doc: start (almost) all headlines with a capital

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation/boards/omap.rst

@@ -7,8 +7,8 @@ both the first and the second stage loader. To build as a first stage loader
 build the \*_xload_defconfig for your board, for second stage build the normal
 \*_defconfig for your board.
 
-bootstrapping a panda board
----------------------------
+Bootstrapping a PandaBoard
+--------------------------
 
 The Panda board boots from SD card. The OMAP Boot ROM code loads a file named
 'MLO' on a bootable FAT partition on this card. There are several howtos and

Documentation/commands.rst

@@ -1,5 +1,5 @@
-barebox command reference
-=========================
+Command reference
+=================
 
 .. toctree::
    :glob:

Documentation/devicetree/index.rst

@@ -1,4 +1,4 @@
-barebox specific devicetree bindings
+Barebox specific devicetree bindings
 ====================================
 
 Contents:

Documentation/filesystems.rst

@@ -1,6 +1,6 @@
 .. _filesystems:
 
-filesystems
+Filesystems
 ===========
 
 .. toctree::

Documentation/filesystems/ramfs.rst

@@ -1,6 +1,6 @@
 .. index:: ramfs (filesystem)
 
-ram filesystem
+RAM filesystem
 ==============
 
 ramfs is a simple malloc based filesystem. An instance of ramfs is mounted during startup on /. The filesystemtype passed to mount is 'ramfs'

Documentation/user/booting-linux.rst

@@ -197,7 +197,7 @@ The entry can be listed with the -l option:
 When on barebox the SD card shows up as ``mmc`` then this entry can be booted with
 ``boot mmc1`` or with setting ``global.boot.default`` to ``mmc1``.
 
-network boot
+Network boot
 ------------
 
 With the following steps barebox can start the Kernel and root filesystem

Documentation/user/hush.rst

@@ -2,7 +2,7 @@
 
 .. _hush:
 
-hush shell
+Hush shell
 ==========
 
 barebox has an integrated shell: hush. This is a simple shell which
@@ -10,7 +10,7 @@ is enough for writing simple shell scripts. Usage of the shell for
 scripts should not be overstrained. Often a command written in C is
 more flexible and also more robust than a complicated shell script.
 
-hush features
+Hush features
 -------------
 
 variables::

Documentation/user/memory-areas.rst

@@ -1,4 +1,4 @@
-memory areas
+Memory areas
 ============
 
 Several barebox commands like :ref:`command_md`, erase or crc work on an area

Documentation/user/networking.rst

@@ -1,4 +1,4 @@
-networking
+Networking
 ==========
 
 barebox has IPv4 networking support. Several protocols such as

Documentation/user/user-manual.rst

@@ -1,7 +1,7 @@
 .. highlight:: console
 
-barebox user manual
-===================
+User manual
+===========
 
 Contents: