sysmo-bts
/
barebox
9
0
Fork 0
Code Releases Activity

Merge with /home/wd/git/u-boot/master

This commit is contained in:
Wolfgang Denk 2005-08-12 23:55:10 +02:00
parent 2191923072 90e4e78365
commit 55d150d95d
89 changed files with 4134 additions and 3516 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

76
CHANGELOG
View File

@ -2,6 +2,78 @@
Changes for U-Boot 1.1.3:
======================================================================
* Minor code cleanup
* Add forgotten new fils from latest VoiceBlue update
* Make bootretry feature work with hush shell.
Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
Patch by Andreas Engel, 19 Jul 2005
* Update Hymod Board Database PHP code in "tools" directory
Patch by Murray Jensen, 01 Jul 2005
* Make "tr" command use POSIX compliant; export HOSTOS make variable
Patch by Murray Jensen, 30 Jun 2005
* Fix Murray Jensen's mail address.
Patch by Murray Jensen, 30 Jun 2005
* Preserve PHY_BMCR during a soft reset.
Patch by Carl Riechers, 24 Jun 2005
* VoiceBlue update: eeprom tool can also store firmware version now.
eeprom.bin is runable by jumping at load address.
Patch by Ladislav Michl, 23 May 2005
* Move the AT91RM9200DK to the ARM Systems list.
Patch by Anders Larsen, 26 Apr 2005
* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
Patch by Anders Larsen, 26 Apr 2005
* measure_gclk() is needed when DEBUG is enabled
Patch by Bryan O'Donoghue, 25 Apr 2005
* Add UPD-Checksum code, fix problem in net.c (return instead of break)
Patch by Reinhard Arlt, 12 Aug 2005
* esd PCI405 board updated
Patch by Matthias Fuchs, 28 Jul 2005
* esd WUH405 and DU405 board updated
Patch by Matthias Fuchs, 27 Jul 2005
* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
Patch by Matthias Fuchs, 4 May 2005
* Update AMCC Yosemite to get a consistent setup for all AMCC eval
boards (baudrate, environment...). Flash driver fixed.
Patch by Stefan Roese, 11 Aug 2005
* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
Patch by Stefan Roese, 11 Aug 2005
* Add NAND FLASH support for AMCC Bamboo 440EP eval board
Patch by Stefan Roese, 11 Aug 2005
* Add configuration for IFM AEV FIFO board.
Minor coding style cleanup.
* Add configuration for IFM SPI eval board
* Fix CompactFlash problem on HMI1001 board
* Make new "mtdparts" code build with older compilers
Patch by Andrea Scian, 09 Aug 2005
* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
with the 405 defines and the linux kernel defines.
Patch by Stefan Roese, 08 Aug 2005
* Fix compiler warnings with older GCC versions
* Add common (with Linux) MTD partition scheme and "mtdparts" command
Old, obsolete and duplicated code was cleaned up and replace by the
@ -34,13 +106,13 @@ Changes for U-Boot 1.1.3:
* Fix errors that occur when accessing SystemACE CF
Patch by Jeff Angielski, 09 Jan 2005
* Document switching between U-Boot and PlanetCore on RPXlite
by Sam Song, 24 Dec 2004
* Fix PowerQUICC II mask detection.
Patch by Eugene Surovegin, 20 Dec 2004
* Add support for Altera NIOS DK1C20 board
Patch by Shlomo Kut, 13 Dec 2004

3
CREDITS
View File

@ -198,10 +198,9 @@ D: Support for Samsung ARM920T S3C2400X, ARM920T "TRAB"
W: www.denx.de
N: Murray Jensen
E: Murray.Jensen@cmst.csiro.au
E: Murray.Jensen@csiro.au
D: Initial 8260 support; GDB support
D: Port to Cogent+Hymod boards; Hymod Board Database
W: http://www.msa.cmst.csiro.au/ourstaff/MurrayJensen/mjj.html
N: Yoo. Jonghoon
E: yooth@ipone.co.kr

10
MAINTAINERS
View File

@ -42,10 +42,6 @@ Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
sacsng MPC8260
Rick Bronson <rick@efn.org>
AT91RM9200DK at91rm9200
Oliver Brown <obrown@adventnetworks.com>
gw8260 MPC8260
@ -182,7 +178,7 @@ Klaus Heydeck <heydeck@kieback-peter.de>
KUP4K MPC855
KUP4X MPC859
Murray Jensen <Murray.Jensen@cmst.csiro.au>
Murray Jensen <Murray.Jensen@csiro.au>
cogent_mpc8xx MPC8xx
@ -352,6 +348,10 @@ Rishi Bhattacharya <rishi@ti.com>
omap5912osk ARM926EJS
Rick Bronson <rick@efn.org>
AT91RM9200DK at91rm9200
George G. Davis <gdavis@mvista.com>
assabet SA1100

12
Makefile
View File

@ -29,10 +29,10 @@ HOSTARCH := $(shell uname -m | \
-e s/powerpc/ppc/ \
-e s/macppc/ppc/)
HOSTOS := $(shell uname -s | tr A-Z a-z | \
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
sed -e 's/\(cygwin\).*/cygwin/')
export HOSTARCH
export HOSTARCH HOSTOS
# Deal with colliding definitions from tcsh etc.
VENDOR=
@ -231,6 +231,9 @@ PATI_config: unconfig
## MPC5xxx Systems
#########################################################################
aev_config: unconfig
@./mkconfig -a aev ppc mpc5xxx tqm5200
hmi1001_config: unconfig
@./mkconfig hmi1001 ppc mpc5xxx hmi1001
@ -354,6 +357,11 @@ MiniFAP_config: unconfig
}
@./mkconfig -a TQM5200 ppc mpc5xxx tqm5200
spieval_config: unconfig
echo "#define CONFIG_CS_AUTOCONF">>include/config.h
echo "... with automatic CS configuration"
@./mkconfig -a spieval ppc mpc5xxx tqm5200
#########################################################################
## MPC8xx Systems
#########################################################################

122
board/amcc/bamboo/bamboo.c
View File

@ -29,6 +29,7 @@
void ext_bus_cntlr_init(void);
void configure_ppc440ep_pins(void);
int is_nand_selected(void);
gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX];
#if 0
@ -132,10 +133,10 @@ gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX];
EBC0_BNCR_BW_8BIT
#define EBC0_BNCR_SMALL_FLASH_CS4 \
EBC0_BNCR_BAS_ENCODE(0x87800000) | \
EBC0_BNCR_BS_8MB | \
EBC0_BNCR_BAS_ENCODE(0x87F00000) | \
EBC0_BNCR_BS_1MB | \
EBC0_BNCR_BU_RW | \
EBC0_BNCR_BW_16BIT
EBC0_BNCR_BW_8BIT
/* Large Flash or SRAM */
#define EBC0_BNAP_LARGE_FLASH_OR_SRAM \
@ -273,6 +274,87 @@ int board_early_init_f(void)
return 0;
}
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#include <linux/mtd/nand.h>
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
/*----------------------------------------------------------------------------+
| nand_reset.
| Reset Nand flash
| This routine will abort previous cmd
+----------------------------------------------------------------------------*/
int nand_reset(ulong addr)
{
int wait=0, stat=0;
out8(addr + NAND_CMD_REG, NAND0_CMD_RESET);
out8(addr + NAND_CMD_REG, NAND0_CMD_READ_STATUS);
while ((stat != 0xc0) && (wait != 0xffff)) {
stat = in8(addr + NAND_DATA_REG);
wait++;
}
if (stat == 0xc0) {
return 0;
} else {
printf("NAND Reset timeout.\n");
return -1;
}
}
void board_nand_set_device(int cs, ulong addr)
{
/* Set NandFlash Core Configuration Register */
out32(addr + NAND_CCR_REG, 0x00001000 | (cs << 24));
switch (cs) {
case 1:
/* -------
* NAND0
* -------
* K9F1208U0A : 4 addr cyc, 1 col + 3 Row
* Set NDF1CR - Enable External CS1 in NAND FLASH controller
*/
out32(addr + NAND_CR1_REG, 0x80002222);
break;
case 2:
/* -------
* NAND1
* -------
* K9K2G0B : 5 addr cyc, 2 col + 3 Row
* Set NDF2CR : Enable External CS2 in NAND FLASH controller
*/
out32(addr + NAND_CR2_REG, 0xC0007777);
break;
}
/* Perform Reset Command */
if (nand_reset(addr) != 0)
return;
}
void nand_init(void)
{
board_nand_set_device(1, CFG_NAND_ADDR);
nand_probe(CFG_NAND_ADDR);
if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
print_size(nand_dev_desc[0].totlen, "\n");
}
#if 0 /* NAND1 not supported yet */
board_nand_set_device(2, CFG_NAND2_ADDR);
nand_probe(CFG_NAND2_ADDR);
if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
print_size(nand_dev_desc[0].totlen, "\n");
}
#endif
}
#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */
int checkboard(void)
{
sys_info_t sysinfo;
@ -585,7 +667,11 @@ int is_powerpc440ep_pass1(void)
+----------------------------------------------------------------------------*/
int is_nand_selected(void)
{
return FALSE; /* test-only */
#ifdef CONFIG_BAMBOO_NAND
return TRUE;
#else
return FALSE;
#endif
}
/*----------------------------------------------------------------------------+
@ -829,12 +915,8 @@ void ext_bus_cntlr_init(void)
/* NAND Flash */
ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH;
ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
/*ebc0_cs2_bnap_value = EBC0_BNAP_NAND_FLASH;
ebc0_cs2_bncr_value = EBC0_BNCR_NAND_FLASH_CS2;
ebc0_cs3_bnap_value = EBC0_BNAP_NAND_FLASH;
ebc0_cs3_bncr_value = EBC0_BNCR_NAND_FLASH_CS3;*/
ebc0_cs2_bnap_value = 0;
ebc0_cs2_bncr_value = 0;
ebc0_cs2_bnap_value = EBC0_BNAP_NAND_FLASH;
ebc0_cs2_bncr_value = EBC0_BNCR_NAND_FLASH_CS2;
ebc0_cs3_bnap_value = 0;
ebc0_cs3_bncr_value = 0;
} else {
@ -985,7 +1067,7 @@ void ext_bus_cntlr_init(void)
+----------------------------------------------------------------------------*/
uart_config_nb_t get_uart_configuration(void)
{
return (L4); /* test-only */
return (L4);
}
/*----------------------------------------------------------------------------+
@ -1132,8 +1214,7 @@ void ndfc_selection_in_fpga(void)
fpga_selection_1_reg = in8(FPGA_SELECTION_1_REG) &~FPGA_SEL_1_REG_NF_SELEC_MASK;
fpga_selection_1_reg |= FPGA_SEL_1_REG_NF0_SEL_BY_NFCS1;
/*fpga_selection_1_reg |= FPGA_SEL_1_REG_NF1_SEL_BY_NFCS2; */
/*fpga_selection_1_reg |= FPGA_SEL_1_REG_NF1_SEL_BY_NFCS3; */
fpga_selection_1_reg |= FPGA_SEL_1_REG_NF1_SEL_BY_NFCS2;
out8(FPGA_SELECTION_1_REG,fpga_selection_1_reg);
}
@ -1725,11 +1806,15 @@ void force_bup_core_selection(core_selection_t *core_select_P, config_validity_t
*(core_select_P+UIC_0_3) = CORE_SELECTED;
*(core_select_P+UIC_4_9) = CORE_SELECTED;
*(core_select_P+SCP_CORE) = CORE_SELECTED;
*(core_select_P+DMA_CHANNEL_CD) = CORE_SELECTED;
*(core_select_P+PACKET_REJ_FUNC_AVAIL) = CORE_SELECTED;
*(core_select_P+SCP_CORE) = CORE_SELECTED;
*(core_select_P+DMA_CHANNEL_CD) = CORE_SELECTED;
*(core_select_P+PACKET_REJ_FUNC_AVAIL) = CORE_SELECTED;
*(core_select_P+USB1_DEVICE) = CORE_SELECTED;
if (is_nand_selected()) {
*(core_select_P+NAND_FLASH) = CORE_SELECTED;
}
*config_val_P = CONFIG_IS_VALID;
}
@ -1901,9 +1986,8 @@ void configure_ppc440ep_pins(void)
SDR0_CUST0_NDFC_ENABLE |
SDR0_CUST0_NDFC_BW_8_BIT |
SDR0_CUST0_NDFC_ARE_MASK |
SDR0_CUST0_CHIPSELGAT_EN1 );
/*SDR0_CUST0_CHIPSELGAT_EN2 ); */
/*SDR0_CUST0_CHIPSELGAT_EN3 ); */
SDR0_CUST0_CHIPSELGAT_EN1 |
SDR0_CUST0_CHIPSELGAT_EN2);
ndfc_selection_in_fpga();
}

11
board/amcc/bamboo/flash.c
View File

@ -50,15 +50,16 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*
* Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0
*/
static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = {
{0x87800001, 0xFFF00000, 0xFFF80000}, /* 0:boot from small flash */
{0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66 */
{0x00000000, 0x00000000, 0x00000000}, /* 2:boot from nand flash */
{0x87800000, 0x87880000, 0xFF800001}, /* 3:boot from big flash 33*/
{0x87800000, 0x87880000, 0xFF800001}, /* 4:boot from big flash 66*/
{0x87F00000, 0x87F80000, 0xFFC00001}, /* 3:boot from big flash 33*/
{0x87F00000, 0x87F80000, 0xFFC00001}, /* 4:boot from big flash 66*/
{0x00000000, 0x00000000, 0x00000000}, /* 5:boot from */
{0x00000000, 0x00000000, 0x00000000}, /* 6:boot from pci 66 */
{0x00000000, 0x00000000, 0x00000000}, /* 7:boot from */
{0x87C00001, 0xFFF00000, 0xFFF80000}, /* 0:boot from small flash */
};
/*
@ -117,6 +118,10 @@ unsigned long flash_init(void)
index = 2;
break;
}
} else if (index == 0) {
if (in8(FPGA_SETTING_REG) & FPGA_SET_REG_OP_CODE_FLASH_ABOVE) {
index = 8; /* sram below op code flash -> new index 8 */
}
}
DEBUGF("\n");

24
board/amcc/bamboo/init.S
View File

@ -86,14 +86,20 @@
tlbtab:
tlbtab_start
/*
0xf0000000 must be first, before relocation SA_I must be off to use the
dcache as stack. It is patched after relocation to enable SA_I
*/
tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
tlbentry( CFG_PCI_BASE, SZ_256M, 0xE0000000, 0, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, 0x80000000, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
/*
* BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
* speed up boot process. It is patched after relocation to enable SA_I
*/
tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
tlbentry( CFG_NAND_ADDR, SZ_256M, CFG_NAND_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
/* PCI */
tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
@ -102,6 +108,6 @@ tlbtab:
tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
/* USB 2.0 Device */
tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_USB_DEVICE, SZ_1K, CFG_USB_DEVICE, 0, AC_R|AC_W|SA_G|SA_I )
tlbtab_end

1
board/amcc/yosemite/Makefile
View File

@ -26,7 +26,6 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o
OBJS += flash.o
SOBJS = init.o
$(LIB): $(OBJS) $(SOBJS)

571
board/amcc/yosemite/flash.c
View File

@ -1,571 +0,0 @@
/*
* (C) Copyright 2002-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
* Add support for Am29F016D and dynamic switch setting.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Modified 4/5/2001
* Wait for completion of each sector erase command issued
* 4/5/2001
* Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
*/
/*
* Ported to XPedite1000, 1/2 mb boot flash only
* Travis B. Sawyer, <travis.sawyer@sandburst.com>
*/
#include <common.h>
#include <ppc4xx.h>
#include <asm/processor.h>
#undef DEBUG
#ifdef DEBUG
#define DEBUGF(x...) printf(x)
#else
#define DEBUGF(x...)
#endif /* DEBUG */
#define BOOT_SMALL_FLASH 32 /* 00100000 */
#define FLASH_ONBD_N 2 /* 00000010 */
#define FLASH_SRAM_SEL 1 /* 00000001 */
#define BOOT_SMALL_FLASH_VAL 4
#define FLASH_ONBD_N_VAL 2
#define FLASH_SRAM_SEL_VAL 1
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
unsigned long flash_addr_table[512][CFG_MAX_FLASH_BANKS] = {
{0xfe000000}
};
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size(vu_long * addr, flash_info_t * info);
static int write_word(flash_info_t * info, ulong dest, ulong data);
#define ADDR0 0xaaaa
#define ADDR1 0x5554
#define FLASH_WORD_SIZE unsigned short
/*-----------------------------------------------------------------------
*/
unsigned long flash_init(void)
{
unsigned long total_b = 0;
unsigned long size_b[CFG_MAX_FLASH_BANKS];
unsigned short index = 0;
int i;
DEBUGF("\n");
DEBUGF("FLASH: Index: %d\n", index);
/* Init: no FLASHes known */
for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
/* check whether the address is 0 */
if (flash_addr_table[index][i] == 0) {
continue;
}
/* call flash_get_size() to initialize sector address */
size_b[i] = flash_get_size((vu_long *)
flash_addr_table[index][i],
&flash_info[i]);
flash_info[i].size = size_b[i];
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
printf
("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
i, size_b[i], size_b[i] << 20);
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
}
total_b += flash_info[i].size;
}
/* FLASH protect Monitor */
flash_protect(FLAG_PROTECT_SET,
CFG_MONITOR_BASE, 0xFFFFFFFF, &flash_info[0]);
return total_b;
}
/*-----------------------------------------------------------------------
*/
void flash_print_info(flash_info_t * info)
{
int i;
int k;
int size;
int erased;
volatile unsigned long *flash;
if (info->flash_id == FLASH_UNKNOWN) {
printf("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_AMD:
printf("AMD ");
break;
case FLASH_MAN_FUJ:
printf("FUJITSU ");
break;
case FLASH_MAN_SST:
printf("SST ");
break;
default:
printf("Unknown Vendor ");
break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_AMD016:
printf("AM29F016D (16 Mbit, uniform sector size)\n");
break;
case FLASH_AM040:
printf("AM29F040 (512 Kbit, uniform sector size)\n");
break;
case FLASH_AM400B:
printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
break;
case FLASH_AM400T:
printf("AM29LV400T (4 Mbit, top boot sector)\n");
break;
case FLASH_AM800B:
printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
break;
case FLASH_AM800T:
printf("AM29LV800T (8 Mbit, top boot sector)\n");
break;
case FLASH_AM160B:
printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
break;
case FLASH_AM160T:
printf("AM29LV160T (16 Mbit, top boot sector)\n");
break;
case FLASH_AM320B:
printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
break;
case FLASH_AM320T:
printf("AM29LV320T (32 Mbit, top boot sector)\n");
break;
case FLASH_SST800A:
printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
break;
case FLASH_SST160A:
printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
break;
default:
printf("Unknown Chip Type\n");
break;
}
printf(" Size: %ld KB in %d Sectors\n",
info->size >> 10, info->sector_count);
printf(" Sector Start Addresses:");
for (i = 0; i < info->sector_count; ++i) {
/*
* Check if whole sector is erased
*/
if (i != (info->sector_count - 1))
size = info->start[i + 1] - info->start[i];
else
size = info->start[0] + info->size - info->start[i];
erased = 1;
flash = (volatile unsigned long *)info->start[i];
size = size >> 2; /* divide by 4 for longword access */
for (k = 0; k < size; k++) {
if (*flash++ != 0xffffffff) {
erased = 0;
break;
}
}
if ((i % 5) == 0)
printf("\n ");
printf(" %08lX%s%s",
info->start[i],
erased ? " E" : " ", info->protect[i] ? "RO " : " ");
}
printf("\n");
return;
}
/*-----------------------------------------------------------------------
*/
/*-----------------------------------------------------------------------
*/
/*
* The following code cannot be run from FLASH!
*/
static ulong flash_get_size(vu_long * addr, flash_info_t * info)
{
short i;
FLASH_WORD_SIZE value;
ulong base = (ulong) addr;
volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
/* Write auto select command: read Manufacturer ID */
udelay(10000);
*(FLASH_WORD_SIZE *) ((int)addr + ADDR0) = (FLASH_WORD_SIZE) 0x00AA;
udelay(1000);
*(FLASH_WORD_SIZE *) ((int)addr + ADDR1) = (FLASH_WORD_SIZE) 0x0055;
udelay(1000);
*(FLASH_WORD_SIZE *) ((int)addr + ADDR0) = (FLASH_WORD_SIZE) 0x0090;
udelay(1000);
value = addr2[0];
DEBUGF("FLASH MANUFACT: %x\n", value);
switch (value) {
case (FLASH_WORD_SIZE) AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
case (FLASH_WORD_SIZE) FUJ_MANUFACT:
info->flash_id = FLASH_MAN_FUJ;
break;
case (FLASH_WORD_SIZE) SST_MANUFACT:
info->flash_id = FLASH_MAN_SST;
break;
case (FLASH_WORD_SIZE) STM_MANUFACT:
info->flash_id = FLASH_MAN_STM;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
return (0); /* no or unknown flash */
}
#ifdef CONFIG_ADCIOP
value = addr2[0]; /* device ID */
debug("\ndev_code=%x\n", value);
#else
value = addr2[1]; /* device ID */
#endif
DEBUGF("\nFLASH DEVICEID: %x\n", value);
info->flash_id = 0;
info->sector_count = CFG_MAX_FLASH_SECT;
info->size = 0x02000000;
/* set up sector start address table */
for (i = 0; i < info->sector_count; i++) {
info->start[i] = (int)base + (i * 0x00020000);
info->protect[i] = 0;
}
*(FLASH_WORD_SIZE *) ((int)addr) = (FLASH_WORD_SIZE) 0x00F0; /* reset bank */
return (info->size);
}
int wait_for_DQ7(flash_info_t * info, int sect)
{
ulong start, now, last;
volatile FLASH_WORD_SIZE *addr =
(FLASH_WORD_SIZE *) (info->start[sect]);
start = get_timer(0);
last = start;
while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
(FLASH_WORD_SIZE) 0x00800080) {
if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
printf("Timeout\n");
return -1;
}
/* show that we're waiting */
if ((now - last) > 1000) { /* every second */
putc('.');
last = now;
}
}
return 0;
}
/*-----------------------------------------------------------------------
*/
int flash_erase(flash_info_t * info, int s_first, int s_last)
{
volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
volatile FLASH_WORD_SIZE *addr2;
int flag, prot, sect, l_sect;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf("- missing\n");
} else {
printf("- no sectors to erase\n");
}
return 1;
}
if (info->flash_id == FLASH_UNKNOWN) {
printf("Can't erase unknown flash type - aborted\n");
return 1;
}
prot = 0;
for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
printf("- Warning: %d protected sectors will not be erased!\n",
prot);
} else {
printf("\n");
}
l_sect = -1;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
printf("Erasing sector %p\n", addr2);
*(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
(FLASH_WORD_SIZE) 0x00AA;
asm("sync");
asm("isync");
*(FLASH_WORD_SIZE *) ((int)addr + ADDR1) =
(FLASH_WORD_SIZE) 0x0055;
asm("sync");
asm("isync");
*(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
(FLASH_WORD_SIZE) 0x0080;
asm("sync");
asm("isync");
*(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
(FLASH_WORD_SIZE) 0x00AA;
asm("sync");
asm("isync");
*(FLASH_WORD_SIZE *) ((int)addr + ADDR1) =
(FLASH_WORD_SIZE) 0x0055;
asm("sync");
asm("isync");
addr2[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */
asm("sync");
asm("isync");
l_sect = sect;
/*
* Wait for each sector to complete, it's more
* reliable. According to AMD Spec, you must
* issue all erase commands within a specified
* timeout. This has been seen to fail, especially
* if printf()s are included (for debug)!!
*/
wait_for_DQ7(info, sect);
}
}
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
/* wait at least 80us - let's wait 1 ms */
udelay(1000);
#if 0
/*
* We wait for the last triggered sector
*/
if (l_sect < 0)
goto DONE;
wait_for_DQ7(info, l_sect);
DONE:
#endif
/* reset to read mode */
addr = (FLASH_WORD_SIZE *) info->start[0];
addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
printf(" done\n");
return 0;
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
ulong cp, wp, data;
int i, l, rc;
ulong status_value = 0;
wp = (addr & ~3); /* get lower word aligned address */
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
for (i = 0, cp = wp; i < l; ++i, ++cp) {
data = (data << 8) | (*(uchar *) cp);
}
for (; i < 4 && cnt > 0; ++i) {
data = (data << 8) | *src++;
--cnt;
++cp;
}
for (; cnt == 0 && i < 4; ++i, ++cp) {
data = (data << 8) | (*(uchar *) cp);
}
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
wp += 4;
}
/*
* handle word aligned part
*/
while (cnt >= 4) {
/*print status if needed */
if ((wp >= (status_value + 0x20000))
&& (status_value < 0xFFFE0000)) {
status_value = wp;
printf("writing to sector 0x%X\n", status_value);
}
data = 0;
for (i = 0; i < 4; ++i) {
data = (data << 8) | *src++;
}
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
wp += 4;
cnt -= 4;
}
if (cnt == 0) {
return (0);
}
/*
* handle unaligned tail bytes
*/
data = 0;
for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
data = (data << 8) | *src++;
--cnt;
}
for (; i < 4; ++i, ++cp) {
data = (data << 8) | (*(uchar *) cp);
}
return (write_word(info, wp, data));
}
/*-----------------------------------------------------------------------
* Write a word to Flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static int write_word(flash_info_t * info, ulong dest, ulong data)
{
vu_long *addr2 = (vu_long *) (info->start[0]);
volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
ulong start;
int i;
/* Check if Flash is (sufficiently) erased */
if ((*((volatile FLASH_WORD_SIZE *)dest) &
(FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
return (2);
}
for (i = 0; i < 4 / sizeof(FLASH_WORD_SIZE); i++) {
int flag;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
*(FLASH_WORD_SIZE *) ((int)addr2 + ADDR0) =
(FLASH_WORD_SIZE) 0x00AA;
asm("sync");
asm("isync");
*(FLASH_WORD_SIZE *) ((int)addr2 + ADDR1) =
(FLASH_WORD_SIZE) 0x0055;
asm("sync");
asm("isync");
*(FLASH_WORD_SIZE *) ((int)addr2 + ADDR0) =
(FLASH_WORD_SIZE) 0x00A0;
asm("sync");
asm("isync");
dest2[i] = data2[i];
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
/* data polling for D7 */
start = get_timer(0);
while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
(data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
return (1);
}
}
}
return (0);
}
/*-----------------------------------------------------------------------
*/

21
board/amcc/yosemite/init.S
View File

@ -86,14 +86,19 @@
tlbtab:
tlbtab_start
/*
0xf0000000 must be first, before relocation SA_I must be off to use the
dcache as stack. It is patched after relocation to enable SA_I
*/
tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
tlbentry( CFG_PCI_BASE, SZ_256M, 0xE0000000, 0, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_NVRAM_BASE_ADDR, SZ_16K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
/*
* BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
* speed up boot process. It is patched after relocation to enable SA_I
*/
tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
/* PCI */
tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )

55
board/amcc/yosemite/yosemite.c
View File

@ -20,9 +20,12 @@
*/
#include <common.h>
#include <ppc4xx.h>
#include <asm/processor.h>
#include <spd_sdram.h>
extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
int board_early_init_f(void)
{
register uint reg;
@ -35,7 +38,7 @@ int board_early_init_f(void)
mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */
mtebc(pb0cr, 0xfe0ba000); /* BAS=0xfe0 32MB r/w 16-bit */
mtebc(pb0cr, 0xfc0da000); /* BAS=0xfc0 64MB r/w 16-bit */
mtebc(pb1ap, 0x00000000);
mtebc(pb1cr, 0x00000000);
@ -122,6 +125,54 @@ int board_early_init_f(void)
return 0;
}
int misc_init_r (void)
{
DECLARE_GLOBAL_DATA_PTR;
uint pbcr;
int size_val = 0;
/* Re-do sizing to get full correct info */
mtdcr(ebccfga, pb0cr);
pbcr = mfdcr(ebccfgd);
switch (gd->bd->bi_flashsize) {
case 1 << 20:
size_val = 0;
break;
case 2 << 20:
size_val = 1;
break;
case 4 << 20:
size_val = 2;
break;
case 8 << 20:
size_val = 3;
break;
case 16 << 20:
size_val = 4;
break;
case 32 << 20:
size_val = 5;
break;
case 64 << 20:
size_val = 6;
break;
case 128 << 20:
size_val = 7;
break;
}
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
mtdcr(ebccfga, pb0cr);
mtdcr(ebccfgd, pbcr);
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
-CFG_MONITOR_LEN,
0xffffffff,
&flash_info[0]);
return 0;
}
int checkboard(void)
{
sys_info_t sysinfo;
@ -135,6 +186,8 @@ int checkboard(void)
printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
printf("\tPER: %lu MHz\n", sysinfo.freqEPB / 1000000);
printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
return (0);
}

2
board/cogent/README.cma286
View File

@ -65,5 +65,5 @@ PITRTCLK=65103.515625 (bloody hell!).
If anyone finds anything wrong with the stuff above, I would appreciate
an email about it.
Murray Jensen <Murray.Jensen@cmst.csiro.au>
Murray Jensen <Murray.Jensen@csiro.au>
21-Aug-00

14
board/esd/du405/du405.c
View File

@ -141,6 +141,20 @@ int board_early_init_f (void)
}
int misc_init_r (void)
{
unsigned long cntrl0Reg;
/*
* Setup UART1 handshaking: use CTS instead of DSR
*/
cntrl0Reg = mfdcr(cntrl0);
mtdcr(cntrl0, cntrl0Reg | 0x00001000);
return (0);
}
/*
* Check Board Identity:
*/

67
board/esd/pci405/pci405.c
View File

@ -77,10 +77,10 @@ int board_revision(void)
*/
cntrl0Reg = mfdcr(cntrl0);
mtdcr(cntrl0, cntrl0Reg | 0x03000000);
out32(GPIO0_ODR, in32(GPIO0_ODR) & ~0x00180000);
out32(GPIO0_TCR, in32(GPIO0_TCR) & ~0x00180000);
out32(GPIO0_ODR, in32(GPIO0_ODR) & ~0x00100200);
out32(GPIO0_TCR, in32(GPIO0_TCR) & ~0x00100200);
udelay(1000); /* wait some time before reading input */
value = in32(GPIO0_IR) & 0x00180000; /* get config bits */
value = in32(GPIO0_IR) & 0x00100200; /* get config bits */
/*
* Restore GPIO settings
@ -88,18 +88,18 @@ int board_revision(void)
mtdcr(cntrl0, cntrl0Reg);
switch (value) {
case 0x00180000:
/* CS2==1 && CS3==1 -> version 1.0 and 1.1 */
case 0x00100200:
/* CS2==1 && IRQ5==1 -> version 1.0 and 1.1 */
return 1;
case 0x00080000:
/* CS2==0 && CS3==1 -> version 1.2 */
case 0x00000200:
/* CS2==0 && IRQ5==1 -> version 1.2 */
return 2;
case 0x00000000:
/* CS2==0 && IRQ5==0 -> version 1.3 */
return 3;
#if 0 /* not yet manufactured ! */
case 0x00100000:
/* CS2==1 && CS3==0 -> version 1.3 */
return 3;
case 0x00000000:
/* CS2==0 && CS3==0 -> version 1.4 */
/* CS2==1 && IRQ5==0 -> version 1.4 */
return 4;
#endif
default:
@ -393,3 +393,48 @@ int testdram (void)
}
/* ------------------------------------------------------------------------- */
int wpeeprom(int wp)
{
int wp_state = wp;
volatile unsigned char *uart1_mcr = (volatile unsigned char *)0xef600404;
if (wp == 1) {
*uart1_mcr &= ~0x02;
} else if (wp == 0) {
*uart1_mcr |= 0x02;
} else {
if (*uart1_mcr & 0x02) {
wp_state = 0;
} else {
wp_state = 1;
}
}
return wp_state;
}
int do_wpeeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int wp = -1;
if (argc >= 2) {
if (argv[1][0] == '1') {
wp = 1;
} else if (argv[1][0] == '0') {
wp = 0;
}
}
wp = wpeeprom(wp);
printf("EEPROM write protection %s\n", wp ? "ENABLED" : "DISABLED");
return 0;
}
U_BOOT_CMD(
wpeeprom, 2, 1, do_wpeeprom,
"wpeeprom - Check/Enable/Disable I2C EEPROM write protection\n",
"wpeeprom\n"
" - check I2C EEPROM write protection state\n"
"wpeeprom 1\n"
" - enable I2C EEPROM write protection\n"
"wpeeprom 0\n"
" - disable I2C EEPROM write protection\n"
);

3543
board/esd/wuh405/fpgadata.c
View File

File diff suppressed because it is too large Load Diff

541
board/pm854/flash.c
View File

@ -1,541 +0,0 @@
/*
* (C) Copyright 2003 Motorola Inc.
* Xianghua Xiao,(X.Xiao@motorola.com)
*
* (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
* Add support the Sharp chips on the mpc8260ads.
* I started with board/ip860/flash.c and made changes I found in
* the MTD project by David Schleef.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#if !defined(CFG_NO_FLASH)
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
#if defined(CFG_ENV_IS_IN_FLASH)
# ifndef CFG_ENV_ADDR
# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
# endif
# ifndef CFG_ENV_SIZE
# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
# endif
# ifndef CFG_ENV_SECT_SIZE
# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
# endif
#endif
#undef DEBUG
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size (vu_long *addr, flash_info_t *info);
static int write_word (flash_info_t *info, ulong dest, ulong data);
static int clear_block_lock_bit(vu_long * addr);
/*-----------------------------------------------------------------------
*/
unsigned long flash_init (void)
{
unsigned long size;
int i;
/* Init: enable write,
* or we cannot even write flash commands
*/
for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
/* set the default sector offset */
}
/* Static FLASH Bank configuration here - FIXME XXX */
size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
size, size<<20);
}
/* Re-do sizing to get full correct info */
size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
flash_info[0].size = size;
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CFG_MONITOR_BASE,
CFG_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#ifdef CFG_ENV_IS_IN_FLASH
/* ENV protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CFG_ENV_ADDR,
CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
&flash_info[0]);
#endif
#endif
return (size);
}
/*-----------------------------------------------------------------------
*/
void flash_print_info (flash_info_t *info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_INTEL: printf ("Intel "); break;
case FLASH_MAN_SHARP: printf ("Sharp "); break;
default: printf ("Unknown Vendor "); break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_28F016SV: printf ("28F016SV (16 Mbit, 32 x 64k)\n");
break;
case FLASH_28F160S3: printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
break;
case FLASH_28F320S3: printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
break;
case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
break;
case FLASH_28F640J3A: printf ("28F640J3A (64 Mbit, 64 x 128K)\n");
break;
case FLASH_28F128J3A: printf ("28F128J3A (128 Mbit, 128 x 128K)\n");
break;
default: printf ("Unknown Chip Type\n");
break;
}
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf (" Sector Start Addresses:");
for (i=0; i<info->sector_count; ++i) {
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s",
info->start[i],
info->protect[i] ? " (RO)" : " "
);
}
printf ("\n");
}
/*
* The following code cannot be run from FLASH!
*/
static ulong flash_get_size (vu_long *addr, flash_info_t *info)
{
short i;
ulong value;
ulong base = (ulong)addr;
ulong sector_offset;
#ifdef DEBUG
printf("Check flash at 0x%08x\n",(uint)addr);
#endif
/* Write "Intelligent Identifier" command: read Manufacturer ID */
*addr = 0x90909090;
udelay(20);
asm("sync");
value = addr[0] & 0x00FF00FF;
#ifdef DEBUG
printf("manufacturer=0x%x\n",(uint)value);
#endif
switch (value) {
case MT_MANUFACT: /* SHARP, MT or => Intel */
case INTEL_ALT_MANU:
info->flash_id = FLASH_MAN_INTEL;
break;
default:
printf("unknown manufacturer: %x\n", (unsigned int)value);
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
return (0); /* no or unknown flash */
}
value = addr[1] & 0x00FF00FF; /* device ID */
#ifdef DEBUG
printf("deviceID=0x%x\n",(uint)value);
#endif
switch (value) {
case (INTEL_ID_28F016S):
info->flash_id += FLASH_28F016SV;
info->sector_count = 32;
info->size = 0x00400000;
sector_offset = 0x20000;
break; /* => 2x2 MB */
case (INTEL_ID_28F160S3):
info->flash_id += FLASH_28F160S3;
info->sector_count = 32;
info->size = 0x00400000;
sector_offset = 0x20000;
break; /* => 2x2 MB */
case (INTEL_ID_28F320S3):
info->flash_id += FLASH_28F320S3;
info->sector_count = 64;
info->size = 0x00800000;
sector_offset = 0x20000;
break; /* => 2x4 MB */
case (INTEL_ID_28F640J3A):
info->flash_id += FLASH_28F640J3A;
info->sector_count = 64;
info->size = 0x01000000;
sector_offset = 0x40000;
break; /* => 2x8 MB */
case (INTEL_ID_28F128J3A):
info->flash_id += FLASH_28F128J3A;
info->sector_count = 128;
info->size = 0x02000000;
sector_offset = 0x40000;
break; /* => 2x16 MB */
case SHARP_ID_28F016SCL:
case SHARP_ID_28F016SCZ:
info->flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
info->sector_count = 32;
info->size = 0x00800000;
sector_offset = 0x40000;
break; /* => 4x2 MB */
default:
info->flash_id = FLASH_UNKNOWN;
return (0); /* => no or unknown flash */
}
/* set up sector start address table */
for (i = 0; i < info->sector_count; i++) {
info->start[i] = base;
base += sector_offset;
/* don't know how to check sector protection */
info->protect[i] = 0;
}
/*
* Prevent writes to uninitialized FLASH.
*/
if (info->flash_id != FLASH_UNKNOWN) {
addr = (vu_long *)info->start[0];
*addr = 0xFFFFFF; /* reset bank to read array mode */
asm("sync");
}
return (info->size);
}
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t *info, int s_first, int s_last)
{
int flag, prot, sect;
ulong start, now, last;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
}
return 1;
}
if ( ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
&& ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
printf ("Can't erase unknown flash type %08lx - aborted\n",
info->flash_id);
return 1;
}
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
printf ("- Warning: %d protected sectors will not be erased!\n",
prot);
} else {
printf ("\n");
}
#ifdef DEBUG
printf("\nFlash Erase:\n");
#endif
/* Make Sure Block Lock Bit is not set. */
if(clear_block_lock_bit((vu_long *)(info->start[s_first]))){
return 1;
}
/* Start erase on unprotected sectors */
#if defined(DEBUG)
printf("Begin to erase now,s_first=0x%x s_last=0x%x...\n",s_first,s_last);
#endif
for (sect = s_first; sect<=s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
vu_long *addr = (vu_long *)(info->start[sect]);
asm("sync");
last = start = get_timer (0);
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
/* Reset Array */
*addr = 0xffffffff;
asm("sync");
/* Clear Status Register */
*addr = 0x50505050;
asm("sync");
/* Single Block Erase Command */
*addr = 0x20202020;
asm("sync");
/* Confirm */
*addr = 0xD0D0D0D0;
asm("sync");
if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
/* Resume Command, as per errata update */
*addr = 0xD0D0D0D0;
asm("sync");
}
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
/* wait at least 80us - let's wait 1 ms */
udelay (1000);
while ((*addr & 0x00800080) != 0x00800080) {
if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = 0xFFFFFFFF; /* reset bank */
asm("sync");
return 1;
}
/* show that we're waiting */
if ((now - last) > 1000) { /* every second */
putc ('.');
last = now;
}
}
/* reset to read mode */
*addr = 0xFFFFFFFF;
asm("sync");
}
}
printf ("flash erase done\n");
return 0;
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
ulong cp, wp, data;
int i, l, rc;
wp = (addr & ~3); /* get lower word aligned address */
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
for (i=0, cp=wp; i<l; ++i, ++cp) {
data = (data << 8) | (*(uchar *)cp);
}
for (; i<4 && cnt>0; ++i) {
data = (data << 8) | *src++;
--cnt;
++cp;
}
for (; cnt==0 && i<4; ++i, ++cp) {
data = (data << 8) | (*(uchar *)cp);
}
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
wp += 4;
}
/*
* handle word aligned part
*/
while (cnt >= 4) {
data = 0;
for (i=0; i<4; ++i) {
data = (data << 8) | *src++;
}
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
wp += 4;
cnt -= 4;
}
if (cnt == 0) {
return (0);
}
/*
* handle unaligned tail bytes
*/
data = 0;
for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
data = (data << 8) | *src++;
--cnt;
}
for (; i<4; ++i, ++cp) {
data = (data << 8) | (*(uchar *)cp);
}
return (write_word(info, wp, data));
}
/*-----------------------------------------------------------------------
* Write a word to Flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static int write_word (flash_info_t *info, ulong dest, ulong data)
{
vu_long *addr = (vu_long *)dest;
ulong start, csr;
int flag;
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
/* Write Command */
*addr = 0x10101010;
asm("sync");
/* Write Data */
*addr = data;
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
/* data polling for D7 */
start = get_timer (0);
flag = 0;
while (((csr = *addr) & 0x00800080) != 0x00800080) {
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
flag = 1;
break;
}
}
if (csr & 0x40404040) {
printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
flag = 1;
}
/* Clear Status Registers Command */
*addr = 0x50505050;
asm("sync");
/* Reset to read array mode */
*addr = 0xFFFFFFFF;
asm("sync");
return (flag);
}
/*-----------------------------------------------------------------------
* Clear Block Lock Bit, returns:
* 0 - OK
* 1 - Timeout
*/
static int clear_block_lock_bit(vu_long * addr)
{
ulong start, now;
/* Reset Array */
*addr = 0xffffffff;
asm("sync");
/* Clear Status Register */
*addr = 0x50505050;
asm("sync");
*addr = 0x60606060;
asm("sync");
*addr = 0xd0d0d0d0;
asm("sync");
start = get_timer (0);
while((*addr & 0x00800080) != 0x00800080){
if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
printf ("Timeout on clearing Block Lock Bit\n");
*addr = 0xFFFFFFFF; /* reset bank */
asm("sync");
return 1;
}
}
return 0;
}
#endif /* !CFG_NO_FLASH */

4
board/tqm5200/tqm5200.c
View File

@ -250,6 +250,10 @@ long int initdram (int board_type)
int checkboard (void)
{
#if defined (CONFIG_AEVFIFO)
puts ("Board: AEVFIFO\n");
return 0;
#endif
#if defined (CONFIG_TQM5200_AA)
puts ("Board: TQM5200-AA (TQ-Components GmbH)\n");
#elif defined (CONFIG_TQM5200_AB)

8
board/voiceblue/Makefile
View File

@ -32,21 +32,23 @@ SOBJS := setup.o
gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
LOAD_ADDR = 0x10400000
LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/eeprom.lds
all: $(LIB) eeprom.srec eeprom.bin
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
eeprom.srec: eeprom.o
$(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $^ \
eeprom.srec: eeprom.o eeprom_start.o
$(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \
-o $(<:.o=) -e $(<:.o=) $^ \
-L../../examples -lstubs \
-L../../lib_generic -lgeneric \
-L$(gcclibdir) -lgcc
$(OBJCOPY) -O srec $(<:.o=) $@
eeprom.bin: eeprom.srec
$(OBJCOPY) -O binary $< $@ 2>/dev/null
$(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null
clean:
rm -f $(SOBJS) $(OBJS) eeprom eeprom.srec eeprom.bin

143
board/voiceblue/eeprom.c
View File

@ -30,40 +30,6 @@
#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
static int verify_macaddr(char *);
static int set_mac(char *);
int eeprom(int argc, char *argv[])
{
app_startup(argv);
if (get_version() != XF_VERSION) {
printf("Wrong XF_VERSION.\n");
printf("Application expects ABI version %d\n", XF_VERSION);
printf("Actual U-Boot ABI version %d\n", (int)get_version());
return 1;
}
if ((SMC_inw (BANK_SELECT) & 0xFF00) != 0x3300) {
printf("SMSC91111 not found.\n");
return 2;
}
if (argc != 2) {
printf("VoiceBlue EEPROM writer\n");
printf("Built: %s at %s\n", __DATE__ , __TIME__ );
printf("Usage:\n\t<mac_address>");
return 3;
}
set_mac(argv[1]);
if (verify_macaddr(argv[1])) {
printf("*** ERROR ***\n");
return 4;
}
return 0;
}
static u16 read_eeprom_reg(u16 reg)
{
int timeout;
@ -106,17 +72,28 @@ static int write_eeprom_reg(u16 value, u16 reg)
return 1;
}
static int write_data(u16 *buf, int len)
{
u16 reg = 0x23;
while (len--)
write_eeprom_reg(*buf++, reg++);
return 0;
}
static int verify_macaddr(char *s)
{
u16 reg;
int i, err = 0;
printf("Verifying MAC Address: ");
printf("MAC Address: ");
err = i = 0;
for (i = 0; i < 3; i++) {
reg = read_eeprom_reg(0x20 + i);
printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n');
err |= reg != ((u16 *)s)[i];
if (s)
err |= reg != ((u16 *)s)[i];
}
return err ? 0 : 1;
@ -138,3 +115,97 @@ static int set_mac(char *s)
return 0;
}
static int parse_element(char *s, unsigned char *buf, int len)
{
int cnt;
char *p, num[3];
unsigned char id;
id = simple_strtoul(s, &p, 16);
if (*p++ != ':')
return -1;
cnt = 2;
num[2] = 0;
for (; *p; p += 2) {
if (p[1] == 0)
return -2;
if (cnt + 3 > len)
return -3;
num[0] = p[0];
num[1] = p[1];
buf[cnt++] = simple_strtoul(num, NULL, 16);
}
buf[0] = id;
buf[1] = cnt - 2;
return cnt;
}
int eeprom(int argc, char *argv[])
{
int i, len, ret;
unsigned char buf[58], *p;
app_startup(argv);
if (get_version() != XF_VERSION) {
printf("Wrong XF_VERSION.\n");
printf("Application expects ABI version %d\n", XF_VERSION);
printf("Actual U-Boot ABI version %d\n", (int)get_version());
return 1;
}
if ((SMC_inw (BANK_SELECT) & 0xFF00) != 0x3300) {
printf("SMSC91111 not found.\n");
return 2;
}
/* Called without parameters - print MAC address */
if (argc < 2) {
verify_macaddr(NULL);
return 0;
}
/* Print help message */
if (argv[1][1] == 'h') {
printf("VoiceBlue EEPROM writer\n");
printf("Built: %s at %s\n", __DATE__ , __TIME__ );
printf("Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
return 0;
}
/* Try to parse information elements */
len = sizeof(buf);
p = buf;
for (i = 2; i < argc; i++) {
ret = parse_element(argv[i], p, len);
switch (ret) {
case -1:
printf("Element %d: malformed\n", i - 1);
return 3;
case -2:
printf("Element %d: odd character count\n", i - 1);
return 3;
case -3:
printf("Out of EEPROM memory\n");
return 3;
default:
p += ret;
len -= ret;
}
}
/* First argument (MAC) is mandatory */
set_mac(argv[1]);
if (verify_macaddr(argv[1])) {
printf("*** MAC address does not match! ***\n");
return 4;
}
while (len--)
*p++ = 0;
write_data((u16 *)buf, sizeof(buf) >> 1);
return 0;
}

51
board/voiceblue/eeprom.lds Normal file
View File

@ -0,0 +1,51 @@
/*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
* (C) Copyright 2005
* Ladislav Michl, 2N Telekomunikace, <michl@2n.cz>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
SECTIONS
{
. = ALIGN(4);
.text :
{
eeprom_start.o (.text)
*(.text)
}
. = ALIGN(4);
.rodata : { *(.rodata) }
. = ALIGN(4);
.data : { *(.data) }
. = ALIGN(4);
.got : { *(.got) }
. = ALIGN(4);
__bss_start = .;
.bss : { *(.bss) }
_end = .;
}

11
board/voiceblue/eeprom_start.S Normal file
View File

@ -0,0 +1,11 @@
/*
* Copyright (c) 2005 2N Telekomunikace
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*/
.globl _start
_start: b eeprom

2
common/cmd_ace.c
View File

@ -31,7 +31,7 @@
* available to cmd_fat.c:get_dev and filling in a block device
* description that has all the bits needed for FAT support to
* read sectors.
*
*
* According to Xilinx technical support, before accessing the
* SystemACE CF you need to set the following control bits:
* FORCECFGMODE : 1

8
common/cmd_bdinfo.c
View File

@ -62,14 +62,14 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
print_num ("bootflags", bd->bi_bootflags );
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
defined(CONFIG_440EP) || defined(CONFIG_440GR)
print_str ("procfreq", strmhz(buf, bd->bi_procfreq));
print_str ("plb_busfreq", strmhz(buf, bd->bi_plb_busfreq));
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
defined(CONFIG_440EP) || defined(CONFIG_440GR)
print_str ("pci_busfreq", strmhz(buf, bd->bi_pci_busfreq));
#endif
#else /* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440_EP CONFIG_440_GR */
#else /* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440EP CONFIG_440GR */
#if defined(CONFIG_CPM2)
print_str ("vco", strmhz(buf, bd->bi_vco));
print_str ("sccfreq", strmhz(buf, bd->bi_sccfreq));
@ -80,7 +80,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
print_str ("cpmfreq", strmhz(buf, bd->bi_cpmfreq));
#endif
print_str ("busfreq", strmhz(buf, bd->bi_busfreq));
#endif /* CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440_EP CONFIG_440_GR */
#endif /* CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440EP CONFIG_440GR */
#if defined(CONFIG_MPC8220)
print_str ("inpfreq", strmhz(buf, bd->bi_inpfreq));
print_str ("flbfreq", strmhz(buf, bd->bi_flbfreq));

27
common/cmd_flash.c
View File

@ -534,7 +534,7 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return rcode;
}
#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
/* protect on/off <part-id> */
if ((argc == 3) && (id_parse(argv[2], NULL, &dev_type, &dev_num) == 0)) {
@ -664,6 +664,15 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last)
/**************************************************/
#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
# define TMP_ERASE "erase <part-id>\n - erase partition\n"
# define TMP_PROT_ON "protect on <part-id>\n - protect partition\n"
# define TMP_PROT_OFF "protect off <part-id>\n - make partition writable\n"
#else
# define TMP_ERASE /* empty */
# define TMP_PROT_ON /* empty */
# define TMP_PROT_OFF /* empty */
#endif
U_BOOT_CMD(
flinfo, 2, 1, do_flinfo,
@ -682,9 +691,7 @@ U_BOOT_CMD(
"w/addr 'start'+'len'-1\n"
"erase N:SF[-SL]\n - erase sectors SF-SL in FLASH bank # N\n"
"erase bank N\n - erase FLASH bank # N\n"
#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
"erase <part-id>\n - erase partition\n"
#endif
TMP_ERASE
"erase all\n - erase all FLASH banks\n"
);
@ -699,9 +706,7 @@ U_BOOT_CMD(
"protect on N:SF[-SL]\n"
" - protect sectors SF-SL in FLASH bank # N\n"
"protect on bank N\n - protect FLASH bank # N\n"
#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
"protect on <part-id>\n - protect partition\n"
#endif
TMP_PROT_ON
"protect on all\n - protect all FLASH banks\n"
"protect off start end\n"
" - make FLASH from addr 'start' to addr 'end' writable\n"
@ -711,10 +716,12 @@ U_BOOT_CMD(
"protect off N:SF[-SL]\n"
" - make sectors SF-SL writable in FLASH bank # N\n"
"protect off bank N\n - make FLASH bank # N writable\n"
#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
"protect off <part-id>\n - make partition writable\n"
#endif
TMP_PROT_OFF
"protect off all\n - make all FLASH banks writable\n"
);
#undef TMP_ERASE
#undef TMP_PROT_ON
#undef TMP_PROT_OFF
#endif /* CFG_CMD_FLASH */

8
common/cmd_fpga.c
View File

@ -137,9 +137,9 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
__FUNCTION__);
return FPGA_FAIL;
}
swapsize = ((unsigned int) *dataptr <<24) +
((unsigned int) *(dataptr+1) <<16) +
((unsigned int) *(dataptr+2) <<8 ) +
swapsize = ((unsigned int) *dataptr <<24) +
((unsigned int) *(dataptr+1) <<16) +
((unsigned int) *(dataptr+2) <<8 ) +
((unsigned int) *(dataptr+3) ) ;
dataptr+=4;
printf(" bytes in bitstream = %d\n", swapsize);
@ -217,7 +217,7 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
PRINTF ("%s: device = %d\n", __FUNCTION__, dev);
/* FIXME - this is a really weak test */
if ((argc == 3) && (dev > fpga_count ())) { /* must be buffer ptr */
PRINTF ("%s: Assuming buffer pointer in arg 3\n",
PRINTF ("%s: Assuming buffer pointer in arg 3\n",
__FUNCTION__);
fpga_data = (void *) dev;
PRINTF ("%s: fpga_data = 0x%x\n",

65
common/cmd_jffs2.c
View File

@ -45,7 +45,7 @@
* partition := <part-id>
* <part-id> := <dev-id>,part_num
*
*
*
* 'mtdids' - linux kernel mtd device id <-> u-boot device id mapping
*
* mtdids=<idmap>[,<idmap>,...]
@ -403,7 +403,7 @@ static int part_del(struct mtd_device *dev, struct part_info *part)
return device_del(dev);
/* otherwise just delete this partition */
if (dev == current_dev) {
/* we are modyfing partitions for the current device,
* update current */
@ -416,7 +416,7 @@ static int part_del(struct mtd_device *dev, struct part_info *part)
current_partnum = 0;
current_save();
} else if (part->offset <= curr_pi->offset) {
current_partnum--;
current_partnum--;
current_save();
}
}
@ -471,7 +471,7 @@ static int part_sort_add(struct mtd_device *dev, struct part_info *part)
list_add(&part->link, &dev->parts);
return 0;
}
new_pi = list_entry(&part->link, struct part_info, link);
/* get current partition info if we are updating current device */
@ -492,7 +492,7 @@ static int part_sort_add(struct mtd_device *dev, struct part_info *part)
if (new_pi->offset <= pi->offset) {
list_add_tail(&part->link, entry);
if (curr_pi && (pi->offset <= curr_pi->offset)) {
/* we are modyfing partitions for the current
* device, update current */
@ -516,7 +516,7 @@ static int part_sort_add(struct mtd_device *dev, struct part_info *part)
*/
static int part_add(struct mtd_device *dev, struct part_info *part)
{
/* verify alignment and size */
/* verify alignment and size */
if (part_validate(dev->id, part) != 0)
return 1;
@ -565,14 +565,14 @@ static int part_parse(const char *const partdef, const char **ret, struct part_i
}
}
/* check for offset */
/* check for offset */
offset = OFFSET_NOT_SPECIFIED;
if (*p == '@') {
p++;
offset = memsize_parse(p, &p);
}
/* now look for the name */
/* now look for the name */
if (*p == '(') {
name = ++p;
if ((p = strchr(name, ')')) == NULL) {
@ -591,7 +591,7 @@ static int part_parse(const char *const partdef, const char **ret, struct part_i
name = NULL;
}
/* test for options */
/* test for options */
mask_flags = 0;
if (strncmp(p, "ro", 2) == 0) {
mask_flags |= MTD_WRITEABLE;
@ -823,8 +823,8 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_
printf("invalid mtd device '%.*s'\n", mtd_id_len - 1, mtd_id);
return 1;
}
DEBUGF("dev type = %d (%s), dev num = %d, mtd-id = %s\n",
DEBUGF("dev type = %d (%s), dev num = %d, mtd-id = %s\n",
id->type, MTD_DEV_TYPE(id->type),
id->num, id->mtd_id);
pend = strchr(p, ';');
@ -836,7 +836,7 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_
offset = 0;
if ((dev = device_find(id->type, id->num)) != NULL) {
/* if device already exists start at the end of the last partition */
/* if device already exists start at the end of the last partition */
part = list_entry(dev->parts.prev, struct part_info, link);
offset = part->offset + part->size;
}
@ -852,7 +852,7 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_
else
offset = part->offset;
/* verify alignment and size */
/* verify alignment and size */
if (part_validate(id, part) != 0)
break;
@ -885,7 +885,7 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_
} else {
printf("unexpected character '%c' at the end of device\n", *p);
*ret = NULL;
return 1;
return 1;
}
}
@ -939,7 +939,7 @@ static struct mtdids* id_find(u8 type, u8 num)
{
struct list_head *entry;
struct mtdids *id;
list_for_each(entry, &mtdids) {
id = list_entry(entry, struct mtdids, link);
@ -951,7 +951,7 @@ static struct mtdids* id_find(u8 type, u8 num)
}
/**
* Search global mtdids list and find id of a requested mtd_id.
* Search global mtdids list and find id of a requested mtd_id.
*
* Note: first argument is not null terminated.
*
@ -963,7 +963,7 @@ static struct mtdids* id_find_by_mtd_id(const char *mtd_id, unsigned int mtd_id_
{
struct list_head *entry;
struct mtdids *id;
DEBUGF("--- id_find_by_mtd_id: '%.*s' (len = %d)\n",
mtd_id_len, mtd_id, mtd_id_len);
@ -1045,13 +1045,13 @@ static int generate_mtdparts(char *buf, u32 buflen)
buf[0] = '\0';
return 0;
}
sprintf(p, "mtdparts=");
p += 9;
list_for_each(dentry, &devices) {
dev = list_entry(dentry, struct mtd_device, link);
/* copy mtd_id */
len = strlen(dev->id->mtd_id) + 1;
if (len > maxlen)
@ -1078,8 +1078,8 @@ static int generate_mtdparts(char *buf, u32 buflen)
memcpy(p, tmpbuf, len);
p += len;
maxlen -= len;
/* add offset only when there is a gap between
* partitions */
if ((!prev_part && (offset != 0)) ||
@ -1107,7 +1107,7 @@ static int generate_mtdparts(char *buf, u32 buflen)
*(p++) = ')';
maxlen -= len;
}
/* ro mask flag */
if (part->mask_flags && MTD_WRITEABLE) {
len = 2;
@ -1188,7 +1188,7 @@ static void list_partitions(void)
MTD_DEV_TYPE(dev->id->type), dev->id->num,
dev->id->mtd_id, dev->num_parts);
printf(" #: name\t\t\tsize\t\toffset\t\tmask_flags\n");
/* list partitions for given device */
part_num = 0;
list_for_each(pentry, &dev->parts) {
@ -1256,7 +1256,7 @@ int find_dev_and_part(const char *id, struct mtd_device **dev,
printf("unexpected trailing character '%c'\n", *p);
return 1;
}
if ((*dev = device_find(type, dnum)) == NULL) {
printf("no such device %s%d\n", MTD_DEV_TYPE(type), dnum);
return 1;
@ -1328,7 +1328,7 @@ static int parse_mtdparts(const char *const mtdparts)
/* re-read 'mtdparts' variable, devices_init may be updating env */
p = getenv("mtdparts");
if (strncmp(p, "mtdparts=", 9) != 0) {
printf("mtdparts variable doesn't start with 'mtdparts='\n");
return err;
@ -1615,7 +1615,7 @@ int mtdparts_init(void)
/**
* Parse and initialize global mtdids mapping and create global
* device/partition list.
* device/partition list.
*
* @return 0 on success, 1 otherwise
*/
@ -1627,6 +1627,9 @@ int mtdparts_init(void)
DEBUGF("\n---mtdparts_init---\n");
if (!initialized) {
struct mtdids *id;
struct part_info *part;
initialized = 1;
current_dev = (struct mtd_device *)
malloc(sizeof(struct mtd_device) +
@ -1639,8 +1642,8 @@ int mtdparts_init(void)
memset(current_dev, 0, sizeof(struct mtd_device) +
sizeof(struct part_info) + sizeof(struct mtdids));
struct mtdids *id = (struct mtdids *)(current_dev + 1);
struct part_info *part = (struct part_info *)(id + 1);
id = (struct mtdids *)(current_dev + 1);
part = (struct part_info *)(id + 1);
/* id */
id->mtd_id = "single part";
@ -1867,7 +1870,7 @@ int do_jffs2_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
/* make sure we are in sync with env variables */
if (mtdparts_init() !=0)
return 1;
if ((part = jffs2_part_info(current_dev, current_partnum))){
/* check partition type for cramfs */
@ -1965,7 +1968,7 @@ int do_jffs2_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
list_partitions();
return 0;
}
/* mtdparts add <mtd-dev> <size>[@<offset>] <name> [ro] */
if (((argc == 5) || (argc == 6)) && (strcmp(argv[1], "add") == 0)) {
#define PART_ADD_DESC_MAXLEN 64
@ -1995,7 +1998,7 @@ int do_jffs2_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 1;
}
sprintf(tmpbuf, "%s:%s(%s)%s",
id->mtd_id, argv[3], argv[4], argv[5] ? argv[5] : "");
id->mtd_id, argv[3], argv[4], argv[5] ? argv[5] : "");
DEBUGF("add tmpbuf: %s\n", tmpbuf);
if ((device_parse(tmpbuf, NULL, &dev) != 0) || (!dev))

3
common/cmd_nand.c
View File

@ -225,10 +225,11 @@ int do_nand (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
#ifdef CFG_NAND_SKIP_BAD_DOT_I
/* need ".i" same as ".jffs2s" for compatibility with older units (esd) */
/* ".i" for image -> read skips bad block (no 0xff) */
else if (cmdtail && !strcmp(cmdtail, ".i"))
else if (cmdtail && !strcmp(cmdtail, ".i")) {
cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */
if (cmd & NANDRW_READ)
cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */
}
#endif /* CFG_NAND_SKIP_BAD_DOT_I */
else if (cmdtail) {
printf ("Usage:\n%s\n", cmdtp->usage);

18
common/hush.c
View File

@ -1022,12 +1022,30 @@ static void get_user_input(struct in_str *i)
int n;
static char the_command[CFG_CBSIZE];
#ifdef CONFIG_BOOT_RETRY_TIME
# ifdef CONFIG_RESET_TO_RETRY
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
# else
# error "This currently only works with CONFIG_RESET_TO_RETRY enabled"
# endif
reset_cmd_timeout();
#endif
i->__promptme = 1;
if (i->promptmode == 1) {
n = readline(CFG_PROMPT);
} else {
n = readline(CFG_PROMPT_HUSH_PS2);
}
#ifdef CONFIG_BOOT_RETRY_TIME
if (n == -2) {
puts("\nTimeout waiting for command\n");
# ifdef CONFIG_RESET_TO_RETRY
do_reset(NULL, 0, 0, NULL);
# else
# error "This currently only works with CONFIG_RESET_TO_RETRY enabled"
# endif
}
#endif
if (n == -1 ) {
flag_repeat = 0;
i->__promptme = 0;

2
common/lynxkdi.c
View File

@ -20,7 +20,7 @@
#if defined(CONFIG_LYNXKDI)
#include <lynxkdi.h>
#if defined(CONFIG_MPC8260) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_MPC8260) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
void lynxkdi_boot ( image_header_t *hdr )
{
void (*lynxkdi)(void) = (void(*)(void))hdr->ih_ep;

8
common/miiphyutil.c
View File

@ -93,7 +93,13 @@ int miiphy_reset (unsigned char addr)
unsigned short reg;
int loop_cnt;
if (miiphy_write (addr, PHY_BMCR, 0x8000) != 0) {
if (miiphy_read (addr, PHY_BMCR, &reg) != 0) {
#ifdef DEBUG
printf ("PHY status read failed\n");
#endif
return (-1);
}
if (miiphy_write (addr, PHY_BMCR, reg | 0x8000) != 0) {
#ifdef DEBUG
puts ("PHY reset failed\n");
#endif

2
cpu/arm920t/at91rm9200/serial.c
View File

@ -56,7 +56,7 @@ void serial_setbrg (void)
if ((baudrate = gd->baudrate) <= 0)
baudrate = CONFIG_BAUDRATE;
/* MASTER_CLOCK/(16 * baudrate) */
us->US_BRGR = (AT91C_MASTER_CLOCK >> 4)/baudrate;
us->US_BRGR = (AT91C_MASTER_CLOCK >> 4) / (unsigned)baudrate;
}
int serial_init (void)

2
cpu/mpc8xx/speed.c
View File

@ -25,7 +25,7 @@
#include <mpc8xx.h>
#include <asm/processor.h>
#if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CFG_MEASURE_CPUCLK)
#if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CFG_MEASURE_CPUCLK) || defined(DEBUG)
#define PITC_SHIFT 16
#define PITR_SHIFT 16

4
cpu/ppc4xx/405gp_enet.c
View File

@ -227,7 +227,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
while (mfdcr (malmcr) & MAL_CR_MMSR) {
};
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
out32 (ZMII_FER, 0);
udelay(100);
/* set RII mode */
@ -464,7 +464,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
out32(ZMII_SSR, in32(ZMII_SSR) | 0x10000000);
else
out32(ZMII_SSR, in32(ZMII_SSR) & ~0x10000000);
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mfsdr(sdr_mfr, reg);
/* set speed */
if (speed == _100BASET) {

6
cpu/ppc4xx/405gp_pci.c
View File

@ -437,7 +437,7 @@ void pci_440_init (struct pci_controller *hose)
* The PCI initialization sequence enable bit must be set ... if not abort
* pci setup since updating the bit requires chip reset.
*--------------------------------------------------------------------------*/
#if defined (CONFIG_440_GX) || defined (CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined (CONFIG_440GX) || defined (CONFIG_440EP) || defined(CONFIG_440GR)
mfsdr(sdr_sdstp1,strap);
if ( (strap & 0x00010000) == 0 ){
printf("PCI: SDR0_STRP1[PISE] not set.\n");
@ -495,7 +495,7 @@ void pci_440_init (struct pci_controller *hose)
out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */
#endif
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
out32r( PCIX0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */
out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */
#elif defined(PCIX0_BRDGOPT1)
@ -531,7 +531,7 @@ void pci_440_init (struct pci_controller *hose)
#ifdef CONFIG_PCI_SCAN_SHOW
printf("PCI: Bus Dev VenId DevId Class Int\n");
#endif
#if !defined(CONFIG_440_EP) && !defined(CONFIG_440_GR)
#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER);
#endif
hose->last_busno = pci_hose_scan(hose);

56
cpu/ppc4xx/440gx_enet.c
View File

@ -175,7 +175,7 @@ static void ppc_440x_eth_halt (struct eth_device *dev)
extern int phy_setup_aneg (unsigned char addr);
extern int miiphy_reset (unsigned char addr);
#if defined (CONFIG_440_GX)
#if defined (CONFIG_440GX)
int ppc_440x_eth_setup_bridge(int devnum, bd_t * bis)
{
unsigned long pfc1;
@ -279,7 +279,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
unsigned short devnum;
unsigned short reg_short;
sys_info_t sysinfo;
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
int ethgroup;
#endif
@ -323,7 +323,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
/* MAL Channel RESET */
/* 1st reset MAL channel */
/* Note: writing a 0 to a channel has no effect */
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mtdcr (maltxcarr, (MAL_TXRX_CASR >> (hw_p->devnum*2)));
#else
mtdcr (maltxcarr, (MAL_TXRX_CASR >> hw_p->devnum));
@ -362,9 +362,9 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
out32 (ZMII_FER, 0);
udelay (100);
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
out32 (ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
#elif defined(CONFIG_440_GX)
#elif defined(CONFIG_440GX)
ethgroup = ppc_440x_eth_setup_bridge(devnum, bis);
#else
if ((devnum == 0) || (devnum == 1)) {
@ -375,8 +375,8 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
out32 (RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) |
(RGMII_FER_RGMII << RGMII_FER_V (3))));
}
#endif
out32 (ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum));
__asm__ volatile ("eieio");
@ -391,7 +391,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
failsafe--;
}
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
/* Whack the M1 register */
mode_reg = 0x0;
mode_reg &= ~0x00000038;
@ -406,7 +406,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
mode_reg |= EMAC_M1_OBCI_GT100;
out32 (EMAC_M1 + hw_p->hw_addr, mode_reg);
#endif /* defined(CONFIG_440_GX) */
#endif /* defined(CONFIG_440GX) */
/* wait for PHY to complete auto negotiation */
reg_short = 0;
@ -418,7 +418,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
case 1:
reg = CONFIG_PHY1_ADDR;
break;
#if defined (CONFIG_440_GX)
#if defined (CONFIG_440GX)
case 2:
reg = CONFIG_PHY2_ADDR;
break;
@ -441,7 +441,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
if (hw_p->first_init == 0) {
miiphy_reset (reg);
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
#if defined(CONFIG_CIS8201_PHY)
/*
* Cicada 8201 PHY needs to have an extended register whacked
@ -512,7 +512,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
(int) speed, (duplex == HALF) ? "HALF" : "FULL");
}
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mfsdr(sdr_mfr, reg);
if (speed == 100) {
reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_100M;
@ -521,13 +521,13 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
}
mtsdr(sdr_mfr, reg);
#endif
/* Set ZMII/RGMII speed according to the phy link speed */
reg = in32 (ZMII_SSR);
if ( (speed == 100) || (speed == 1000) )
out32 (ZMII_SSR, reg | (ZMII_SSR_SP << ZMII_SSR_V (devnum)));
else
out32 (ZMII_SSR,
reg & (~(ZMII_SSR_SP << ZMII_SSR_V (devnum))));
out32 (ZMII_SSR, reg & (~(ZMII_SSR_SP << ZMII_SSR_V (devnum))));
if ((devnum == 2) || (devnum == 3)) {
if (speed == 1000)
@ -541,7 +541,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
}
/* set the Mal configuration reg */
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000);
#else
@ -642,7 +642,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
switch (devnum) {
case 1:
/* setup MAL tx & rx channel pointers */
#if defined (CONFIG_440_EP) || defined (CONFIG_440_GR)
#if defined (CONFIG_440EP) || defined (CONFIG_440GR)
mtdcr (maltxctp2r, hw_p->tx);
#else
mtdcr (maltxctp1r, hw_p->tx);
@ -653,7 +653,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
/* set RX buffer size */
mtdcr (malrcbs1, ENET_MAX_MTU_ALIGNED / 16);
break;
#if defined (CONFIG_440_GX)
#if defined (CONFIG_440GX)
case 2:
/* setup MAL tx & rx channel pointers */
mtdcr (maltxbattr, 0x0);
@ -672,7 +672,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
/* set RX buffer size */
mtdcr (malrcbs3, ENET_MAX_MTU_ALIGNED / 16);
break;
#endif /*CONFIG_440_GX */
#endif /* CONFIG_440GX */
case 0:
default:
/* setup MAL tx & rx channel pointers */
@ -686,7 +686,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
}
/* Enable MAL transmit and receive channels */
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mtdcr (maltxcasr, (MAL_TXRX_CASR >> (hw_p->devnum*2)));
#else
mtdcr (maltxcasr, (MAL_TXRX_CASR >> hw_p->devnum));
@ -836,7 +836,7 @@ int enetInt (struct eth_device *dev)
unsigned long mal_rx_eob;
unsigned long my_uic0msr, my_uic1msr;
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
unsigned long my_uic2msr;
#endif
EMAC_440GX_HW_PST hw_p;
@ -856,7 +856,7 @@ int enetInt (struct eth_device *dev)
my_uic0msr = mfdcr (uic0msr);
my_uic1msr = mfdcr (uic1msr);
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
my_uic2msr = mfdcr (uic2msr);
#endif
if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
@ -866,7 +866,7 @@ int enetInt (struct eth_device *dev)
/* not for us */
return (rc);
}
#if defined (CONFIG_440_GX)
#if defined (CONFIG_440GX)
if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
&& !(my_uic2msr & (UIC_ETH2 | UIC_ETH3))) {
/* not for us */
@ -922,7 +922,7 @@ int enetInt (struct eth_device *dev)
return (rc); /* we had errors so get out */
}
}
#if defined (CONFIG_440_GX)
#if defined (CONFIG_440GX)
if (hw_p->devnum == 2) {
if (UIC_ETH2 & my_uic2msr) { /* look for EMAC errors */
emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
@ -958,7 +958,7 @@ int enetInt (struct eth_device *dev)
return (rc); /* we had errors so get out */
}
}
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
/* handle MAX TX EOB interrupt from a tx */
if (my_uic0msr & UIC_MTE) {
mal_rx_eob = mfdcr (maltxeobisr);
@ -987,14 +987,14 @@ int enetInt (struct eth_device *dev)
case 1:
mtdcr (uic1sr, UIC_ETH1);
break;
#if defined (CONFIG_440_GX)
#if defined (CONFIG_440GX)
case 2:
mtdcr (uic2sr, UIC_ETH2);
break;
case 3:
mtdcr (uic2sr, UIC_ETH3);
break;
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
default:
break;
}
@ -1184,7 +1184,7 @@ int ppc_440x_eth_initialize (bd_t * bis)
int eth_num = 0;
EMAC_440GX_HW_PST hw = NULL;
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
unsigned long pfc1;
mfsdr (sdr_pfc1, pfc1);
@ -1197,7 +1197,7 @@ int ppc_440x_eth_initialize (bd_t * bis)
#if defined(CONFIG_PHY1_ADDR)
bis->bi_phynum[1] = CONFIG_PHY1_ADDR;
#endif
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
bis->bi_phynum[2] = CONFIG_PHY2_ADDR;
bis->bi_phynum[3] = CONFIG_PHY3_ADDR;
bis->bi_phymode[0] = 0;
@ -1205,7 +1205,7 @@ int ppc_440x_eth_initialize (bd_t * bis)
bis->bi_phymode[2] = 2;
bis->bi_phymode[3] = 2;
#if defined (CONFIG_440_GX)
#if defined (CONFIG_440GX)
ppc_440x_eth_setup_bridge(0, bis);
#endif
#endif

2
cpu/ppc4xx/cpu.c
View File

@ -178,7 +178,7 @@ int checkcpu (void)
case PVR_440GX_RC:
puts("GX Rev. C");
break;
#if defined(CONFIG_440_GR)
#if defined(CONFIG_440GR)
case PVR_440EP_RA:
puts("GR Rev. A");
break;

2
cpu/ppc4xx/cpu_init.c
View File

@ -188,7 +188,7 @@ cpu_init_f (void)
unsigned long val;
val = mfspr(tcr);
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
val |= 0xb8000000; /* generate system reset after 1.34 seconds */
#else
val |= 0xf0000000; /* generate system reset after 2.684 seconds */

44
cpu/ppc4xx/interrupts.c
View File

@ -54,12 +54,12 @@ static struct irq_action irq_vecs1[32]; /* For UIC1 */
void uic1_interrupt( void * parms); /* UIC1 handler */
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
static struct irq_action irq_vecs2[32]; /* For UIC2 */
void uic0_interrupt( void * parms); /* UIC0 handler */
void uic2_interrupt( void * parms); /* UIC2 handler */
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
#endif /* CONFIG_440 */
@ -115,11 +115,11 @@ int interrupt_init_cpu (unsigned *decrementer_count)
irq_vecs1[vec].handler = NULL;
irq_vecs1[vec].arg = NULL;
irq_vecs1[vec].count = 0;
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
irq_vecs2[vec].handler = NULL;
irq_vecs2[vec].arg = NULL;
irq_vecs2[vec].count = 0;
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
#endif
}
@ -162,14 +162,14 @@ int interrupt_init_cpu (unsigned *decrementer_count)
set_evpr(0x00000000);
#if defined(CONFIG_440)
#if !defined(CONFIG_440_GX)
#if !defined(CONFIG_440GX)
/* Install the UIC1 handlers */
irq_install_handler(VECNUM_UIC1NC, uic1_interrupt, 0);
irq_install_handler(VECNUM_UIC1C, uic1_interrupt, 0);
#endif
#endif
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
/* Take the GX out of compatibility mode
* Travis Sawyer, 9 Mar 2004
* NOTE: 440gx user manual inconsistency here
@ -195,7 +195,7 @@ int interrupt_init_cpu (unsigned *decrementer_count)
/*
* Handle external interrupts
*/
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
void external_interrupt(struct pt_regs *regs)
{
ulong uic_msr;
@ -219,7 +219,7 @@ void external_interrupt(struct pt_regs *regs)
return;
} /* external_interrupt CONFIG_440_GX */
} /* external_interrupt CONFIG_440GX */
#else
@ -266,7 +266,7 @@ void external_interrupt(struct pt_regs *regs)
}
#endif
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
/* Handler for UIC0 interrupt */
void uic0_interrupt( void * parms)
{
@ -310,7 +310,7 @@ void uic0_interrupt( void * parms)
}
}
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
#if defined(CONFIG_440)
/* Handler for UIC1 interrupt */
@ -357,7 +357,7 @@ void uic1_interrupt( void * parms)
}
#endif /* defined(CONFIG_440) */
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
/* Handler for UIC1 interrupt */
void uic2_interrupt( void * parms)
{
@ -400,7 +400,7 @@ void uic2_interrupt( void * parms)
vec++;
}
}
#endif /* defined(CONFIG_440_GX) */
#endif /* defined(CONFIG_440GX) */
/****************************************************************************/
@ -414,7 +414,7 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
int i = vec;
#if defined(CONFIG_440)
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
if ((vec > 31) && (vec < 64)) {
i = vec - 32;
irqa = irq_vecs1;
@ -422,12 +422,12 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
i = vec - 64;
irqa = irq_vecs2;
}
#else /* CONFIG_440_GX */
#else /* CONFIG_440GX */
if (vec > 31) {
i = vec - 32;
irqa = irq_vecs1;
}
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
#endif /* CONFIG_440 */
/*
@ -441,13 +441,13 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
irqa[i].arg = arg;
#if defined(CONFIG_440)
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
if ((vec > 31) && (vec < 64))
mtdcr (uic1er, mfdcr (uic1er) | (0x80000000 >> i));
else if (vec > 63)
mtdcr (uic2er, mfdcr (uic2er) | (0x80000000 >> i));
else
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
if (vec > 31)
mtdcr (uic1er, mfdcr (uic1er) | (0x80000000 >> i));
else
@ -464,7 +464,7 @@ void irq_free_handler (int vec)
int i = vec;
#if defined(CONFIG_440)
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
if ((vec > 31) && (vec < 64)) {
irqa = irq_vecs1;
i = vec - 32;
@ -472,7 +472,7 @@ void irq_free_handler (int vec)
irqa = irq_vecs2;
i = vec - 64;
}
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
if (vec > 31) {
irqa = irq_vecs1;
i = vec - 32;
@ -485,13 +485,13 @@ void irq_free_handler (int vec)
#endif
#if defined(CONFIG_440)
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
if ((vec > 31) && (vec < 64))
mtdcr (uic1er, mfdcr (uic1er) & ~(0x80000000 >> i));
else if (vec > 63)
mtdcr (uic2er, mfdcr (uic2er) & ~(0x80000000 >> i));
else
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
if (vec > 31)
mtdcr (uic1er, mfdcr (uic1er) & ~(0x80000000 >> i));
else
@ -553,7 +553,7 @@ do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
printf("\n");
#endif
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
printf ("\nUIC 2\n");
printf ("Nr Routine Arg Count\n");

8
cpu/ppc4xx/miiphy_440.c
View File

@ -165,13 +165,13 @@ int miiphy_read (unsigned char addr, unsigned char reg, unsigned short *value)
}
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
sta_reg |= EMAC_STACR_READ;
#else
sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ;
#endif
#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440_GX)
#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX)
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
#endif
sta_reg = sta_reg | (addr << 5); /* Phy address */
@ -225,13 +225,13 @@ int miiphy_write (unsigned char addr, unsigned char reg, unsigned short value)
sta_reg = 0;
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
sta_reg |= EMAC_STACR_WRITE;
#else
sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ;
#endif
#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440_GX)
#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX)
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */
#endif
sta_reg = sta_reg | ((unsigned long) addr << 5); /* Phy address */

20
cpu/ppc4xx/serial.c
View File

@ -269,14 +269,14 @@ int serial_tstc ()
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405EP)
#if defined(CONFIG_440)
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300
#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400
#else
#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000200
#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000300
#endif
#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define CR0_MASK 0xdfffffff
#define CR0_EXTCLK_ENA 0x00800000
#define CR0_UDIV_POS 0
@ -284,7 +284,7 @@ int serial_tstc ()
#define CR0_MASK 0x3fff0000
#define CR0_EXTCLK_ENA 0x00600000
#define CR0_UDIV_POS 16
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
#elif defined(CONFIG_405EP)
#define UART0_BASE 0xef600300
#define UART1_BASE 0xef600400
@ -306,17 +306,17 @@ int serial_tstc ()
#if defined(CONFIG_UART1_CONSOLE)
#define ACTING_UART0_BASE UART1_BASE
#define ACTING_UART1_BASE UART0_BASE
#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define UART0_SDR sdr_uart1
#define UART1_SDR sdr_uart0
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
#else
#define ACTING_UART0_BASE UART0_BASE
#define ACTING_UART1_BASE UART1_BASE
#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define UART0_SDR sdr_uart0
#define UART1_SDR sdr_uart1
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
#endif
#if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK)
@ -436,7 +436,7 @@ int serial_init(void)
unsigned long tmp;
#endif
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
#if defined(CONFIG_SERIAL_MULTI)
if (UART0_BASE == dev_base) {
mfsdr(UART0_SDR,reg);
@ -451,7 +451,7 @@ int serial_init(void)
#endif
#else
reg = mfdcr(cntrl0) & ~CR0_MASK;
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
#ifdef CFG_EXT_SERIAL_CLOCK
reg |= CR0_EXTCLK_ENA;
udiv = 1;
@ -465,7 +465,7 @@ int serial_init(void)
serial_divs (gd->baudrate, &udiv, &bdiv);
#endif
#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
reg |= udiv << CR0_UDIV_POS; /* set the UART divisor */
#if defined(CONFIG_SERIAL_MULTI)
if (UART0_BASE == dev_base) {

2
cpu/ppc4xx/spd_sdram.c
View File

@ -734,7 +734,7 @@ long int spd_sdram(void) {
*/
check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
/*
* Soft-reset SDRAM controller.
*/

4
cpu/ppc4xx/speed.c
View File

@ -195,7 +195,7 @@ ulong get_PCI_freq (void)
#elif defined(CONFIG_440)
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
void get_sys_info (sys_info_t *sysInfo)
{
unsigned long temp;
@ -283,7 +283,7 @@ ulong get_PCI_freq (void)
return sys_info.freqPCI;
}
#elif !defined(CONFIG_440_GX)
#elif !defined(CONFIG_440GX)
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;

18
cpu/ppc4xx/start.S
View File

@ -166,7 +166,7 @@ _start_440:
mtspr srr1,r0
mtspr csrr0,r0
mtspr csrr1,r0
#if defined (CONFIG_440_GX) /* NOTE: 440GX adds machine check status regs */
#if defined (CONFIG_440GX) /* NOTE: 440GX adds machine check status regs */
mtspr mcsrr0,r0
mtspr mcsrr1,r0
mfspr r1, mcsr
@ -340,11 +340,11 @@ _start:
mtspr tcr,r0 /* disable all */
mtspr esr,r0 /* clear exception syndrome register */
mtxer r0 /* clear integer exception register */
#if !defined(CONFIG_440_GX)
#if !defined(CONFIG_440GX)
lis r1,0x0002 /* set CE bit (Critical Exceptions) */
ori r1,r1,0x1000 /* set ME bit (Machine Exceptions) */
mtmsr r1 /* change MSR */
#elif !defined(CONFIG_440_EP) && !defined(CONFIG_440_GR)
#elif !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
bl __440gx_msr_set
b __440gx_msr_continue
@ -377,7 +377,7 @@ __440gx_msr_continue:
/* Setup the internal SRAM */
/*----------------------------------------------------------------*/
li r0,0
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
/* Clear Dcache to use as RAM */
addis r3,r0,CFG_INIT_RAM_ADDR@h
ori r3,r3,CFG_INIT_RAM_ADDR@l
@ -394,7 +394,7 @@ __440gx_msr_continue:
addi r3,r3,32
bdnz ..d_ag
#else
#if defined (CONFIG_440_GX)
#if defined (CONFIG_440GX)
mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */
#endif
mtdcr isram0_sb1cr,r0 /* Disable bank 1 */
@ -409,7 +409,7 @@ __440gx_msr_continue:
mtdcr isram0_pmeg,r1
lis r1,0x8000 /* BAS = 8000_0000 */
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
ori r1,r1,0x0980 /* first 64k */
mtdcr isram0_sb0cr,r1
lis r1,0x8001
@ -975,7 +975,7 @@ invalidate_icache:
invalidate_dcache:
addi r6,0,0x0000 /* clear GPR 6 */
/* Do loop for # of dcache congruence classes. */
#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
lis r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS for large sized cache */
ori r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
#else
@ -1001,7 +1001,7 @@ flush_dcache:
mtdccr r10
/* do loop for # of congruence classes. */
#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
lis r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS: for large cache sizes */
ori r10,r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
lis r11,(CFG_DCACHE_SIZE / 2)@ha /* D cache set size - 2 way sets */
@ -1228,7 +1228,7 @@ ppcSync:
*/
.globl relocate_code
relocate_code:
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
dccci 0,0 /* Invalidate data cache, now no longer our stack */
sync
addi r1,r0,0x0000 /* Tlb entry #0 */

2
cpu/ppc4xx/usb_ohci.c
View File

@ -76,7 +76,7 @@
#define m16_swap(x) swap_16(x)
#define m32_swap(x) swap_32(x)
#ifdef CONFIG_440_EP
#ifdef CONFIG_440EP
#define ohci_cpu_to_le16(x) (x)
#define ohci_cpu_to_le32(x) (x)
#else

4
cpu/ppc4xx/usbdev.c
View File

@ -3,7 +3,7 @@
#include <common.h>
#include <asm/processor.h>
#ifdef CONFIG_440_EP
#ifdef CONFIG_440EP
#include <usb.h>
#include "usbdev.h"
@ -211,4 +211,4 @@ void usb_dev_init()
NULL);
}
#endif /*CONFIG_440_EP */
#endif /*CONFIG_440EP */

4
drivers/cfi_flash.c
View File

@ -557,7 +557,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
i = buffered_size > cnt ? cnt : buffered_size;
if ((rc = flash_write_cfibuffer (info, wp, src, i)) != ERR_OK)
return rc;
i -= (i % info->portwidth);
i -= i & (info->portwidth - 1);
wp += i;
src += i;
cnt -= i;
@ -805,7 +805,7 @@ static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf)
uchar *cp = (uchar *) cmdbuf;
for (i = 0; i < info->portwidth; i++)
*cp++ = ((i + 1) % info->chipwidth) ? '\0' : cmd;
*cp++ = ((i + 1) & (info->chipwidth - 1)) ? '\0' : cmd;
#if defined(__LITTLE_ENDIAN)
switch (info->portwidth) {
case FLASH_CFI_8BIT:

2
drivers/pci_indirect.c
View File

@ -52,7 +52,7 @@ indirect_##rw##_config_##size(struct pci_controller *hose, \
cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
return 0; \
}
#elif defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define INDIRECT_PCI_OP(rw, size, type, op, mask) \
static int \
indirect_##rw##_config_##size(struct pci_controller *hose, \

6
fs/jffs2/jffs2_1pass.c
View File

@ -278,13 +278,13 @@ static inline void *get_node_mem_nor(u32 off)
/*
* Generic jffs2 raw memory and node read routines.
* Generic jffs2 raw memory and node read routines.
*
*/
static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf)
{
struct mtdids *id = current_part->dev->id;
#if (CONFIG_COMMANDS & CFG_CMD_FLASH)
if (id->type == MTD_DEV_TYPE_NOR)
return get_fl_mem_nor(off);
@ -302,7 +302,7 @@ static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf)
static inline void *get_node_mem(u32 off)
{
struct mtdids *id = current_part->dev->id;
#if (CONFIG_COMMANDS & CFG_CMD_FLASH)
if (id->type == MTD_DEV_TYPE_NOR)
return get_node_mem_nor(off);

4
include/405gp_enet.h
View File

@ -67,7 +67,7 @@ struct arp_entry {
/*Register addresses */
#if defined(CONFIG_440)
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00)
#else
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780)
@ -81,7 +81,7 @@ struct arp_entry {
#endif /* CONFIG_440 */
#if defined(CONFIG_440)
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00)
#else
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)

4
include/440_i2c.h
View File

@ -1,11 +1,11 @@
#ifndef _440_i2c_h_
#define _440_i2c_h_
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700)
#else
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400)
#endif /*CONFIG_440_EP CONFIG_440_GR*/
#endif /*CONFIG_440EP CONFIG_440GR*/
#define I2C_REGISTERS_BASE_ADDRESS I2C_BASE_ADDR
#define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF)

22
include/440gx_enet.h
View File

@ -130,9 +130,9 @@ typedef struct emac_440gx_hw_st {
} EMAC_440GX_HW_ST, *EMAC_440GX_HW_PST;
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
#define EMAC_NUM_DEV 4
#elif defined(CONFIG_440) && !defined(CONFIG_440_GX)
#elif defined(CONFIG_440) && !defined(CONFIG_440GX)
#define EMAC_NUM_DEV 2
#else
#warning Bad configuration
@ -140,7 +140,7 @@ typedef struct emac_440gx_hw_st {
/*ZMII Bridge Register addresses */
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00)
#else
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780)
@ -212,7 +212,7 @@ typedef struct emac_440gx_hw_st {
/*---------------------------------------------------------------------------+
| TCP/IP Acceleration Hardware (TAH) 440GX Only
+---------------------------------------------------------------------------*/
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
#define TAH_BASE (CFG_PERIPHERAL_BASE + 0x0B50)
#define TAH_REVID (TAH_BASE + 0x0) /* Revision ID (RO)*/
#define TAH_MR (TAH_BASE + 0x10) /* Mode Register (R/W) */
@ -272,11 +272,11 @@ typedef struct emac_440gx_hw_st {
#define TAH_TSR_TFPE (0x00080000) /* Transmit FIFO parity error */
#define TAH_TSR_SSTS (0x00040000) /* Segment size too small */
#define TAH_TSR_RSVD (0x0003FFFF) /* Reserved */
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
/* Ethernet MAC Regsiter Addresses */
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00)
#else
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)
@ -319,7 +319,7 @@ typedef struct emac_440gx_hw_st {
#define EMAC_M0_WKE (0x04000000)
/* on 440GX EMAC_MR1 has a different layout! */
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
/* MODE Reg 1 */
#define EMAC_M1_FDE (0x80000000)
#define EMAC_M1_ILE (0x40000000)
@ -349,7 +349,7 @@ typedef struct emac_440gx_hw_st {
#define EMAC_M1_OBCI_83 (0x00000010)
#define EMAC_M1_OBCI_66 (0x00000008)
#define EMAC_M1_RSVD1 (0x00000007)
#else /* defined(CONFIG_440_GX) */
#else /* defined(CONFIG_440GX) */
/* EMAC_MR1 is the same on 405GP, 405GPr, 405EP, 440GP, 440EP */
#define EMAC_M1_FDE 0x80000000
#define EMAC_M1_ILE 0x40000000
@ -369,10 +369,10 @@ typedef struct emac_440gx_hw_st {
#define EMAC_M1_TR0_MULTI 0x00008000
#define EMAC_M1_TR1_DEPEND 0x00004000
#define EMAC_M1_TR1_MULTI 0x00002000
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define EMAC_M1_JUMBO_ENABLE 0x00001000
#endif /* defined(CONFIG_440_EP) || defined(CONFIG_440_GR) */
#endif /* defined(CONFIG_440_GX) */
#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
#endif /* defined(CONFIG_440GX) */
/* Transmit Mode Register 0 */
#define EMAC_TXM0_GNP0 (0x80000000)

8
include/asm-ppc/u-boot.h
View File

@ -101,19 +101,19 @@ typedef struct bd_info {
unsigned char bi_enet3addr[6];
#endif
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440_GX) || \
defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440GX) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR)
unsigned int bi_opbfreq; /* OPB clock in Hz */
int bi_iic_fast[2]; /* Use fast i2c mode */
#endif
#if defined(CONFIG_NX823)
unsigned char bi_sernum[8];
#endif
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
int bi_phynum[2]; /* Determines phy mapping */
int bi_phymode[2]; /* Determines phy mode */
#endif
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
int bi_phynum[4]; /* Determines phy mapping */
int bi_phymode[4]; /* Determines phy mode */
#endif

2
include/configs/DU405.h
View File

@ -32,12 +32,14 @@
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_IDENT_STRING " $Name: $"
#define CONFIG_405GP 1 /* This is a PPC405 CPU */
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
#define CONFIG_DU405 1 /* ...on a DU405 board */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
#define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */

2
include/configs/NETTA.h
View File

@ -694,7 +694,7 @@
/* No command line, one static partition, whole device */
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV "nand0"
#define CONFIG_JFFS2_PART_SIZE 0x00100000
#define CONFIG_JFFS2_PART_SIZE 0x00100000
#define CONFIG_JFFS2_PART_OFFSET 0x00200000
/* mtdparts command line support */

1
include/configs/PCI405.h
View File

@ -32,6 +32,7 @@
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_IDENT_STRING " $Name: esd_PCI405_05_07_28 $"
#define CONFIG_405GP 1 /* This is a PPC405 CPU */
#define CONFIG_4xx 1 /* ...member of PPC4xx family */

1
include/configs/WUH405.h
View File

@ -32,6 +32,7 @@
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_IDENT_STRING " $Name: $"
#define CONFIG_405EP 1 /* This is a PPC405 CPU */
#define CONFIG_4xx 1 /* ...member of PPC4xx family */

2
include/configs/XPEDITE1K.h
View File

@ -36,7 +36,7 @@
#define CONFIG_XPEDITE1K 1 /* Board is XPedite 1000 */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_440 1
#define CONFIG_440_GX 1 /* 440 GX */
#define CONFIG_440GX 1 /* 440 GX */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */

401
include/configs/aev.h Normal file
View File

@ -0,0 +1,401 @@
/*
* (C) Copyright 2003-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2004-2005
* Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
#define CONFIG_TQM5200 1 /* ... on TQM5200 module */
#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */
#define CONFIG_STK52XX 1 /* ... on a STK52XX base board */
#define CONFIG_STK52XX_REV100 1 /* define for revision 100 baseboards */
#define CONFIG_AEVFIFO 1
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/*
* PCI Mapping:
* 0x40000000 - 0x4fffffff - PCI Memory
* 0x50000000 - 0x50ffffff - PCI IO Space
*/
#ifdef CONFIG_AEVFIFO
#define CONFIG_PCI 1
#define CONFIG_PCI_PNP 1
/* #define CONFIG_PCI_SCAN_SHOW 1 */
#define CONFIG_PCI_MEM_BUS 0x40000000
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE 0x10000000
#define CONFIG_PCI_IO_BUS 0x50000000
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x01000000
#define CONFIG_NET_MULTI 1
#define CONFIG_EEPRO100 1
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
#endif /* CONFIG_AEVFIFO */
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/* POST support */
#define CONFIG_POST (CFG_POST_MEMORY | \
CFG_POST_CPU | \
CFG_POST_I2C)
#ifdef CONFIG_POST
#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
/* preserve space for the post_word at end of on-chip SRAM */
#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
#else
#define CFG_CMD_POST_DIAG 0
#endif
/*
* Supported commands
*/
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
ADD_BMP_CMD | \
CFG_CMD_PCI | \
CFG_CMD_ASKENV | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_ECHO | \
CFG_CMD_EEPROM | \
CFG_CMD_I2C | \
CFG_CMD_MII | \
CFG_CMD_NFS | \
CFG_CMD_PING | \
CFG_CMD_POST_DIAG | \
CFG_CMD_REGINFO | \
CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_TIMESTAMP /* display image timestamps */
#if (TEXT_BASE == 0xFC000000) /* Boot low */
# define CFG_LOWBOOT 1
#endif
/*
* Autobooting
*/
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath) " \
"console=ttyS0,$(baudrate)\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
":$(hostname):$(netdev):off panic=1\0" \
"flash_self=run ramargs addip;" \
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
"flash_nfs=run nfsargs addip;" \
"bootm $(kernel_addr)\0" \
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"bootfile=/tftpboot/tqm5200/uImage\0" \
"load=tftp 200000 $(u-boot)\0" \
"u-boot=/tftpboot/tqm5200/u-boot.bin\0" \
"update=protect off FC000000 FC05FFFF;" \
"erase FC000000 FC05FFFF;" \
"cp.b 200000 FC000000 $(filesize);" \
"protect on FC000000 FC05FFFF\0" \
""
#define CONFIG_BOOTCOMMAND "run net_nfs"
/*
* IPB Bus clocking configuration.
*/
#define CFG_IPBSPEED_133 /* define for 133MHz speed */
#if defined(CFG_IPBSPEED_133)
/*
* PCI Bus clocking configuration
*
* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
* CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
* been tested with a IPB Bus Clock of 66 MHz.
*/
#define CFG_PCISPEED_66 /* define for 66MHz speed */
#endif
/*
* I2C configuration
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#ifdef CONFIG_TQM5200_REV100
#define CFG_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */
#else
#define CFG_I2C_MODULE 2 /* Select I2C module #2 for all other revs */
#endif
/*
* I2C clock frequency
*
* Please notice, that the resulting clock frequency could differ from the
* configured value. This is because the I2C clock is derived from system
* clock over a frequency divider with only a few divider values. U-boot
* calculates the best approximation for CFG_I2C_SPEED. However the calculated
* approximation allways lies below the configured value, never above.
*/
#define CFG_I2C_SPEED 100000 /* 100 kHz */
#define CFG_I2C_SLAVE 0x7F
/*
* EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
* also). For other EEPROMs configuration should be verified. On Mini-FAP the
* EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
* same configuration could be used.
*/
#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
#define CFG_I2C_EEPROM_ADDR_LEN 2
#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
/*
* Flash configuration
*/
#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */
/* use CFI flash driver if no module variant is spezified */
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */
#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */
#if !defined(CFG_LOWBOOT)
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000)
#else /* CFG_LOWBOOT */
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000)
#endif /* CFG_LOWBOOT */
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
(= chip selects) */
#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
/*
* Environment settings
*/
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 0x10000
#define CFG_ENV_SECT_SIZE 0x20000
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
/*
* Memory map
*/
#define CFG_MBAR 0xF0000000
#define CFG_SDRAM_BASE 0x00000000
#define CFG_DEFAULT_MBAR 0x80000000
/* Use ON-Chip SRAM until RAM will be available */
#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
#ifdef CONFIG_POST
/* preserve space for the post_word at end of on-chip SRAM */
#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
#else
#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
#endif
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_BASE TEXT_BASE
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
# define CFG_RAMBOOT 1
#endif
#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
/*
* Define CONFIG_FEC_10MBIT to force FEC at 10Mb
*/
/* #define CONFIG_FEC_10MBIT 1 */
#define CONFIG_PHY_ADDR 0x00
/*
* GPIO configuration
*
* use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1):
* Bit 0 (mask: 0x80000000): 1
* use ALT CAN position: Bits 2-3 (mask: 0x30000000):
* 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
* 01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
* Use for REV200 STK52XX boards. Do not use with REV100 modules
* (because, there I2C1 is used as I2C bus)
* use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
* use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
* 000 -> All PSC2 pins are GIOPs
* 001 -> CAN1/2 on PSC2 pins
* Use for REV100 STK52xx boards
* use PSC6:
* on STK52xx:
* use as UART. Pins PSC6_0 to PSC6_3 are used.
* Bits 9:11 (mask: 0x00700000):
* 101 -> PSC6 : Extended POST test is not available
* on MINI-FAP and TQM5200_IB:
* use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):
* 000 -> PSC6 could not be used as UART, CODEC or IrDA
* GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
* tests.
*/
#define CFG_GPS_PORT_CONFIG 0x81500014
/*
* RTC configuration
*/
#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
/* Enable an alternate, more extensive memory test */
#define CFG_ALT_MEMTEST
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
/*
* Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
* which is normally part of the default commands (CFV_CMD_DFL)
*/
#define CONFIG_LOOPW
/*
* Various low-level settings
*/
#if defined(CONFIG_MPC5200)
#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
#define CFG_HID0_FINAL HID0_ICE
#else
#define CFG_HID0_INIT 0
#define CFG_HID0_FINAL 0
#endif
#define CFG_BOOTCS_START CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
#ifdef CFG_PCISPEED_66
#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
#else
#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
#endif
#define CFG_CS0_START CFG_FLASH_BASE
#define CFG_CS0_SIZE CFG_FLASH_SIZE
/* automatic configuration of chip selects */
#ifdef CONFIG_CS_AUTOCONF
#define CONFIG_LAST_STAGE_INIT
#endif
/*
* SRAM - Do not map below 2 GB in address space, because this area is used
* for SDRAM autosizing.
*/
#define CFG_CS2_START 0xE5000000
#define CFG_CS2_SIZE 0x80000 /* 512 kByte */
#define CFG_CS2_CFG 0x0004D930
/*
* Grafic controller - Do not map below 2 GB in address space, because this
* area is used for SDRAM autosizing.
*/
#define SM501_FB_BASE 0xE0000000
#define CFG_CS1_START (SM501_FB_BASE)
#define CFG_CS1_SIZE 0x4000000 /* 64 MByte */
#define CFG_CS1_CFG 0x8F48FF70
#define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000
#define CFG_CS_BURST 0x00000000
#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */
#define CFG_RESET_ADDRESS 0xff000000
#endif /* __CONFIG_H */

144
include/configs/bamboo.h
View File

@ -31,12 +31,19 @@
* High Level Configuration Options
*----------------------------------------------------------------------*/
#define CONFIG_BAMBOO 1 /* Board is BAMBOO */
#define CONFIG_440_EP 1 /* Specific PPC440EP support */
#define CONFIG_440EP 1 /* Specific PPC440EP support */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
/*
* Please note that, if NAND support is enabled, the 2nd ethernet port
* can't be used because of pin multiplexing. So, if you want to use the
* 2nd ethernet port you have to "undef" the following define.
*/
#define CONFIG_BAMBOO_NAND 1 /* enable nand flash support */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
@ -58,13 +65,15 @@
#define CFG_USB_DEVICE 0x50000000
#define CFG_NVRAM_BASE_ADDR 0x80000000
#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000)
#define CFG_BOOT_BASE_ADDR 0xf0000000
#define CFG_NAND_ADDR 0x90000000
#define CFG_NAND2_ADDR 0x94000000
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */
#define CFG_INIT_RAM_END 0x1000
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (8 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
@ -88,7 +97,7 @@
* The DS1558 code assumes this condition
*
*----------------------------------------------------------------------*/
#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
/*-----------------------------------------------------------------------
@ -118,21 +127,80 @@
#define CFG_FLASH_ADDR1 0x2aa
#define CFG_FLASH_WORD_SIZE unsigned char
#define CFG_FLASH_2ND_16BIT_DEV 1 /* bamboo has 8 and 16bit device */
#define CFG_FLASH_2ND_ADDR 0x87800000 /* bamboo has 8 and 16bit device */
#define CFG_FLASH_2ND_16BIT_DEV 1 /* bamboo has 8 and 16bit device */
#define CFG_FLASH_2ND_ADDR 0x87800000 /* bamboo has 8 and 16bit device */
#ifdef CFG_ENV_IS_IN_FLASH
#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
#if 0 /* test-only */
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#endif
#endif /* CFG_ENV_IS_IN_FLASH */
/*-----------------------------------------------------------------------
* NAND-FLASH related
*----------------------------------------------------------------------*/
#define NAND_CMD_REG (0x00) /* NandFlash Command Register */
#define NAND_ADDR_REG (0x04) /* NandFlash Address Register */
#define NAND_DATA_REG (0x08) /* NandFlash Data Register */
#define NAND_ECC0_REG (0x10) /* NandFlash ECC Register0 */
#define NAND_ECC1_REG (0x14) /* NandFlash ECC Register1 */
#define NAND_ECC2_REG (0x18) /* NandFlash ECC Register2 */
#define NAND_ECC3_REG (0x1C) /* NandFlash ECC Register3 */
#define NAND_ECC4_REG (0x20) /* NandFlash ECC Register4 */
#define NAND_ECC5_REG (0x24) /* NandFlash ECC Register5 */
#define NAND_ECC6_REG (0x28) /* NandFlash ECC Register6 */
#define NAND_ECC7_REG (0x2C) /* NandFlash ECC Register7 */
#define NAND_CR0_REG (0x30) /* NandFlash Device Bank0 Config Register */
#define NAND_CR1_REG (0x34) /* NandFlash Device Bank1 Config Register */
#define NAND_CR2_REG (0x38) /* NandFlash Device Bank2 Config Register */
#define NAND_CR3_REG (0x3C) /* NandFlash Device Bank3 Config Register */
#define NAND_CCR_REG (0x40) /* NandFlash Core Configuration Register */
#define NAND_STAT_REG (0x44) /* NandFlash Device Status Register */
#define NAND_HWCTL_REG (0x48) /* NandFlash Direct Hwd Control Register */
#define NAND_REVID_REG (0x50) /* NandFlash Core Revision Id Register */
/* Nand Flash K9F1208U0A Command Set => Nand Flash 0 */
#define NAND0_CMD_READ1_HALF1 0x00 /* Starting addr for 1rst half of registers */
#define NAND0_CMD_READ1_HALF2 0x01 /* Starting addr for 2nd half of registers */
#define NAND0_CMD_READ2 0x50
#define NAND0_CMD_READ_ID 0x90
#define NAND0_CMD_READ_STATUS 0x70
#define NAND0_CMD_RESET 0xFF
#define NAND0_CMD_PAGE_PROG 0x80
#define NAND0_CMD_PAGE_PROG_TRUE 0x10
#define NAND0_CMD_PAGE_PROG_DUMMY 0x11
#define NAND0_CMD_BLOCK_ERASE 0x60
#define NAND0_CMD_BLOCK_ERASE_END 0xD0
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define SECTORSIZE 512
#define ADDR_COLUMN 1
#define ADDR_PAGE 2
#define ADDR_COLUMN_PAGE 3
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
#define NAND_MAX_CHIPS 1
#define WRITE_NAND_COMMAND(d, adr) do {*(volatile u8 *)((ulong)adr+NAND_CMD_REG) = d;} while(0)
#define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u8 *)((ulong)adr+NAND_ADDR_REG) = d;} while(0)
#define WRITE_NAND(d, adr) do {*(volatile u8 *)((ulong)adr+NAND_DATA_REG) = d;} while(0)
#define READ_NAND(adr) (*(volatile u8 *)((ulong)adr+NAND_DATA_REG))
#define NAND_WAIT_READY(nand) while (!(*(volatile u8 *)((ulong)nand->IO_ADDR+NAND_STAT_REG) & 0x01))
/* not needed with 440EP NAND controller */
#define NAND_CTL_CLRALE(nandptr)
#define NAND_CTL_SETALE(nandptr)
#define NAND_CTL_CLRCLE(nandptr)
#define NAND_CTL_SETCLE(nandptr)
#define NAND_DISABLE_CE(nand)
#define NAND_ENABLE_CE(nand)
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------------- */
@ -206,10 +274,14 @@
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_NET_MULTI 1 /* required for netconsole */
#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
#ifndef CONFIG_BAMBOO_NAND
#define CONFIG_NET_MULTI 1 /* required for netconsole */
#define CONFIG_PHY1_ADDR 1
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
#endif /* CONFIG_BAMBOO_NAND */
#define CONFIG_NO_PHY_RESET 1 /* no PHY reset on bamboo!!! */
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
@ -219,17 +291,24 @@
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#ifdef CONFIG_440_EP
#ifdef CONFIG_440EP
/* USB */
#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE
/*Comment this out to enable USB 1.1 device*/
#define USB_2_0_DEVICE
#endif /*CONFIG_440_EP*/
#endif /*CONFIG_440EP*/
#ifdef CONFIG_BAMBOO_NAND
#define _CFG_CMD_NAND CFG_CMD_NAND
#else
#define _CFG_CMD_NAND 0
#endif /* CONFIG_BAMBOO_NAND */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_EEPROM | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
@ -244,6 +323,7 @@
CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
CFG_CMD_USB | \
_CFG_CMD_NAND | \
CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@ -253,42 +333,42 @@
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CONFIG_LYNXKDI 1 /* support kdi files */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CONFIG_LYNXKDI 1 /* support kdi files */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
#define CONFIG_PCI /* include pci support */
#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
/* Board-specific PCI */
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT
#define CFG_PCI_MASTER_INIT
#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data
@ -300,7 +380,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CFG_DCACHE_SIZE 32768 /* For IBM 440 CPUs */
#define CFG_DCACHE_SIZE (32<<10) /* For IBM 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */

6
include/configs/bubinga.h
View File

@ -127,6 +127,10 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
#define CONFIG_HAS_ETH1
#define CONFIG_PHY1_ADDR 2 /* EMAC1 PHY address */
#define CONFIG_NET_MULTI 1
#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Bubinga */
@ -199,8 +203,6 @@
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
/*-----------------------------------------------------------------------
* I2C stuff
*-----------------------------------------------------------------------

2
include/configs/hmi1001.h
View File

@ -287,6 +287,8 @@
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
#define CONFIG_IDE_PREINIT 1
#define CFG_ATA_IDE0_OFFSET 0x0000
#define CFG_ATA_BASE_ADDR MPC5XXX_ATA

2
include/configs/ocotea.h
View File

@ -40,7 +40,7 @@
* High Level Configuration Options
*----------------------------------------------------------------------*/
#define CONFIG_OCOTEA 1 /* Board is ebony */
#define CONFIG_440_GX 1 /* Specifc GX support */
#define CONFIG_440GX 1 /* Specifc GX support */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#undef CFG_DRAM_TEST /* Disable-takes long time! */

548
include/configs/spieval.h Normal file
View File

@ -0,0 +1,548 @@
/*
* (C) Copyright 2003-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2004-2005
* Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
#define CONFIG_TQM5200 1 /* ... on TQM5200 module */
#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */
#define CONFIG_STK52XX 1 /* ... on a STK52XX base board */
#define CONFIG_STK52XX_REV100 1 /* define for revision 100 baseboards */
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 6 /* console is on PSC6 */
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#ifdef CONFIG_STK52XX
#undef CONFIG_PS2KBD /* AT-PS/2 Keyboard */
#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */
#define CONFIG_PS2SERIAL 6 /* .. on PSC6 */
#define CONFIG_PS2MULT_DELAY (CFG_HZ/2) /* Initial delay */
#define CONFIG_BOARD_EARLY_INIT_R
#endif /* CONFIG_STK52XX */
/*
* PCI Mapping:
* 0x40000000 - 0x4fffffff - PCI Memory
* 0x50000000 - 0x50ffffff - PCI IO Space
*/
#ifdef CONFIG_STK52XX
#define CONFIG_PCI 1
#define CONFIG_PCI_PNP 1
/* #define CONFIG_PCI_SCAN_SHOW 1 */
#define CONFIG_PCI_MEM_BUS 0x40000000
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE 0x10000000
#define CONFIG_PCI_IO_BUS 0x50000000
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x01000000
#define CONFIG_NET_MULTI 1
#define CONFIG_EEPRO100 1
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
#endif /* CONFIG_STK52XX */
#ifdef CONFIG_PCI
#define ADD_PCI_CMD CFG_CMD_PCI
#else
#define ADD_PCI_CMD 0
#endif
/*
* Video console
*/
#if 1
#define CONFIG_VIDEO
#define CONFIG_VIDEO_SM501
#define CONFIG_VIDEO_SM501_32BPP
#define CONFIG_CFB_CONSOLE
#define CONFIG_VIDEO_LOGO
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_CONSOLE_EXTRA_INFO
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_SPLASH_SCREEN
#define CFG_CONSOLE_IS_IN_ENV
#endif
#ifdef CONFIG_VIDEO
#define ADD_BMP_CMD CFG_CMD_BMP
#else
#define ADD_BMP_CMD 0
#endif
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/* USB */
#ifdef CONFIG_STK52XX
#define CONFIG_USB_OHCI
#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
#else
#define ADD_USB_CMD 0
#endif
/* POST support */
#define CONFIG_POST (CFG_POST_MEMORY | \
CFG_POST_CPU | \
CFG_POST_I2C)
#ifdef CONFIG_POST
#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
/* preserve space for the post_word at end of on-chip SRAM */
#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
#else
#define CFG_CMD_POST_DIAG 0
#endif
/* IDE */
#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX)
#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
#else
#define ADD_IDE_CMD 0
#endif
/*
* Supported commands
*/
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
ADD_BMP_CMD | \
ADD_IDE_CMD | \
ADD_PCI_CMD | \
ADD_USB_CMD | \
CFG_CMD_ASKENV | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_ECHO | \
CFG_CMD_EEPROM | \
CFG_CMD_I2C | \
CFG_CMD_MII | \
CFG_CMD_NFS | \
CFG_CMD_PING | \
CFG_CMD_POST_DIAG | \
CFG_CMD_REGINFO | \
CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_TIMESTAMP /* display image timestamps */
#if (TEXT_BASE == 0xFC000000) /* Boot low */
# define CFG_LOWBOOT 1
#endif
/*
* Autobooting
*/
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#if defined (CONFIG_TQM5200_AA)
# define CONFIG_U_BOOT_SUFFIX "-AA\0"
#elif defined (CONFIG_TQM5200_AB)
# define CONFIG_U_BOOT_SUFFIX "-AB\0"
#elif defined (CONFIG_TQM5200_AC)
# define CONFIG_U_BOOT_SUFFIX "-AC\0"
#else
# define CONFIG_U_BOOT_SUFFIX "\0"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
":$(hostname):$(netdev):off panic=1\0" \
"flash_self=run ramargs addip;" \
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
"flash_nfs=run nfsargs addip;" \
"bootm $(kernel_addr)\0" \
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"bootfile=/tftpboot/tqm5200/uImage\0" \
"load=tftp 200000 $(u-boot)\0" \
"u-boot=/tftpboot/tqm5200/u-boot.bin" CONFIG_U_BOOT_SUFFIX \
"update=protect off FC000000 FC05FFFF;" \
"erase FC000000 FC05FFFF;" \
"cp.b 200000 FC000000 $(filesize);" \
"protect on FC000000 FC05FFFF\0" \
""
#define CONFIG_BOOTCOMMAND "run net_nfs"
/*
* IPB Bus clocking configuration.
*/
#define CFG_IPBSPEED_133 /* define for 133MHz speed */
#if defined(CFG_IPBSPEED_133)
/*
* PCI Bus clocking configuration
*
* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
* CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
* been tested with a IPB Bus Clock of 66 MHz.
*/
#define CFG_PCISPEED_66 /* define for 66MHz speed */
#endif
/*
* I2C configuration
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#ifdef CONFIG_TQM5200_REV100
#define CFG_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */
#else
#define CFG_I2C_MODULE 2 /* Select I2C module #2 for all other revs */
#endif
/*
* I2C clock frequency
*
* Please notice, that the resulting clock frequency could differ from the
* configured value. This is because the I2C clock is derived from system
* clock over a frequency divider with only a few divider values. U-boot
* calculates the best approximation for CFG_I2C_SPEED. However the calculated
* approximation allways lies below the configured value, never above.
*/
#define CFG_I2C_SPEED 100000 /* 100 kHz */
#define CFG_I2C_SLAVE 0x7F
/*
* EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
* also). For other EEPROMs configuration should be verified. On Mini-FAP the
* EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
* same configuration could be used.
*/
#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
#define CFG_I2C_EEPROM_ADDR_LEN 2
#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
/*
* HW-Monitor configuration on Mini-FAP
*/
#if defined (CONFIG_MINIFAP)
#define CFG_I2C_HWMON_ADDR 0x2C
#endif
/* List of I2C addresses to be verified by POST */
#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB)
#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \
CFG_I2C_SLAVE }
#elif defined (CONFIG_TQM5200_AC)
#define I2C_ADDR_LIST { CFG_I2C_SLAVE }
#endif
#if defined (CONFIG_MINIFAP)
#undef I2C_ADDR_LIST
#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \
CFG_I2C_HWMON_ADDR, \
CFG_I2C_SLAVE }
#endif
/*
* Flash configuration
*/
#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */
/* use CFI flash driver if no module variant is spezified */
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */
#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */
#if !defined(CFG_LOWBOOT)
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000)
#else /* CFG_LOWBOOT */
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000)
#endif /* CFG_LOWBOOT */
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
(= chip selects) */
#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
/*
* Environment settings
*/
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 0x10000
#define CFG_ENV_SECT_SIZE 0x20000
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
/*
* Memory map
*/
#define CFG_MBAR 0xF0000000
#define CFG_SDRAM_BASE 0x00000000
#define CFG_DEFAULT_MBAR 0x80000000
/* Use ON-Chip SRAM until RAM will be available */
#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
#ifdef CONFIG_POST
/* preserve space for the post_word at end of on-chip SRAM */
#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
#else
#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
#endif
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_BASE TEXT_BASE
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
# define CFG_RAMBOOT 1
#endif
#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
/*
* Define CONFIG_FEC_10MBIT to force FEC at 10Mb
*/
/* #define CONFIG_FEC_10MBIT 1 */
#define CONFIG_PHY_ADDR 0x00
/*
* GPIO configuration
*
* use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1):
* Bit 0 (mask: 0x80000000): 1
* use ALT CAN position: Bits 2-3 (mask: 0x30000000):
* 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
* 01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
* Use for REV200 STK52XX boards. Do not use with REV100 modules
* (because, there I2C1 is used as I2C bus)
* use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
* use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
* 000 -> All PSC2 pins are GIOPs
* 001 -> CAN1/2 on PSC2 pins
* Use for REV100 STK52xx boards
* use PSC6:
* on STK52xx:
* use as UART. Pins PSC6_0 to PSC6_3 are used.
* Bits 9:11 (mask: 0x00700000):
* 101 -> PSC6 : Extended POST test is not available
* on MINI-FAP and TQM5200_IB:
* use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):
* 000 -> PSC6 could not be used as UART, CODEC or IrDA
* GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
* tests.
*/
#if defined (CONFIG_MINIFAP)
# define CFG_GPS_PORT_CONFIG 0x91000004
#elif defined (CONFIG_STK52XX)
# if defined (CONFIG_STK52XX_REV100)
# define CFG_GPS_PORT_CONFIG 0x81500014
# else /* STK52xx REV200 and above */
# if defined (CONFIG_TQM5200_REV100)
# error TQM5200 REV100 not supported on STK52XX REV200 or above
# else/* TQM5200 REV200 and above */
# define CFG_GPS_PORT_CONFIG 0x91500004
# endif
# endif
#else /* TMQ5200 Inbetriebnahme-Board */
# define CFG_GPS_PORT_CONFIG 0x81000004
#endif
/*
* RTC configuration
*/
#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
/* Enable an alternate, more extensive memory test */
#define CFG_ALT_MEMTEST
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
/*
* Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
* which is normally part of the default commands (CFV_CMD_DFL)
*/
#define CONFIG_LOOPW
/*
* Various low-level settings
*/
#if defined(CONFIG_MPC5200)
#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
#define CFG_HID0_FINAL HID0_ICE
#else
#define CFG_HID0_INIT 0
#define CFG_HID0_FINAL 0
#endif
#define CFG_BOOTCS_START CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
#ifdef CFG_PCISPEED_66
#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
#else
#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
#endif
#define CFG_CS0_START CFG_FLASH_BASE
#define CFG_CS0_SIZE CFG_FLASH_SIZE
/* automatic configuration of chip selects */
#ifdef CONFIG_CS_AUTOCONF
#define CONFIG_LAST_STAGE_INIT
#endif
/*
* SRAM - Do not map below 2 GB in address space, because this area is used
* for SDRAM autosizing.
*/
#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF)
#define CFG_CS2_START 0xE5000000
#ifdef CONFIG_TQM5200_AB
#define CFG_CS2_SIZE 0x80000 /* 512 kByte */
#else /* CONFIG_CS_AUTOCONF */
#define CFG_CS2_SIZE 0x100000 /* 1 MByte */
#endif
#define CFG_CS2_CFG 0x0004D930
#endif
/*
* Grafic controller - Do not map below 2 GB in address space, because this
* area is used for SDRAM autosizing.
*/
#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \
defined (CONFIG_CS_AUTOCONF)
#define SM501_FB_BASE 0xE0000000
#define CFG_CS1_START (SM501_FB_BASE)
#define CFG_CS1_SIZE 0x4000000 /* 64 MByte */
#define CFG_CS1_CFG 0x8F48FF70
#define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000
#endif
#define CFG_CS_BURST 0x00000000
#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */
#define CFG_RESET_ADDRESS 0xff000000
/*-----------------------------------------------------------------------
* USB stuff
*-----------------------------------------------------------------------
*/
#define CONFIG_USB_CLOCK 0x0001BBBB
#define CONFIG_USB_CONFIG 0x00001000
/*-----------------------------------------------------------------------
* IDE/ATA stuff Supports IDE harddisk
*-----------------------------------------------------------------------
*/
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
#undef CONFIG_IDE_LED /* LED for ide not supported */
#define CONFIG_IDE_RESET /* reset for ide supported */
#define CONFIG_IDE_PREINIT
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
#define CFG_ATA_IDE0_OFFSET 0x0000
#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
/* Offset for data I/O */
#define CFG_ATA_DATA_OFFSET (0x0060)
/* Offset for normal register accesses */
#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
/* Offset for alternate registers */
#define CFG_ATA_ALT_OFFSET (0x005C)
/* Interval between registers */
#define CFG_ATA_STRIDE 4
#endif /* __CONFIG_H */

8
include/configs/yellowstone.h
View File

@ -29,7 +29,7 @@
* High Level Configuration Options
*----------------------------------------------------------------------*/
#define CONFIG_YELLOWSTONE 1 /* Board is BAMBOO */
#define CONFIG_440_GR 1 /* Specific PPC440GR support */
#define CONFIG_440GR 1 /* Specific PPC440GR support */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
@ -161,14 +161,14 @@
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#ifdef CONFIG_440_EP
#ifdef CONFIG_440EP
/* USB */
#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE
/*Comment this out to enable USB 1.1 device*/
#define USB_2_0_DEVICE
#endif /*CONFIG_440_EP*/
#endif /*CONFIG_440EP*/
#ifdef DEBUG
#define CONFIG_PANIC_HANG
@ -176,7 +176,7 @@
#define CONFIG_HW_WATCHDOG /* watchdog */
#endif
#ifdef CONFIG_440_EP
#ifdef CONFIG_440EP
/* Need to define POST */
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
CFG_CMD_DATE | \

276
include/configs/yosemite.h
View File

@ -1,4 +1,6 @@
/*
* (C) Copyright 2005
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
@ -28,56 +30,53 @@
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
#define CONFIG_YOSEMITE 1 /* Board is BAMBOO */
#define CONFIG_440_EP 1 /* Specific PPC440EP support */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#undef CFG_DRAM_TEST /* disable - takes long time! */
#define CONFIG_YOSEMITE 1 /* Board is Yosemite */
#define CONFIG_440EP 1 /* Specific PPC440EP support */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH */
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory */
#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/
#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
/*Don't change either of these*/
#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs */
#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals*/
#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs*/
/*Don't change either of these*/
#define CFG_USB_DEVICE 0x50000000
#define CFG_NVRAM_BASE_ADDR 0x80000000
#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000)
#define CFG_USB_DEVICE 0x50000000
#define CFG_NVRAM_BASE_ADDR 0x80000000
#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000)
#define CFG_BOOT_BASE_ADDR 0xf0000000
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */
#define CFG_INIT_RAM_END 0x2000
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (8 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
#define CFG_SDRAM_BANKS (2)
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */
#define CONFIG_BAUDRATE 9600
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI 1
/*define this if you want console on UART1*/
#undef CONFIG_UART1_CONSOLE
@ -85,26 +84,21 @@
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
* NVRAM/RTC
*
* NOTE: The RTC registers are located at 0x7FFF0 - 0x7FFFF
* The DS1558 code assumes this condition
*
* Environment
*----------------------------------------------------------------------*/
#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
/*
* Define here the location of the environment variables (FLASH or EEPROM).
* Note: DENX encourages to use redundant environment in FLASH.
*/
#if 1
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#else
#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
#endif
/*-----------------------------------------------------------------------
* FLASH related
*----------------------------------------------------------------------*/
#if 1 /* test-only */
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
#define CFG_MAX_FLASH_SECT 256 /* sectors per device */
#undef CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 120000 /* Timeout for Flash Write (in ms) */
#else
#define CFG_FLASH_CFI /* The flash is CFI compatible */
#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */
@ -116,12 +110,24 @@
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#endif
#ifdef CFG_ENV_IS_IN_FLASH
#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#endif /* CFG_ENV_IS_IN_FLASH */
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
#define CFG_KBYTES_SDRAM (128 * 1024) /* 128MB */
#define CFG_SDRAM_BANKS (2)
/*-----------------------------------------------------------------------
* I2C
@ -131,58 +137,84 @@
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
#define CFG_ENV_IS_IN_EEPROM 1
/* Define to allow the user to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CFG_I2C_MULTI_EEPROMS
#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
#define CFG_ENV_OFFSET 0x0
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
#define CONFIG_BOOTCOMMAND "bootm 0xfe000000" /* autoboot command */
#define CONFIG_BOOTDELAY 3 /* disable autoboot */
#ifdef CFG_ENV_IS_IN_EEPROM
#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
#define CFG_ENV_OFFSET 0x0
#endif /* CFG_ENV_IS_IN_EEPROM */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=yosemite\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
":$(hostname):$(netdev):off panic=1\0" \
"addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
"flash_nfs=run nfsargs addip addtty;" \
"bootm $(kernel_addr)\0" \
"flash_self=run ramargs addip addtty;" \
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
"bootm\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=/tftpboot/yosemite/uImage\0" \
"kernel_addr=fc000000\0" \
"ramdisk_addr=fc100000\0" \
"load=tftp 100000 /tftpboot/yosemite/u-boot.bin\0" \
"update=protect off fff80000 ffffffff;era fff80000 ffffffff;" \
"cp.b 100000 fff80000 80000;" \
"setenv filesize;saveenv\0" \
"upd=run load;run update\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_NET_MULTI 1 /* required for netconsole */
#define CONFIG_PHY1_ADDR 3
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_NET_MULTI 1 /* required for netconsole */
#define CONFIG_PHY1_ADDR 3
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 10.0.4.251
#define CONFIG_ETHADDR 00:10:EC:00:12:34
#define CONFIG_ETH1ADDR 00:10:EC:00:12:35
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_SERVERIP 10.0.4.115
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#ifdef CONFIG_440_EP
#ifdef CONFIG_440EP
/* USB */
#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE
/*Comment this out to enable USB 1.1 device*/
#define USB_2_0_DEVICE
#endif /*CONFIG_440_EP*/
#endif /*CONFIG_440EP*/
#ifdef DEBUG
#define CONFIG_PANIC_HANG
@ -190,53 +222,21 @@
#define CONFIG_HW_WATCHDOG /* watchdog */
#endif
#ifdef CONFIG_440_EP
/* Need to define POST */
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_ECHO | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
/* CFG_CMD_EXT2 |*/ \
/* CFG_CMD_FAT |*/ \
CFG_CMD_I2C | \
/* CFG_CMD_IDE |*/ \
CFG_CMD_IRQ | \
/* CFG_CMD_KGDB |*/ \
CFG_CMD_MII | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
CFG_CMD_FLASH | \
/* CFG_CMD_SPI |*/ \
CFG_CMD_USB | \
0 ) & ~CFG_CMD_IMLS)
#else
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_ECHO | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
/* CFG_CMD_EXT2 |*/ \
/* CFG_CMD_FAT |*/ \
CFG_CMD_I2C | \
/* CFG_CMD_IDE |*/ \
CFG_CMD_IRQ | \
/* CFG_CMD_KGDB |*/ \
CFG_CMD_MII | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
CFG_CMD_FLASH | \
/* CFG_CMD_SPI |*/ \
0 ) & ~CFG_CMD_IMLS)
#endif
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_ELF | \
CFG_CMD_I2C | \
CFG_CMD_IRQ | \
CFG_CMD_MII | \
CFG_CMD_NET | \
CFG_CMD_NFS | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
CFG_CMD_USB )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@ -245,42 +245,42 @@
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CONFIG_LYNXKDI 1 /* support kdi files */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CONFIG_LYNXKDI 1 /* support kdi files */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
#define CONFIG_PCI /* include pci support */
#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
/* Board-specific PCI */
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT
#define CFG_PCI_MASTER_INIT
#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data
@ -288,10 +288,11 @@
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
#define CFG_DCACHE_SIZE (32<<10) /* For IBM 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
@ -309,4 +310,5 @@
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
#endif /* __CONFIG_H */

34
include/linux/list.h
View File

@ -30,7 +30,7 @@ struct list_head {
} while (0)
/*
* Insert a new entry between two known consecutive entries.
* Insert a new entry between two known consecutive entries.
*
* This is only for internal list manipulation where we know
* the prev/next entries already!
@ -103,7 +103,7 @@ static inline void list_del(struct list_head *entry)
static inline void list_del_init(struct list_head *entry)
{
__list_del(entry->prev, entry->next);
INIT_LIST_HEAD(entry);
INIT_LIST_HEAD(entry);
}
/**
@ -113,8 +113,8 @@ static inline void list_del_init(struct list_head *entry)
*/
static inline void list_move(struct list_head *list, struct list_head *head)
{
__list_del(list->prev, list->next);
list_add(list, head);
__list_del(list->prev, list->next);
list_add(list, head);
}
/**
@ -125,8 +125,8 @@ static inline void list_move(struct list_head *list, struct list_head *head)
static inline void list_move_tail(struct list_head *list,
struct list_head *head)
{
__list_del(list->prev, list->next);
list_add_tail(list, head);
__list_del(list->prev, list->next);
list_add_tail(list, head);
}
/**
@ -195,7 +195,7 @@ static inline void list_splice_init(struct list_head *list,
*/
#define list_for_each(pos, head) \
for (pos = (head)->next, prefetch(pos->next); pos != (head); \
pos = pos->next, prefetch(pos->next))
pos = pos->next, prefetch(pos->next))
/**
* list_for_each_prev - iterate over a list backwards
* @pos: the &struct list_head to use as a loop counter.
@ -203,8 +203,8 @@ static inline void list_splice_init(struct list_head *list,
*/
#define list_for_each_prev(pos, head) \
for (pos = (head)->prev, prefetch(pos->prev); pos != (head); \
pos = pos->prev, prefetch(pos->prev))
pos = pos->prev, prefetch(pos->prev))
/**
* list_for_each_safe - iterate over a list safe against removal of list entry
* @pos: the &struct list_head to use as a loop counter.
@ -224,7 +224,7 @@ static inline void list_splice_init(struct list_head *list,
#define list_for_each_entry(pos, head, member) \
for (pos = list_entry((head)->next, typeof(*pos), member), \
prefetch(pos->member.next); \
&pos->member != (head); \
&pos->member != (head); \
pos = list_entry(pos->member.next, typeof(*pos), member), \
prefetch(pos->member.next))
@ -237,16 +237,16 @@ static inline void list_splice_init(struct list_head *list,
*/
#define list_for_each_entry_safe(pos, n, head, member) \
for (pos = list_entry((head)->next, typeof(*pos), member), \
n = list_entry(pos->member.next, typeof(*pos), member); \
&pos->member != (head); \
n = list_entry(pos->member.next, typeof(*pos), member); \
&pos->member != (head); \
pos = n, n = list_entry(n->member.next, typeof(*n), member))
/**
* list_for_each_entry_continue - iterate over list of given type
* continuing after existing point
* @pos: the type * to use as a loop counter.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* list_for_each_entry_continue - iterate over list of given type
* continuing after existing point
* @pos: the type * to use as a loop counter.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
*/
#define list_for_each_entry_continue(pos, head, member) \
for (pos = list_entry(pos->member.next, typeof(*pos), member), \

44
include/ppc440.h
View File

@ -78,7 +78,7 @@
#define ivor13 0x19d /* interrupt vector offset register 13 */
#define ivor14 0x19e /* interrupt vector offset register 14 */
#define ivor15 0x19f /* interrupt vector offset register 15 */
#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define mcsrr0 0x23a /* machine check save/restore register 0 */
#define mcsrr1 0x23b /* mahcine check save/restore register 1 */
#define mcsr 0x23c /* machine check status register */
@ -241,7 +241,7 @@
#define xbcfg 0x23 /* external bus configuration reg */
#define xbcid 0x23 /* external bus core id reg */
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
/* PLB4 to PLB3 Bridge OUT */
#define P4P3_DCR_BASE 0x020
@ -504,7 +504,7 @@
/*-----------------------------------------------------------------------------
| L2 Cache
+----------------------------------------------------------------------------*/
#if defined (CONFIG_440_GX)
#if defined (CONFIG_440GX)
#define L2_CACHE_BASE 0x030
#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */
#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */
@ -515,8 +515,8 @@
#define l2_cache_snp0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */
#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */
#endif /* CONFIG_440_GX */
#endif /* !CONFIG_440_EP !CONFIG_440_GR*/
#endif /* CONFIG_440GX */
#endif /* !CONFIG_440EP !CONFIG_440GR*/
/*-----------------------------------------------------------------------------
| On-Chip Buses
@ -527,7 +527,7 @@
| Clocking, Power Management and Chip Control
+----------------------------------------------------------------------------*/
#define CNTRL_DCR_BASE 0x0b0
#if defined (CONFIG_440_GX)
#if defined (CONFIG_440GX)
#define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */
#define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */
#define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */
@ -573,7 +573,7 @@
#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
#define UIC2_DCR_BASE 0x210
#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status */
#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */
@ -594,7 +594,7 @@
#define uicb0msr (UIC_DCR_BASE+0x6) /* UIC Base masked status */
#define uicb0vr (UIC_DCR_BASE+0x7) /* UIC Base vector */
#define uicb0vcr (UIC_DCR_BASE+0x8) /* UIC Base vector configuration */
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
/* The following is for compatibility with 405 code */
#define uicsr uic0sr
@ -673,16 +673,16 @@
#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg */
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 0 Channel table pointer reg */
#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 1 Channel table pointer reg */
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */
#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
/*---------------------------------------------------------------------------+
@ -770,7 +770,7 @@
/*---------------------------------------------------------------------------+
| Universal interrupt controller 2 interrupts (UIC2)
+---------------------------------------------------------------------------*/
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
#define UIC_ETH2 0x80000000 /* Ethernet 2 */
#define UIC_EWU2 0x40000000 /* Ethernet 2 wakeup */
#define UIC_ETH3 0x20000000 /* Ethernet 3 */
@ -803,12 +803,12 @@
#define UIC_RSVD29 0x00000004 /* Reserved */
#define UIC_RSVD30 0x00000002 /* Reserved */
#define UIC_RSVD31 0x00000001 /* Reserved */
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
/*---------------------------------------------------------------------------+
| Universal interrupt controller Base 0 interrupts (UICB0)
+---------------------------------------------------------------------------*/
#if defined(CONFIG_440_GX)
#if defined(CONFIG_440GX)
#define UICB0_UIC0CI 0x80000000 /* UIC0 Critical Interrupt */
#define UICB0_UIC0NCI 0x40000000 /* UIC0 Noncritical Interrupt */
#define UICB0_UIC1CI 0x20000000 /* UIC1 Critical Interrupt */
@ -818,7 +818,7 @@
#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
/*-----------------------------------------------------------------------------+
| External Bus Controller Bit Settings
@ -1194,7 +1194,7 @@
/*-----------------------------------------------------------------------------+
| Clocking
+-----------------------------------------------------------------------------*/
#if !defined (CONFIG_440_GX) && !defined(CONFIG_440_EP) && !defined(CONFIG_440_GR)
#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
@ -1212,7 +1212,7 @@
#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
#define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */
#else /* !CONFIG_440_GX or CONFIG_440_EP or CONFIG_440_GR */
#else /* !CONFIG_440GX or CONFIG_440EP or CONFIG_440GR */
#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
@ -1260,7 +1260,7 @@
#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440GX */
/*-----------------------------------------------------------------------------
| IIC Register Offsets
@ -1303,7 +1303,7 @@
#define PCIX0_CFGBASE (CFG_PCI_BASE + 0x0ec80000)
#define PCIX0_IOBASE (CFG_PCI_BASE + 0x08000000)
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
/* PCI Local Configuration Registers
--------------------------------- */
@ -1387,12 +1387,12 @@
#define PCIX0_STS (PCIX0_CFGBASE + 0x00e0)
#endif /* !defined(CONFIG_440_EP) !defined(CONFIG_440_GR) */
#endif /* !defined(CONFIG_440EP) !defined(CONFIG_440GR) */
/******************************************************************************
* GPIO macro register defines
******************************************************************************/
#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define GPIO_BASE0 (CFG_PERIPHERAL_BASE+0x00000B00)
#define GPIO_BASE1 (CFG_PERIPHERAL_BASE+0x00000C00)

2
lib_ppc/board.c
View File

@ -547,7 +547,7 @@ void board_init_f (ulong bootflag)
bd->bi_procfreq = gd->cpu_clk; /* Processor Speed, In Hz */
bd->bi_plb_busfreq = gd->bus_clk;
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
bd->bi_pci_busfreq = get_PCI_freq ();
bd->bi_opbfreq = get_OPB_freq ();
#elif defined(CONFIG_XILINX_ML300)

72
net/net.c
View File

@ -40,10 +40,10 @@
*
* DHCP:
*
* Prerequisites: - own ethernet address
* We want: - IP, Netmask, ServerIP, Gateway IP
* - bootfilename, lease time
* Next step: - TFTP
* Prerequisites: - own ethernet address
* We want: - IP, Netmask, ServerIP, Gateway IP
* - bootfilename, lease time
* Next step: - TFTP
*
* TFTP:
*
@ -67,7 +67,7 @@
*
* SNTP:
*
* Prerequisites: - own ethernet address
* Prerequisites: - own ethernet address
* - own IP address
* We want: - network time
* Next step: none
@ -185,7 +185,7 @@ static int net_check_prereq (proto_t protocol);
IPaddr_t NetArpWaitPacketIP;
IPaddr_t NetArpWaitReplyIP;
uchar *NetArpWaitPacketMAC; /* MAC address of waiting packet's destination */
uchar *NetArpWaitTxPacket; /* THE transmit packet */
uchar *NetArpWaitTxPacket; /* THE transmit packet */
int NetArpWaitTxPacketSize;
uchar NetArpWaitPacketBuf[PKTSIZE_ALIGN + PKTALIGN];
ulong NetArpWaitTimerStart;
@ -212,8 +212,8 @@ void ArpRequest (void)
arp->ar_pln = 4;
arp->ar_op = htons (ARPOP_REQUEST);
memcpy (&arp->ar_data[0], NetOurEther, 6); /* source ET addr */
NetWriteIP ((uchar *) & arp->ar_data[6], NetOurIP); /* source IP addr */
memcpy (&arp->ar_data[0], NetOurEther, 6); /* source ET addr */
NetWriteIP ((uchar *) & arp->ar_data[6], NetOurIP); /* source IP addr */
for (i = 10; i < 16; ++i) {
arp->ar_data[i] = 0; /* dest ET addr = 0 */
}
@ -372,11 +372,11 @@ restart:
*/
NetOurIP = 0;
NetServerIP = getenv_IPaddr ("serverip");
NetOurVLAN = getenv_VLAN("vlan"); /* VLANs must be read */
NetOurNativeVLAN = getenv_VLAN("nvlan");
case CDP:
NetOurVLAN = getenv_VLAN("vlan"); /* VLANs must be read */
NetOurNativeVLAN = getenv_VLAN("nvlan");
NetOurVLAN = getenv_VLAN("vlan"); /* VLANs must be read */
NetOurNativeVLAN = getenv_VLAN("nvlan");
case CDP:
NetOurVLAN = getenv_VLAN("vlan"); /* VLANs must be read */
NetOurNativeVLAN = getenv_VLAN("nvlan");
break;
default:
break;
@ -1410,7 +1410,7 @@ NetReceive(volatile uchar * inpkt, int len)
puts (" ICMP Host Redirect to ");
print_IPaddr(icmph->un.gateway);
putc(' ');
break;
return;
#if (CONFIG_COMMANDS & CFG_CMD_PING)
case ICMP_ECHO_REPLY:
/*
@ -1418,7 +1418,7 @@ NetReceive(volatile uchar * inpkt, int len)
*/
/* XXX point to ip packet */
(*packetHandler)((uchar *)ip, 0, 0, 0);
break;
return;
#endif
default:
return;
@ -1427,6 +1427,46 @@ NetReceive(volatile uchar * inpkt, int len)
return;
}
#ifdef CONFIG_UDP_CHECKSUM
if (ip->udp_xsum != 0) {
ulong xsum;
ushort *sumptr;
ushort sumlen;
xsum = ip->ip_p;
xsum += (ntohs(ip->udp_len));
xsum += (ntohl(ip->ip_src) >> 16) & 0x0000ffff;
xsum += (ntohl(ip->ip_src) >> 0) & 0x0000ffff;
xsum += (ntohl(ip->ip_dst) >> 16) & 0x0000ffff;
xsum += (ntohl(ip->ip_dst) >> 0) & 0x0000ffff;
sumlen = ntohs(ip->udp_len);
sumptr = (ushort *) &(ip->udp_src);
while (sumlen > 1) {
ushort sumdata;
sumdata = *sumptr++;
xsum += ntohs(sumdata);
sumlen -= 2;
}
if (sumlen > 0) {
ushort sumdata;
sumdata = *(unsigned char *) sumptr;
sumdata = (sumdata << 8) & 0xff00;
xsum += sumdata;
}
while ((xsum >> 16) != 0) {
xsum = (xsum & 0x0000ffff) + ((xsum >> 16) & 0x0000ffff);
}
if ((xsum != 0x00000000) && (xsum != 0x0000ffff)) {
printf(" UDP wrong checksum %08x %08x\n", xsum, ntohs(ip->udp_xsum));
return;
}
}
#endif
#ifdef CONFIG_NETCONSOLE
nc_input_packet((uchar *)ip +IP_HDR_SIZE,
ntohs(ip->udp_dst),
@ -1477,7 +1517,7 @@ static int net_check_prereq (proto_t protocol)
return (1);
}
#if (CONFIG_COMMANDS & (CFG_CMD_PING | CFG_CMD_SNTP))
common:
common:
#endif
if (NetOurIP == 0) {

2
tools/bddb/README
View File

@ -1,7 +1,7 @@
Hymod Board Database
(C) Copyright 2001
Murray Jensen <Murray.Jensen@cmst.csiro.au>
Murray Jensen <Murray.Jensen@csiro.au>
CSIRO Manufacturing Science and Technology, Preston Lab
25-Jun-01

2
tools/bddb/badsubmit.php
View File

@ -1,7 +1,7 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
require("defs.php");

15
tools/bddb/brlog.php
View File

@ -1,7 +1,7 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// list page (hymod_bddb / boards)
@ -10,8 +10,9 @@
pg_head("$bddb_label - Browse Board Log");
if (!isset($serno) || $serno == 0)
die("serial number not specified!");
$serno=intval($serno);
if ($serno == 0)
die("serial number not specified or invalid!");
function print_cell($str) {
if ($str == '')
@ -55,16 +56,16 @@
<hr></hr>
<p></p>
<?php
$limit=abs(isset($limit)?$limit:20);
$offset=abs(isset($offset)?$offset:0);
$limit=abs(isset($_REQUEST['limit'])?$_REQUEST['limit']:20);
$offset=abs(isset($_REQUEST['offset'])?$_REQUEST['offset']:0);
$lr=mysql_query("select count(*) as n from log where serno=$serno");
$lrow=mysql_fetch_array($lr);
if($lrow['n']>$limit){
$preoffset=max(0,$offset-$limit);
$postoffset=$offset+$limit;
echo "<table width=\"100%\">\n<tr align=center>\n";
printf("<td><%sa href=\"%s?serno=$serno&offset=%d\"><img border=0 alt=\"&lt;\" src=\"/icons/left.gif\"></a></td>\n", $offset>0?"":"no", $PHP_SELF, $preoffset);
printf("<td><%sa href=\"%s?serno=$serno&offset=%d\"><img border=0 alt=\"&gt;\" src=\"/icons/right.gif\"></a></td>\n", $postoffset<$lrow['n']?"":"no", $PHP_SELF, $postoffset);
printf("<td><%sa href=\"%s?submit=Log&serno=$serno&offset=%d\"><img border=0 alt=\"&lt;\" src=\"/icons/left.gif\"></a></td>\n", $offset>0?"":"no", $PHP_SELF, $preoffset);
printf("<td><%sa href=\"%s?submit=Log&serno=$serno&offset=%d\"><img border=0 alt=\"&gt;\" src=\"/icons/right.gif\"></a></td>\n", $postoffset<$lrow['n']?"":"no", $PHP_SELF, $postoffset);
echo "</tr>\n</table>\n";
}
mysql_free_result($lr);

55
tools/bddb/browse.php
View File

@ -1,36 +1,38 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// list page (hymod_bddb / boards)
require("defs.php");
if (!isset($verbose))
$verbose = 0;
$serno=isset($_REQUEST['serno'])?$_REQUEST['serno']:'';
if (!isset($serno))
$serno = 0;
$verbose=isset($_REQUEST['verbose'])?intval($_REQUEST['verbose']):0;
pg_head("$bddb_label - Browse database" . ($verbose?" (verbose)":""));
?>
<p></p>
<?php
if ($serno == 0) {
$limit=abs(isset($limit)?$limit:20);
$offset=abs(isset($offset)?$offset:0);
$limit=isset($_REQUEST['limit'])?abs(intval($_REQUEST['limit'])):20;
$offset=isset($_REQUEST['offset'])?abs(intval($_REQUEST['offset'])):0;
if ($serno == '') {
$lr=mysql_query("select count(*) as n from boards");
$lrow=mysql_fetch_array($lr);
if($lrow['n']>$limit){
$preoffset=max(0,$offset-$limit);
$postoffset=$offset+$limit;
echo "<table width=\"100%\">\n<tr align=center>\n";
printf("<td><%sa href=\"%s?offset=%d\"><img border=0 alt=\"&lt;\" src=\"/icons/left.gif\"></a></td>\n", $offset>0?"":"no", $PHP_SELF, $preoffset);
printf("<td><%sa href=\"%s?offset=%d\"><img border=0 alt=\"&gt;\" src=\"/icons/right.gif\"></a></td>\n", $postoffset<$lrow['n']?"":"no", $PHP_SELF, $postoffset);
echo "<table width=\"100%\">\n<tr>\n";
printf("<td align=left><%sa href=\"%s?submit=Browse&offset=%d&verbose=%d\"><img border=0 alt=\"&lt;\" src=\"/icons/left.gif\"></a></td>\n", $offset>0?"":"no", $PHP_SELF, $preoffset, $verbose);
printf("<td align=right><%sa href=\"%s?submit=Browse&offset=%d&verbose=%d\"><img border=0 alt=\"&gt;\" src=\"/icons/right.gif\"></a></td>\n", $postoffset<$lrow['n']?"":"no", $PHP_SELF, $postoffset, $offset);
echo "</tr>\n</table>\n";
}
mysql_free_result($lr);
}
?>
@ -65,10 +67,28 @@
?>
</tr>
<?php
if ($serno == 0)
$r=mysql_query("select * from boards order by serno limit $offset,$limit");
else
$r=mysql_query("select * from boards where serno=$serno");
$query = "select * from boards";
if ($serno != '') {
$pre = " where ";
foreach (preg_split("/[\s,]+/", $serno) as $s) {
if (preg_match('/^[0-9]+$/',$s))
$query .= $pre . "serno=" . $s;
else if (preg_match('/^([0-9]+)-([0-9]+)$/',$s,$m)) {
$m1 = intval($m[1]); $m2 = intval($m[2]);
if ($m2 <= $m1)
die("bad serial number range ($s)");
$query .= $pre . "(serno>=$m[1] and serno<=$m[2])";
}
else
die("illegal serial number ($s)");
$pre = " or ";
}
}
$query .= " order by serno";
if ($serno == '')
$query .= " limit $offset,$limit";
$r = mysql_query($query);
function print_cell($str) {
if ($str == '')
@ -117,10 +137,7 @@
<table width="100%">
<tr>
<td align=center><?php
if ($verbose)
echo "<a href=\"browse.php?verbose=0\">Terse Listing</a>";
else
echo "<a href=\"browse.php?verbose=1\">Verbose Listing</a>";
printf("<a href=\"%s?submit=Browse&offset=%d&verbose=%d%s\">%s Listing</a>\n", $PHP_SELF, $offset, $verbose?0:1, $serno!=''?"&serno=$serno":'', $verbose?"Terse":"Verbose");
?></td>
<td align=center><a href="index.php">Back to Start</a></td>
</tr>

2
tools/bddb/config.php
View File

@ -1,6 +1,6 @@
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// mysql database access info

82
tools/bddb/create_tables.sql
View File

@ -4,8 +4,8 @@
# Host: localhost Database : hymod_bddb
# (C) Copyright 2001
# Murray Jensen <Murray.Jensen@cmst.csiro.au>
# CSIRO Manufacturing Science and Technology, Preston Lab
# Murray Jensen <Murray.Jensen@csiro.au>
# CSIRO Manufacturing and Infrastructure Technology, Preston Lab
# --------------------------------------------------------
#
@ -22,38 +22,38 @@ CREATE TABLE boards (
rev tinyint(3) unsigned zerofill NOT NULL,
location char(64),
comments text,
sdram0 enum('32M','64M','128M','256M'),
sdram1 enum('32M','64M','128M','256M'),
sdram2 enum('32M','64M','128M','256M'),
sdram3 enum('32M','64M','128M','256M'),
flash0 enum('4M','8M','16M','32M','64M'),
flash1 enum('4M','8M','16M','32M','64M'),
flash2 enum('4M','8M','16M','32M','64M'),
flash3 enum('4M','8M','16M','32M','64M'),
zbt0 enum('512K','1M','2M','4M'),
zbt1 enum('512K','1M','2M','4M'),
zbt2 enum('512K','1M','2M','4M'),
zbt3 enum('512K','1M','2M','4M'),
zbt4 enum('512K','1M','2M','4M'),
zbt5 enum('512K','1M','2M','4M'),
zbt6 enum('512K','1M','2M','4M'),
zbt7 enum('512K','1M','2M','4M'),
zbt8 enum('512K','1M','2M','4M'),
zbt9 enum('512K','1M','2M','4M'),
zbta enum('512K','1M','2M','4M'),
zbtb enum('512K','1M','2M','4M'),
zbtc enum('512K','1M','2M','4M'),
zbtd enum('512K','1M','2M','4M'),
zbte enum('512K','1M','2M','4M'),
zbtf enum('512K','1M','2M','4M'),
xlxtyp0 enum('XCV300E','XCV400E','XCV600E'),
xlxtyp1 enum('XCV300E','XCV400E','XCV600E'),
xlxtyp2 enum('XCV300E','XCV400E','XCV600E'),
xlxtyp3 enum('XCV300E','XCV400E','XCV600E'),
xlxspd0 enum('6','7','8'),
xlxspd1 enum('6','7','8'),
xlxspd2 enum('6','7','8'),
xlxspd3 enum('6','7','8'),
sdram0 enum('32M','64M','128M','256M','512M','1G','2G','4G'),
sdram1 enum('32M','64M','128M','256M','512M','1G','2G','4G'),
sdram2 enum('32M','64M','128M','256M','512M','1G','2G','4G'),
sdram3 enum('32M','64M','128M','256M','512M','1G','2G','4G'),
flash0 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'),
flash1 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'),
flash2 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'),
flash3 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'),
zbt0 enum('512K','1M','2M','4M','8M','16M'),
zbt1 enum('512K','1M','2M','4M','8M','16M'),
zbt2 enum('512K','1M','2M','4M','8M','16M'),
zbt3 enum('512K','1M','2M','4M','8M','16M'),
zbt4 enum('512K','1M','2M','4M','8M','16M'),
zbt5 enum('512K','1M','2M','4M','8M','16M'),
zbt6 enum('512K','1M','2M','4M','8M','16M'),
zbt7 enum('512K','1M','2M','4M','8M','16M'),
zbt8 enum('512K','1M','2M','4M','8M','16M'),
zbt9 enum('512K','1M','2M','4M','8M','16M'),
zbta enum('512K','1M','2M','4M','8M','16M'),
zbtb enum('512K','1M','2M','4M','8M','16M'),
zbtc enum('512K','1M','2M','4M','8M','16M'),
zbtd enum('512K','1M','2M','4M','8M','16M'),
zbte enum('512K','1M','2M','4M','8M','16M'),
zbtf enum('512K','1M','2M','4M','8M','16M'),
xlxtyp0 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'),
xlxtyp1 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'),
xlxtyp2 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'),
xlxtyp3 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'),
xlxspd0 enum('6','7','8','4','5','9','10','11','12'),
xlxspd1 enum('6','7','8','4','5','9','10','11','12'),
xlxspd2 enum('6','7','8','4','5','9','10','11','12'),
xlxspd3 enum('6','7','8','4','5','9','10','11','12'),
xlxtmp0 enum('COM','IND'),
xlxtmp1 enum('COM','IND'),
xlxtmp2 enum('COM','IND'),
@ -62,13 +62,13 @@ CREATE TABLE boards (
xlxgrd1 enum('NORMAL','ENGSAMP'),
xlxgrd2 enum('NORMAL','ENGSAMP'),
xlxgrd3 enum('NORMAL','ENGSAMP'),
cputyp enum('MPC8260'),
cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ'),
cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ'),
busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ'),
hstype enum('AMCC-S2064A'),
hschin enum('0','1','2','3','4'),
hschout enum('0','1','2','3','4'),
cputyp enum('MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)','MPC8560'),
cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ'),
cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ'),
busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ'),
hstype enum('AMCC-S2064A','Xilinx-Rockets'),
hschin enum('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16'),
hschout enum('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16'),
PRIMARY KEY (serno),
KEY serno (serno),
UNIQUE serno_2 (serno)

101
tools/bddb/defs.php
View File

@ -1,13 +1,13 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// contains mysql user id and password - keep secret
require("config.php");
if (isset($logout)) {
if (isset($_REQUEST['logout'])) {
Header("status: 401 Unauthorized");
Header("HTTP/1.0 401 Unauthorized");
Header("WWW-authenticate: basic realm=\"$bddb_label\"");
@ -45,32 +45,40 @@
// board type
$type_vals = array('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY');
// sdram sizes (nbits array is for write into eeprom config file)
$sdram_vals = array('','32M','64M','128M','256M');
$sdram_nbits = array(0,25,26,27,28);
// Xilinx fpga types
$xlxtyp_vals = array('','XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140');
// flash sizes (nbits array is for write into eeprom config file)
$flash_vals = array('','4M','8M','16M','32M','64M');
$flash_nbits = array(0,22,23,24,25,26);
// Xilinx fpga speeds
$xlxspd_vals = array('','6','7','8','4','5','9','10','11','12');
// zbt ram sizes (nbits array is for write into eeprom config file)
$zbt_vals = array('','512K','1M','2M','4M');
$zbt_nbits = array(0,19,20,21,22);
// Xilinx attributes
$xlxtyp_vals = array('','XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000');
$xlxspd_vals = array('','6','7','8','4','5');
// Xilinx fpga temperatures (commercial or industrial)
$xlxtmp_vals = array('','COM','IND');
// Xilinx fpga grades (normal or engineering sample)
$xlxgrd_vals = array('','NORMAL','ENGSAMP');
// processor attributes
$cputyp_vals = array('','MPC8260');
$clk_vals = array('','33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ');
// CPU types
$cputyp_vals = array('','MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)','MPC8560');
// CPU/BUS/CPM clock speeds
$clk_vals = array('','33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ');
// sdram sizes (nbits array is for eeprom config file)
$sdram_vals = array('','32M','64M','128M','256M','512M','1G','2G','4G');
$sdram_nbits = array(0,25,26,27,28,29,30,31,32);
// flash sizes (nbits array is for eeprom config file)
$flash_vals = array('','4M','8M','16M','32M','64M','128M','256M','512M','1G');
$flash_nbits = array(0,22,23,24,25,26,27,28,29,30);
// zbt ram sizes (nbits array is for write into eeprom config file)
$zbt_vals = array('','512K','1M','2M','4M','8M','16M');
$zbt_nbits = array(0,19,20,21,22,23,24);
// high-speed serial attributes
$hstype_vals = array('','AMCC-S2064A');
$hschin_vals = array('0','1','2','3','4');
$hschout_vals = array('0','1','2','3','4');
$hstype_vals = array('','AMCC-S2064A','Xilinx-Rockets');
$hschin_vals = array('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16');
$hschout_vals = array('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16');
// value filters - used when outputting html
function rev_filter($num) {
@ -108,7 +116,7 @@
echo "<hr></hr>\n";
echo "<table width=\"100%\"><tr><td align=left>\n<address>" .
"If you have any problems, email " .
"<a href=\"mailto:Murray.Jensen@cmst.csiro.au\">" .
"<a href=\"mailto:Murray.Jensen@csiro.au\">" .
"Murray Jensen" .
"</a></address>\n" .
"</td><td align=right>\n" .
@ -310,6 +318,38 @@
end_field();
}
// print a mysql ENUM as an html SELECT INPUT
function print_enum_select($name, $array, $vals, $def = -1) {
begin_field($name);
echo "\t\t<select name=$name>\n";
if (key_in_array($name, $array))
$chk = array_search($array[$name], $vals, FALSE);
else
$chk = $def;
$nval = count($vals);
for ($i = 0; $i < $nval; $i++) {
$val = $vals[$i];
if ($val == '')
$pval = "none";
else
$pval = "$val";
printf("\t\t\t<option " .
"value=\"%s\"%s>%s</option>\n",
$val, $i == $chk ? " selected" : "", $pval);
}
echo "\t\t</select>\n";
end_field();
}
// print a group of mysql ENUMs (e.g. name0,name1,...) as an html SELECT
function print_enum_multi($base, $array, $vals, $cnt, $defs, $grp = 0) {
@ -375,9 +415,9 @@
$name = sprintf("%s%x", $base, $i);
if (isset($GLOBALS[$name])) {
if (isset($_REQUEST[$name])) {
$retval .= sprintf(", %s='%s'",
$name, $GLOBALS[$name]);
$name, $_REQUEST[$name]);
}
}
@ -437,7 +477,7 @@
$name = sprintf("%s%x", $base, $i);
if (isset($GLOBALS[$name]))
if (isset($_REQUEST[$name]))
$retval++;
}
@ -458,13 +498,14 @@
function gen_eth_addr($serno) {
$ethaddr_high = (mt_rand(0, 65535) & 0xfeff) | 0x0200;
$ethaddr_low = mt_rand(0, 4294967295);
$ethaddr_hgh = (mt_rand(0, 65535) & 0xfeff) | 0x0200;
$ethaddr_mid = mt_rand(0, 65535);
$ethaddr_low = mt_rand(0, 65535);
return sprintf("%02lx:%02lx:%02lx:%02lx:%02lx:%02lx",
$ethaddr_high >> 8, $ethaddr_high & 0xff,
$ethaddr_low >> 24, ($ethaddr_low >> 16) & 0xff,
($ethaddr_low >> 8) & 0xff, $ethaddr_low & 0xff);
$ethaddr_hgh >> 8, $ethaddr_hgh & 0xff,
$ethaddr_mid >> 8, $ethaddr_mid & 0xff,
$ethaddr_low >> 8, $ethaddr_low & 0xff);
}
// check that an ethernet address is valid

5
tools/bddb/dodelete.php
View File

@ -1,7 +1,7 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// dodelete page (hymod_bddb / boards)
@ -10,8 +10,9 @@
pg_head("$bddb_label - Delete Board Results");
if (!($serno=intval($serno)))
if (!isset($_REQUEST['serno']))
die("the board serial number was not specified");
$serno=intval($_REQUEST['serno']);
mysql_query("delete from boards where serno=$serno");

8
tools/bddb/dodellog.php
View File

@ -1,7 +1,7 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// dodelete page (hymod_bddb / boards)
@ -10,11 +10,13 @@
pg_head("$bddb_label - Delete Log Entry Results");
if (!($serno=intval($serno)))
if (!isset($_REQUEST['serno']))
die("the board serial number was not specified");
$serno=intval($_REQUEST['serno']);
if (!isset($logno) || $logno == 0)
if (!isset($_REQUEST['logno']) || $_REQUEST['logno'] == 0)
die("the log entry number not specified!");
$logno=$_REQUEST['logno'];
mysql_query("delete from log where serno=$serno and logno=$logno");

58
tools/bddb/doedit.php
View File

@ -1,7 +1,7 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// doedit page (hymod_bddb / boards)
@ -10,18 +10,21 @@
pg_head("$bddb_label - Edit Board Results");
if ($serno == 0)
if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
die("the board serial number was not specified");
$serno=intval($_REQUEST['serno']);
$query="update boards set";
if (isset($ethaddr)) {
if (isset($_REQUEST['ethaddr'])) {
$ethaddr=$_REQUEST['ethaddr'];
if (!eth_addr_is_valid($ethaddr))
die("ethaddr is invalid ('$ethaddr')");
$query.=" ethaddr='$ethaddr',";
}
if (isset($date)) {
if (isset($_REQUEST['date'])) {
$date=$_REQUEST['date'];
list($y, $m, $d) = split("-", $date);
if (!checkdate($m, $d, $y) || $y < 1999)
die("date is invalid (input '$date', " .
@ -29,31 +32,36 @@
$query.=" date='$date'";
}
if (isset($batch)) {
if (isset($_REQUEST['batch'])) {
$batch=$_REQUEST['batch'];
if (strlen($batch) > 32)
die("batch field too long (>32)");
$query.=", batch='$batch'";
}
if (isset($type)) {
if (isset($_REQUEST['type'])) {
$type=$_REQUEST['type'];
if (!in_array($type, $type_vals))
die("Invalid type ($type) specified");
$query.=", type='$type'";
}
if (isset($rev)) {
if (isset($_REQUEST['rev'])) {
$rev=$_REQUEST['rev'];
if (($rev = intval($rev)) <= 0 || $rev > 255)
die("Revision number is invalid ($rev)");
$query.=sprintf(", rev=%d", $rev);
}
if (isset($location)) {
if (isset($_REQUEST['location'])) {
$location=$_REQUEST['location'];
if (strlen($location) > 64)
die("location field too long (>64)");
$query.=", location='$location'";
}
if (isset($comments))
if (isset($_REQUEST['comments']))
$comments=$_REQUEST['comments'];
$query.=", comments='" . rawurlencode($comments) . "'";
$query.=gather_enum_multi_query("sdram", 4);
@ -77,46 +85,54 @@
if (count_enum_multi("xlxgrd", 4) != $nxlx)
die("number of xilinx grades not same as number of types");
if (isset($cputyp)) {
if (isset($_REQUEST['cputyp'])) {
$cputyp=$_REQUEST['cputyp'];
$query.=", cputyp='$cputyp'";
if ($cpuspd == '')
if (!isset($_REQUEST['cpuspd']) || $_REQUEST['cpuspd'] == '')
die("must specify cpu speed if cpu type is defined");
$cpuspd=$_REQUEST['cpuspd'];
$query.=", cpuspd='$cpuspd'";
if ($cpmspd == '')
if (!isset($_REQUEST['cpmspd']) || $_REQUEST['cpmspd'] == '')
die("must specify cpm speed if cpu type is defined");
$cpmspd=$_REQUEST['cpmspd'];
$query.=", cpmspd='$cpmspd'";
if ($busspd == '')
if (!isset($_REQUEST['busspd']) || $_REQUEST['busspd'] == '')
die("must specify bus speed if cpu type is defined");
$busspd=$_REQUEST['busspd'];
$query.=", busspd='$busspd'";
}
else {
if (isset($cpuspd))
if (isset($_REQUEST['cpuspd']))
die("can't specify cpu speed if there is no cpu");
if (isset($cpmspd))
if (isset($_REQUEST['cpmspd']))
die("can't specify cpm speed if there is no cpu");
if (isset($busspd))
if (isset($_REQUEST['busspd']))
die("can't specify bus speed if there is no cpu");
}
if (isset($hschin)) {
if (isset($_REQUEST['hschin'])) {
$hschin=$_REQUEST['hschin'];
if (($hschin = intval($hschin)) < 0 || $hschin > 4)
die("Invalid number of hs input chans ($hschin)");
}
else
$hschin = 0;
if (isset($hschout)) {
if (isset($_REQUEST['hschout'])) {
$hschout=$_REQUEST['hschout'];
if (($hschout = intval($hschout)) < 0 || $hschout > 4)
die("Invalid number of hs output chans ($hschout)");
}
else
$hschout = 0;
if (isset($hstype))
if (isset($_REQUEST['hstype'])) {
$hstype=$_REQUEST['hstype'];
$query.=", hstype='$hstype'";
}
else {
if ($hschin != 0)
if ($_REQUEST['hschin'] != 0)
die("number of high-speed input channels must be zero"
. " if high-speed chip is not present");
if ($hschout != 0)
if ($_REQUEST['hschout'] != 0)
die("number of high-speed output channels must be zero"
. " if high-speed chip is not present");
}

19
tools/bddb/doedlog.php
View File

@ -1,7 +1,7 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// doedit page (hymod_bddb / boards)
@ -10,15 +10,18 @@
pg_head("$bddb_label - Edit Log Entry Results");
if ($serno == 0)
if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
die("the board serial number was not specified");
$serno=intval($_REQUEST['serno']);
if (!isset($logno) || $logno == 0)
if (!isset($_REQUEST['logno']) || $_REQUEST['logno'] == '')
die("log number not specified!");
$logno=intval($_REQUEST['logno']);
$query="update log set";
if (isset($date)) {
if (isset($_REQUEST['date'])) {
$date=$_REQUEST['date'];
list($y, $m, $d) = split("-", $date);
if (!checkdate($m, $d, $y) || $y < 1999)
die("date is invalid (input '$date', " .
@ -26,11 +29,15 @@
$query.=" date='$date'";
}
if (isset($who))
if (isset($_REQUEST['who'])) {
$who=$_REQUEST['who'];
$query.=", who='" . $who . "'";
}
if (isset($details))
if (isset($_REQUEST['details'])) {
$details=$_REQUEST['details'];
$query.=", details='" . rawurlencode($details) . "'";
}
$query.=" where serno=$serno and logno=$logno";

6
tools/bddb/donew.php
View File

@ -1,7 +1,7 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// doedit page (hymod_bddb / boards)
@ -10,8 +10,10 @@
pg_head("$bddb_label - Board Registration Results");
if (($serno=intval($serno)) != 0)
if (isset($_REQUEST['serno'])) {
$serno=$_REQUEST['serno'];
die("serial number must not be set ($serno) when Creating!");
}
$query="update boards set";

17
tools/bddb/donewlog.php
View File

@ -1,7 +1,7 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// doedit page (hymod_bddb / boards)
@ -10,11 +10,14 @@
pg_head("$bddb_label - Add Log Entry Results");
if ($serno == 0)
if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
die("serial number not specified!");
$serno=intval($_REQUEST['serno']);
if (isset($logno))
if (isset($_REQUEST['logno'])) {
$logno=$_REQUEST['logno'];
die("log number must not be set ($logno) when Creating!");
}
$query="update log set serno=$serno";
@ -23,11 +26,15 @@
die("date is invalid (input '$date', yyyy-mm-dd '$y-$m-$d')");
$query.=", date='$date'";
if (isset($who))
if (isset($_REQUEST['who'])) {
$who=$_REQUEST['who'];
$query.=", who='" . $who . "'";
}
if (isset($details))
if (isset($_REQUEST['details'])) {
$details=$_REQUEST['details'];
$query.=", details='" . rawurlencode($details) . "'";
}
// echo "final query = '$query'<br>\n";

18
tools/bddb/edit.php
View File

@ -1,7 +1,7 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// edit page (hymod_bddb / boards)
@ -11,7 +11,7 @@
pg_head("$bddb_label - Edit Board Registration");
if ($serno == 0)
die("serial number not specified!");
die("serial number not specified or invalid!");
$pserno = sprintf("%010d", $serno);
@ -73,17 +73,17 @@
// xlxgrd[0-3] enum('NORMAL','ENGSAMP')
print_enum_multi("xlxgrd", $row, $xlxgrd_vals, 4, array(), 1);
// cputyp enum('MPC8260')
// cputyp enum('MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)')
print_enum("cputyp", $row, $cputyp_vals);
// cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ')
print_enum("cpuspd", $row, $clk_vals);
// cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
print_enum_select("cpuspd", $row, $clk_vals);
// cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ')
print_enum("cpmspd", $row, $clk_vals);
// cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
print_enum_select("cpmspd", $row, $clk_vals);
// busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ')
print_enum("busspd", $row, $clk_vals);
// busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
print_enum_select("busspd", $row, $clk_vals);
// hstype enum('AMCC-S2064A')
print_enum("hstype", $row, $hstype_vals);

8
tools/bddb/edlog.php
View File

@ -1,7 +1,7 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// edit page (hymod_bddb / boards)
@ -10,11 +10,13 @@
pg_head("$bddb_label - Edit Board Log Entry");
if ($serno == 0)
if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
die("serial number not specified!");
$serno=intval($_REQUEST['serno']);
if (!isset($logno) || $logno == 0)
if (!isset($_REQUEST['logno']) || $_REQUEST['logno'] == '')
die("log number not specified!");
$logno=intval($_REQUEST['logno']);
$pserno = sprintf("%010d", $serno);
$plogno = sprintf("%010d", $logno);

10
tools/bddb/execute.php
View File

@ -1,16 +1,12 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
if (!isset($serno))
$serno = 0;
else
$serno = intval($serno);
$serno=isset($_REQUEST['serno'])?$_REQUEST['serno']:'';
if (!isset($submit))
$submit = "[NOT SET]";
$submit=isset($_REQUEST['submit'])?$_REQUEST['submit']:"[NOT SET]";
switch ($submit) {

2
tools/bddb/index.php
View File

@ -1,7 +1,7 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
require("defs.php");

19
tools/bddb/new.php
View File

@ -1,7 +1,7 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// edit page (hymod_bddb / boards)
@ -13,6 +13,7 @@
<form action=donew.php method=POST>
<p></p>
<?php
$serno=intval($serno);
// if a serial number was supplied, fetch the record
// and use its contents as defaults
if ($serno != 0) {
@ -23,8 +24,6 @@
else
$row = array();
echo "<input type=hidden name=serno value=0>\n";
begin_table(5);
// date date
@ -60,17 +59,17 @@
// xlxgrd[0-3] enum('NORMAL','ENGSAMP')
print_enum_multi("xlxgrd", $row, $xlxgrd_vals, 4, array(1), 1);
// cputyp enum('MPC8260')
// cputyp enum('MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)')
print_enum("cputyp", $row, $cputyp_vals, 1);
// cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ')
print_enum("cpuspd", $row, $clk_vals, 4);
// cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
print_enum_select("cpuspd", $row, $clk_vals, 4);
// cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ')
print_enum("cpmspd", $row, $clk_vals, 4);
// cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
print_enum_select("cpmspd", $row, $clk_vals, 4);
// busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ')
print_enum("busspd", $row, $clk_vals, 2);
// busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
print_enum_select("busspd", $row, $clk_vals, 2);
// hstype enum('AMCC-S2064A')
print_enum("hstype", $row, $hstype_vals, 1);

15
tools/bddb/newlog.php
View File

@ -1,7 +1,7 @@
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// edit page (hymod_bddb / boards)
@ -10,11 +10,14 @@
pg_head("$bddb_label - New Log Entry");
if ($serno == 0)
die("serial number not specified!");
if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
die("serial number not specified or invalid!");
$serno=intval($_REQUEST['serno']);
if (isset($logno))
die("log number must not be specified when adding!");
if (isset($_REQUEST['logno'])) {
$logno=$_REQUEST['logno'];
die("log number must not be specified when adding! ($logno)");
}
?>
<form action=donewlog.php method=POST>
<p></p>
@ -27,7 +30,7 @@
print_field("date", array('date' => date("Y-m-d")));
// who char(20)
print_field("who", "");
print_field("who", array());
// details text
print_field_multiline("details", array(), 60, 10, 'text_filter');

2
tools/gdb/Makefile
View File

@ -1,6 +1,6 @@
#
# (C) Copyright 2000
# Murray Jensen <Murray.Jensen@cmst.csiro.au>
# Murray Jensen <Murray.Jensen@csiro.au>
#
# See file CREDITS for list of people who contributed to this
# project.