CMA111
return (32L * 1024L * 1024L);
#else
unsigned char dipsw_val;
int dual, size0, size1;
long int memsize;
dipsw_val = dipsw_cooked();
dual = dipsw_val & 0x01;
size0 = (dipsw_val & 0x08) >> 3;
size1 = (dipsw_val & 0x04) >> 2;
if (size0)
if (size1)
memsize = 16L * 1024L * 1024L;
else
memsize = 1L * 1024L * 1024L;
else
if (size1)
memsize = 4L * 1024L * 1024L;
else {
printf("[Illegal dip switch settings - assuming 16Mbyte SIMMs] ");
memsize = 16L * 1024L * 1024L; /* shouldn't happen - guess 16M */
}
if (dual)
memsize *= 2L;
return (memsize);
#endif
}
/* ------------------------------------------------------------------------- */
/*
* Miscelaneous platform dependent initialisations after monitor
* has been relocated into ram
*/
int misc_init_r (void)
{
printf ("LCD: ");
lcd_init();
#if 0
printf ("RTC: ");
rtc_init();
printf ("PAR: ");
par_init();
printf ("KBM: ");
kbm_init();
printf ("PCI: ");
pci_init();
#endif
return (0);
}