dts: update to v3.19-rc3

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts/Bindings/input/gpio-keys.txt

@@ -10,12 +10,13 @@ Optional properties:
 Each button (key) is represented as a sub-node of "gpio-keys":
 Subnode properties:
 
+	- gpios: OF device-tree gpio specification.
+	- interrupts: the interrupt line for that input.
 	- label: Descriptive name of the key.
 	- linux,code: Keycode to emit.
 
-Required mutual exclusive subnode-properties:
-	- gpios: OF device-tree gpio specification.
-	- interrupts: the interrupt line for that input
+Note that either "interrupts" or "gpios" properties can be omitted, but not
+both at the same time. Specifying both properties is allowed.
 
 Optional subnode-properties:
 	- linux,input-type: Specify event type this button/key generates.
@@ -23,6 +24,9 @@ Optional subnode-properties:
 	- debounce-interval: Debouncing interval time in milliseconds.
 	  If not specified defaults to 5.
 	- gpio-key,wakeup: Boolean, button can wake-up the system.
+	- linux,can-disable: Boolean, indicates that button is connected
+	  to dedicated (not shared) interrupt which can be disabled to
+	  suppress events from the button.
 
 Example nodes:
 

dts/Bindings/input/stmpe-keypad.txt

@@ -8,6 +8,8 @@ Optional properties:
  - debounce-interval        : Debouncing interval time in milliseconds
  - st,scan-count            : Scanning cycles elapsed before key data is updated
  - st,no-autorepeat         : If specified device will not autorepeat
+ - keypad,num-rows          : See ./matrix-keymap.txt
+ - keypad,num-columns       : See ./matrix-keymap.txt
 
 Example:
 

dts/include/dt-bindings/thermal/thermal.h

@@ -11,7 +11,7 @@
 #define _DT_BINDINGS_THERMAL_THERMAL_H
 
 /* On cooling devices upper and lower limits */
-#define THERMAL_NO_LIMIT		(-1UL)
+#define THERMAL_NO_LIMIT		(~0)
 
 #endif
 

dts/src/arm/armada-370-db.dts

@@ -203,27 +203,3 @@
 		compatible = "linux,spdif-dir";
 	};
 };
-
-&pinctrl {
-	/*
-	 * These pins might be muxed as I2S by
-	 * the bootloader, but it conflicts
-	 * with the real I2S pins that are
-	 * muxed using i2s_pins. We must mux
-	 * those pins to a function other than
-	 * I2S.
-	 */
-	pinctrl-0 = <&hog_pins1 &hog_pins2>;
-	pinctrl-names = "default";
-
-	hog_pins1: hog-pins1 {
-		marvell,pins = "mpp6",  "mpp8", "mpp10",
-			       "mpp12", "mpp13";
-		marvell,function = "gpio";
-	};
-
-	hog_pins2: hog-pins2 {
-		marvell,pins = "mpp5", "mpp7", "mpp9";
-		marvell,function = "gpo";
-	};
-};