diff --git a/drivers/net/fec_imx.c b/drivers/net/fec_imx.c
index 2f0876e5f..4ed5e8e14 100644
--- a/drivers/net/fec_imx.c
+++ b/drivers/net/fec_imx.c
@@ -621,6 +621,7 @@ static int fec_alloc_receive_packets(struct fec_priv *fec, int count, int size)
 #ifdef CONFIG_OFDEVICE
 static int fec_probe_dt(struct device_d *dev, struct fec_priv *fec)
 {
+	struct device_node *mdiobus;
 	int ret;
 
 	ret = of_get_phy_mode(dev->device_node);
@@ -629,6 +630,10 @@ static int fec_probe_dt(struct device_d *dev, struct fec_priv *fec)
 	else
 		fec->interface = ret;
 
+	mdiobus = of_get_child_by_name(dev->device_node, "mdio");
+	if (mdiobus)
+		fec->miibus.dev.device_node = mdiobus;
+
 	return 0;
 }
 #else
diff --git a/drivers/net/orion-gbe.c b/drivers/net/orion-gbe.c
index 17497047a..9315127ac 100644
--- a/drivers/net/orion-gbe.c
+++ b/drivers/net/orion-gbe.c
@@ -56,6 +56,7 @@ struct txdesc {
 };
 
 struct port_priv {
+	struct device_d dev;
 	struct eth_device edev;
 	void __iomem *regs;
 	struct device_node *np;
@@ -64,6 +65,7 @@ struct port_priv {
 	struct rxdesc *rxdesc;
 	struct rxdesc *current_rxdesc;
 	u8 *rxbuf;
+	phy_interface_t intf;
 };
 
 struct orion_gbe {
@@ -351,16 +353,6 @@ static int port_get_ethaddr(struct eth_device *edev, unsigned char *mac)
 	return 0;
 }
 
-static int port_open(struct eth_device *edev)
-{
-	struct port_priv *port = edev->priv;
-
-	/* enable receive queue */
-	writel(BIT(URXQ), port->regs + PORT_RQC);
-
-	return 0;
-}
-
 static void port_adjust_link(struct eth_device *edev)
 {
 	struct port_priv *port = edev->priv;
@@ -389,10 +381,25 @@ static void port_adjust_link(struct eth_device *edev)
 	writel(reg, port->regs + PORT_SC0);
 }
 
+static int port_open(struct eth_device *edev)
+{
+	struct port_priv *port = edev->priv;
+	int ret;
+
+	ret = phy_device_connect(&port->edev, NULL, -1, port_adjust_link, 0,
+			port->intf);
+	if (ret)
+		return ret;
+
+	/* enable receive queue */
+	writel(BIT(URXQ), port->regs + PORT_RQC);
+
+	return 0;
+}
+
 static int port_probe(struct device_d *parent, struct port_priv *port)
 {
-	struct device_node *phynp;
-	phy_interface_t intf = PHY_INTERFACE_MODE_RGMII;
+	struct device_d *dev = &port->dev;
 	u32 reg;
 	int ret;
 
@@ -400,12 +407,11 @@ static int port_probe(struct device_d *parent, struct port_priv *port)
 	if (of_property_read_u32(port->np, "reg", &port->portno))
 		dev_warn(parent, "port node is missing reg property\n");
 
-	phynp = of_parse_phandle(port->np, "phy-handle", 0);
-	if (phynp) {
-		ret = of_get_phy_mode(port->np);
-		if (ret > 0)
-			intf = ret;
-	}
+	ret = of_get_phy_mode(port->np);
+	if (ret > 0)
+		port->intf = ret;
+	else
+		port->intf = PHY_INTERFACE_MODE_RGMII;
 
 	port->regs = dev_get_mem_region(parent, 0) + PORTn_REGS(port->portno);
 
@@ -440,10 +446,18 @@ static int port_probe(struct device_d *parent, struct port_priv *port)
 
 	reg = SC1_RESERVED;
 	reg |= DEFAULT_COL_LIMIT | COL_ON_BACKPRESS | INBAND_ANEG_BYPASS;
-	if (intf == PHY_INTERFACE_MODE_RGMII)
+	if (port->intf == PHY_INTERFACE_MODE_RGMII)
 		reg |= RGMII_ENABLE;
 	writel(reg, port->regs + PORT_SC1);
 
+	sprintf(dev->name, "orion-gbe-port");
+	dev->id = port->portno;
+	dev->parent = parent;
+	dev->device_node = port->np;
+	ret = register_device(dev);
+	if (ret)
+		return ret;
+
 	/* register eth device */
 	port->edev.priv = port;
 	port->edev.open = port_open;
@@ -452,20 +466,12 @@ static int port_probe(struct device_d *parent, struct port_priv *port)
 	port->edev.halt = port_halt;
 	port->edev.set_ethaddr = port_set_ethaddr;
 	port->edev.get_ethaddr = port_get_ethaddr;
-	port->edev.parent = parent;
+	port->edev.parent = dev;
 
 	ret = eth_register(&port->edev);
 	if (ret)
 		return ret;
 
-	/* attach phy device */
-	if (phynp) {
-		ret = of_phy_device_connect(&port->edev, phynp,
-					    port_adjust_link, 0, intf);
-		if (ret)
-			return ret;
-	}
-
 	return 0;
 }
 
diff --git a/drivers/net/phy/mdio-mvebu.c b/drivers/net/phy/mdio-mvebu.c
index f8b492a24..3dcf644ec 100644
--- a/drivers/net/phy/mdio-mvebu.c
+++ b/drivers/net/phy/mdio-mvebu.c
@@ -120,6 +120,7 @@ static int mvebu_mdio_probe(struct device_d *dev)
 	if (!IS_ERR(priv->clk))
 		clk_enable(priv->clk);
 
+	priv->miibus.dev.device_node = dev->device_node;
 	priv->miibus.priv = priv;
 	priv->miibus.parent = dev;
 	priv->miibus.read = mvebu_mdio_read;
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 895ead0a5..f526cfcd8 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -49,6 +49,71 @@ int mdiobus_detect(struct device_d *dev)
 	return 0;
 }
 
+static int of_mdiobus_register_phy(struct mii_bus *mdio, struct device_node *child,
+				   u32 addr)
+{
+	struct phy_device *phy;
+	int ret;
+
+	phy = get_phy_device(mdio, addr);
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
+
+	/*
+	 * Associate the OF node with the device structure so it
+	 * can be looked up later
+	 */
+	phy->dev.device_node = child;
+
+	/*
+	 * All data is now stored in the phy struct;
+	 * register it
+	 */
+	ret = phy_register_device(phy);
+	if (ret)
+		return ret;
+
+	dev_dbg(&mdio->dev, "registered phy %s at address %i\n",
+		child->name, addr);
+
+	return 0;
+}
+
+/**
+ * of_mdiobus_register - Register mii_bus and create PHYs from the device tree
+ * @mdio: pointer to mii_bus structure
+ * @np: pointer to device_node of MDIO bus.
+ *
+ * This function registers the mii_bus structure and registers a phy_device
+ * for each child node of @np.
+ */
+static int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
+{
+	struct device_node *child;
+	u32 addr;
+	int ret;
+
+	/* Loop over the child nodes and register a phy_device for each one */
+	for_each_available_child_of_node(np, child) {
+		ret = of_property_read_u32(child, "reg", &addr);
+		if (ret) {
+			dev_err(&mdio->dev, "%s has invalid PHY address\n",
+				child->full_name);
+			continue;
+		}
+
+		if (addr >= PHY_MAX_ADDR) {
+			dev_err(&mdio->dev, "%s PHY address %i is too large\n",
+				child->full_name, addr);
+			continue;
+		}
+
+		of_mdiobus_register_phy(mdio, child, addr);
+	}
+
+	return 0;
+}
+
 /**
  * mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
  * @bus: target mii_bus
@@ -85,6 +150,10 @@ int mdiobus_register(struct mii_bus *bus)
 	list_add_tail(&bus->list, &mii_bus_list);
 
 	pr_info("%s: probed\n", dev_name(&bus->dev));
+
+	if (bus->dev.device_node)
+		of_mdiobus_register(bus, bus->dev.device_node);
+
 	return 0;
 }
 EXPORT_SYMBOL(mdiobus_register);
@@ -114,8 +183,6 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
 	if (IS_ERR(phydev))
 		return phydev;
 
-	bus->phy_map[addr] = phydev;
-
 	return phydev;
 }
 EXPORT_SYMBOL(mdiobus_scan);
@@ -175,6 +242,39 @@ static struct file_operations phydev_ops = {
 	.lseek = dev_lseek_default,
 };
 
+static void of_set_phy_supported(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->dev.device_node;
+	u32 max_speed;
+
+	if (!IS_ENABLED(CONFIG_OFDEVICE))
+		return;
+
+	if (!node)
+		return;
+
+	if (!of_property_read_u32(node, "max-speed", &max_speed)) {
+		/*
+		 * The default values for phydev->supported are provided by the PHY
+		 * driver "features" member, we want to reset to sane defaults first
+		 * before supporting higher speeds.
+		 */
+		phydev->supported &= PHY_DEFAULT_FEATURES;
+
+		switch (max_speed) {
+		default:
+			return;
+
+		case SPEED_1000:
+			phydev->supported |= PHY_1000BT_FEATURES;
+		case SPEED_100:
+			phydev->supported |= PHY_100BT_FEATURES;
+		case SPEED_10:
+			phydev->supported |= PHY_10BT_FEATURES;
+		}
+	}
+}
+
 static int mdio_bus_probe(struct device_d *_dev)
 {
 	struct phy_device *dev = to_phy_device(_dev);
@@ -208,7 +308,8 @@ static int mdio_bus_probe(struct device_d *_dev)
 	 * a controller will attach, and may modify one
 	 * or both of these values */
 	dev->supported = drv->features;
-	dev->advertising = drv->features;
+	of_set_phy_supported(dev);
+	dev->advertising = dev->supported;
 
 	dev_add_param_int_ro(&dev->dev, "phy_addr", dev->addr, "%d");
 	dev_add_param_int_ro(&dev->dev, "phy_id", dev->phy_id, "0x%08x");
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 3cba2c405..8aea6534b 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -37,6 +37,34 @@
 #define KS8737_CTRL_INT_ACTIVE_HIGH		(1 << 14)
 #define KSZ8051_RMII_50MHZ_CLK			(1 << 7)
 
+/* Write/read to/from extended registers */
+#define MII_KSZPHY_EXTREG                       0x0b
+#define KSZPHY_EXTREG_WRITE                     0x8000
+
+#define MII_KSZPHY_EXTREG_WRITE                 0x0c
+#define MII_KSZPHY_EXTREG_READ                  0x0d
+
+/* Extended registers */
+#define MII_KSZPHY_CLK_CONTROL_PAD_SKEW         0x104
+#define MII_KSZPHY_RX_DATA_PAD_SKEW             0x105
+#define MII_KSZPHY_TX_DATA_PAD_SKEW             0x106
+
+#define PS_TO_REG				200
+
+static int kszphy_extended_write(struct phy_device *phydev,
+				u32 regnum, u16 val)
+{
+	phy_write(phydev, MII_KSZPHY_EXTREG, KSZPHY_EXTREG_WRITE | regnum);
+	return phy_write(phydev, MII_KSZPHY_EXTREG_WRITE, val);
+}
+
+static int kszphy_extended_read(struct phy_device *phydev,
+				u32 regnum)
+{
+	phy_write(phydev, MII_KSZPHY_EXTREG, regnum);
+	return phy_read(phydev, MII_KSZPHY_EXTREG_READ);
+}
+
 static int kszphy_config_init(struct phy_device *phydev)
 {
 	return 0;
@@ -62,6 +90,62 @@ static int ks8051_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int ksz9021_load_values_from_of(struct phy_device *phydev,
+				       struct device_node *of_node, u16 reg,
+				       const char *field[])
+{
+	int val, regval, i;
+
+	regval = kszphy_extended_read(phydev, reg);
+
+	for (i = 0; i < 4; i++) {
+		int shift = i * 4;
+
+		if (of_property_read_u32(of_node, field[i], &val))
+			continue;
+
+		regval &= ~(0xf << shift);
+		regval |= ((val / PS_TO_REG) & 0xf) << shift;
+	}
+
+	return kszphy_extended_write(phydev, reg, regval);
+}
+
+static int ksz9021_config_init(struct phy_device *phydev)
+{
+	struct device_d *dev = &phydev->dev;
+	struct device_node *of_node = dev->device_node;
+	const char *clk_pad_skew_names[] = {
+		"txen-skew-ps", "txc-skew-ps",
+		"rxdv-skew-ps", "rxc-skew-ps"
+	};
+	const char *rx_pad_skew_names[] = {
+		"rxd0-skew-ps", "rxd1-skew-ps",
+		"rxd2-skew-ps", "rxd3-skew-ps"
+	};
+	const char *tx_pad_skew_names[] = {
+		"txd0-skew-ps", "txd1-skew-ps",
+		"txd2-skew-ps", "txd3-skew-ps"
+	};
+
+	if (!of_node && dev->parent->device_node)
+		of_node = dev->parent->device_node;
+
+	if (of_node) {
+		ksz9021_load_values_from_of(phydev, of_node,
+				    MII_KSZPHY_CLK_CONTROL_PAD_SKEW,
+				    clk_pad_skew_names);
+		ksz9021_load_values_from_of(phydev, of_node,
+				    MII_KSZPHY_RX_DATA_PAD_SKEW,
+				    rx_pad_skew_names);
+		ksz9021_load_values_from_of(phydev, of_node,
+				    MII_KSZPHY_TX_DATA_PAD_SKEW,
+				    tx_pad_skew_names);
+	}
+
+	return 0;
+}
+
 #define KSZ8873MLL_GLOBAL_CONTROL_4	0x06
 #define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX	(1 << 6)
 #define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED	(1 << 4)
@@ -166,6 +250,15 @@ static struct phy_driver ksphy_driver[] = {
 	.phy_id_mask	= 0x000ffffe,
 	.drv.name	= "Micrel KSZ9021 Gigabit PHY",
 	.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause),
+	.config_init	= ksz9021_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+}, {
+	.phy_id		= PHY_ID_KSZ9031,
+	.phy_id_mask	= 0x00fffff0,
+	.drv.name	= "Micrel KSZ9031 Gigabit PHY",
+	.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause
+				| SUPPORTED_Asym_Pause),
 	.config_init	= kszphy_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 5975637ff..1a2fdf1d9 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -245,6 +245,8 @@ int phy_register_device(struct phy_device* dev)
 	if (ret)
 		return ret;
 
+	dev->bus->phy_map[dev->addr] = dev;
+
 	dev->registered = 1;
 
 	if (dev->dev.driver)
@@ -260,12 +262,71 @@ int phy_register_device(struct phy_device* dev)
 	return ret;
 }
 
+static struct phy_device *of_mdio_find_phy(struct eth_device *edev)
+{
+	struct device_d *dev;
+	struct device_node *phy_node;
+
+	if (!IS_ENABLED(CONFIG_OFDEVICE))
+		return NULL;
+
+	if (!edev->parent->device_node)
+		return NULL;
+
+	phy_node = of_parse_phandle(edev->parent->device_node, "phy-handle", 0);
+	if (!phy_node)
+		return NULL;
+
+	bus_for_each_device(&mdio_bus_type, dev) {
+		if (dev->device_node == phy_node)
+			return container_of(dev, struct phy_device, dev);
+	}
+
+	return NULL;
+}
+
+static int phy_device_attach(struct phy_device *phy, struct eth_device *edev,
+		       void (*adjust_link) (struct eth_device *edev),
+		       u32 flags, phy_interface_t interface)
+{
+	int ret;
+
+	if (phy->attached_dev)
+		return -EBUSY;
+
+	phy->interface = interface;
+	phy->dev_flags = flags;
+
+	if (!phy->registered) {
+		ret = phy_register_device(phy);
+		if (ret)
+			return ret;
+	}
+
+	edev->phydev = phy;
+	phy->attached_dev = edev;
+
+	ret = phy_init_hw(phy);
+	if (ret)
+		return ret;
+
+	/* Sanitize settings based on PHY capabilities */
+	if ((phy->supported & SUPPORTED_Autoneg) == 0)
+		phy->autoneg = AUTONEG_DISABLE;
+
+	phy_config_aneg(edev->phydev);
+
+	phy->adjust_link = adjust_link;
+
+	return 0;
+}
+
 /* Automatically gets and returns the PHY device */
 int phy_device_connect(struct eth_device *edev, struct mii_bus *bus, int addr,
 		       void (*adjust_link) (struct eth_device *edev),
 		       u32 flags, phy_interface_t interface)
 {
-	struct phy_device* dev = NULL;
+	struct phy_device *phy;
 	unsigned int i;
 	int ret = -EINVAL;
 
@@ -274,94 +335,47 @@ int phy_device_connect(struct eth_device *edev, struct mii_bus *bus, int addr,
 		return 0;
 	}
 
+	phy = of_mdio_find_phy(edev);
+	if (phy) {
+		ret = phy_device_attach(phy, edev, adjust_link, flags, interface);
+
+		goto out;
+	}
+
 	if (addr >= 0) {
-		dev = mdiobus_scan(bus, addr);
-		if (IS_ERR(dev)) {
+		phy = mdiobus_scan(bus, addr);
+		if (IS_ERR(phy)) {
 			ret = -EIO;
-			goto fail;
-		}
-	} else {
-		for (i = 0; i < PHY_MAX_ADDR && !edev->phydev; i++) {
-			/* skip masked out PHY addresses */
-			if (bus->phy_mask & (1 << i))
-				continue;
-
-			dev = mdiobus_scan(bus, i);
-			if (!IS_ERR(dev) && !dev->attached_dev)
-                                break;
+			goto out;
 		}
 
-		if (IS_ERR(dev)) {
-			ret = PTR_ERR(dev);
-			goto fail;
-		}
+		ret = phy_device_attach(phy, edev, adjust_link, flags, interface);
+
+		goto out;
 	}
 
-	if (dev->attached_dev)
-		return -EBUSY;
+	for (i = 0; i < PHY_MAX_ADDR && !edev->phydev; i++) {
+		/* skip masked out PHY addresses */
+		if (bus->phy_mask & (1 << i))
+			continue;
 
-	dev->interface = interface;
-	dev->dev_flags = flags;
+		phy = mdiobus_scan(bus, i);
+		if (IS_ERR(phy))
+			continue;
 
-	if (!dev->registered) {
-		ret = phy_register_device(dev);
-		if (ret)
-			goto fail;
+		ret = phy_device_attach(phy, edev, adjust_link, flags, interface);
+
+		goto out;
 	}
 
-	edev->phydev = dev;
-	dev->attached_dev = edev;
-
-	ret = phy_init_hw(dev);
+	ret = -ENODEV;
+out:
 	if (ret)
-		goto fail;
+		puts("Unable to find a PHY (unknown ID?)\n");
 
-	/* Sanitize settings based on PHY capabilities */
-	if ((dev->supported & SUPPORTED_Autoneg) == 0)
-		dev->autoneg = AUTONEG_DISABLE;
-
-	phy_config_aneg(edev->phydev);
-
-	dev->adjust_link = adjust_link;
-
-	return 0;
-
-fail:
-	puts("Unable to find a PHY (unknown ID?)\n");
 	return ret;
 }
 
-#if defined(CONFIG_OFTREE)
-int of_phy_device_connect(struct eth_device *edev, struct device_node *phy_np,
-			  void (*adjust_link) (struct eth_device *edev),
-			  u32 flags, phy_interface_t interface)
-{
-	struct device_node *bus_np;
-	struct mii_bus *miibus;
-	int phy_addr = -ENODEV;
-
-	if (!phy_np)
-		return -EINVAL;
-
-	of_property_read_u32(phy_np, "reg", &phy_addr);
-
-	bus_np = of_get_parent(phy_np);
-	if (!bus_np)
-		return -ENODEV;
-
-	for_each_mii_bus(miibus) {
-		if (miibus->parent && miibus->parent->device_node == bus_np)
-			return phy_device_connect(edev, miibus, phy_addr,
-					  adjust_link, flags, interface);
-	}
-
-	dev_err(&edev->dev, "unable to mdio bus for phy %s\n",
-		phy_np->full_name);
-
-	return -ENODEV;
-}
-#endif
-
 /* Generic PHY support and helper functions */
 
 /**
@@ -376,7 +390,7 @@ int of_phy_device_connect(struct eth_device *edev, struct device_node *phy_np,
 int genphy_config_advert(struct phy_device *phydev)
 {
 	u32 advertise;
-	int oldadv, adv;
+	int oldadv, adv, bmsr;
 	int err, changed = 0;
 
 	/* Only allow advertising what
@@ -403,8 +417,11 @@ int genphy_config_advert(struct phy_device *phydev)
 	}
 
 	/* Configure gigabit if it's supported */
-	if (phydev->supported & (SUPPORTED_1000baseT_Half |
-				SUPPORTED_1000baseT_Full)) {
+	bmsr = phy_read(phydev, MII_BMSR);
+	if (bmsr < 0)
+		return bmsr;
+
+	if (bmsr & BMSR_ESTATEN) {
 		oldadv = adv = phy_read(phydev, MII_CTRL1000);
 
 		if (adv < 0)
@@ -788,8 +805,8 @@ static int genphy_config_init(struct phy_device *phydev)
 			features |= SUPPORTED_1000baseT_Half;
 	}
 
-	phydev->supported = features;
-	phydev->advertising = features;
+	phydev->supported &= features;
+	phydev->advertising &= features;
 
 	return 0;
 }
@@ -841,7 +858,9 @@ static struct phy_driver genphy_driver = {
 	.drv.name = "Generic PHY",
 	.phy_id = PHY_ANY_UID,
 	.phy_id_mask = PHY_ANY_UID,
-	.features = 0,
+	.features = PHY_GBIT_FEATURES | SUPPORTED_MII |
+		SUPPORTED_AUI | SUPPORTED_FIBRE |
+		SUPPORTED_BNC,
 };
 
 static int generic_phy_register(void)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 9567c43e3..3229aa630 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -20,18 +20,26 @@
 #include <linux/ethtool.h>
 #include <linux/mii.h>
 
-#define PHY_BASIC_FEATURES	(SUPPORTED_10baseT_Half | \
-				 SUPPORTED_10baseT_Full | \
-				 SUPPORTED_100baseT_Half | \
-				 SUPPORTED_100baseT_Full | \
-				 SUPPORTED_Autoneg | \
+#define PHY_DEFAULT_FEATURES    (SUPPORTED_Autoneg | \
 				 SUPPORTED_TP | \
 				 SUPPORTED_MII)
 
-#define PHY_GBIT_FEATURES	(PHY_BASIC_FEATURES | \
-				 SUPPORTED_1000baseT_Half | \
+#define PHY_10BT_FEATURES       (SUPPORTED_10baseT_Half | \
+				 SUPPORTED_10baseT_Full)
+
+#define PHY_100BT_FEATURES      (SUPPORTED_100baseT_Half | \
+				 SUPPORTED_100baseT_Full)
+
+#define PHY_1000BT_FEATURES     (SUPPORTED_1000baseT_Half | \
 				 SUPPORTED_1000baseT_Full)
 
+#define PHY_BASIC_FEATURES      (PHY_10BT_FEATURES | \
+				 PHY_100BT_FEATURES | \
+				 PHY_DEFAULT_FEATURES)
+
+#define PHY_GBIT_FEATURES       (PHY_BASIC_FEATURES | \
+				 PHY_1000BT_FEATURES)
+
 /* Interface Mode definitions */
 typedef enum {
 	PHY_INTERFACE_MODE_NA,
@@ -280,20 +288,6 @@ int phy_device_connect(struct eth_device *dev, struct mii_bus *bus, int addr,
 		       void (*adjust_link) (struct eth_device *edev),
 		       u32 flags, phy_interface_t interface);
 
-#if defined(CONFIG_OFTREE)
-int of_phy_device_connect(struct eth_device *edev, struct device_node *phy_np,
-			  void (*adjust_link) (struct eth_device *edev),
-			  u32 flags, phy_interface_t interface);
-#else
-static inline int of_phy_device_connect(struct eth_device *edev,
-				struct device_node *phy_np,
-				void (*adjust_link) (struct eth_device *edev),
-				u32 flags, phy_interface_t interface)
-{
-	return -ENOSYS;
-}
-#endif
-
 int phy_update_status(struct phy_device *phydev);
 int phy_wait_aneg_done(struct phy_device *phydev);