diff --git a/CHANGELOG b/CHANGELOG index 5cc42f364..dd4d246ce 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.1: ====================================================================== +* Patch by Tolunay Orkun, 14 May 2004: + Add support for Cogent CSB472 board (8MB Flash Rev) + * Patch by Thomas Viehweger, 14 May 2004: - flash.h: more flash types added - immap_8260.h: some bits added (useful for RMII) diff --git a/CREDITS b/CREDITS index 14b131bdc..e23c58d94 100644 --- a/CREDITS +++ b/CREDITS @@ -269,7 +269,7 @@ W: www.elinos.com N: Tolunay Orkun E: torkun@nextio.com -D: Support for Cogent CSB272 board +D: Support for Cogent CSB272 & CSB472 boards N: Keith Outwater E: keith_outwater@mvis.com diff --git a/MAINTAINERS b/MAINTAINERS index 9de23822d..341c97298 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -193,7 +193,8 @@ Scott McNutt EBONY PPC440GP Tolunay Orkun - csb272 PPC4xx + csb272 PPC405GP + csb472 PPC405GP Keith Outwater diff --git a/MAKEALL b/MAKEALL index f2d22bbbd..be108854b 100644 --- a/MAKEALL +++ b/MAKEALL @@ -60,13 +60,13 @@ LIST_4xx=" \ ADCIOP AR405 ASH405 BUBINGA405EP \ CANBT CPCI405 CPCI4052 CPCI405AB \ CPCI440 CPCIISER4 CRAYL1 csb272 \ - DASA_SIM DP405 DU405 EBONY \ - ERIC EXBITGEN HUB405 JSE \ - MIP405 MIP405T ML2 ml300 \ - OCOTEA OCRTC ORSG PCI405 \ - PIP405 PLU405 PMC405 PPChameleonEVB \ - VOH405 W7OLMC W7OLMG WALNUT405 \ - XPEDITE1K \ + csb472 DASA_SIM DP405 DU405 \ + EBONY ERIC EXBITGEN HUB405 \ + JSE MIP405 MIP405T ML2 \ + ml300 OCOTEA OCRTC ORSG \ + PCI405 PIP405 PLU405 PMC405 \ + PPChameleonEVB VOH405 W7OLMC W7OLMG \ + WALNUT405 XPEDITE1K \ " ######################################################################### diff --git a/Makefile b/Makefile index d17f215be..68e074539 100644 --- a/Makefile +++ b/Makefile @@ -602,6 +602,9 @@ CRAYL1_config: unconfig csb272_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx csb272 +csb472_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx csb472 + DASA_SIM_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd diff --git a/board/csb472/Makefile b/board/csb472/Makefile new file mode 100644 index 000000000..926e06503 --- /dev/null +++ b/board/csb472/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +#OBJS = $(BOARD).o flash.o +#OBJS = $(BOARD).o strataflash.o +OBJS = $(BOARD).o + +SOBJS = init.o + + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/csb472/config.mk b/board/csb472/config.mk new file mode 100644 index 000000000..04aefd1f8 --- /dev/null +++ b/board/csb472/config.mk @@ -0,0 +1,36 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2004 +# Tolunay Orkun, NextIO Inc., torkun@nextio.com. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# Cogent CSB472 board +# + +LDFLAGS += $(LINKER_UNDEFS) + +TEXT_BASE := 0xFFFC0000 +#TEXT_BASE := 0x00100000 + +PLATFORM_RELFLAGS := $(PLATFORM_RELFLAGS) diff --git a/board/csb472/csb472.c b/board/csb472/csb472.c new file mode 100644 index 000000000..97de0fd9a --- /dev/null +++ b/board/csb472/csb472.c @@ -0,0 +1,141 @@ +/* + * (C) Copyright 2004 + * Tolunay Orkun, Nextio Inc., torkun@nextio.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include <405gp_enet.h> + +/* + * board_early_init_f: do early board initialization + * + */ +int board_early_init_f(void) +{ + /*-------------------------------------------------------------------------+ + | Interrupt controller setup for the Walnut board. + | Note: IRQ 0-15 405GP internally generated; active high; level sensitive + | IRQ 16 405GP internally generated; active low; level sensitive + | IRQ 17-24 RESERVED + | IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive + | IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive + | IRQ 27 (EXT IRQ 2) Not Used + | IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive + | IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive + | IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive + | IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive + | Note for Walnut board: + | An interrupt taken for the FPGA (IRQ 25) indicates that either + | the Mouse, Keyboard, IRDA, or External Expansion caused the + | interrupt. The FPGA must be read to determine which device + | caused the interrupt. The default setting of the FPGA clears + | + +-------------------------------------------------------------------------*/ + + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (uicer, 0x00000000); /* disable all ints */ + mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ + mtdcr (uicpr, 0xFFFFFF83); /* set int polarities */ + mtdcr (uictr, 0x10000000); /* set int trigger levels */ + mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + + mtebc (epcr, 0xa8400000); /* EBC always driven */ + + return 0; /* success */ +} + +/* + * checkboard: identify/verify the board we are running + * + * Remark: we just assume it is correct board here! + * + */ +int checkboard(void) +{ + printf("BOARD: Cogent CSB472\n"); + + return 0; /* success */ +} + +/* + * initram: Determine the size of mounted DRAM + * + * Size is determined by reading SDRAM configuration registers as + * configured by initialization code + * + */ +long initdram (int board_type) +{ + ulong tot_size; + ulong bank_size; + ulong tmp; + + tot_size = 0; + + mtdcr (memcfga, mem_mb0cf); + tmp = mfdcr (memcfgd); + if (tmp & 0x00000001) { + bank_size = 0x00400000 << ((tmp >> 17) & 0x7); + tot_size += bank_size; + } + + mtdcr (memcfga, mem_mb1cf); + tmp = mfdcr (memcfgd); + if (tmp & 0x00000001) { + bank_size = 0x00400000 << ((tmp >> 17) & 0x7); + tot_size += bank_size; + } + + mtdcr (memcfga, mem_mb2cf); + tmp = mfdcr (memcfgd); + if (tmp & 0x00000001) { + bank_size = 0x00400000 << ((tmp >> 17) & 0x7); + tot_size += bank_size; + } + + mtdcr (memcfga, mem_mb3cf); + tmp = mfdcr (memcfgd); + if (tmp & 0x00000001) { + bank_size = 0x00400000 << ((tmp >> 17) & 0x7); + tot_size += bank_size; + } + + return tot_size; +} + +/* + * last_stage_init: final configurations (such as PHY etc) + * + */ +int last_stage_init(void) +{ + /* initialize the PHY */ + miiphy_reset(CONFIG_PHY_ADDR); + miiphy_write(CONFIG_PHY_ADDR, PHY_BMCR, + PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); /* AUTO neg */ + miiphy_write(CONFIG_PHY_ADDR, PHY_FCSCR, 0x0d08); /* LEDs */ + + return 0; /* success */ +} diff --git a/board/csb472/init.S b/board/csb472/init.S new file mode 100644 index 000000000..ca0241bd8 --- /dev/null +++ b/board/csb472/init.S @@ -0,0 +1,212 @@ +/****************************************************************************** + * + * This source code has been made available to you by IBM on an AS-IS + * basis. Anyone receiving this source is licensed under IBM + * copyrights to use it in any way he or she deems fit, including + * copying it, modifying it, compiling it, and redistributing it either + * with or without modifications. No license under IBM patents or + * patent applications is to be implied by the copyright license. + * + * Any user of this software should understand that IBM cannot provide + * technical support for this software and will not be responsible for + * any consequences resulting from the use of this software. + * + * Any person who transfers this source code or any derivative work + * must include the IBM copyright notice, this paragraph, and the + * preceding two paragraphs in the transferred software. + * + * COPYRIGHT I B M CORPORATION 1995 + * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M + * + *****************************************************************************/ +#include +#include + +#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ + +#include +#include + +#include +#include + +#define LI32(reg,val) \ + addis reg,0,val@h;\ + ori reg,reg,val@l + +#define WDCR_EBC(reg,val) \ + addi r4,0,reg;\ + mtdcr ebccfga,r4;\ + addis r4,0,val@h;\ + ori r4,r4,val@l;\ + mtdcr ebccfgd,r4 + +#define WDCR_SDRAM(reg,val) \ + addi r4,0,reg;\ + mtdcr memcfga,r4;\ + addis r4,0,val@h;\ + ori r4,r4,val@l;\ + mtdcr memcfgd,r4 + +/****************************************************************************** + * Function: ext_bus_cntlr_init + * + * Description: Configures EBC Controller and a few basic chip selects. + * + * CS0 is setup to get the Boot Flash out of the addresss range + * so that we may setup a stack. CS7 is setup so that we can + * access and reset the hardware watchdog. + * + * IMPORTANT: For pass1 this code must run from + * cache since you can not reliably change a peripheral banks + * timing register (pbxap) while running code from that bank. + * For ex., since we are running from ROM on bank 0, we can NOT + * execute the code that modifies bank 0 timings from ROM, so + * we run it from cache. + * + * Notes: Does NOT use the stack. + *****************************************************************************/ + .section ".text" + .align 2 + .globl ext_bus_cntlr_init + .type ext_bus_cntlr_init, @function +ext_bus_cntlr_init: + mflr r0 + /******************************************************************** + * Prefetch entire ext_bus_cntrl_init function into the icache. + * This is necessary because we are going to change the same CS we + * are executing from. Otherwise a CPU lockup may occur. + *******************************************************************/ + bl ..getAddr +..getAddr: + mflr r3 /* get address of ..getAddr */ + + /* Calculate number of cache lines for this function */ + addi r4, 0, (((.Lfe0 - ..getAddr) / CFG_CACHELINE_SIZE) + 2) + mtctr r4 +..ebcloop: + icbt r0, r3 /* prefetch cache line for addr in r3*/ + addi r3, r3, CFG_CACHELINE_SIZE /* move to next cache line */ + bdnz ..ebcloop /* continue for $CTR cache lines */ + + /******************************************************************** + * Delay to ensure all accesses to ROM are complete before changing + * bank 0 timings. 200usec should be enough. + * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles. + *******************************************************************/ + addis r3, 0, 0x0 + ori r3, r3, 0xA000 /* wait 200us from reset */ + mtctr r3 +..spinlp: + bdnz ..spinlp /* spin loop */ + + /******************************************************************** + * SETUP CPC0_CR0 + *******************************************************************/ + LI32(r4, 0x00c01030) + mtdcr cntrl0, r4 + + /******************************************************************** + * Setup CPC0_CR1: Change PCIINT signal to PerWE + *******************************************************************/ + mfdcr r4, cntrl1 + ori r4, r4, 0x4000 + mtdcr cntrl1, r4 + + /******************************************************************** + * Setup External Bus Controller (EBC). + *******************************************************************/ + WDCR_EBC(epcr, 0xd84c0000) + /******************************************************************** + * Memory Bank 0 (Intel 28F640J3 Flash) initialization + *******************************************************************/ + /*WDCR_EBC(pb0ap, 0x03055200)*/ + /*WDCR_EBC(pb0ap, 0x04055200)*/ + WDCR_EBC(pb0ap, 0x08055200) + WDCR_EBC(pb0cr, 0xff87a000) + /******************************************************************** + * Memory Bank 3 (Xilinx XC95144 CPLD) initialization + *******************************************************************/ + /*WDCR_EBC(pb3ap, 0x07869200)*/ + WDCR_EBC(pb3ap, 0x04055200) + WDCR_EBC(pb3cr, 0xff01c000) + /******************************************************************** + * Memory Bank 1,2,4-7 (Unused) initialization + *******************************************************************/ + WDCR_EBC(pb1ap, 0) + WDCR_EBC(pb1cr, 0) + WDCR_EBC(pb2ap, 0) + WDCR_EBC(pb2cr, 0) + WDCR_EBC(pb4ap, 0) + WDCR_EBC(pb4cr, 0) + WDCR_EBC(pb5ap, 0) + WDCR_EBC(pb5cr, 0) + WDCR_EBC(pb6ap, 0) + WDCR_EBC(pb6cr, 0) + WDCR_EBC(pb7ap, 0) + WDCR_EBC(pb7cr, 0) + + /* We are all done */ + mtlr r0 /* Restore link register */ + blr /* Return to calling function */ +.Lfe0: .size ext_bus_cntlr_init,.Lfe0-ext_bus_cntlr_init +/* end ext_bus_cntlr_init() */ + +/****************************************************************************** + * Function: sdram_init + * + * Description: Configures SDRAM memory banks. + * + * Notes: Does NOT use the stack. + *****************************************************************************/ + .section ".text" + .align 2 + .globl sdram_init + .type sdram_init, @function +sdram_init: + + /* + * Disable memory controller to allow + * values to be changed. + */ + WDCR_SDRAM(mem_mcopt1, 0x00000000) + + /* + * Configure Memory Banks + */ + WDCR_SDRAM(mem_mb0cf, 0x00062001) + WDCR_SDRAM(mem_mb1cf, 0x00000000) + WDCR_SDRAM(mem_mb2cf, 0x00000000) + WDCR_SDRAM(mem_mb3cf, 0x00000000) + + /* + * Set up SDTR1 (SDRAM Timing Register) + */ + WDCR_SDRAM(mem_sdtr1, 0x00854009) + + /* + * Set RTR (Refresh Timing Register) + */ + WDCR_SDRAM(mem_rtr, 0x10000000) + /* WDCR_SDRAM(mem_rtr, 0x05f00000) */ + + /******************************************************************** + * Delay to ensure 200usec have elapsed since reset. Assume worst + * case that the core is running 200Mhz: + * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles + *******************************************************************/ + addis r3, 0, 0x0000 + ori r3, r3, 0xA000 /* Wait >200us from reset */ + mtctr r3 +..spinlp2: + bdnz ..spinlp2 /* spin loop */ + + /******************************************************************** + * Set memory controller options reg, MCOPT1. + *******************************************************************/ + WDCR_SDRAM(mem_mcopt1,0x80800000) + +..sdri_done: + blr /* Return to calling function */ +.Lfe1: .size sdram_init,.Lfe1-sdram_init +/* end sdram_init() */ diff --git a/board/csb472/u-boot.lds b/board/csb472/u-boot.lds new file mode 100644 index 000000000..f3e28ae8d --- /dev/null +++ b/board/csb472/u-boot.lds @@ -0,0 +1,151 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + board/csb472/init.o (.text) + cpu/ppc4xx/kgdb.o (.text) + cpu/ppc4xx/traps.o (.text) + cpu/ppc4xx/interrupts.o (.text) + cpu/ppc4xx/serial.o (.text) + cpu/ppc4xx/cpu_init.o (.text) + cpu/ppc4xx/speed.o (.text) + cpu/ppc4xx/405gp_enet.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + + lib_ppc/extable.o (.text) + lib_ppc/board.o (.text) + lib_generic/zlib.o (.text) +/* . = env_offset;*/ +/* common/environment.o(.text)*/ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/include/configs/csb472.h b/include/configs/csb472.h new file mode 100644 index 000000000..4e5dcfcf0 --- /dev/null +++ b/include/configs/csb472.h @@ -0,0 +1,313 @@ +/* + * (C) Copyright 2004 + * Tolunay Orkun, Nextio Inc., torkun@nextio.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_405GP 1 /* This is a PPC405GP CPU */ +#define CONFIG_4xx 1 /* ...member of PPC4xx family */ +#define CONFIG_CSB472 1 /* on a Cogent CSB472 board */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f() */ +#define CONFIG_LAST_STAGE_INIT 1 /* Call last_stage_init() */ +#define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */ + +/* + * OS Bootstrap configuration + * + */ + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 3 /* autoboot after X seconds */ +#endif + +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check keypress when bootdelay = 0 */ + +#if 1 +#undef CONFIG_BOOTARGS +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs console=ttyS0,38400 debug " \ + "root=/dev/ram rw ramdisk_size=4096 " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \ + "bootm ff800000 ff900000" +#endif + +#if 0 +#undef CONFIG_BOOTARGS +#define CONFIG_BOOTCOMMAND \ + "bootp; " \ + "setenv bootargs console=ttyS0,38400 debug " \ + "root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \ + "bootm" +#endif + +/* + * BOOTP/DHCP protocol configuration + * + */ +#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \ + CONFIG_BOOTP_DNS2 | \ + CONFIG_BOOTP_BOOTFILESIZE ) +/* + * U-Boot Monitor Command Line Functions Configuration + * + */ +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_BEDBUG | \ + CFG_CMD_ELF | \ + CFG_CMD_IRQ | \ + CFG_CMD_I2C | \ + CFG_CMD_PCI | \ + CFG_CMD_DATE | \ + CFG_CMD_MII | \ + CFG_CMD_PING | \ + CFG_CMD_DHCP ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/* + * Serial download configuration + * + */ +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * KGDB Configuration + * + */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + * + */ +#undef CFG_HUSH_PARSER /* use "hush" command parser */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " /* hush shell secondary prompt */ +#endif + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CLKS_IN_HZ 1 /* everything, incl board info, in Hz */ +#define CFG_EXTBDINFO 1 /* To use extended board_info (bd_t) */ +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * watchdog configuration + * + */ +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * UART configuration + * + */ +#undef CFG_EXT_SERIAL_CLOCK /* use internal serial clock */ +#undef CFG_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ +#define CFG_BASE_BAUD 691200 +#define CONFIG_BAUDRATE 38400 /* Default baud rate */ +#define CFG_BAUDRATE_TABLE \ + { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 } + +/* + * I2C configuration + * + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_SPEED 100000 /* I2C speed */ +#define CFG_I2C_SLAVE 0x7F /* I2C slave address */ + +/* + * MII PHY configuration + * + */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0 /* PHY address */ +#define CONFIG_PHY_CMD_DELAY 40 /* PHY COMMAND delay */ + /* 32usec min. for LXT971A */ +#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */ + +/* + * RTC configuration + * + * Note that DS1307 RTC is limited to 100Khz I2C bus. + * + */ +#define CONFIG_RTC_DS1307 /* Use Dallas 1307 RTC */ + +/* + * PCI stuff + * + */ +#define CONFIG_PCI /* include pci support */ +#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ + +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + /* resource configuration */ +#undef CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ +#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ + +#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */ +#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */ +#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ +#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ +#define CFG_PCI_PTM2LA 0x00000000 /* disabled */ +#define CFG_PCI_PTM2MS 0x00000000 /* disabled */ +#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ + +/* + * IDE stuff + * + */ +#undef CONFIG_IDE_PCMCIA /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* no reset for ide supported */ + +/* + * Environment configuration + * + */ +#define CFG_ENV_IS_IN_FLASH 1 /* environment is in FLASH */ +#undef CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_EEPROM + +/* + * General Memory organization + * + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFF800000 +#define CFG_FLASH_SIZE 0x00800000 +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 KB for Monitor */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 KB for malloc() */ + +#if CFG_MONITOR_BASE < CFG_FLASH_BASE +#define CFG_RAMSTART +#endif + +#if defined(CFG_ENV_IS_IN_FLASH) +#define CFG_ENV_IN_OWN_SECTOR 1 /* Give Environment own sector */ +#define CFG_ENV_ADDR 0xFFF00000 /* Address of Environment Sector */ +#define CFG_ENV_SIZE 0x00001000 /* Size of Environment */ +#define CFG_ENV_SECT_SIZE 0x00040000 /* Size of Environment Sector */ +#endif + +/* + * FLASH Device configuration + * + */ +#define CFG_FLASH_CFI 1 /* flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* use common cfi driver */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_MAX_FLASH_BANKS 1 /* max # of memory banks */ +#define CFG_FLASH_INCREMENT 0 /* there is only one bank */ +#define CFG_MAX_FLASH_SECT 64 /* max # of sectors on one chip */ +#define CFG_FLASH_PROTECTION 1 /* hardware flash protection */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +/* + * On Chip Memory location/size + * + */ +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x1000 + +/* + * Global info and initial stack + * + */ +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of on-chip SRAM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 128 /* byte size reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/* + * Cache configuration + * + */ +#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */ + /* have only 8kB, 16kB is save here */ +#define CFG_CACHELINE_SIZE 32 + +/* + * Miscellaneous board specific definitions + * + */ +#define CONFIG_I2CFAST 1 /* enable "i2cfast" env. setting */ + +/* + * Internal Definitions + * + * Boot Flags + * + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#endif /* __CONFIG_H */