diff --git a/CHANGELOG b/CHANGELOG
index 83069fe5f..63b23c132 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,14 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Adjust TQM5200 make targets
+  Make the automatic CS configuration the default.
+  The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
+  and CONFIG_TQM5200_AC are removed.
+  "TQM5200_config" is now the default for STK52XX.200 base boards.
+  On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
+  Patch by Martin Krause, 07 Nov 2005
+
 * Fix setting of environment variable "ver" on trab board
   The environment variable "ver" is now set before
   do_auto_update() is called, so that "ver" can be used
diff --git a/MAKEALL b/MAKEALL
index 6778b3bd2..0594c9372 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -28,7 +28,7 @@ LIST_5xxx="	\
 	BC3450		cpci5200	EVAL5200	icecube_5100	\
 	icecube_5200	lite5200b	mcc200		o2dnt		\
 	pf5200		PM520		Total5100	Total5200	\
-	Total5200_Rev2	TQM5200_auto					\
+	Total5200_Rev2	TQM5200						\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 440ab2c62..7e50fbe73 100644
--- a/Makefile
+++ b/Makefile
@@ -356,8 +356,8 @@ smmaco4_config: unconfig
 	@./mkconfig -a smmaco4 ppc mpc5xxx tqm5200
 
 spieval_config:	unconfig
-	echo "#define CONFIG_CS_AUTOCONF">>include/config.h
-	echo "... with automatic CS configuration"
+	@echo "#define CONFIG_CS_AUTOCONF">>include/config.h
+	@echo "... with automatic CS configuration"
 	@./mkconfig -a spieval ppc mpc5xxx tqm5200
 
 MINI5200_config	\
@@ -394,35 +394,20 @@ Total5200_Rev2_lowboot_config:	unconfig
 		}
 	@./mkconfig -a Total5200 ppc mpc5xxx total5200
 
-TQM5200_auto_config	\
-TQM5200_AA_config	\
-TQM5200_AB_config	\
-TQM5200_AC_config	\
+TQM5200_config	\
+TQM5200_STK100_config \
 MiniFAP_config:	unconfig
 	@ >include/config.h
 	@[ -z "$(findstring MiniFAP,$@)" ] || \
 		{ echo "#define CONFIG_MINIFAP"	>>include/config.h ; \
-		  echo "#define CONFIG_TQM5200_AC"	>>include/config.h ; \
 		  echo "... TQM5200_AC on MiniFAP" ; \
 		}
-	@[ -z "$(findstring AA,$@)" ] || \
-		{ echo "#define CONFIG_TQM5200_AA"	>>include/config.h ; \
-		  echo "... with 4 MB Flash, 16 MB SDRAM, 32 kB EEPROM" ; \
-		}
-	@[ -z "$(findstring AB,$@)" ] || \
-		{ echo "#define CONFIG_TQM5200_AB"	>>include/config.h ; \
-		  echo "... with 64 MB Flash, 64 MB SDRAM, 32 kB EEPROM, 512 kB SRAM" ; \
-		  echo "... with Graphics Controller"; \
-		}
-	@[ -z "$(findstring AC,$@)" ] || \
-		{ echo "#define CONFIG_TQM5200_AC"	>>include/config.h ; \
-		  echo "... with 4 MB Flash, 128 MB SDRAM" ; \
-		  echo "... with Graphics Controller"; \
-		}
-	@[ -z "$(findstring auto,$@)" ] || \
-		{ echo "#define CONFIG_CS_AUTOCONF"	>>include/config.h ; \
-		  echo "... with automatic CS configuration" ; \
+	@[ -z "$(findstring STK100,$@)" ] || \
+		{ echo "#define CONFIG_STK52XX_REV100"	>>include/config.h ; \
+		  echo "... on a STK52XX.100 base board" ; \
 		}
+	@echo "#define CONFIG_CS_AUTOCONF">>include/config.h ;
+	@echo "... with automatic CS configuration" ;
 	@./mkconfig -a TQM5200 ppc mpc5xxx tqm5200
 
 #########################################################################
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 6aad920ed..310abd2b8 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -254,13 +254,7 @@ int checkboard (void)
 	puts ("Board: AEVFIFO\n");
 	return 0;
 #endif
-#if defined (CONFIG_TQM5200_AA)
-	puts ("Board: TQM5200-AA (TQ-Components GmbH)\n");
-#elif defined (CONFIG_TQM5200_AB)
-	puts ("Board: TQM5200-AB (TQ-Components GmbH)\n");
-#elif defined (CONFIG_TQM5200_AC)
-	puts ("Board: TQM5200-AC (TQ-Components GmbH)\n");
-#elif defined (CONFIG_TQM5200)
+#if defined (CONFIG_TQM5200)
 	puts ("Board: TQM5200 (TQ-Components GmbH)\n");
 #endif
 #if defined (CONFIG_STK52XX)
@@ -572,17 +566,7 @@ static const SMI_REGS init_regs [] =
 void video_get_info_str (int line_number, char *info)
 {
 	if (line_number == 1) {
-#if defined (CONFIG_TQM5200_AA)
-		strcpy (info, " Board: TQM5200-AA (TQ-Components GmbH)");
-#elif defined (CONFIG_TQM5200_AB)
-		strcpy (info, " Board: TQM5200-AB (TQ-Components GmbH)");
-#elif defined (CONFIG_TQM5200_AC)
-		strcpy (info, " Board: TQM5200-AC (TQ-Components GmbH)");
-#elif defined (CONFIG_TQM5200)
-		strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
-#else
-#error No supported board selected
-#endif
+	strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
 #if defined (CONFIG_STK52XX)
 	} else if (line_number == 2) {
 		strcpy (info, "        on a STK52XX baseboard");
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 6020998ae..6b8759f2b 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -37,7 +37,6 @@
 #define CONFIG_TQM5200		1	/* ... on TQM5200 module */
 #undef CONFIG_TQM5200_REV100		/*  define for revision 100 modules */
 #define CONFIG_STK52XX		1	/* ... on a STK52XX base board */
-#define CONFIG_STK52XX_REV100	1	/*  define for revision 100 baseboards */
 
 #define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
@@ -83,7 +82,7 @@
 #define CONFIG_PCI_IO_SIZE	0x01000000
 
 #define CONFIG_NET_MULTI	1
-#define CONFIG_EEPRO100
+#define CONFIG_EEPRO100		1
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 #endif	/* CONFIG_STK52XX */
@@ -192,16 +191,6 @@
 
 #undef	CONFIG_BOOTARGS
 
-#if defined (CONFIG_TQM5200_AA)
-# define CONFIG_U_BOOT_SUFFIX	"-AA\0"
-#elif defined (CONFIG_TQM5200_AB)
-# define CONFIG_U_BOOT_SUFFIX	"-AB\0"
-#elif defined (CONFIG_TQM5200_AC)
-# define CONFIG_U_BOOT_SUFFIX	"-AC\0"
-#else
-# define CONFIG_U_BOOT_SUFFIX	"\0"
-#endif
-
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
@@ -218,7 +207,7 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"bootfile=/tftpboot/tqm5200/uImage\0"				\
 	"load=tftp 200000 ${u-boot}\0"					\
-	"u-boot=/tftpboot/tqm5200/u-boot.bin"	CONFIG_U_BOOT_SUFFIX	\
+	"u-boot=/tftpboot/tqm5200/u-boot.bin\0"				\
 	"update=protect off FC000000 FC05FFFF;"				\
 		"erase FC000000 FC05FFFF;"				\
 		"cp.b 200000 FC000000 ${filesize};"			\
@@ -284,13 +273,6 @@
 #endif
 
 /* List of I2C addresses to be verified by POST */
-#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB)
-#define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
-				CFG_I2C_SLAVE }
-#elif defined (CONFIG_TQM5200_AC)
-#define I2C_ADDR_LIST	{	CFG_I2C_SLAVE }
-#endif
-
 #if defined (CONFIG_MINIFAP)
 #undef I2C_ADDR_LIST
 #define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
@@ -493,13 +475,9 @@
  * SRAM - Do not map below 2 GB in address space, because this area is used
  * for SDRAM autosizing.
  */
-#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
 #define CFG_CS2_START		0xE5000000
-#ifdef CONFIG_TQM5200_AB
-#define CFG_CS2_SIZE		0x80000		/* 512 kByte */
-#else  /* CONFIG_CS_AUTOCONF */
 #define CFG_CS2_SIZE		0x100000	/* 1 MByte */
-#endif
 #define CFG_CS2_CFG		0x0004D930
 #endif
 
@@ -507,8 +485,7 @@
  * Grafic controller - Do not map below 2 GB in address space, because this
  * area is used for SDRAM autosizing.
  */
-#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \
-    defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
 #define SM501_FB_BASE		0xE0000000
 #define CFG_CS1_START		(SM501_FB_BASE)
 #define CFG_CS1_SIZE		0x4000000	/* 64 MByte */
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 96cb6e4c7..9ebb51e0a 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -191,16 +191,6 @@
 
 #undef	CONFIG_BOOTARGS
 
-#if defined (CONFIG_TQM5200_AA)
-# define CONFIG_U_BOOT_SUFFIX	"-AA\0"
-#elif defined (CONFIG_TQM5200_AB)
-# define CONFIG_U_BOOT_SUFFIX	"-AB\0"
-#elif defined (CONFIG_TQM5200_AC)
-# define CONFIG_U_BOOT_SUFFIX	"-AC\0"
-#else
-# define CONFIG_U_BOOT_SUFFIX	"\0"
-#endif
-
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
@@ -217,7 +207,7 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"bootfile=/tftpboot/tqm5200/uImage\0"				\
 	"load=tftp 200000 ${u-boot}\0"					\
-	"u-boot=/tftpboot/tqm5200/u-boot.bin"	CONFIG_U_BOOT_SUFFIX	\
+	"u-boot=/tftpboot/tqm5200/u-boot.bin\0"				\
 	"update=protect off FC000000 FC05FFFF;"				\
 		"erase FC000000 FC05FFFF;"				\
 		"cp.b 200000 FC000000 ${filesize};"			\
@@ -283,13 +273,6 @@
 #endif
 
 /* List of I2C addresses to be verified by POST */
-#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB)
-#define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
-				CFG_I2C_SLAVE }
-#elif defined (CONFIG_TQM5200_AC)
-#define I2C_ADDR_LIST	{	CFG_I2C_SLAVE }
-#endif
-
 #if defined (CONFIG_MINIFAP)
 #undef I2C_ADDR_LIST
 #define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
@@ -478,13 +461,9 @@
  * SRAM - Do not map below 2 GB in address space, because this area is used
  * for SDRAM autosizing.
  */
-#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
 #define CFG_CS2_START		0xE5000000
-#ifdef CONFIG_TQM5200_AB
-#define CFG_CS2_SIZE		0x80000		/* 512 kByte */
-#else  /* CONFIG_CS_AUTOCONF */
 #define CFG_CS2_SIZE		0x100000	/* 1 MByte */
-#endif
 #define CFG_CS2_CFG		0x0004D930
 #endif
 
@@ -492,8 +471,7 @@
  * Grafic controller - Do not map below 2 GB in address space, because this
  * area is used for SDRAM autosizing.
  */
-#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \
-    defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
 #define SM501_FB_BASE		0xE0000000
 #define CFG_CS1_START		(SM501_FB_BASE)
 #define CFG_CS1_SIZE		0x4000000	/* 64 MByte */