diff --git a/arch/arm/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/dts/imx6qdl-dfi-fs700-m60.dtsi
index a54639ee7..5c7bcd322 100644
--- a/arch/arm/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -1,22 +1,6 @@
+#include <arm/imx6qdl-dfi-fs700-m60.dtsi>
+
 / {
-	regulators {
-		compatible = "simple-bus";
-
-		dummy_reg: fixed@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "dummy-supply";
-		};
-
-		reg_usb_otg_vbus: usb_otg_vbus {
-			compatible = "regulator-fixed";
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
 	chosen {
 		linux,stdout-path = &uart1;
 
@@ -27,138 +11,16 @@
 	};
 };
 
-&ecspi3 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 24 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "sst,sst25vf040b", "m25p80";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	status = "okay";
-	phy-mode = "rgmii";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-dfi-fs700-m60 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
-				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
-				MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* SD2 card detect */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <MX6QDL_ENET_PINGRP1>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <MX6QDL_I2C2_PINGRP1>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <MX6QDL_UART1_PINGRP1>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <MX6QDL_USBOTG_PINGRP2>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <MX6QDL_USDHC2_PINGRP_D4>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <MX6QDL_USDHC3_PINGRP_D4>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <MX6QDL_USDHC4_PINGRP_D8>;
-		};
-	};
-
-	ecspi3 {
-		pinctrl_ecspi3: ecspi3_csgrp {
-			fsl,pins = <
-				MX6QDL_ECSPI3_PINGRP1
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
-			>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: pf0100@08 {
-		compatible = "pf0100-regulator";
-		reg = <0x08>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <13 8>;
-	};
-};
-
 &ocotp {
 	barebox,provide-mac-address = <&fec 0x620>;
 };
 
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
 &usbh1 {
 	phy_type = "utmi";
 	dr_mode = "host";
-	status = "okay";
 };
 
 &usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
 	phy_type = "utmi";
 	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc2 { /* module slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio2 2 0>;
-	status = "okay";
-};
-
-&usdhc3 { /* baseboard slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-};
-
-&usdhc4 { /* eMMC */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
 };