Coding style cleanup
This commit is contained in:
Wolfgang Denk
parent
6bdf430660
commit
3d078ce6d7
|
|
@ -2,6 +2,8 @@
|
|||
Changes for U-Boot 1.1.4:
|
||||
======================================================================
|
||||
|
||||
* Coding style cleanup
|
||||
|
||||
* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
|
||||
Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
|
||||
|
||||
|
|
|
|||
|
|
@ -278,8 +278,8 @@ Yusdi Santoso <yusdi_santoso@adaptec.com>
|
|||
|
||||
Travis Sawyer (travis.sawyer@sandburst.com>
|
||||
|
||||
KAREF PPC440GX
|
||||
METROBOX PPC440GX
|
||||
KAREF PPC440GX
|
||||
METROBOX PPC440GX
|
||||
XPEDITE1K PPC440GX
|
||||
|
||||
Peter De Schrijver <p2@mind.be>
|
||||
|
|
|
|||
18
MAKEALL
18
MAKEALL
|
|
@ -60,17 +60,17 @@ LIST_8xx=" \
|
|||
#########################################################################
|
||||
|
||||
LIST_4xx=" \
|
||||
ADCIOP AR405 ASH405 bubinga \
|
||||
ADCIOP AR405 ASH405 bubinga \
|
||||
CANBT CPCI405 CPCI4052 CPCI405AB \
|
||||
CPCI440 CPCIISER4 CRAYL1 csb272 \
|
||||
csb472 DASA_SIM DP405 DU405 \
|
||||
ebony ERIC EXBITGEN HUB405 \
|
||||
JSE KAREF METROBOX MIP405 \
|
||||
MIP405T ML2 ml300 ocotea \
|
||||
OCRTC ORSG PCI405 PIP405 \
|
||||
PLU405 PMC405 PPChameleonEVB VOH405 \
|
||||
W7OLMC W7OLMG walnut WUH405 \
|
||||
XPEDITE1K yellowstone yosemite \
|
||||
JSE KAREF METROBOX MIP405 \
|
||||
MIP405T ML2 ml300 ocotea \
|
||||
OCRTC ORSG PCI405 PIP405 \
|
||||
PLU405 PMC405 PPChameleonEVB VOH405 \
|
||||
W7OLMC W7OLMG walnut WUH405 \
|
||||
XPEDITE1K yellowstone yosemite \
|
||||
"
|
||||
|
||||
#########################################################################
|
||||
|
|
@ -90,7 +90,7 @@ LIST_824x=" \
|
|||
debris eXalion HIDDEN_DRAGON MOUSSE \
|
||||
MUSENKI MVBLUE OXC PN62 \
|
||||
Sandpoint8240 Sandpoint8245 SL8245 utx8245 \
|
||||
sbc8240 \
|
||||
sbc8240 \
|
||||
"
|
||||
|
||||
#########################################################################
|
||||
|
|
@ -164,7 +164,7 @@ LIST_ARM7="B2 ep7312 evb4510 impa7 modnet50"
|
|||
#########################################################################
|
||||
|
||||
LIST_ARM9=" \
|
||||
at91rm9200dk cmc_pu2 integratorcp integratorap \
|
||||
at91rm9200dk cmc_pu2 integratorcp integratorap \
|
||||
lpd7a400 mx1ads mx1fs2 omap1510inn \
|
||||
omap1610h2 omap1610inn omap730p2 scb9328 \
|
||||
smdk2400 smdk2410 trab VCMA9 \
|
||||
|
|
|
|||
|
|
@ -39,8 +39,6 @@
|
|||
|
||||
#ifdef CONFIG_I2C_BUS1
|
||||
|
||||
|
||||
|
||||
#define IIC_OK 0
|
||||
#define IIC_NOK 1
|
||||
#define IIC_NOK_LA 2 /* Lost arbitration */
|
||||
|
|
@ -511,5 +509,4 @@ U_BOOT_CMD(
|
|||
"\n -discover valid I2C chip addresses\n"
|
||||
);
|
||||
|
||||
#endif
|
||||
|
||||
#endif /* CONFIG_I2C_BUS1 */
|
||||
|
|
|
|||
|
|
@ -34,11 +34,8 @@
|
|||
#endif
|
||||
#include <i2c.h>
|
||||
|
||||
|
||||
#ifdef CONFIG_HARD_I2C
|
||||
|
||||
|
||||
|
||||
#define I2C_BUS1_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000500)
|
||||
#define I2C_REGISTERS_BUS1_BASE_ADDRESS I2C_BUS1_BASE_ADDR
|
||||
#define IIC_MDBUF1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICMDBUF)
|
||||
|
|
@ -64,4 +61,4 @@ int i2c_write1 (uchar chip, uint addr, int alen, uchar * buffer, int len);
|
|||
uchar i2c_reg_read1(uchar i2c_addr, uchar reg);
|
||||
void i2c_reg_write1(uchar i2c_addr, uchar reg, uchar val);
|
||||
|
||||
#endif
|
||||
#endif /* CONFIG_HARD_I2C */
|
||||
|
|
|
|||
|
|
@ -34,7 +34,7 @@ long int fixed_sdram (void);
|
|||
/*************************************************************************
|
||||
* metrobox_get_master
|
||||
*
|
||||
* PRI_N - active low signal. If the GPIO pin is low we are the master
|
||||
* PRI_N - active low signal. If the GPIO pin is low we are the master
|
||||
*
|
||||
************************************************************************/
|
||||
int sbcommon_get_master(void)
|
||||
|
|
@ -81,7 +81,7 @@ unsigned short sbcommon_get_serial_number(void)
|
|||
unsigned short sernum;
|
||||
|
||||
/* Get the board serial number from eeprom */
|
||||
/* Initialize I2C */
|
||||
/* Initialize I2C */
|
||||
i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
|
||||
|
||||
/* Read 256 bytes in EEPROM */
|
||||
|
|
@ -96,7 +96,7 @@ unsigned short sbcommon_get_serial_number(void)
|
|||
/*************************************************************************
|
||||
* sbcommon_fans
|
||||
*
|
||||
* Spin up fans 2 & 3 to get some air moving. OS will take care
|
||||
* Spin up fans 2 & 3 to get some air moving. OS will take care
|
||||
* of the rest. This is mostly a precaution...
|
||||
*
|
||||
* Assumes i2c bus 1 is ready.
|
||||
|
|
@ -253,8 +253,8 @@ int testdram (void)
|
|||
/*************************************************************************
|
||||
* fixed sdram init -- doesn't use serial presence detect.
|
||||
*
|
||||
* Assumes: 128 MB, non-ECC, non-registered
|
||||
* PLB @ 133 MHz
|
||||
* Assumes: 128 MB, non-ECC, non-registered
|
||||
* PLB @ 133 MHz
|
||||
*
|
||||
************************************************************************/
|
||||
long int fixed_sdram (void)
|
||||
|
|
@ -264,11 +264,11 @@ long int fixed_sdram (void)
|
|||
/*--------------------------------------------------------------------
|
||||
* Setup some default
|
||||
*------------------------------------------------------------------*/
|
||||
mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */
|
||||
mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
|
||||
mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
|
||||
mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
|
||||
mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
|
||||
mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */
|
||||
mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
|
||||
mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
|
||||
mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
|
||||
mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
|
||||
|
||||
/*--------------------------------------------------------------------
|
||||
* Setup for board-specific specific mem
|
||||
|
|
@ -276,25 +276,25 @@ long int fixed_sdram (void)
|
|||
/*
|
||||
* Following for CAS Latency = 2.5 @ 133 MHz PLB
|
||||
*/
|
||||
mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
|
||||
mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
|
||||
/* RA=10 RD=3 */
|
||||
mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
|
||||
mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
|
||||
/* RA=10 RD=3 */
|
||||
mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
|
||||
mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
|
||||
mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
|
||||
udelay (400); /* Delay 200 usecs (min) */
|
||||
mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
|
||||
mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
|
||||
udelay (400); /* Delay 200 usecs (min) */
|
||||
|
||||
/*--------------------------------------------------------------------
|
||||
* Enable the controller, then wait for DCEN to complete
|
||||
*------------------------------------------------------------------*/
|
||||
mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
|
||||
mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
|
||||
for (;;) {
|
||||
mfsdram (mem_mcsts, reg);
|
||||
if (reg & 0x80000000)
|
||||
break;
|
||||
}
|
||||
|
||||
return (128 * 1024 * 1024); /* 128 MB */
|
||||
return (128 * 1024 * 1024); /* 128 MB */
|
||||
}
|
||||
#endif /* !defined(CONFIG_SPD_EEPROM) */
|
||||
|
||||
|
|
|
|||
|
|
@ -30,38 +30,35 @@
|
|||
#include <i2c.h>
|
||||
#include "ppc440gx_i2c.h"
|
||||
|
||||
|
||||
|
||||
|
||||
/*
|
||||
* GPIO Settings
|
||||
*/
|
||||
/* Chassis settings */
|
||||
#define SBCOMMON_GPIO_PRI_N 0x00001000 /* 0 = Chassis Master, 1 = Slave */
|
||||
#define SBCOMMON_GPIO_SEC_PRES 0x00000800 /* 1 = Other board present */
|
||||
#define SBCOMMON_GPIO_PRI_N 0x00001000 /* 0 = Chassis Master, 1 = Slave */
|
||||
#define SBCOMMON_GPIO_SEC_PRES 0x00000800 /* 1 = Other board present */
|
||||
|
||||
/* Debug LEDs */
|
||||
#define SBCOMMON_GPIO_DBGLED_0 0x00000400
|
||||
#define SBCOMMON_GPIO_DBGLED_1 0x00000200
|
||||
#define SBCOMMON_GPIO_DBGLED_2 0x00100000
|
||||
#define SBCOMMON_GPIO_DBGLED_3 0x00000100
|
||||
#define SBCOMMON_GPIO_DBGLED_0 0x00000400
|
||||
#define SBCOMMON_GPIO_DBGLED_1 0x00000200
|
||||
#define SBCOMMON_GPIO_DBGLED_2 0x00100000
|
||||
#define SBCOMMON_GPIO_DBGLED_3 0x00000100
|
||||
|
||||
#define SBCOMMON_GPIO_DBGLEDS (SBCOMMON_GPIO_DBGLED_0 | \
|
||||
SBCOMMON_GPIO_DBGLED_1 | \
|
||||
SBCOMMON_GPIO_DBGLED_2 | \
|
||||
SBCOMMON_GPIO_DBGLED_3)
|
||||
#define SBCOMMON_GPIO_DBGLEDS (SBCOMMON_GPIO_DBGLED_0 | \
|
||||
SBCOMMON_GPIO_DBGLED_1 | \
|
||||
SBCOMMON_GPIO_DBGLED_2 | \
|
||||
SBCOMMON_GPIO_DBGLED_3)
|
||||
|
||||
#define SBCOMMON_GPIO_SYS_FAULT 0x00000080
|
||||
#define SBCOMMON_GPIO_SYS_OTEMP 0x00000040
|
||||
#define SBCOMMON_GPIO_SYS_STATUS 0x00000020
|
||||
#define SBCOMMON_GPIO_SYS_FAULT 0x00000080
|
||||
#define SBCOMMON_GPIO_SYS_OTEMP 0x00000040
|
||||
#define SBCOMMON_GPIO_SYS_STATUS 0x00000020
|
||||
|
||||
#define SBCOMMON_GPIO_SYS_LEDS (SBCOMMON_GPIO_SYS_STATUS)
|
||||
#define SBCOMMON_GPIO_SYS_LEDS (SBCOMMON_GPIO_SYS_STATUS)
|
||||
|
||||
#define SBCOMMON_GPIO_LEDS (SBCOMMON_GPIO_DBGLED_0 | \
|
||||
SBCOMMON_GPIO_DBGLED_1 | \
|
||||
SBCOMMON_GPIO_DBGLED_2 | \
|
||||
SBCOMMON_GPIO_DBGLED_3 | \
|
||||
SBCOMMON_GPIO_SYS_STATUS)
|
||||
#define SBCOMMON_GPIO_LEDS (SBCOMMON_GPIO_DBGLED_0 | \
|
||||
SBCOMMON_GPIO_DBGLED_1 | \
|
||||
SBCOMMON_GPIO_DBGLED_2 | \
|
||||
SBCOMMON_GPIO_DBGLED_3 | \
|
||||
SBCOMMON_GPIO_SYS_STATUS)
|
||||
|
||||
typedef struct ppc440_gpio_regs {
|
||||
volatile unsigned long out;
|
||||
|
|
@ -71,13 +68,9 @@ typedef struct ppc440_gpio_regs {
|
|||
volatile unsigned long in;
|
||||
} __attribute__((packed)) ppc440_gpio_regs_t;
|
||||
|
||||
|
||||
|
||||
|
||||
int sbcommon_get_master(void);
|
||||
int sbcommon_secondary_present(void);
|
||||
unsigned short sbcommon_get_serial_number(void);
|
||||
void sbcommon_fans(void);
|
||||
|
||||
|
||||
#endif /* __SBCOMMON_H__ */
|
||||
|
|
|
|||
|
|
@ -33,8 +33,6 @@
|
|||
#include "../common/sb_common.h"
|
||||
#include "../common/ppc440gx_i2c.h"
|
||||
|
||||
|
||||
|
||||
void fpga_init (void);
|
||||
|
||||
KAREF_BOARD_ID_ST board_id_as[] =
|
||||
|
|
@ -53,13 +51,11 @@ KAREF_BOARD_ID_ST ofem_board_id_as[] =
|
|||
{"Reserved"},
|
||||
};
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
* board_early_init_f
|
||||
*
|
||||
* Setup chip selects, initialize the Opto-FPGA, initialize
|
||||
* interrupt polarity and triggers.
|
||||
*
|
||||
************************************************************************/
|
||||
int board_early_init_f (void)
|
||||
{
|
||||
|
|
@ -196,7 +192,6 @@ int board_early_init_f (void)
|
|||
mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48500000) |
|
||||
EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
|
||||
|
||||
|
||||
/*--------------------------------------------------------------------+
|
||||
* Setup the interrupt controller polarities, triggers, etc.
|
||||
+-------------------------------------------------------------------*/
|
||||
|
|
@ -241,7 +236,6 @@ int board_early_init_f (void)
|
|||
* checkboard
|
||||
*
|
||||
* Dump pertinent info to the console
|
||||
*
|
||||
************************************************************************/
|
||||
int checkboard (void)
|
||||
{
|
||||
|
|
@ -326,12 +320,10 @@ int checkboard (void)
|
|||
return (0);
|
||||
}
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
* misc_init_f
|
||||
*
|
||||
* Initialize I2C bus one to gain access to the fans
|
||||
*
|
||||
************************************************************************/
|
||||
int misc_init_f (void)
|
||||
{
|
||||
|
|
@ -345,11 +337,11 @@ int misc_init_f (void)
|
|||
|
||||
return (0);
|
||||
}
|
||||
|
||||
/*************************************************************************
|
||||
* misc_init_r
|
||||
*
|
||||
* Do nothing.
|
||||
*
|
||||
************************************************************************/
|
||||
int misc_init_r (void)
|
||||
{
|
||||
|
|
@ -409,20 +401,11 @@ int misc_init_r (void)
|
|||
printf("fakeled is set. use 'setenv fakeled ; setenv bootdelay 5 ; saveenv' to recover\n");
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
* ide_set_reset
|
||||
*
|
||||
*
|
||||
*
|
||||
************************************************************************/
|
||||
#ifdef CONFIG_IDE_RESET
|
||||
void ide_set_reset(int on)
|
||||
|
|
@ -441,9 +424,6 @@ void ide_set_reset(int on)
|
|||
|
||||
/*************************************************************************
|
||||
* fpga_init
|
||||
*
|
||||
*
|
||||
*
|
||||
************************************************************************/
|
||||
void fpga_init(void)
|
||||
{
|
||||
|
|
@ -498,8 +478,6 @@ void fpga_init(void)
|
|||
return;
|
||||
}
|
||||
|
||||
|
||||
|
||||
int karefSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
||||
{
|
||||
unsigned short sernum;
|
||||
|
|
@ -560,7 +538,6 @@ int karefSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
|||
return(1);
|
||||
}
|
||||
|
||||
|
||||
int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
||||
{
|
||||
unsigned short sernum;
|
||||
|
|
@ -593,15 +570,8 @@ int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
|||
return(1);
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
U_BOOT_CMD(kasetup, 1, 1, karefSetupVars,
|
||||
"kasetup - Set environment to factory defaults\n", NULL);
|
||||
|
||||
U_BOOT_CMD(karecover, 1, 1, karefRecover,
|
||||
"karecover - Set environment to allow for fs recovery\n", NULL);
|
||||
|
||||
|
|
|
|||
|
|
@ -32,8 +32,6 @@
|
|||
#include "../common/ppc440gx_i2c.h"
|
||||
#include "../common/sb_common.h"
|
||||
|
||||
|
||||
|
||||
void fpga_init (void);
|
||||
|
||||
METROBOX_BOARD_ID_ST board_id_as[] =
|
||||
|
|
@ -43,13 +41,11 @@ METROBOX_BOARD_ID_ST board_id_as[] =
|
|||
{"Reserved"}, /* Reserved for future use */
|
||||
};
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
* board_early_init_f
|
||||
*
|
||||
* Setup chip selects, initialize the Opto-FPGA, initialize
|
||||
* interrupt polarity and triggers.
|
||||
*
|
||||
************************************************************************/
|
||||
int board_early_init_f (void)
|
||||
{
|
||||
|
|
@ -186,7 +182,6 @@ int board_early_init_f (void)
|
|||
mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48500000) |
|
||||
EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
|
||||
|
||||
|
||||
/*--------------------------------------------------------------------+
|
||||
* Setup the interrupt controller polarities, triggers, etc.
|
||||
+-------------------------------------------------------------------*/
|
||||
|
|
@ -226,12 +221,10 @@ int board_early_init_f (void)
|
|||
return 0;
|
||||
}
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
* checkboard
|
||||
*
|
||||
* Dump pertinent info to the console
|
||||
*
|
||||
************************************************************************/
|
||||
int checkboard (void)
|
||||
{
|
||||
|
|
@ -295,12 +288,10 @@ int checkboard (void)
|
|||
return (0);
|
||||
}
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
* misc_init_f
|
||||
*
|
||||
* Initialize I2C bus one to gain access to the fans
|
||||
*
|
||||
************************************************************************/
|
||||
int misc_init_f (void)
|
||||
{
|
||||
|
|
@ -314,11 +305,11 @@ int misc_init_f (void)
|
|||
|
||||
return (0);
|
||||
}
|
||||
|
||||
/*************************************************************************
|
||||
* misc_init_r
|
||||
*
|
||||
* Do nothing.
|
||||
*
|
||||
************************************************************************/
|
||||
int misc_init_r (void)
|
||||
{
|
||||
|
|
@ -384,13 +375,8 @@ int misc_init_r (void)
|
|||
return (0);
|
||||
}
|
||||
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
* ide_set_reset
|
||||
*
|
||||
*
|
||||
*
|
||||
************************************************************************/
|
||||
#ifdef CONFIG_IDE_RESET
|
||||
void ide_set_reset(int on)
|
||||
|
|
@ -408,9 +394,6 @@ void ide_set_reset(int on)
|
|||
|
||||
/*************************************************************************
|
||||
* fpga_init
|
||||
*
|
||||
*
|
||||
*
|
||||
************************************************************************/
|
||||
void fpga_init(void)
|
||||
{
|
||||
|
|
@ -462,8 +445,6 @@ void fpga_init(void)
|
|||
return;
|
||||
}
|
||||
|
||||
|
||||
|
||||
int metroboxSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
||||
{
|
||||
unsigned short sernum;
|
||||
|
|
@ -524,7 +505,6 @@ int metroboxSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
|||
return(1);
|
||||
}
|
||||
|
||||
|
||||
int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
||||
{
|
||||
unsigned short sernum;
|
||||
|
|
@ -556,15 +536,8 @@ int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
|||
return(1);
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars,
|
||||
"mbsetup - Set environment to factory defaults\n", NULL);
|
||||
|
||||
U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover,
|
||||
"mbrecover - Set environment to allow for fs recovery\n", NULL);
|
||||
|
||||
|
|
|
|||
|
|
@ -30,19 +30,16 @@ typedef struct metrobox_board_id_s {
|
|||
|
||||
/* Metrobox Opto-FPGA registers and definitions */
|
||||
#include "hal_xc_auto.h"
|
||||
typedef struct opto_fpga_regs_s
|
||||
{
|
||||
volatile unsigned long revision_ul; /* Read Only */
|
||||
volatile unsigned long reset_ul; /* Read/Write */
|
||||
volatile unsigned long status_ul; /* Read Only */
|
||||
volatile unsigned long interrupt_ul; /* Read Only */
|
||||
volatile unsigned long mask_ul; /* Read/Write */
|
||||
volatile unsigned long scratch_ul; /* Read/Write */
|
||||
volatile unsigned long scrmask_ul; /* Read/Write */
|
||||
volatile unsigned long control_ul; /* Read/Write */
|
||||
volatile unsigned long boardinfo_ul; /* Read Only */
|
||||
} OPTO_FPGA_REGS_ST __attribute__((packed)), *OPTO_FPGA_REGS_PST;
|
||||
|
||||
|
||||
typedef struct opto_fpga_regs_s {
|
||||
volatile unsigned long revision_ul; /* Read Only */
|
||||
volatile unsigned long reset_ul; /* Read/Write */
|
||||
volatile unsigned long status_ul; /* Read Only */
|
||||
volatile unsigned long interrupt_ul; /* Read Only */
|
||||
volatile unsigned long mask_ul; /* Read/Write */
|
||||
volatile unsigned long scratch_ul; /* Read/Write */
|
||||
volatile unsigned long scrmask_ul; /* Read/Write */
|
||||
volatile unsigned long control_ul; /* Read/Write */
|
||||
volatile unsigned long boardinfo_ul; /* Read Only */
|
||||
} OPTO_FPGA_REGS_ST __attribute__ ((packed)), *OPTO_FPGA_REGS_PST;
|
||||
|
||||
#endif /* __METROBOX_H__ */
|
||||
|
|
|
|||
|
|
@ -22,7 +22,7 @@
|
|||
|
||||
/************************************************************************
|
||||
* KAMINOREFDES.h - configuration for the Sandburst Kamino Reference
|
||||
* design.
|
||||
* design.
|
||||
***********************************************************************/
|
||||
|
||||
/*
|
||||
|
|
@ -36,14 +36,14 @@
|
|||
/*-----------------------------------------------------------------------
|
||||
* High Level Configuration Options
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_KAREF 1 /* Board is Kamino Ref Variant */
|
||||
#define CONFIG_440GX 1 /* Specifc GX support */
|
||||
#define CONFIG_4xx 1 /* ... PPC4xx family */
|
||||
#define CONFIG_KAREF 1 /* Board is Kamino Ref Variant */
|
||||
#define CONFIG_440GX 1 /* Specifc GX support */
|
||||
#define CONFIG_4xx 1 /* ... PPC4xx family */
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
|
||||
#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */
|
||||
#define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */
|
||||
#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */
|
||||
#define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */
|
||||
#undef CFG_DRAM_TEST /* Disable-takes long time!*/
|
||||
#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
|
||||
#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
|
||||
|
||||
#define CONFIG_VERY_BIG_RAM 1
|
||||
#define CONFIG_VERSION_VARIABLE
|
||||
|
|
@ -54,13 +54,13 @@
|
|||
* Base addresses -- Note these are effective addresses where the
|
||||
* actual resources get mapped (not physical addresses)
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
|
||||
#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */
|
||||
#define CFG_MONITOR_BASE 0xfff80000 /* start of monitor */
|
||||
#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
|
||||
#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
|
||||
#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
|
||||
#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
|
||||
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
|
||||
#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */
|
||||
#define CFG_MONITOR_BASE 0xfff80000 /* start of monitor */
|
||||
#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
|
||||
#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
|
||||
#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
|
||||
#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
|
||||
|
||||
#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
|
||||
#define CFG_KAREF_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08200000)
|
||||
|
|
@ -69,23 +69,23 @@
|
|||
#define CFG_GPIO_BASE (CFG_PERIPHERAL_BASE + 0x00000700)
|
||||
|
||||
/* Here for completeness */
|
||||
#define CFG_OFEMAC_BASE (CFG_PERIPHERAL_BASE + 0x08600000)
|
||||
#define CFG_OFEMAC_BASE (CFG_PERIPHERAL_BASE + 0x08600000)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Initial RAM & stack pointer (placed in internal SRAM)
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_TEMP_STACK_OCM 1
|
||||
#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE
|
||||
#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
|
||||
#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
|
||||
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
|
||||
#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
|
||||
#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
|
||||
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
|
||||
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
|
||||
#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
|
||||
|
||||
#define CFG_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */
|
||||
#define CFG_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */
|
||||
#define CFG_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */
|
||||
#define CFG_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Serial Port
|
||||
|
|
@ -108,91 +108,91 @@
|
|||
*
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs*/
|
||||
#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */
|
||||
#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH related
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CFG_MAX_FLASH_SECT 8 /* sectors per device */
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CFG_MAX_FLASH_SECT 8 /* sectors per device */
|
||||
|
||||
#undef CFG_FLASH_CHECKSUM
|
||||
#define CFG_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */
|
||||
#define CFG_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* DDR SDRAM
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup*/
|
||||
#define SPD_EEPROM_ADDRESS {0x53} /* SPD i2c spd addresses */
|
||||
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup*/
|
||||
#define SPD_EEPROM_ADDRESS {0x53} /* SPD i2c spd addresses */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* I2C
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_HARD_I2C 1 /* I2C hardware support */
|
||||
#undef CONFIG_SOFT_I2C /* I2C !bit-banged */
|
||||
#define CFG_I2C_SPEED 400000 /* I2C speed 400kHz */
|
||||
#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
|
||||
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
|
||||
#define CONFIG_I2C_BUS1 1 /* Include i2c bus 1 supp */
|
||||
#define CONFIG_HARD_I2C 1 /* I2C hardware support */
|
||||
#undef CONFIG_SOFT_I2C /* I2C !bit-banged */
|
||||
#define CFG_I2C_SPEED 400000 /* I2C speed 400kHz */
|
||||
#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
|
||||
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
|
||||
#define CONFIG_I2C_BUS1 1 /* Include i2c bus 1 supp */
|
||||
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Environment
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */
|
||||
#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
|
||||
#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
|
||||
#define CONFIG_ENV_OVERWRITE 1 /* allow env overwrite */
|
||||
#define CFG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */
|
||||
#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
|
||||
#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
|
||||
#define CONFIG_ENV_OVERWRITE 1 /* allow env overwrite */
|
||||
|
||||
#define CFG_ENV_SIZE 0x1000 /* Size of Env vars */
|
||||
#define CFG_ENV_ADDR (CFG_NVRAM_BASE_ADDR)
|
||||
#define CFG_ENV_SIZE 0x1000 /* Size of Env vars */
|
||||
#define CFG_ENV_ADDR (CFG_NVRAM_BASE_ADDR)
|
||||
|
||||
#define CONFIG_BOOTDELAY 5 /* 5 second autoboot */
|
||||
#define CONFIG_BOOTDELAY 5 /* 5 second autoboot */
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial dnld */
|
||||
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial dnld */
|
||||
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Networking
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
|
||||
#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
|
||||
#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */
|
||||
#define CONFIG_PHY3_ADDR 0x18 /* PHY addr, LCL, EMAC3 */
|
||||
#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
|
||||
#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
|
||||
#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */
|
||||
#define CONFIG_PHY3_ADDR 0x18 /* PHY addr, LCL, EMAC3 */
|
||||
#define CONFIG_HAS_ETH0
|
||||
#define CONFIG_HAS_ETH1
|
||||
#define CONFIG_HAS_ETH2
|
||||
#define CONFIG_HAS_ETH3
|
||||
#define CONFIG_CIS8201_PHY 1 /* RGMII mode for Cicada */
|
||||
#define CONFIG_CIS8201_SHORT_ETCH 1 /* Use short etch mode */
|
||||
#define CONFIG_PHY_GIGE 1 /* GbE speed/duplex detect */
|
||||
#define CONFIG_CIS8201_PHY 1 /* RGMII mode for Cicada */
|
||||
#define CONFIG_CIS8201_SHORT_ETCH 1 /* Use short etch mode */
|
||||
#define CONFIG_PHY_GIGE 1 /* GbE speed/duplex detect */
|
||||
#define CONFIG_PHY_RESET_DELAY 1000
|
||||
#define CONFIG_NETMASK 255.255.0.0
|
||||
#define CONFIG_ETHADDR 00:00:00:00:00:00 /* No EMAC 0 support */
|
||||
#define CONFIG_ETH1ADDR 00:00:00:00:00:00 /* No EMAC 1 support */
|
||||
#define CFG_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */
|
||||
#define CONFIG_NETMASK 255.255.0.0
|
||||
#define CONFIG_ETHADDR 00:00:00:00:00:00 /* No EMAC 0 support */
|
||||
#define CONFIG_ETH1ADDR 00:00:00:00:00:00 /* No EMAC 1 support */
|
||||
#define CFG_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */
|
||||
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Console/Commands/Parser
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
|
||||
CFG_CMD_PCI | \
|
||||
CFG_CMD_IRQ | \
|
||||
CFG_CMD_I2C | \
|
||||
CFG_CMD_DHCP | \
|
||||
CFG_CMD_DATE | \
|
||||
CFG_CMD_BEDBUG | \
|
||||
CFG_CMD_PING | \
|
||||
CFG_CMD_DIAG | \
|
||||
CFG_CMD_MII | \
|
||||
CFG_CMD_NET | \
|
||||
CFG_CMD_ELF | \
|
||||
CFG_CMD_IDE | \
|
||||
CFG_CMD_FAT)
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
|
||||
CFG_CMD_PCI | \
|
||||
CFG_CMD_IRQ | \
|
||||
CFG_CMD_I2C | \
|
||||
CFG_CMD_DHCP | \
|
||||
CFG_CMD_DATE | \
|
||||
CFG_CMD_BEDBUG | \
|
||||
CFG_CMD_PING | \
|
||||
CFG_CMD_DIAG | \
|
||||
CFG_CMD_MII | \
|
||||
CFG_CMD_NET | \
|
||||
CFG_CMD_ELF | \
|
||||
CFG_CMD_IDE | \
|
||||
CFG_CMD_FAT)
|
||||
|
||||
/* Include NetConsole support */
|
||||
#define CONFIG_NETCONSOLE
|
||||
|
|
@ -200,16 +200,16 @@
|
|||
/* Include auto complete with tabs */
|
||||
#define CONFIG_AUTO_COMPLETE 1
|
||||
#define CFG_AUTO_COMPLETE 1
|
||||
#define CFG_ALT_MEMTEST 1 /* use real memory test */
|
||||
#define CFG_ALT_MEMTEST 1 /* use real memory test */
|
||||
|
||||
|
||||
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
||||
#include <cmd_confdefs.h>
|
||||
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_PROMPT "KaRefDes=> " /* Monitor Command Prompt */
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_PROMPT "KaRefDes=> " /* Monitor Command Prompt */
|
||||
|
||||
#define CFG_HUSH_PARSER 1 /* HUSH for ext'd cli */
|
||||
#define CFG_HUSH_PARSER 1 /* HUSH for ext'd cli */
|
||||
#define CFG_PROMPT_HUSH_PS2 "> "
|
||||
|
||||
|
||||
|
|
@ -217,20 +217,20 @@
|
|||
* Console Buffer
|
||||
*----------------------------------------------------------------------*/
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
|
||||
/* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of cmd args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Arg Buffer Size */
|
||||
/* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of cmd args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Arg Buffer Size */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Memory Test
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
|
||||
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
||||
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
|
||||
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Compact Flash (in true IDE mode)
|
||||
|
|
@ -238,7 +238,7 @@
|
|||
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
|
||||
#undef CONFIG_IDE_LED /* no led for ide supported */
|
||||
|
||||
#define CONFIG_IDE_RESET /* reset for ide supported */
|
||||
#define CONFIG_IDE_RESET /* reset for ide supported */
|
||||
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */
|
||||
#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
|
||||
|
||||
|
|
@ -248,25 +248,25 @@
|
|||
#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses*/
|
||||
#define CFG_ATA_ALT_OFFSET 0x100000 /* Offset for alternate registers */
|
||||
|
||||
#define CFG_ATA_STRIDE 2 /* Directly connected CF, needs a stride
|
||||
to get to the correct offset */
|
||||
#define CONFIG_DOS_PARTITION 1 /* Include dos partition */
|
||||
#define CFG_ATA_STRIDE 2 /* Directly connected CF, needs a stride
|
||||
to get to the correct offset */
|
||||
#define CONFIG_DOS_PARTITION 1 /* Include dos partition */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PCI
|
||||
*----------------------------------------------------------------------*/
|
||||
/* General PCI */
|
||||
#define CONFIG_PCI /* include pci support */
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
#define CONFIG_PCI_SCAN_SHOW /* show pci devices */
|
||||
#define CONFIG_PCI /* include pci support */
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
#define CONFIG_PCI_SCAN_SHOW /* show pci devices */
|
||||
#define CFG_PCI_TARGBASE (CFG_PCI_MEMBASE)
|
||||
|
||||
/* Board-specific PCI */
|
||||
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init*/
|
||||
#define CFG_PCI_TARGET_INIT /* let board init pci target*/
|
||||
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init*/
|
||||
#define CFG_PCI_TARGET_INIT /* let board init pci target*/
|
||||
|
||||
#define CFG_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */
|
||||
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
|
||||
#define CFG_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */
|
||||
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
|
|
@ -277,10 +277,10 @@
|
|||
/*-----------------------------------------------------------------------
|
||||
* Cache Configuration
|
||||
*/
|
||||
#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
|
||||
#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
|
||||
#define CFG_CACHELINE_SIZE 32
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */
|
||||
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */
|
||||
#endif
|
||||
|
||||
/*
|
||||
|
|
@ -288,22 +288,22 @@
|
|||
*
|
||||
* Boot Flags
|
||||
*/
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal PowerOn: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal PowerOn: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Miscellaneous configurable options
|
||||
*----------------------------------------------------------------------*/
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
#define CFG_LOAD_ADDR 0x8000000 /* default load address */
|
||||
#define CFG_EXTBDINFO 1 /* use extended board_info */
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
#define CFG_LOAD_ADDR 0x8000000 /* default load address */
|
||||
#define CFG_EXTBDINFO 1 /* use extended board_info */
|
||||
|
||||
#define CFG_HZ 100 /* decr freq: 1 ms ticks */
|
||||
#define CFG_HZ 100 /* decr freq: 1 ms ticks */
|
||||
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
|
|
|||
|
|
@ -65,32 +65,32 @@
|
|||
* Revision 1.10 2004/06/29 19:08:55 tsawyer
|
||||
* Add CONFIG_MISC_INIT_R
|
||||
*
|
||||
* Revision 1.9 2004/06/28 21:30:53 tsawyer
|
||||
* Revision 1.9 2004/06/28 21:30:53 tsawyer
|
||||
* Fix default BOOTARGS
|
||||
*
|
||||
* Revision 1.8 2004/06/17 15:51:08 tsawyer
|
||||
* Revision 1.8 2004/06/17 15:51:08 tsawyer
|
||||
* auto complete
|
||||
*
|
||||
* Revision 1.7 2004/06/17 15:08:49 tsawyer
|
||||
* Revision 1.7 2004/06/17 15:08:49 tsawyer
|
||||
* Add autocomplete
|
||||
*
|
||||
* Revision 1.6 2004/06/15 12:33:57 tsawyer
|
||||
* Revision 1.6 2004/06/15 12:33:57 tsawyer
|
||||
* debugging checkpoint
|
||||
*
|
||||
* Revision 1.5 2004/06/12 19:48:28 tsawyer
|
||||
* Revision 1.5 2004/06/12 19:48:28 tsawyer
|
||||
* Debugging checkpoint
|
||||
*
|
||||
* Revision 1.4 2004/06/02 13:03:06 tsawyer
|
||||
* Revision 1.4 2004/06/02 13:03:06 tsawyer
|
||||
* Fix eth addrs
|
||||
*
|
||||
* Revision 1.3 2004/05/18 19:56:10 tsawyer
|
||||
* Revision 1.3 2004/05/18 19:56:10 tsawyer
|
||||
* Change default bootcommand to pImage.metrobox
|
||||
*
|
||||
* Revision 1.2 2004/05/18 14:13:44 tsawyer
|
||||
* Revision 1.2 2004/05/18 14:13:44 tsawyer
|
||||
* Add bringup values for bootargs and bootcommand.
|
||||
* Remove definition of ipaddress and serverip addresses.
|
||||
*
|
||||
* Revision 1.1 2004/04/16 15:08:54 tsawyer
|
||||
* Revision 1.1 2004/04/16 15:08:54 tsawyer
|
||||
* Initial Revision
|
||||
*
|
||||
*
|
||||
|
|
@ -102,14 +102,14 @@
|
|||
/*-----------------------------------------------------------------------
|
||||
* High Level Configuration Options
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_METROBOX 1 /* Board is Metrobox */
|
||||
#define CONFIG_440GX 1 /* Specifc GX support */
|
||||
#define CONFIG_4xx 1 /* ... PPC4xx family */
|
||||
#define CONFIG_METROBOX 1 /* Board is Metrobox */
|
||||
#define CONFIG_440GX 1 /* Specifc GX support */
|
||||
#define CONFIG_4xx 1 /* ... PPC4xx family */
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
|
||||
#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */
|
||||
#define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */
|
||||
#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */
|
||||
#define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */
|
||||
#undef CFG_DRAM_TEST /* Disable-takes long time!*/
|
||||
#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
|
||||
#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
|
||||
|
||||
#define CONFIG_VERY_BIG_RAM 1
|
||||
#define CONFIG_VERSION_VARIABLE
|
||||
|
|
@ -120,13 +120,13 @@
|
|||
* Base addresses -- Note these are effective addresses where the
|
||||
* actual resources get mapped (not physical addresses)
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
|
||||
#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */
|
||||
#define CFG_MONITOR_BASE 0xfff80000 /* start of monitor */
|
||||
#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
|
||||
#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
|
||||
#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
|
||||
#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
|
||||
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
|
||||
#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */
|
||||
#define CFG_MONITOR_BASE 0xfff80000 /* start of monitor */
|
||||
#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
|
||||
#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
|
||||
#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
|
||||
#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
|
||||
|
||||
#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
|
||||
#define CFG_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08200000)
|
||||
|
|
@ -138,16 +138,16 @@
|
|||
*----------------------------------------------------------------------*/
|
||||
#define CFG_TEMP_STACK_OCM 1
|
||||
#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE
|
||||
#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
|
||||
#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
|
||||
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
|
||||
#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
|
||||
#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
|
||||
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
|
||||
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
|
||||
#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
|
||||
|
||||
#define CFG_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */
|
||||
#define CFG_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */
|
||||
#define CFG_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */
|
||||
#define CFG_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Serial Port
|
||||
|
|
@ -170,96 +170,96 @@
|
|||
*
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs*/
|
||||
#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */
|
||||
#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH related
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CFG_MAX_FLASH_SECT 8 /* sectors per device */
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CFG_MAX_FLASH_SECT 8 /* sectors per device */
|
||||
|
||||
#undef CFG_FLASH_CHECKSUM
|
||||
#define CFG_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */
|
||||
#define CFG_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* DDR SDRAM
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup*/
|
||||
#define SPD_EEPROM_ADDRESS {0x53} /* SPD i2c spd addresses */
|
||||
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup*/
|
||||
#define SPD_EEPROM_ADDRESS {0x53} /* SPD i2c spd addresses */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* I2C
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_HARD_I2C 1 /* I2C hardware support */
|
||||
#undef CONFIG_SOFT_I2C /* I2C !bit-banged */
|
||||
#define CFG_I2C_SPEED 400000 /* I2C speed 400kHz */
|
||||
#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
|
||||
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
|
||||
#define CONFIG_I2C_BUS1 1 /* Include i2c bus 1 supp */
|
||||
#define CONFIG_HARD_I2C 1 /* I2C hardware support */
|
||||
#undef CONFIG_SOFT_I2C /* I2C !bit-banged */
|
||||
#define CFG_I2C_SPEED 400000 /* I2C speed 400kHz */
|
||||
#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
|
||||
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
|
||||
#define CONFIG_I2C_BUS1 1 /* Include i2c bus 1 supp */
|
||||
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Environment
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */
|
||||
#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
|
||||
#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
|
||||
#define CONFIG_ENV_OVERWRITE 1 /* allow env overwrite */
|
||||
#define CFG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */
|
||||
#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
|
||||
#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
|
||||
#define CONFIG_ENV_OVERWRITE 1 /* allow env overwrite */
|
||||
|
||||
#define CFG_ENV_SIZE 0x1000 /* Size of Env vars */
|
||||
#define CFG_ENV_ADDR (CFG_NVRAM_BASE_ADDR)
|
||||
#define CFG_ENV_SIZE 0x1000 /* Size of Env vars */
|
||||
#define CFG_ENV_ADDR (CFG_NVRAM_BASE_ADDR)
|
||||
|
||||
#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/nfs rw nfsroot=$serverip:/home/metrobox0 nfsaddrs=$ipaddr:::::eth0:none "
|
||||
#define CONFIG_BOOTCOMMAND "tftp 8000000 pImage.metrobox;bootm 8000000"
|
||||
#define CONFIG_BOOTDELAY 5 /* disable autoboot */
|
||||
#define CONFIG_BOOTDELAY 5 /* disable autoboot */
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial dnld */
|
||||
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial dnld */
|
||||
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Networking
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
|
||||
#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
|
||||
#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */
|
||||
#define CONFIG_PHY3_ADDR 0x18 /* PHY addr, LCL, EMAC3 */
|
||||
#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
|
||||
#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
|
||||
#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */
|
||||
#define CONFIG_PHY3_ADDR 0x18 /* PHY addr, LCL, EMAC3 */
|
||||
#define CONFIG_HAS_ETH0
|
||||
#define CONFIG_HAS_ETH1
|
||||
#define CONFIG_HAS_ETH2
|
||||
#define CONFIG_HAS_ETH3
|
||||
#define CONFIG_CIS8201_PHY 1 /* RGMII mode for Cicada */
|
||||
#define CONFIG_CIS8201_SHORT_ETCH 1 /* Use short etch mode */
|
||||
#define CONFIG_PHY_GIGE 1 /* GbE speed/duplex detect */
|
||||
#define CONFIG_CIS8201_PHY 1 /* RGMII mode for Cicada */
|
||||
#define CONFIG_CIS8201_SHORT_ETCH 1 /* Use short etch mode */
|
||||
#define CONFIG_PHY_GIGE 1 /* GbE speed/duplex detect */
|
||||
#define CONFIG_PHY_RESET_DELAY 1000
|
||||
#define CONFIG_NETMASK 255.255.0.0
|
||||
#define CONFIG_ETHADDR 00:00:00:00:00:00 /* No EMAC 0 support */
|
||||
#define CONFIG_ETH1ADDR 00:00:00:00:00:00 /* No EMAC 1 support */
|
||||
#define CFG_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */
|
||||
#define CONFIG_NETMASK 255.255.0.0
|
||||
#define CONFIG_ETHADDR 00:00:00:00:00:00 /* No EMAC 0 support */
|
||||
#define CONFIG_ETH1ADDR 00:00:00:00:00:00 /* No EMAC 1 support */
|
||||
#define CFG_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */
|
||||
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Console/Commands/Parser
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
|
||||
CFG_CMD_PCI | \
|
||||
CFG_CMD_IRQ | \
|
||||
CFG_CMD_I2C | \
|
||||
CFG_CMD_DHCP | \
|
||||
CFG_CMD_DATE | \
|
||||
CFG_CMD_BEDBUG | \
|
||||
CFG_CMD_PING | \
|
||||
CFG_CMD_DIAG | \
|
||||
CFG_CMD_MII | \
|
||||
CFG_CMD_NET | \
|
||||
CFG_CMD_ELF | \
|
||||
CFG_CMD_IDE | \
|
||||
CFG_CMD_FAT)
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
|
||||
CFG_CMD_PCI | \
|
||||
CFG_CMD_IRQ | \
|
||||
CFG_CMD_I2C | \
|
||||
CFG_CMD_DHCP | \
|
||||
CFG_CMD_DATE | \
|
||||
CFG_CMD_BEDBUG | \
|
||||
CFG_CMD_PING | \
|
||||
CFG_CMD_DIAG | \
|
||||
CFG_CMD_MII | \
|
||||
CFG_CMD_NET | \
|
||||
CFG_CMD_ELF | \
|
||||
CFG_CMD_IDE | \
|
||||
CFG_CMD_FAT)
|
||||
|
||||
/* tbs 09-March-2005 Removed to be able to use 2nd serial */
|
||||
/* CFG_CMD_KGDB | \ */
|
||||
/* CFG_CMD_KGDB | \ */
|
||||
|
||||
|
||||
/* Include NetConsole support */
|
||||
|
|
@ -268,16 +268,16 @@
|
|||
/* Include auto complete with tabs */
|
||||
#define CONFIG_AUTO_COMPLETE 1
|
||||
#define CFG_AUTO_COMPLETE 1
|
||||
#define CFG_ALT_MEMTEST 1 /* use real memory test */
|
||||
#define CFG_ALT_MEMTEST 1 /* use real memory test */
|
||||
|
||||
|
||||
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
||||
#include <cmd_confdefs.h>
|
||||
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_PROMPT "MetroBox=> " /* Monitor Command Prompt */
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_PROMPT "MetroBox=> " /* Monitor Command Prompt */
|
||||
|
||||
#define CFG_HUSH_PARSER 1 /* HUSH for ext'd cli */
|
||||
#define CFG_HUSH_PARSER 1 /* HUSH for ext'd cli */
|
||||
#define CFG_PROMPT_HUSH_PS2 "> "
|
||||
|
||||
|
||||
|
|
@ -285,20 +285,20 @@
|
|||
* Console Buffer
|
||||
*----------------------------------------------------------------------*/
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
|
||||
/* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of cmd args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Arg Buffer Size */
|
||||
/* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of cmd args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Arg Buffer Size */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Memory Test
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
|
||||
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
||||
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
|
||||
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Compact Flash (in true IDE mode)
|
||||
|
|
@ -306,7 +306,7 @@
|
|||
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
|
||||
#undef CONFIG_IDE_LED /* no led for ide supported */
|
||||
|
||||
#define CONFIG_IDE_RESET /* reset for ide supported */
|
||||
#define CONFIG_IDE_RESET /* reset for ide supported */
|
||||
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */
|
||||
#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
|
||||
|
||||
|
|
@ -316,25 +316,25 @@
|
|||
#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses*/
|
||||
#define CFG_ATA_ALT_OFFSET 0x100000 /* Offset for alternate registers */
|
||||
|
||||
#define CFG_ATA_STRIDE 2 /* Directly connected CF, needs a stride
|
||||
to get to the correct offset */
|
||||
#define CONFIG_DOS_PARTITION 1 /* Include dos partition */
|
||||
#define CFG_ATA_STRIDE 2 /* Directly connected CF, needs a stride
|
||||
to get to the correct offset */
|
||||
#define CONFIG_DOS_PARTITION 1 /* Include dos partition */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PCI
|
||||
*----------------------------------------------------------------------*/
|
||||
/* General PCI */
|
||||
#define CONFIG_PCI /* include pci support */
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
#define CONFIG_PCI_SCAN_SHOW /* show pci devices */
|
||||
#define CONFIG_PCI /* include pci support */
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
#define CONFIG_PCI_SCAN_SHOW /* show pci devices */
|
||||
#define CFG_PCI_TARGBASE (CFG_PCI_MEMBASE)
|
||||
|
||||
/* Board-specific PCI */
|
||||
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init*/
|
||||
#define CFG_PCI_TARGET_INIT /* let board init pci target*/
|
||||
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init*/
|
||||
#define CFG_PCI_TARGET_INIT /* let board init pci target*/
|
||||
|
||||
#define CFG_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */
|
||||
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
|
||||
#define CFG_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */
|
||||
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
|
|
@ -345,10 +345,10 @@
|
|||
/*-----------------------------------------------------------------------
|
||||
* Cache Configuration
|
||||
*/
|
||||
#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
|
||||
#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
|
||||
#define CFG_CACHELINE_SIZE 32
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */
|
||||
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */
|
||||
#endif
|
||||
|
||||
/*
|
||||
|
|
@ -356,22 +356,22 @@
|
|||
*
|
||||
* Boot Flags
|
||||
*/
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal PowerOn: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal PowerOn: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Miscellaneous configurable options
|
||||
*----------------------------------------------------------------------*/
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
#define CFG_LOAD_ADDR 0x8000000 /* default load address */
|
||||
#define CFG_EXTBDINFO 1 /* use extended board_info */
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
#define CFG_LOAD_ADDR 0x8000000 /* default load address */
|
||||
#define CFG_EXTBDINFO 1 /* use extended board_info */
|
||||
|
||||
#define CFG_HZ 100 /* decr freq: 1 ms ticks */
|
||||
#define CFG_HZ 100 /* decr freq: 1 ms ticks */
|
||||
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
|
|
|||
Loading…
Reference in New Issue