From cedcb274ae714aa0f1f38266ee27a575087ca715 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 12 Oct 2007 10:04:54 +0200 Subject: [PATCH] add NAND Flash support. Initial import from u-boot-1.2.0 --- drivers/nand/Makefile | 7 + drivers/nand/diskonchip.c | 1787 +++++++++++++++++++++++++ drivers/nand/nand.c | 79 ++ drivers/nand/nand_base.c | 2665 +++++++++++++++++++++++++++++++++++++ drivers/nand/nand_bbt.c | 1048 +++++++++++++++ drivers/nand/nand_ecc.c | 241 ++++ drivers/nand/nand_ids.c | 125 ++ drivers/nand/nand_util.c | 858 ++++++++++++ include/nand.h | 124 ++ 9 files changed, 6934 insertions(+) create mode 100644 drivers/nand/Makefile create mode 100644 drivers/nand/diskonchip.c create mode 100644 drivers/nand/nand.c create mode 100644 drivers/nand/nand_base.c create mode 100644 drivers/nand/nand_bbt.c create mode 100644 drivers/nand/nand_ecc.c create mode 100644 drivers/nand/nand_ids.c create mode 100644 drivers/nand/nand_util.c create mode 100644 include/nand.h diff --git a/drivers/nand/Makefile b/drivers/nand/Makefile new file mode 100644 index 000000000..487b36f0f --- /dev/null +++ b/drivers/nand/Makefile @@ -0,0 +1,7 @@ + +obj-$(CONFIG_NAND) += nand_base.o +obj-$(CONFIG_NAND) += nand_bbt.o +obj-$(CONFIG_NAND) += nand.o +obj-$(CONFIG_NAND) += nand_ecc.o +obj-$(CONFIG_NAND) += nand_ids.o +obj-$(CONFIG_NAND) += nand_util.o diff --git a/drivers/nand/diskonchip.c b/drivers/nand/diskonchip.c new file mode 100644 index 000000000..e17af70d0 --- /dev/null +++ b/drivers/nand/diskonchip.c @@ -0,0 +1,1787 @@ +/* + * drivers/mtd/nand/diskonchip.c + * + * (C) 2003 Red Hat, Inc. + * (C) 2004 Dan Brown + * (C) 2004 Kalev Lember + * + * Author: David Woodhouse + * Additional Diskonchip 2000 and Millennium support by Dan Brown + * Diskonchip Millennium Plus support by Kalev Lember + * + * Error correction code lifted from the old docecc code + * Author: Fabrice Bellard (fabrice.bellard@netgem.com) + * Copyright (C) 2000 Netgem S.A. + * converted to the generic Reed-Solomon library by Thomas Gleixner + * + * Interface to generic NAND code for M-Systems DiskOnChip devices + * + * $Id: diskonchip.c,v 1.45 2005/01/05 18:05:14 dwmw2 Exp $ + */ + +#include + +#if !defined(CFG_NAND_LEGACY) + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +/* Where to look for the devices? */ +#ifndef CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS +#define CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS 0 +#endif + +static unsigned long __initdata doc_locations[] = { +#if defined (__alpha__) || defined(__i386__) || defined(__x86_64__) +#ifdef CONFIG_MTD_DISKONCHIP_PROBE_HIGH + 0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000, + 0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000, + 0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000, + 0xfffe0000, 0xfffe2000, 0xfffe4000, 0xfffe6000, + 0xfffe8000, 0xfffea000, 0xfffec000, 0xfffee000, +#else /* CONFIG_MTD_DOCPROBE_HIGH */ + 0xc8000, 0xca000, 0xcc000, 0xce000, + 0xd0000, 0xd2000, 0xd4000, 0xd6000, + 0xd8000, 0xda000, 0xdc000, 0xde000, + 0xe0000, 0xe2000, 0xe4000, 0xe6000, + 0xe8000, 0xea000, 0xec000, 0xee000, +#endif /* CONFIG_MTD_DOCPROBE_HIGH */ +#elif defined(__PPC__) + 0xe4000000, +#elif defined(CONFIG_MOMENCO_OCELOT) + 0x2f000000, + 0xff000000, +#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C) + 0xff000000, +##else +#warning Unknown architecture for DiskOnChip. No default probe locations defined +#endif + 0xffffffff }; + +static struct mtd_info *doclist = NULL; + +struct doc_priv { + void __iomem *virtadr; + unsigned long physadr; + u_char ChipID; + u_char CDSNControl; + int chips_per_floor; /* The number of chips detected on each floor */ + int curfloor; + int curchip; + int mh0_page; + int mh1_page; + struct mtd_info *nextdoc; +}; + +/* Max number of eraseblocks to scan (from start of device) for the (I)NFTL + MediaHeader. The spec says to just keep going, I think, but that's just + silly. */ +#define MAX_MEDIAHEADER_SCAN 8 + +/* This is the syndrome computed by the HW ecc generator upon reading an empty + page, one with all 0xff for data and stored ecc code. */ +static u_char empty_read_syndrome[6] = { 0x26, 0xff, 0x6d, 0x47, 0x73, 0x7a }; +/* This is the ecc value computed by the HW ecc generator upon writing an empty + page, one with all 0xff for data. */ +static u_char empty_write_ecc[6] = { 0x4b, 0x00, 0xe2, 0x0e, 0x93, 0xf7 }; + +#define INFTL_BBT_RESERVED_BLOCKS 4 + +#define DoC_is_MillenniumPlus(doc) ((doc)->ChipID == DOC_ChipID_DocMilPlus16 || (doc)->ChipID == DOC_ChipID_DocMilPlus32) +#define DoC_is_Millennium(doc) ((doc)->ChipID == DOC_ChipID_DocMil) +#define DoC_is_2000(doc) ((doc)->ChipID == DOC_ChipID_Doc2k) + +static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd); +static void doc200x_select_chip(struct mtd_info *mtd, int chip); + +static int debug=0; +module_param(debug, int, 0); + +static int try_dword=1; +module_param(try_dword, int, 0); + +static int no_ecc_failures=0; +module_param(no_ecc_failures, int, 0); + +#ifdef CONFIG_MTD_PARTITIONS +static int no_autopart=0; +module_param(no_autopart, int, 0); +#endif + +#ifdef MTD_NAND_DISKONCHIP_BBTWRITE +static int inftl_bbt_write=1; +#else +static int inftl_bbt_write=0; +#endif +module_param(inftl_bbt_write, int, 0); + +static unsigned long doc_config_location = CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS; +module_param(doc_config_location, ulong, 0); +MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip"); + + +/* Sector size for HW ECC */ +#define SECTOR_SIZE 512 +/* The sector bytes are packed into NB_DATA 10 bit words */ +#define NB_DATA (((SECTOR_SIZE + 1) * 8 + 6) / 10) +/* Number of roots */ +#define NROOTS 4 +/* First consective root */ +#define FCR 510 +/* Number of symbols */ +#define NN 1023 + +/* the Reed Solomon control structure */ +static struct rs_control *rs_decoder; + +/* + * The HW decoder in the DoC ASIC's provides us a error syndrome, + * which we must convert to a standard syndrom usable by the generic + * Reed-Solomon library code. + * + * Fabrice Bellard figured this out in the old docecc code. I added + * some comments, improved a minor bit and converted it to make use + * of the generic Reed-Solomon libary. tglx + */ +static int doc_ecc_decode (struct rs_control *rs, uint8_t *data, uint8_t *ecc) +{ + int i, j, nerr, errpos[8]; + uint8_t parity; + uint16_t ds[4], s[5], tmp, errval[8], syn[4]; + + /* Convert the ecc bytes into words */ + ds[0] = ((ecc[4] & 0xff) >> 0) | ((ecc[5] & 0x03) << 8); + ds[1] = ((ecc[5] & 0xfc) >> 2) | ((ecc[2] & 0x0f) << 6); + ds[2] = ((ecc[2] & 0xf0) >> 4) | ((ecc[3] & 0x3f) << 4); + ds[3] = ((ecc[3] & 0xc0) >> 6) | ((ecc[0] & 0xff) << 2); + parity = ecc[1]; + + /* Initialize the syndrom buffer */ + for (i = 0; i < NROOTS; i++) + s[i] = ds[0]; + /* + * Evaluate + * s[i] = ds[3]x^3 + ds[2]x^2 + ds[1]x^1 + ds[0] + * where x = alpha^(FCR + i) + */ + for(j = 1; j < NROOTS; j++) { + if(ds[j] == 0) + continue; + tmp = rs->index_of[ds[j]]; + for(i = 0; i < NROOTS; i++) + s[i] ^= rs->alpha_to[rs_modnn(rs, tmp + (FCR + i) * j)]; + } + + /* Calc s[i] = s[i] / alpha^(v + i) */ + for (i = 0; i < NROOTS; i++) { + if (syn[i]) + syn[i] = rs_modnn(rs, rs->index_of[s[i]] + (NN - FCR - i)); + } + /* Call the decoder library */ + nerr = decode_rs16(rs, NULL, NULL, 1019, syn, 0, errpos, 0, errval); + + /* Incorrectable errors ? */ + if (nerr < 0) + return nerr; + + /* + * Correct the errors. The bitpositions are a bit of magic, + * but they are given by the design of the de/encoder circuit + * in the DoC ASIC's. + */ + for(i = 0;i < nerr; i++) { + int index, bitpos, pos = 1015 - errpos[i]; + uint8_t val; + if (pos >= NB_DATA && pos < 1019) + continue; + if (pos < NB_DATA) { + /* extract bit position (MSB first) */ + pos = 10 * (NB_DATA - 1 - pos) - 6; + /* now correct the following 10 bits. At most two bytes + can be modified since pos is even */ + index = (pos >> 3) ^ 1; + bitpos = pos & 7; + if ((index >= 0 && index < SECTOR_SIZE) || + index == (SECTOR_SIZE + 1)) { + val = (uint8_t) (errval[i] >> (2 + bitpos)); + parity ^= val; + if (index < SECTOR_SIZE) + data[index] ^= val; + } + index = ((pos >> 3) + 1) ^ 1; + bitpos = (bitpos + 10) & 7; + if (bitpos == 0) + bitpos = 8; + if ((index >= 0 && index < SECTOR_SIZE) || + index == (SECTOR_SIZE + 1)) { + val = (uint8_t)(errval[i] << (8 - bitpos)); + parity ^= val; + if (index < SECTOR_SIZE) + data[index] ^= val; + } + } + } + /* If the parity is wrong, no rescue possible */ + return parity ? -1 : nerr; +} + +static void DoC_Delay(struct doc_priv *doc, unsigned short cycles) +{ + volatile char dummy; + int i; + + for (i = 0; i < cycles; i++) { + if (DoC_is_Millennium(doc)) + dummy = ReadDOC(doc->virtadr, NOP); + else if (DoC_is_MillenniumPlus(doc)) + dummy = ReadDOC(doc->virtadr, Mplus_NOP); + else + dummy = ReadDOC(doc->virtadr, DOCStatus); + } + +} + +#define CDSN_CTRL_FR_B_MASK (CDSN_CTRL_FR_B0 | CDSN_CTRL_FR_B1) + +/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */ +static int _DoC_WaitReady(struct doc_priv *doc) +{ + void __iomem *docptr = doc->virtadr; + unsigned long timeo = jiffies + (HZ * 10); + + if(debug) printk("_DoC_WaitReady...\n"); + /* Out-of-line routine to wait for chip response */ + if (DoC_is_MillenniumPlus(doc)) { + while ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) { + if (time_after(jiffies, timeo)) { + printk("_DoC_WaitReady timed out.\n"); + return -EIO; + } + udelay(1); + cond_resched(); + } + } else { + while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) { + if (time_after(jiffies, timeo)) { + printk("_DoC_WaitReady timed out.\n"); + return -EIO; + } + udelay(1); + cond_resched(); + } + } + + return 0; +} + +static inline int DoC_WaitReady(struct doc_priv *doc) +{ + void __iomem *docptr = doc->virtadr; + int ret = 0; + + if (DoC_is_MillenniumPlus(doc)) { + DoC_Delay(doc, 4); + + if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) + /* Call the out-of-line routine to wait */ + ret = _DoC_WaitReady(doc); + } else { + DoC_Delay(doc, 4); + + if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) + /* Call the out-of-line routine to wait */ + ret = _DoC_WaitReady(doc); + DoC_Delay(doc, 2); + } + + if(debug) printk("DoC_WaitReady OK\n"); + return ret; +} + +static void doc2000_write_byte(struct mtd_info *mtd, u_char datum) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + + if(debug)printk("write_byte %02x\n", datum); + WriteDOC(datum, docptr, CDSNSlowIO); + WriteDOC(datum, docptr, 2k_CDSN_IO); +} + +static u_char doc2000_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + u_char ret; + + ReadDOC(docptr, CDSNSlowIO); + DoC_Delay(doc, 2); + ret = ReadDOC(docptr, 2k_CDSN_IO); + if (debug) printk("read_byte returns %02x\n", ret); + return ret; +} + +static void doc2000_writebuf(struct mtd_info *mtd, + const u_char *buf, int len) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + int i; + if (debug)printk("writebuf of %d bytes: ", len); + for (i=0; i < len; i++) { + WriteDOC_(buf[i], docptr, DoC_2k_CDSN_IO + i); + if (debug && i < 16) + printk("%02x ", buf[i]); + } + if (debug) printk("\n"); +} + +static void doc2000_readbuf(struct mtd_info *mtd, + u_char *buf, int len) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + int i; + + if (debug)printk("readbuf of %d bytes: ", len); + + for (i=0; i < len; i++) { + buf[i] = ReadDOC(docptr, 2k_CDSN_IO + i); + } +} + +static void doc2000_readbuf_dword(struct mtd_info *mtd, + u_char *buf, int len) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + int i; + + if (debug) printk("readbuf_dword of %d bytes: ", len); + + if (unlikely((((unsigned long)buf)|len) & 3)) { + for (i=0; i < len; i++) { + *(uint8_t *)(&buf[i]) = ReadDOC(docptr, 2k_CDSN_IO + i); + } + } else { + for (i=0; i < len; i+=4) { + *(uint32_t*)(&buf[i]) = readl(docptr + DoC_2k_CDSN_IO + i); + } + } +} + +static int doc2000_verifybuf(struct mtd_info *mtd, + const u_char *buf, int len) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + int i; + + for (i=0; i < len; i++) + if (buf[i] != ReadDOC(docptr, 2k_CDSN_IO)) + return -EFAULT; + return 0; +} + +static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + uint16_t ret; + + doc200x_select_chip(mtd, nr); + doc200x_hwcontrol(mtd, NAND_CTL_SETCLE); + this->write_byte(mtd, NAND_CMD_READID); + doc200x_hwcontrol(mtd, NAND_CTL_CLRCLE); + doc200x_hwcontrol(mtd, NAND_CTL_SETALE); + this->write_byte(mtd, 0); + doc200x_hwcontrol(mtd, NAND_CTL_CLRALE); + + ret = this->read_byte(mtd) << 8; + ret |= this->read_byte(mtd); + + if (doc->ChipID == DOC_ChipID_Doc2k && try_dword && !nr) { + /* First chip probe. See if we get same results by 32-bit access */ + union { + uint32_t dword; + uint8_t byte[4]; + } ident; + void __iomem *docptr = doc->virtadr; + + doc200x_hwcontrol(mtd, NAND_CTL_SETCLE); + doc2000_write_byte(mtd, NAND_CMD_READID); + doc200x_hwcontrol(mtd, NAND_CTL_CLRCLE); + doc200x_hwcontrol(mtd, NAND_CTL_SETALE); + doc2000_write_byte(mtd, 0); + doc200x_hwcontrol(mtd, NAND_CTL_CLRALE); + + ident.dword = readl(docptr + DoC_2k_CDSN_IO); + if (((ident.byte[0] << 8) | ident.byte[1]) == ret) { + printk(KERN_INFO "DiskOnChip 2000 responds to DWORD access\n"); + this->read_buf = &doc2000_readbuf_dword; + } + } + + return ret; +} + +static void __init doc2000_count_chips(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + uint16_t mfrid; + int i; + + /* Max 4 chips per floor on DiskOnChip 2000 */ + doc->chips_per_floor = 4; + + /* Find out what the first chip is */ + mfrid = doc200x_ident_chip(mtd, 0); + + /* Find how many chips in each floor. */ + for (i = 1; i < 4; i++) { + if (doc200x_ident_chip(mtd, i) != mfrid) + break; + } + doc->chips_per_floor = i; + printk(KERN_DEBUG "Detected %d chips per floor.\n", i); +} + +static int doc200x_wait(struct mtd_info *mtd, struct nand_chip *this, int state) +{ + struct doc_priv *doc = this->priv; + + int status; + + DoC_WaitReady(doc); + this->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); + DoC_WaitReady(doc); + status = (int)this->read_byte(mtd); + + return status; +} + +static void doc2001_write_byte(struct mtd_info *mtd, u_char datum) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + + WriteDOC(datum, docptr, CDSNSlowIO); + WriteDOC(datum, docptr, Mil_CDSN_IO); + WriteDOC(datum, docptr, WritePipeTerm); +} + +static u_char doc2001_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + + /*ReadDOC(docptr, CDSNSlowIO); */ + /* 11.4.5 -- delay twice to allow extended length cycle */ + DoC_Delay(doc, 2); + ReadDOC(docptr, ReadPipeInit); + /*return ReadDOC(docptr, Mil_CDSN_IO); */ + return ReadDOC(docptr, LastDataRead); +} + +static void doc2001_writebuf(struct mtd_info *mtd, + const u_char *buf, int len) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + int i; + + for (i=0; i < len; i++) + WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i); + /* Terminate write pipeline */ + WriteDOC(0x00, docptr, WritePipeTerm); +} + +static void doc2001_readbuf(struct mtd_info *mtd, + u_char *buf, int len) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + int i; + + /* Start read pipeline */ + ReadDOC(docptr, ReadPipeInit); + + for (i=0; i < len-1; i++) + buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff)); + + /* Terminate read pipeline */ + buf[i] = ReadDOC(docptr, LastDataRead); +} + +static int doc2001_verifybuf(struct mtd_info *mtd, + const u_char *buf, int len) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + int i; + + /* Start read pipeline */ + ReadDOC(docptr, ReadPipeInit); + + for (i=0; i < len-1; i++) + if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) { + ReadDOC(docptr, LastDataRead); + return i; + } + if (buf[i] != ReadDOC(docptr, LastDataRead)) + return i; + return 0; +} + +static u_char doc2001plus_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + u_char ret; + + ReadDOC(docptr, Mplus_ReadPipeInit); + ReadDOC(docptr, Mplus_ReadPipeInit); + ret = ReadDOC(docptr, Mplus_LastDataRead); + if (debug) printk("read_byte returns %02x\n", ret); + return ret; +} + +static void doc2001plus_writebuf(struct mtd_info *mtd, + const u_char *buf, int len) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + int i; + + if (debug)printk("writebuf of %d bytes: ", len); + for (i=0; i < len; i++) { + WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i); + if (debug && i < 16) + printk("%02x ", buf[i]); + } + if (debug) printk("\n"); +} + +static void doc2001plus_readbuf(struct mtd_info *mtd, + u_char *buf, int len) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + int i; + + if (debug)printk("readbuf of %d bytes: ", len); + + /* Start read pipeline */ + ReadDOC(docptr, Mplus_ReadPipeInit); + ReadDOC(docptr, Mplus_ReadPipeInit); + + for (i=0; i < len-2; i++) { + buf[i] = ReadDOC(docptr, Mil_CDSN_IO); + if (debug && i < 16) + printk("%02x ", buf[i]); + } + + /* Terminate read pipeline */ + buf[len-2] = ReadDOC(docptr, Mplus_LastDataRead); + if (debug && i < 16) + printk("%02x ", buf[len-2]); + buf[len-1] = ReadDOC(docptr, Mplus_LastDataRead); + if (debug && i < 16) + printk("%02x ", buf[len-1]); + if (debug) printk("\n"); +} + +static int doc2001plus_verifybuf(struct mtd_info *mtd, + const u_char *buf, int len) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + int i; + + if (debug)printk("verifybuf of %d bytes: ", len); + + /* Start read pipeline */ + ReadDOC(docptr, Mplus_ReadPipeInit); + ReadDOC(docptr, Mplus_ReadPipeInit); + + for (i=0; i < len-2; i++) + if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) { + ReadDOC(docptr, Mplus_LastDataRead); + ReadDOC(docptr, Mplus_LastDataRead); + return i; + } + if (buf[len-2] != ReadDOC(docptr, Mplus_LastDataRead)) + return len-2; + if (buf[len-1] != ReadDOC(docptr, Mplus_LastDataRead)) + return len-1; + return 0; +} + +static void doc2001plus_select_chip(struct mtd_info *mtd, int chip) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + int floor = 0; + + if(debug)printk("select chip (%d)\n", chip); + + if (chip == -1) { + /* Disable flash internally */ + WriteDOC(0, docptr, Mplus_FlashSelect); + return; + } + + floor = chip / doc->chips_per_floor; + chip -= (floor * doc->chips_per_floor); + + /* Assert ChipEnable and deassert WriteProtect */ + WriteDOC((DOC_FLASH_CE), docptr, Mplus_FlashSelect); + this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + + doc->curchip = chip; + doc->curfloor = floor; +} + +static void doc200x_select_chip(struct mtd_info *mtd, int chip) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + int floor = 0; + + if(debug)printk("select chip (%d)\n", chip); + + if (chip == -1) + return; + + floor = chip / doc->chips_per_floor; + chip -= (floor * doc->chips_per_floor); + + /* 11.4.4 -- deassert CE before changing chip */ + doc200x_hwcontrol(mtd, NAND_CTL_CLRNCE); + + WriteDOC(floor, docptr, FloorSelect); + WriteDOC(chip, docptr, CDSNDeviceSelect); + + doc200x_hwcontrol(mtd, NAND_CTL_SETNCE); + + doc->curchip = chip; + doc->curfloor = floor; +} + +static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + + switch(cmd) { + case NAND_CTL_SETNCE: + doc->CDSNControl |= CDSN_CTRL_CE; + break; + case NAND_CTL_CLRNCE: + doc->CDSNControl &= ~CDSN_CTRL_CE; + break; + case NAND_CTL_SETCLE: + doc->CDSNControl |= CDSN_CTRL_CLE; + break; + case NAND_CTL_CLRCLE: + doc->CDSNControl &= ~CDSN_CTRL_CLE; + break; + case NAND_CTL_SETALE: + doc->CDSNControl |= CDSN_CTRL_ALE; + break; + case NAND_CTL_CLRALE: + doc->CDSNControl &= ~CDSN_CTRL_ALE; + break; + case NAND_CTL_SETWP: + doc->CDSNControl |= CDSN_CTRL_WP; + break; + case NAND_CTL_CLRWP: + doc->CDSNControl &= ~CDSN_CTRL_WP; + break; + } + if (debug)printk("hwcontrol(%d): %02x\n", cmd, doc->CDSNControl); + WriteDOC(doc->CDSNControl, docptr, CDSNControl); + /* 11.4.3 -- 4 NOPs after CSDNControl write */ + DoC_Delay(doc, 4); +} + +static void doc2001plus_command (struct mtd_info *mtd, unsigned command, int column, int page_addr) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + + /* + * Must terminate write pipeline before sending any commands + * to the device. + */ + if (command == NAND_CMD_PAGEPROG) { + WriteDOC(0x00, docptr, Mplus_WritePipeTerm); + WriteDOC(0x00, docptr, Mplus_WritePipeTerm); + } + + /* + * Write out the command to the device. + */ + if (command == NAND_CMD_SEQIN) { + int readcmd; + + if (column >= mtd->oobblock) { + /* OOB area */ + column -= mtd->oobblock; + readcmd = NAND_CMD_READOOB; + } else if (column < 256) { + /* First 256 bytes --> READ0 */ + readcmd = NAND_CMD_READ0; + } else { + column -= 256; + readcmd = NAND_CMD_READ1; + } + WriteDOC(readcmd, docptr, Mplus_FlashCmd); + } + WriteDOC(command, docptr, Mplus_FlashCmd); + WriteDOC(0, docptr, Mplus_WritePipeTerm); + WriteDOC(0, docptr, Mplus_WritePipeTerm); + + if (column != -1 || page_addr != -1) { + /* Serially input address */ + if (column != -1) { + /* Adjust columns for 16 bit buswidth */ + if (this->options & NAND_BUSWIDTH_16) + column >>= 1; + WriteDOC(column, docptr, Mplus_FlashAddress); + } + if (page_addr != -1) { + WriteDOC((unsigned char) (page_addr & 0xff), docptr, Mplus_FlashAddress); + WriteDOC((unsigned char) ((page_addr >> 8) & 0xff), docptr, Mplus_FlashAddress); + /* One more address cycle for higher density devices */ + if (this->chipsize & 0x0c000000) { + WriteDOC((unsigned char) ((page_addr >> 16) & 0x0f), docptr, Mplus_FlashAddress); + printk("high density\n"); + } + } + WriteDOC(0, docptr, Mplus_WritePipeTerm); + WriteDOC(0, docptr, Mplus_WritePipeTerm); + /* deassert ALE */ + if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 || command == NAND_CMD_READOOB || command == NAND_CMD_READID) + WriteDOC(0, docptr, Mplus_FlashControl); + } + + /* + * program and erase have their own busy handlers + * status and sequential in needs no delay + */ + switch (command) { + + case NAND_CMD_PAGEPROG: + case NAND_CMD_ERASE1: + case NAND_CMD_ERASE2: + case NAND_CMD_SEQIN: + case NAND_CMD_STATUS: + return; + + case NAND_CMD_RESET: + if (this->dev_ready) + break; + udelay(this->chip_delay); + WriteDOC(NAND_CMD_STATUS, docptr, Mplus_FlashCmd); + WriteDOC(0, docptr, Mplus_WritePipeTerm); + WriteDOC(0, docptr, Mplus_WritePipeTerm); + while ( !(this->read_byte(mtd) & 0x40)); + return; + + /* This applies to read commands */ + default: + /* + * If we don't have access to the busy pin, we apply the given + * command delay + */ + if (!this->dev_ready) { + udelay (this->chip_delay); + return; + } + } + + /* Apply this short delay always to ensure that we do wait tWB in + * any case on any machine. */ + ndelay (100); + /* wait until command is processed */ + while (!this->dev_ready(mtd)); +} + +static int doc200x_dev_ready(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + + if (DoC_is_MillenniumPlus(doc)) { + /* 11.4.2 -- must NOP four times before checking FR/B# */ + DoC_Delay(doc, 4); + if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) { + if(debug) + printk("not ready\n"); + return 0; + } + if (debug)printk("was ready\n"); + return 1; + } else { + /* 11.4.2 -- must NOP four times before checking FR/B# */ + DoC_Delay(doc, 4); + if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) { + if(debug) + printk("not ready\n"); + return 0; + } + /* 11.4.2 -- Must NOP twice if it's ready */ + DoC_Delay(doc, 2); + if (debug)printk("was ready\n"); + return 1; + } +} + +static int doc200x_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) +{ + /* This is our last resort if we couldn't find or create a BBT. Just + pretend all blocks are good. */ + return 0; +} + +static void doc200x_enable_hwecc(struct mtd_info *mtd, int mode) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + + /* Prime the ECC engine */ + switch(mode) { + case NAND_ECC_READ: + WriteDOC(DOC_ECC_RESET, docptr, ECCConf); + WriteDOC(DOC_ECC_EN, docptr, ECCConf); + break; + case NAND_ECC_WRITE: + WriteDOC(DOC_ECC_RESET, docptr, ECCConf); + WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf); + break; + } +} + +static void doc2001plus_enable_hwecc(struct mtd_info *mtd, int mode) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + + /* Prime the ECC engine */ + switch(mode) { + case NAND_ECC_READ: + WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf); + WriteDOC(DOC_ECC_EN, docptr, Mplus_ECCConf); + break; + case NAND_ECC_WRITE: + WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf); + WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, Mplus_ECCConf); + break; + } +} + +/* This code is only called on write */ +static int doc200x_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + unsigned char *ecc_code) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + int i; + int emptymatch = 1; + + /* flush the pipeline */ + if (DoC_is_2000(doc)) { + WriteDOC(doc->CDSNControl & ~CDSN_CTRL_FLASH_IO, docptr, CDSNControl); + WriteDOC(0, docptr, 2k_CDSN_IO); + WriteDOC(0, docptr, 2k_CDSN_IO); + WriteDOC(0, docptr, 2k_CDSN_IO); + WriteDOC(doc->CDSNControl, docptr, CDSNControl); + } else if (DoC_is_MillenniumPlus(doc)) { + WriteDOC(0, docptr, Mplus_NOP); + WriteDOC(0, docptr, Mplus_NOP); + WriteDOC(0, docptr, Mplus_NOP); + } else { + WriteDOC(0, docptr, NOP); + WriteDOC(0, docptr, NOP); + WriteDOC(0, docptr, NOP); + } + + for (i = 0; i < 6; i++) { + if (DoC_is_MillenniumPlus(doc)) + ecc_code[i] = ReadDOC_(docptr, DoC_Mplus_ECCSyndrome0 + i); + else + ecc_code[i] = ReadDOC_(docptr, DoC_ECCSyndrome0 + i); + if (ecc_code[i] != empty_write_ecc[i]) + emptymatch = 0; + } + if (DoC_is_MillenniumPlus(doc)) + WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf); + else + WriteDOC(DOC_ECC_DIS, docptr, ECCConf); +#if 0 + /* If emptymatch=1, we might have an all-0xff data buffer. Check. */ + if (emptymatch) { + /* Note: this somewhat expensive test should not be triggered + often. It could be optimized away by examining the data in + the writebuf routine, and remembering the result. */ + for (i = 0; i < 512; i++) { + if (dat[i] == 0xff) continue; + emptymatch = 0; + break; + } + } + /* If emptymatch still =1, we do have an all-0xff data buffer. + Return all-0xff ecc value instead of the computed one, so + it'll look just like a freshly-erased page. */ + if (emptymatch) memset(ecc_code, 0xff, 6); +#endif + return 0; +} + +static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) +{ + int i, ret = 0; + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + void __iomem *docptr = doc->virtadr; + volatile u_char dummy; + int emptymatch = 1; + + /* flush the pipeline */ + if (DoC_is_2000(doc)) { + dummy = ReadDOC(docptr, 2k_ECCStatus); + dummy = ReadDOC(docptr, 2k_ECCStatus); + dummy = ReadDOC(docptr, 2k_ECCStatus); + } else if (DoC_is_MillenniumPlus(doc)) { + dummy = ReadDOC(docptr, Mplus_ECCConf); + dummy = ReadDOC(docptr, Mplus_ECCConf); + dummy = ReadDOC(docptr, Mplus_ECCConf); + } else { + dummy = ReadDOC(docptr, ECCConf); + dummy = ReadDOC(docptr, ECCConf); + dummy = ReadDOC(docptr, ECCConf); + } + + /* Error occured ? */ + if (dummy & 0x80) { + for (i = 0; i < 6; i++) { + if (DoC_is_MillenniumPlus(doc)) + calc_ecc[i] = ReadDOC_(docptr, DoC_Mplus_ECCSyndrome0 + i); + else + calc_ecc[i] = ReadDOC_(docptr, DoC_ECCSyndrome0 + i); + if (calc_ecc[i] != empty_read_syndrome[i]) + emptymatch = 0; + } + /* If emptymatch=1, the read syndrome is consistent with an + all-0xff data and stored ecc block. Check the stored ecc. */ + if (emptymatch) { + for (i = 0; i < 6; i++) { + if (read_ecc[i] == 0xff) continue; + emptymatch = 0; + break; + } + } + /* If emptymatch still =1, check the data block. */ + if (emptymatch) { + /* Note: this somewhat expensive test should not be triggered + often. It could be optimized away by examining the data in + the readbuf routine, and remembering the result. */ + for (i = 0; i < 512; i++) { + if (dat[i] == 0xff) continue; + emptymatch = 0; + break; + } + } + /* If emptymatch still =1, this is almost certainly a freshly- + erased block, in which case the ECC will not come out right. + We'll suppress the error and tell the caller everything's + OK. Because it is. */ + if (!emptymatch) ret = doc_ecc_decode (rs_decoder, dat, calc_ecc); + if (ret > 0) + printk(KERN_ERR "doc200x_correct_data corrected %d errors\n", ret); + } + if (DoC_is_MillenniumPlus(doc)) + WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf); + else + WriteDOC(DOC_ECC_DIS, docptr, ECCConf); + if (no_ecc_failures && (ret == -1)) { + printk(KERN_ERR "suppressing ECC failure\n"); + ret = 0; + } + return ret; +} + +/*u_char mydatabuf[528]; */ + +static struct nand_oobinfo doc200x_oobinfo = { + .useecc = MTD_NANDECC_AUTOPLACE, + .eccbytes = 6, + .eccpos = {0, 1, 2, 3, 4, 5}, + .oobfree = { {8, 8} } +}; + +/* Find the (I)NFTL Media Header, and optionally also the mirror media header. + On sucessful return, buf will contain a copy of the media header for + further processing. id is the string to scan for, and will presumably be + either "ANAND" or "BNAND". If findmirror=1, also look for the mirror media + header. The page #s of the found media headers are placed in mh0_page and + mh1_page in the DOC private structure. */ +static int __init find_media_headers(struct mtd_info *mtd, u_char *buf, + const char *id, int findmirror) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + unsigned offs, end = (MAX_MEDIAHEADER_SCAN << this->phys_erase_shift); + int ret; + size_t retlen; + + end = min(end, mtd->size); /* paranoia */ + for (offs = 0; offs < end; offs += mtd->erasesize) { + ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf); + if (retlen != mtd->oobblock) continue; + if (ret) { + printk(KERN_WARNING "ECC error scanning DOC at 0x%x\n", + offs); + } + if (memcmp(buf, id, 6)) continue; + printk(KERN_INFO "Found DiskOnChip %s Media Header at 0x%x\n", id, offs); + if (doc->mh0_page == -1) { + doc->mh0_page = offs >> this->page_shift; + if (!findmirror) return 1; + continue; + } + doc->mh1_page = offs >> this->page_shift; + return 2; + } + if (doc->mh0_page == -1) { + printk(KERN_WARNING "DiskOnChip %s Media Header not found.\n", id); + return 0; + } + /* Only one mediaheader was found. We want buf to contain a + mediaheader on return, so we'll have to re-read the one we found. */ + offs = doc->mh0_page << this->page_shift; + ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf); + if (retlen != mtd->oobblock) { + /* Insanity. Give up. */ + printk(KERN_ERR "Read DiskOnChip Media Header once, but can't reread it???\n"); + return 0; + } + return 1; +} + +static inline int __init nftl_partscan(struct mtd_info *mtd, + struct mtd_partition *parts) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + int ret = 0; + u_char *buf; + struct NFTLMediaHeader *mh; + const unsigned psize = 1 << this->page_shift; + unsigned blocks, maxblocks; + int offs, numheaders; + + buf = kmalloc(mtd->oobblock, GFP_KERNEL); + if (!buf) { + printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n"); + return 0; + } + if (!(numheaders=find_media_headers(mtd, buf, "ANAND", 1))) goto out; + mh = (struct NFTLMediaHeader *) buf; + +/*#ifdef CONFIG_MTD_DEBUG_VERBOSE */ +/* if (CONFIG_MTD_DEBUG_VERBOSE >= 2) */ + printk(KERN_INFO " DataOrgID = %s\n" + " NumEraseUnits = %d\n" + " FirstPhysicalEUN = %d\n" + " FormattedSize = %d\n" + " UnitSizeFactor = %d\n", + mh->DataOrgID, mh->NumEraseUnits, + mh->FirstPhysicalEUN, mh->FormattedSize, + mh->UnitSizeFactor); +/*#endif */ + + blocks = mtd->size >> this->phys_erase_shift; + maxblocks = min(32768U, mtd->erasesize - psize); + + if (mh->UnitSizeFactor == 0x00) { + /* Auto-determine UnitSizeFactor. The constraints are: + - There can be at most 32768 virtual blocks. + - There can be at most (virtual block size - page size) + virtual blocks (because MediaHeader+BBT must fit in 1). + */ + mh->UnitSizeFactor = 0xff; + while (blocks > maxblocks) { + blocks >>= 1; + maxblocks = min(32768U, (maxblocks << 1) + psize); + mh->UnitSizeFactor--; + } + printk(KERN_WARNING "UnitSizeFactor=0x00 detected. Correct value is assumed to be 0x%02x.\n", mh->UnitSizeFactor); + } + + /* NOTE: The lines below modify internal variables of the NAND and MTD + layers; variables with have already been configured by nand_scan. + Unfortunately, we didn't know before this point what these values + should be. Thus, this code is somewhat dependant on the exact + implementation of the NAND layer. */ + if (mh->UnitSizeFactor != 0xff) { + this->bbt_erase_shift += (0xff - mh->UnitSizeFactor); + mtd->erasesize <<= (0xff - mh->UnitSizeFactor); + printk(KERN_INFO "Setting virtual erase size to %d\n", mtd->erasesize); + blocks = mtd->size >> this->bbt_erase_shift; + maxblocks = min(32768U, mtd->erasesize - psize); + } + + if (blocks > maxblocks) { + printk(KERN_ERR "UnitSizeFactor of 0x%02x is inconsistent with device size. Aborting.\n", mh->UnitSizeFactor); + goto out; + } + + /* Skip past the media headers. */ + offs = max(doc->mh0_page, doc->mh1_page); + offs <<= this->page_shift; + offs += mtd->erasesize; + + /*parts[0].name = " DiskOnChip Boot / Media Header partition"; */ + /*parts[0].offset = 0; */ + /*parts[0].size = offs; */ + + parts[0].name = " DiskOnChip BDTL partition"; + parts[0].offset = offs; + parts[0].size = (mh->NumEraseUnits - numheaders) << this->bbt_erase_shift; + + offs += parts[0].size; + if (offs < mtd->size) { + parts[1].name = " DiskOnChip Remainder partition"; + parts[1].offset = offs; + parts[1].size = mtd->size - offs; + ret = 2; + goto out; + } + ret = 1; +out: + kfree(buf); + return ret; +} + +/* This is a stripped-down copy of the code in inftlmount.c */ +static inline int __init inftl_partscan(struct mtd_info *mtd, + struct mtd_partition *parts) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + int ret = 0; + u_char *buf; + struct INFTLMediaHeader *mh; + struct INFTLPartition *ip; + int numparts = 0; + int blocks; + int vshift, lastvunit = 0; + int i; + int end = mtd->size; + + if (inftl_bbt_write) + end -= (INFTL_BBT_RESERVED_BLOCKS << this->phys_erase_shift); + + buf = kmalloc(mtd->oobblock, GFP_KERNEL); + if (!buf) { + printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n"); + return 0; + } + + if (!find_media_headers(mtd, buf, "BNAND", 0)) goto out; + doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift); + mh = (struct INFTLMediaHeader *) buf; + + mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks); + mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions); + mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions); + mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits); + mh->FormatFlags = le32_to_cpu(mh->FormatFlags); + mh->PercentUsed = le32_to_cpu(mh->PercentUsed); + +/*#ifdef CONFIG_MTD_DEBUG_VERBOSE */ +/* if (CONFIG_MTD_DEBUG_VERBOSE >= 2) */ + printk(KERN_INFO " bootRecordID = %s\n" + " NoOfBootImageBlocks = %d\n" + " NoOfBinaryPartitions = %d\n" + " NoOfBDTLPartitions = %d\n" + " BlockMultiplerBits = %d\n" + " FormatFlgs = %d\n" + " OsakVersion = %d.%d.%d.%d\n" + " PercentUsed = %d\n", + mh->bootRecordID, mh->NoOfBootImageBlocks, + mh->NoOfBinaryPartitions, + mh->NoOfBDTLPartitions, + mh->BlockMultiplierBits, mh->FormatFlags, + ((unsigned char *) &mh->OsakVersion)[0] & 0xf, + ((unsigned char *) &mh->OsakVersion)[1] & 0xf, + ((unsigned char *) &mh->OsakVersion)[2] & 0xf, + ((unsigned char *) &mh->OsakVersion)[3] & 0xf, + mh->PercentUsed); +/*#endif */ + + vshift = this->phys_erase_shift + mh->BlockMultiplierBits; + + blocks = mtd->size >> vshift; + if (blocks > 32768) { + printk(KERN_ERR "BlockMultiplierBits=%d is inconsistent with device size. Aborting.\n", mh->BlockMultiplierBits); + goto out; + } + + blocks = doc->chips_per_floor << (this->chip_shift - this->phys_erase_shift); + if (inftl_bbt_write && (blocks > mtd->erasesize)) { + printk(KERN_ERR "Writeable BBTs spanning more than one erase block are not yet supported. FIX ME!\n"); + goto out; + } + + /* Scan the partitions */ + for (i = 0; (i < 4); i++) { + ip = &(mh->Partitions[i]); + ip->virtualUnits = le32_to_cpu(ip->virtualUnits); + ip->firstUnit = le32_to_cpu(ip->firstUnit); + ip->lastUnit = le32_to_cpu(ip->lastUnit); + ip->flags = le32_to_cpu(ip->flags); + ip->spareUnits = le32_to_cpu(ip->spareUnits); + ip->Reserved0 = le32_to_cpu(ip->Reserved0); + +/*#ifdef CONFIG_MTD_DEBUG_VERBOSE */ +/* if (CONFIG_MTD_DEBUG_VERBOSE >= 2) */ + printk(KERN_INFO " PARTITION[%d] ->\n" + " virtualUnits = %d\n" + " firstUnit = %d\n" + " lastUnit = %d\n" + " flags = 0x%x\n" + " spareUnits = %d\n", + i, ip->virtualUnits, ip->firstUnit, + ip->lastUnit, ip->flags, + ip->spareUnits); +/*#endif */ + +/* + if ((i == 0) && (ip->firstUnit > 0)) { + parts[0].name = " DiskOnChip IPL / Media Header partition"; + parts[0].offset = 0; + parts[0].size = mtd->erasesize * ip->firstUnit; + numparts = 1; + } +*/ + + if (ip->flags & INFTL_BINARY) + parts[numparts].name = " DiskOnChip BDK partition"; + else + parts[numparts].name = " DiskOnChip BDTL partition"; + parts[numparts].offset = ip->firstUnit << vshift; + parts[numparts].size = (1 + ip->lastUnit - ip->firstUnit) << vshift; + numparts++; + if (ip->lastUnit > lastvunit) lastvunit = ip->lastUnit; + if (ip->flags & INFTL_LAST) break; + } + lastvunit++; + if ((lastvunit << vshift) < end) { + parts[numparts].name = " DiskOnChip Remainder partition"; + parts[numparts].offset = lastvunit << vshift; + parts[numparts].size = end - parts[numparts].offset; + numparts++; + } + ret = numparts; +out: + kfree(buf); + return ret; +} + +static int __init nftl_scan_bbt(struct mtd_info *mtd) +{ + int ret, numparts; + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + struct mtd_partition parts[2]; + + memset((char *) parts, 0, sizeof(parts)); + /* On NFTL, we have to find the media headers before we can read the + BBTs, since they're stored in the media header eraseblocks. */ + numparts = nftl_partscan(mtd, parts); + if (!numparts) return -EIO; + this->bbt_td->options = NAND_BBT_ABSPAGE | NAND_BBT_8BIT | + NAND_BBT_SAVECONTENT | NAND_BBT_WRITE | + NAND_BBT_VERSION; + this->bbt_td->veroffs = 7; + this->bbt_td->pages[0] = doc->mh0_page + 1; + if (doc->mh1_page != -1) { + this->bbt_md->options = NAND_BBT_ABSPAGE | NAND_BBT_8BIT | + NAND_BBT_SAVECONTENT | NAND_BBT_WRITE | + NAND_BBT_VERSION; + this->bbt_md->veroffs = 7; + this->bbt_md->pages[0] = doc->mh1_page + 1; + } else { + this->bbt_md = NULL; + } + + /* It's safe to set bd=NULL below because NAND_BBT_CREATE is not set. + At least as nand_bbt.c is currently written. */ + if ((ret = nand_scan_bbt(mtd, NULL))) + return ret; + add_mtd_device(mtd); +#ifdef CONFIG_MTD_PARTITIONS + if (!no_autopart) + add_mtd_partitions(mtd, parts, numparts); +#endif + return 0; +} + +static int __init inftl_scan_bbt(struct mtd_info *mtd) +{ + int ret, numparts; + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + struct mtd_partition parts[5]; + + if (this->numchips > doc->chips_per_floor) { + printk(KERN_ERR "Multi-floor INFTL devices not yet supported.\n"); + return -EIO; + } + + if (DoC_is_MillenniumPlus(doc)) { + this->bbt_td->options = NAND_BBT_2BIT | NAND_BBT_ABSPAGE; + if (inftl_bbt_write) + this->bbt_td->options |= NAND_BBT_WRITE; + this->bbt_td->pages[0] = 2; + this->bbt_md = NULL; + } else { + this->bbt_td->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT | + NAND_BBT_VERSION; + if (inftl_bbt_write) + this->bbt_td->options |= NAND_BBT_WRITE; + this->bbt_td->offs = 8; + this->bbt_td->len = 8; + this->bbt_td->veroffs = 7; + this->bbt_td->maxblocks = INFTL_BBT_RESERVED_BLOCKS; + this->bbt_td->reserved_block_code = 0x01; + this->bbt_td->pattern = "MSYS_BBT"; + + this->bbt_md->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT | + NAND_BBT_VERSION; + if (inftl_bbt_write) + this->bbt_md->options |= NAND_BBT_WRITE; + this->bbt_md->offs = 8; + this->bbt_md->len = 8; + this->bbt_md->veroffs = 7; + this->bbt_md->maxblocks = INFTL_BBT_RESERVED_BLOCKS; + this->bbt_md->reserved_block_code = 0x01; + this->bbt_md->pattern = "TBB_SYSM"; + } + + /* It's safe to set bd=NULL below because NAND_BBT_CREATE is not set. + At least as nand_bbt.c is currently written. */ + if ((ret = nand_scan_bbt(mtd, NULL))) + return ret; + memset((char *) parts, 0, sizeof(parts)); + numparts = inftl_partscan(mtd, parts); + /* At least for now, require the INFTL Media Header. We could probably + do without it for non-INFTL use, since all it gives us is + autopartitioning, but I want to give it more thought. */ + if (!numparts) return -EIO; + add_mtd_device(mtd); +#ifdef CONFIG_MTD_PARTITIONS + if (!no_autopart) + add_mtd_partitions(mtd, parts, numparts); +#endif + return 0; +} + +static inline int __init doc2000_init(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + + this->write_byte = doc2000_write_byte; + this->read_byte = doc2000_read_byte; + this->write_buf = doc2000_writebuf; + this->read_buf = doc2000_readbuf; + this->verify_buf = doc2000_verifybuf; + this->scan_bbt = nftl_scan_bbt; + + doc->CDSNControl = CDSN_CTRL_FLASH_IO | CDSN_CTRL_ECC_IO; + doc2000_count_chips(mtd); + mtd->name = "DiskOnChip 2000 (NFTL Model)"; + return (4 * doc->chips_per_floor); +} + +static inline int __init doc2001_init(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + + this->write_byte = doc2001_write_byte; + this->read_byte = doc2001_read_byte; + this->write_buf = doc2001_writebuf; + this->read_buf = doc2001_readbuf; + this->verify_buf = doc2001_verifybuf; + + ReadDOC(doc->virtadr, ChipID); + ReadDOC(doc->virtadr, ChipID); + ReadDOC(doc->virtadr, ChipID); + if (ReadDOC(doc->virtadr, ChipID) != DOC_ChipID_DocMil) { + /* It's not a Millennium; it's one of the newer + DiskOnChip 2000 units with a similar ASIC. + Treat it like a Millennium, except that it + can have multiple chips. */ + doc2000_count_chips(mtd); + mtd->name = "DiskOnChip 2000 (INFTL Model)"; + this->scan_bbt = inftl_scan_bbt; + return (4 * doc->chips_per_floor); + } else { + /* Bog-standard Millennium */ + doc->chips_per_floor = 1; + mtd->name = "DiskOnChip Millennium"; + this->scan_bbt = nftl_scan_bbt; + return 1; + } +} + +static inline int __init doc2001plus_init(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + struct doc_priv *doc = this->priv; + + this->write_byte = NULL; + this->read_byte = doc2001plus_read_byte; + this->write_buf = doc2001plus_writebuf; + this->read_buf = doc2001plus_readbuf; + this->verify_buf = doc2001plus_verifybuf; + this->scan_bbt = inftl_scan_bbt; + this->hwcontrol = NULL; + this->select_chip = doc2001plus_select_chip; + this->cmdfunc = doc2001plus_command; + this->enable_hwecc = doc2001plus_enable_hwecc; + + doc->chips_per_floor = 1; + mtd->name = "DiskOnChip Millennium Plus"; + + return 1; +} + +static inline int __init doc_probe(unsigned long physadr) +{ + unsigned char ChipID; + struct mtd_info *mtd; + struct nand_chip *nand; + struct doc_priv *doc; + void __iomem *virtadr; + unsigned char save_control; + unsigned char tmp, tmpb, tmpc; + int reg, len, numchips; + int ret = 0; + + virtadr = ioremap(physadr, DOC_IOREMAP_LEN); + if (!virtadr) { + printk(KERN_ERR "Diskonchip ioremap failed: 0x%x bytes at 0x%lx\n", DOC_IOREMAP_LEN, physadr); + return -EIO; + } + + /* It's not possible to cleanly detect the DiskOnChip - the + * bootup procedure will put the device into reset mode, and + * it's not possible to talk to it without actually writing + * to the DOCControl register. So we store the current contents + * of the DOCControl register's location, in case we later decide + * that it's not a DiskOnChip, and want to put it back how we + * found it. + */ + save_control = ReadDOC(virtadr, DOCControl); + + /* Reset the DiskOnChip ASIC */ + WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, + virtadr, DOCControl); + WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, + virtadr, DOCControl); + + /* Enable the DiskOnChip ASIC */ + WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, + virtadr, DOCControl); + WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, + virtadr, DOCControl); + + ChipID = ReadDOC(virtadr, ChipID); + + switch(ChipID) { + case DOC_ChipID_Doc2k: + reg = DoC_2k_ECCStatus; + break; + case DOC_ChipID_DocMil: + reg = DoC_ECCConf; + break; + case DOC_ChipID_DocMilPlus16: + case DOC_ChipID_DocMilPlus32: + case 0: + /* Possible Millennium Plus, need to do more checks */ + /* Possibly release from power down mode */ + for (tmp = 0; (tmp < 4); tmp++) + ReadDOC(virtadr, Mplus_Power); + + /* Reset the Millennium Plus ASIC */ + tmp = DOC_MODE_RESET | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | + DOC_MODE_BDECT; + WriteDOC(tmp, virtadr, Mplus_DOCControl); + WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm); + + mdelay(1); + /* Enable the Millennium Plus ASIC */ + tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | + DOC_MODE_BDECT; + WriteDOC(tmp, virtadr, Mplus_DOCControl); + WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm); + mdelay(1); + + ChipID = ReadDOC(virtadr, ChipID); + + switch (ChipID) { + case DOC_ChipID_DocMilPlus16: + reg = DoC_Mplus_Toggle; + break; + case DOC_ChipID_DocMilPlus32: + printk(KERN_ERR "DiskOnChip Millennium Plus 32MB is not supported, ignoring.\n"); + default: + ret = -ENODEV; + goto notfound; + } + break; + + default: + ret = -ENODEV; + goto notfound; + } + /* Check the TOGGLE bit in the ECC register */ + tmp = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT; + tmpb = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT; + tmpc = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT; + if ((tmp == tmpb) || (tmp != tmpc)) { + printk(KERN_WARNING "Possible DiskOnChip at 0x%lx failed TOGGLE test, dropping.\n", physadr); + ret = -ENODEV; + goto notfound; + } + + for (mtd = doclist; mtd; mtd = doc->nextdoc) { + unsigned char oldval; + unsigned char newval; + nand = mtd->priv; + doc = nand->priv; + /* Use the alias resolution register to determine if this is + in fact the same DOC aliased to a new address. If writes + to one chip's alias resolution register change the value on + the other chip, they're the same chip. */ + if (ChipID == DOC_ChipID_DocMilPlus16) { + oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution); + newval = ReadDOC(virtadr, Mplus_AliasResolution); + } else { + oldval = ReadDOC(doc->virtadr, AliasResolution); + newval = ReadDOC(virtadr, AliasResolution); + } + if (oldval != newval) + continue; + if (ChipID == DOC_ChipID_DocMilPlus16) { + WriteDOC(~newval, virtadr, Mplus_AliasResolution); + oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution); + WriteDOC(newval, virtadr, Mplus_AliasResolution); /* restore it */ + } else { + WriteDOC(~newval, virtadr, AliasResolution); + oldval = ReadDOC(doc->virtadr, AliasResolution); + WriteDOC(newval, virtadr, AliasResolution); /* restore it */ + } + newval = ~newval; + if (oldval == newval) { + printk(KERN_DEBUG "Found alias of DOC at 0x%lx to 0x%lx\n", doc->physadr, physadr); + goto notfound; + } + } + + printk(KERN_NOTICE "DiskOnChip found at 0x%lx\n", physadr); + + len = sizeof(struct mtd_info) + + sizeof(struct nand_chip) + + sizeof(struct doc_priv) + + (2 * sizeof(struct nand_bbt_descr)); + mtd = kmalloc(len, GFP_KERNEL); + if (!mtd) { + printk(KERN_ERR "DiskOnChip kmalloc (%d bytes) failed!\n", len); + ret = -ENOMEM; + goto fail; + } + memset(mtd, 0, len); + + nand = (struct nand_chip *) (mtd + 1); + doc = (struct doc_priv *) (nand + 1); + nand->bbt_td = (struct nand_bbt_descr *) (doc + 1); + nand->bbt_md = nand->bbt_td + 1; + + mtd->priv = nand; + mtd->owner = THIS_MODULE; + + nand->priv = doc; + nand->select_chip = doc200x_select_chip; + nand->hwcontrol = doc200x_hwcontrol; + nand->dev_ready = doc200x_dev_ready; + nand->waitfunc = doc200x_wait; + nand->block_bad = doc200x_block_bad; + nand->enable_hwecc = doc200x_enable_hwecc; + nand->calculate_ecc = doc200x_calculate_ecc; + nand->correct_data = doc200x_correct_data; + + nand->autooob = &doc200x_oobinfo; + nand->eccmode = NAND_ECC_HW6_512; + nand->options = NAND_USE_FLASH_BBT | NAND_HWECC_SYNDROME; + + doc->physadr = physadr; + doc->virtadr = virtadr; + doc->ChipID = ChipID; + doc->curfloor = -1; + doc->curchip = -1; + doc->mh0_page = -1; + doc->mh1_page = -1; + doc->nextdoc = doclist; + + if (ChipID == DOC_ChipID_Doc2k) + numchips = doc2000_init(mtd); + else if (ChipID == DOC_ChipID_DocMilPlus16) + numchips = doc2001plus_init(mtd); + else + numchips = doc2001_init(mtd); + + if ((ret = nand_scan(mtd, numchips))) { + /* DBB note: i believe nand_release is necessary here, as + buffers may have been allocated in nand_base. Check with + Thomas. FIX ME! */ + /* nand_release will call del_mtd_device, but we haven't yet + added it. This is handled without incident by + del_mtd_device, as far as I can tell. */ + nand_release(mtd); + kfree(mtd); + goto fail; + } + + /* Success! */ + doclist = mtd; + return 0; + +notfound: + /* Put back the contents of the DOCControl register, in case it's not + actually a DiskOnChip. */ + WriteDOC(save_control, virtadr, DOCControl); +fail: + iounmap(virtadr); + return ret; +} + +static void release_nanddoc(void) +{ + struct mtd_info *mtd, *nextmtd; + struct nand_chip *nand; + struct doc_priv *doc; + + for (mtd = doclist; mtd; mtd = nextmtd) { + nand = mtd->priv; + doc = nand->priv; + + nextmtd = doc->nextdoc; + nand_release(mtd); + iounmap(doc->virtadr); + kfree(mtd); + } +} + +static int __init init_nanddoc(void) +{ + int i, ret = 0; + + /* We could create the decoder on demand, if memory is a concern. + * This way we have it handy, if an error happens + * + * Symbolsize is 10 (bits) + * Primitve polynomial is x^10+x^3+1 + * first consecutive root is 510 + * primitve element to generate roots = 1 + * generator polinomial degree = 4 + */ + rs_decoder = init_rs(10, 0x409, FCR, 1, NROOTS); + if (!rs_decoder) { + printk (KERN_ERR "DiskOnChip: Could not create a RS decoder\n"); + return -ENOMEM; + } + + if (doc_config_location) { + printk(KERN_INFO "Using configured DiskOnChip probe address 0x%lx\n", doc_config_location); + ret = doc_probe(doc_config_location); + if (ret < 0) + goto outerr; + } else { + for (i=0; (doc_locations[i] != 0xffffffff); i++) { + doc_probe(doc_locations[i]); + } + } + /* No banner message any more. Print a message if no DiskOnChip + found, so the user knows we at least tried. */ + if (!doclist) { + printk(KERN_INFO "No valid DiskOnChip devices found\n"); + ret = -ENODEV; + goto outerr; + } + return 0; +outerr: + free_rs(rs_decoder); + return ret; +} + +static void __exit cleanup_nanddoc(void) +{ + /* Cleanup the nand/DoC resources */ + release_nanddoc(); + + /* Free the reed solomon resources */ + if (rs_decoder) { + free_rs(rs_decoder); + } +} + +module_init(init_nanddoc); +module_exit(cleanup_nanddoc); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse "); +MODULE_DESCRIPTION("M-Systems DiskOnChip 2000, Millennium and Millennium Plus device driver\n"); +#endif diff --git a/drivers/nand/nand.c b/drivers/nand/nand.c new file mode 100644 index 000000000..73f68b2f4 --- /dev/null +++ b/drivers/nand/nand.c @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2005 + * 2N Telekomunikace, a.s. + * Ladislav Michl + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#ifndef CFG_NAND_BASE_LIST +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#endif + +int nand_curr_device = -1; +nand_info_t nand_info[CFG_MAX_NAND_DEVICE]; + +static struct nand_chip nand_chip[CFG_MAX_NAND_DEVICE]; +static ulong base_address[CFG_MAX_NAND_DEVICE] = CFG_NAND_BASE_LIST; + +static const char default_nand_name[] = "nand"; + +extern int board_nand_init(struct nand_chip *nand); + +static void nand_init_chip(struct mtd_info *mtd, struct nand_chip *nand, + ulong base_addr) +{ + mtd->priv = nand; + + nand->IO_ADDR_R = nand->IO_ADDR_W = (void __iomem *)base_addr; + if (board_nand_init(nand) == 0) { + if (nand_scan(mtd, 1) == 0) { + if (!mtd->name) + mtd->name = (char *)default_nand_name; + } else + mtd->name = NULL; + } else { + mtd->name = NULL; + mtd->size = 0; + } + +} + +void nand_init(void) +{ + int i; + unsigned int size = 0; + for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) { + nand_init_chip(&nand_info[i], &nand_chip[i], base_address[i]); + size += nand_info[i].size; + if (nand_curr_device == -1) + nand_curr_device = i; + } + printf("%lu MiB\n", size / (1024 * 1024)); + +#ifdef CFG_NAND_SELECT_DEVICE + /* + * Select the chip in the board/cpu specific driver + */ + board_nand_select_device(nand_info[nand_curr_device].priv, nand_curr_device); +#endif +} + diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c new file mode 100644 index 000000000..faf3bf014 --- /dev/null +++ b/drivers/nand/nand_base.c @@ -0,0 +1,2665 @@ +/* + * drivers/mtd/nand.c + * + * Overview: + * This is the generic MTD driver for NAND flash devices. It should be + * capable of working with almost all NAND chips currently available. + * Basic support for AG-AND chips is provided. + * + * Additional technical information is available on + * http://www.linux-mtd.infradead.org/tech/nand.html + * + * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) + * 2002 Thomas Gleixner (tglx@linutronix.de) + * + * 02-08-2004 tglx: support for strange chips, which cannot auto increment + * pages on read / read_oob + * + * 03-17-2004 tglx: Check ready before auto increment check. Simon Bayes + * pointed this out, as he marked an auto increment capable chip + * as NOAUTOINCR in the board driver. + * Make reads over block boundaries work too + * + * 04-14-2004 tglx: first working version for 2k page size chips + * + * 05-19-2004 tglx: Basic support for Renesas AG-AND chips + * + * 09-24-2004 tglx: add support for hardware controllers (e.g. ECC) shared + * among multiple independend devices. Suggestions and initial patch + * from Ben Dooks + * + * Credits: + * David Woodhouse for adding multichip support + * + * Aleph One Ltd. and Toby Churchill Ltd. for supporting the + * rework for 2K page size chips + * + * TODO: + * Enable cached programming for 2k page size chips + * Check, if mtd->ecctype should be set to MTD_ECC_HW + * if we have HW ecc support. + * The AG-AND chips have nice features for speed improvement, + * which are not supported yet. Read / program 4 pages in one go. + * + * $Id: nand_base.c,v 1.126 2004/12/13 11:22:25 lavinen Exp $ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/* XXX U-BOOT XXX */ +#if 0 +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MTD_PARTITIONS +#include +#endif + +#endif + +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +#ifdef CONFIG_JFFS2_NAND +#include +#endif + +/* Define default oob placement schemes for large and small page devices */ +static struct nand_oobinfo nand_oob_8 = { + .useecc = MTD_NANDECC_AUTOPLACE, + .eccbytes = 3, + .eccpos = {0, 1, 2}, + .oobfree = { {3, 2}, {6, 2} } +}; + +static struct nand_oobinfo nand_oob_16 = { + .useecc = MTD_NANDECC_AUTOPLACE, + .eccbytes = 6, + .eccpos = {0, 1, 2, 3, 6, 7}, + .oobfree = { {8, 8} } +}; + +static struct nand_oobinfo nand_oob_64 = { + .useecc = MTD_NANDECC_AUTOPLACE, + .eccbytes = 24, + .eccpos = { + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63}, + .oobfree = { {2, 38} } +}; + +/* This is used for padding purposes in nand_write_oob */ +static u_char ffchars[] = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, +}; + +/* + * NAND low-level MTD interface functions + */ +static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len); +static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len); +static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len); + +static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf); +static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel); +static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf); +static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf); +static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, + size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel); +static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf); +/* XXX U-BOOT XXX */ +#if 0 +static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t * retlen); +static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel); +#endif +static int nand_erase (struct mtd_info *mtd, struct erase_info *instr); +static void nand_sync (struct mtd_info *mtd); + +/* Some internal functions */ +static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, + struct nand_oobinfo *oobsel, int mode); +#ifdef CONFIG_MTD_NAND_VERIFY_WRITE +static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages, + u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode); +#else +#define nand_verify_pages(...) (0) +#endif + +static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state); + +/** + * nand_release_device - [GENERIC] release chip + * @mtd: MTD device structure + * + * Deselect, release chip lock and wake up anyone waiting on the device + */ +/* XXX U-BOOT XXX */ +#if 0 +static void nand_release_device (struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + + /* De-select the NAND device */ + this->select_chip(mtd, -1); + /* Do we have a hardware controller ? */ + if (this->controller) { + spin_lock(&this->controller->lock); + this->controller->active = NULL; + spin_unlock(&this->controller->lock); + } + /* Release the chip */ + spin_lock (&this->chip_lock); + this->state = FL_READY; + wake_up (&this->wq); + spin_unlock (&this->chip_lock); +} +#else +static void nand_release_device (struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + this->select_chip(mtd, -1); /* De-select the NAND device */ +} +#endif + +/** + * nand_read_byte - [DEFAULT] read one byte from the chip + * @mtd: MTD device structure + * + * Default read function for 8bit buswith + */ +static u_char nand_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + return readb(this->IO_ADDR_R); +} + +/** + * nand_write_byte - [DEFAULT] write one byte to the chip + * @mtd: MTD device structure + * @byte: pointer to data byte to write + * + * Default write function for 8it buswith + */ +static void nand_write_byte(struct mtd_info *mtd, u_char byte) +{ + struct nand_chip *this = mtd->priv; + writeb(byte, this->IO_ADDR_W); +} + +/** + * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip + * @mtd: MTD device structure + * + * Default read function for 16bit buswith with + * endianess conversion + */ +static u_char nand_read_byte16(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + return (u_char) cpu_to_le16(readw(this->IO_ADDR_R)); +} + +/** + * nand_write_byte16 - [DEFAULT] write one byte endianess aware to the chip + * @mtd: MTD device structure + * @byte: pointer to data byte to write + * + * Default write function for 16bit buswith with + * endianess conversion + */ +static void nand_write_byte16(struct mtd_info *mtd, u_char byte) +{ + struct nand_chip *this = mtd->priv; + writew(le16_to_cpu((u16) byte), this->IO_ADDR_W); +} + +/** + * nand_read_word - [DEFAULT] read one word from the chip + * @mtd: MTD device structure + * + * Default read function for 16bit buswith without + * endianess conversion + */ +static u16 nand_read_word(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + return readw(this->IO_ADDR_R); +} + +/** + * nand_write_word - [DEFAULT] write one word to the chip + * @mtd: MTD device structure + * @word: data word to write + * + * Default write function for 16bit buswith without + * endianess conversion + */ +static void nand_write_word(struct mtd_info *mtd, u16 word) +{ + struct nand_chip *this = mtd->priv; + writew(word, this->IO_ADDR_W); +} + +/** + * nand_select_chip - [DEFAULT] control CE line + * @mtd: MTD device structure + * @chip: chipnumber to select, -1 for deselect + * + * Default select function for 1 chip devices. + */ +static void nand_select_chip(struct mtd_info *mtd, int chip) +{ + struct nand_chip *this = mtd->priv; + switch(chip) { + case -1: + this->hwcontrol(mtd, NAND_CTL_CLRNCE); + break; + case 0: + this->hwcontrol(mtd, NAND_CTL_SETNCE); + break; + + default: + BUG(); + } +} + +/** + * nand_write_buf - [DEFAULT] write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + * + * Default write function for 8bit buswith + */ +static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + + for (i=0; iIO_ADDR_W); +} + +/** + * nand_read_buf - [DEFAULT] read chip data into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + * + * Default read function for 8bit buswith + */ +static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + + for (i=0; iIO_ADDR_R); +} + +/** + * nand_verify_buf - [DEFAULT] Verify chip data against buffer + * @mtd: MTD device structure + * @buf: buffer containing the data to compare + * @len: number of bytes to compare + * + * Default verify function for 8bit buswith + */ +static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + + for (i=0; iIO_ADDR_R)) + return -EFAULT; + + return 0; +} + +/** + * nand_write_buf16 - [DEFAULT] write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + * + * Default write function for 16bit buswith + */ +static void nand_write_buf16(struct mtd_info *mtd, const u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + u16 *p = (u16 *) buf; + len >>= 1; + + for (i=0; iIO_ADDR_W); + +} + +/** + * nand_read_buf16 - [DEFAULT] read chip data into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + * + * Default read function for 16bit buswith + */ +static void nand_read_buf16(struct mtd_info *mtd, u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + u16 *p = (u16 *) buf; + len >>= 1; + + for (i=0; iIO_ADDR_R); +} + +/** + * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer + * @mtd: MTD device structure + * @buf: buffer containing the data to compare + * @len: number of bytes to compare + * + * Default verify function for 16bit buswith + */ +static int nand_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + u16 *p = (u16 *) buf; + len >>= 1; + + for (i=0; iIO_ADDR_R)) + return -EFAULT; + + return 0; +} + +/** + * nand_block_bad - [DEFAULT] Read bad block marker from the chip + * @mtd: MTD device structure + * @ofs: offset from device start + * @getchip: 0, if the chip is already selected + * + * Check, if the block is bad. + */ +static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) +{ + int page, chipnr, res = 0; + struct nand_chip *this = mtd->priv; + u16 bad; + + if (getchip) { + page = (int)(ofs >> this->page_shift); + chipnr = (int)(ofs >> this->chip_shift); + + /* Grab the lock and see if the device is available */ + nand_get_device (this, mtd, FL_READING); + + /* Select the NAND device */ + this->select_chip(mtd, chipnr); + } else + page = (int) ofs; + + if (this->options & NAND_BUSWIDTH_16) { + this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page & this->pagemask); + bad = cpu_to_le16(this->read_word(mtd)); + if (this->badblockpos & 0x1) + bad >>= 1; + if ((bad & 0xFF) != 0xff) + res = 1; + } else { + this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos, page & this->pagemask); + if (this->read_byte(mtd) != 0xff) + res = 1; + } + + if (getchip) { + /* Deselect and wake up anyone waiting on the device */ + nand_release_device(mtd); + } + + return res; +} + +/** + * nand_default_block_markbad - [DEFAULT] mark a block bad + * @mtd: MTD device structure + * @ofs: offset from device start + * + * This is the default implementation, which can be overridden by + * a hardware specific driver. +*/ +static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) +{ + struct nand_chip *this = mtd->priv; + u_char buf[2] = {0, 0}; + size_t retlen; + int block; + + /* Get block number */ + block = ((int) ofs) >> this->bbt_erase_shift; + this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); + + /* Do we have a flash based bad block table ? */ + if (this->options & NAND_USE_FLASH_BBT) + return nand_update_bbt (mtd, ofs); + + /* We write two bytes, so we dont have to mess with 16 bit access */ + ofs += mtd->oobsize + (this->badblockpos & ~0x01); + return nand_write_oob (mtd, ofs , 2, &retlen, buf); +} + +/** + * nand_check_wp - [GENERIC] check if the chip is write protected + * @mtd: MTD device structure + * Check, if the device is write protected + * + * The function expects, that the device is already selected + */ +static int nand_check_wp (struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + /* Check the WP bit */ + this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1); + return (this->read_byte(mtd) & 0x80) ? 0 : 1; +} + +/** + * nand_block_checkbad - [GENERIC] Check if a block is marked bad + * @mtd: MTD device structure + * @ofs: offset from device start + * @getchip: 0, if the chip is already selected + * @allowbbt: 1, if its allowed to access the bbt area + * + * Check, if the block is bad. Either by reading the bad block table or + * calling of the scan function. + */ +static int nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt) +{ + struct nand_chip *this = mtd->priv; + + if (!this->bbt) + return this->block_bad(mtd, ofs, getchip); + + /* Return info from the table */ + return nand_isbad_bbt (mtd, ofs, allowbbt); +} + +/** + * nand_command - [DEFAULT] Send command to NAND device + * @mtd: MTD device structure + * @command: the command to be sent + * @column: the column address for this command, -1 if none + * @page_addr: the page address for this command, -1 if none + * + * Send command to NAND device. This function is used for small page + * devices (256/512 Bytes per page) + */ +static void nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr) +{ + register struct nand_chip *this = mtd->priv; + + /* Begin command latch cycle */ + this->hwcontrol(mtd, NAND_CTL_SETCLE); + /* + * Write out the command to the device. + */ + if (command == NAND_CMD_SEQIN) { + int readcmd; + + if (column >= mtd->oobblock) { + /* OOB area */ + column -= mtd->oobblock; + readcmd = NAND_CMD_READOOB; + } else if (column < 256) { + /* First 256 bytes --> READ0 */ + readcmd = NAND_CMD_READ0; + } else { + column -= 256; + readcmd = NAND_CMD_READ1; + } + this->write_byte(mtd, readcmd); + } + this->write_byte(mtd, command); + + /* Set ALE and clear CLE to start address cycle */ + this->hwcontrol(mtd, NAND_CTL_CLRCLE); + + if (column != -1 || page_addr != -1) { + this->hwcontrol(mtd, NAND_CTL_SETALE); + + /* Serially input address */ + if (column != -1) { + /* Adjust columns for 16 bit buswidth */ + if (this->options & NAND_BUSWIDTH_16) + column >>= 1; + this->write_byte(mtd, column); + } + if (page_addr != -1) { + this->write_byte(mtd, (unsigned char) (page_addr & 0xff)); + this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff)); + /* One more address cycle for devices > 32MiB */ + if (this->chipsize > (32 << 20)) + this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f)); + } + /* Latch in address */ + this->hwcontrol(mtd, NAND_CTL_CLRALE); + } + + /* + * program and erase have their own busy handlers + * status and sequential in needs no delay + */ + switch (command) { + + case NAND_CMD_PAGEPROG: + case NAND_CMD_ERASE1: + case NAND_CMD_ERASE2: + case NAND_CMD_SEQIN: + case NAND_CMD_STATUS: + return; + + case NAND_CMD_RESET: + if (this->dev_ready) + break; + udelay(this->chip_delay); + this->hwcontrol(mtd, NAND_CTL_SETCLE); + this->write_byte(mtd, NAND_CMD_STATUS); + this->hwcontrol(mtd, NAND_CTL_CLRCLE); + while ( !(this->read_byte(mtd) & 0x40)); + return; + + /* This applies to read commands */ + default: + /* + * If we don't have access to the busy pin, we apply the given + * command delay + */ + if (!this->dev_ready) { + udelay (this->chip_delay); + return; + } + } + + /* Apply this short delay always to ensure that we do wait tWB in + * any case on any machine. */ + ndelay (100); + /* wait until command is processed */ + while (!this->dev_ready(mtd)); +} + +/** + * nand_command_lp - [DEFAULT] Send command to NAND large page device + * @mtd: MTD device structure + * @command: the command to be sent + * @column: the column address for this command, -1 if none + * @page_addr: the page address for this command, -1 if none + * + * Send command to NAND device. This is the version for the new large page devices + * We dont have the seperate regions as we have in the small page devices. + * We must emulate NAND_CMD_READOOB to keep the code compatible. + * + */ +static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column, int page_addr) +{ + register struct nand_chip *this = mtd->priv; + + /* Emulate NAND_CMD_READOOB */ + if (command == NAND_CMD_READOOB) { + column += mtd->oobblock; + command = NAND_CMD_READ0; + } + + + /* Begin command latch cycle */ + this->hwcontrol(mtd, NAND_CTL_SETCLE); + /* Write out the command to the device. */ + this->write_byte(mtd, command); + /* End command latch cycle */ + this->hwcontrol(mtd, NAND_CTL_CLRCLE); + + if (column != -1 || page_addr != -1) { + this->hwcontrol(mtd, NAND_CTL_SETALE); + + /* Serially input address */ + if (column != -1) { + /* Adjust columns for 16 bit buswidth */ + if (this->options & NAND_BUSWIDTH_16) + column >>= 1; + this->write_byte(mtd, column & 0xff); + this->write_byte(mtd, column >> 8); + } + if (page_addr != -1) { + this->write_byte(mtd, (unsigned char) (page_addr & 0xff)); + this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff)); + /* One more address cycle for devices > 128MiB */ + if (this->chipsize > (128 << 20)) + this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0xff)); + } + /* Latch in address */ + this->hwcontrol(mtd, NAND_CTL_CLRALE); + } + + /* + * program and erase have their own busy handlers + * status and sequential in needs no delay + */ + switch (command) { + + case NAND_CMD_CACHEDPROG: + case NAND_CMD_PAGEPROG: + case NAND_CMD_ERASE1: + case NAND_CMD_ERASE2: + case NAND_CMD_SEQIN: + case NAND_CMD_STATUS: + return; + + + case NAND_CMD_RESET: + if (this->dev_ready) + break; + udelay(this->chip_delay); + this->hwcontrol(mtd, NAND_CTL_SETCLE); + this->write_byte(mtd, NAND_CMD_STATUS); + this->hwcontrol(mtd, NAND_CTL_CLRCLE); + while ( !(this->read_byte(mtd) & 0x40)); + return; + + case NAND_CMD_READ0: + /* Begin command latch cycle */ + this->hwcontrol(mtd, NAND_CTL_SETCLE); + /* Write out the start read command */ + this->write_byte(mtd, NAND_CMD_READSTART); + /* End command latch cycle */ + this->hwcontrol(mtd, NAND_CTL_CLRCLE); + /* Fall through into ready check */ + + /* This applies to read commands */ + default: + /* + * If we don't have access to the busy pin, we apply the given + * command delay + */ + if (!this->dev_ready) { + udelay (this->chip_delay); + return; + } + } + + /* Apply this short delay always to ensure that we do wait tWB in + * any case on any machine. */ + ndelay (100); + /* wait until command is processed */ + while (!this->dev_ready(mtd)); +} + +/** + * nand_get_device - [GENERIC] Get chip for selected access + * @this: the nand chip descriptor + * @mtd: MTD device structure + * @new_state: the state which is requested + * + * Get the device and lock it for exclusive access + */ +/* XXX U-BOOT XXX */ +#if 0 +static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state) +{ + struct nand_chip *active = this; + + DECLARE_WAITQUEUE (wait, current); + + /* + * Grab the lock and see if the device is available + */ +retry: + /* Hardware controller shared among independend devices */ + if (this->controller) { + spin_lock (&this->controller->lock); + if (this->controller->active) + active = this->controller->active; + else + this->controller->active = this; + spin_unlock (&this->controller->lock); + } + + if (active == this) { + spin_lock (&this->chip_lock); + if (this->state == FL_READY) { + this->state = new_state; + spin_unlock (&this->chip_lock); + return; + } + } + set_current_state (TASK_UNINTERRUPTIBLE); + add_wait_queue (&active->wq, &wait); + spin_unlock (&active->chip_lock); + schedule (); + remove_wait_queue (&active->wq, &wait); + goto retry; +} +#else +static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state) {} +#endif + +/** + * nand_wait - [DEFAULT] wait until the command is done + * @mtd: MTD device structure + * @this: NAND chip structure + * @state: state to select the max. timeout value + * + * Wait for command done. This applies to erase and program only + * Erase can take up to 400ms and program up to 20ms according to + * general NAND and SmartMedia specs + * +*/ +/* XXX U-BOOT XXX */ +#if 0 +static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state) +{ + unsigned long timeo = jiffies; + int status; + + if (state == FL_ERASING) + timeo += (HZ * 400) / 1000; + else + timeo += (HZ * 20) / 1000; + + /* Apply this short delay always to ensure that we do wait tWB in + * any case on any machine. */ + ndelay (100); + + if ((state == FL_ERASING) && (this->options & NAND_IS_AND)) + this->cmdfunc (mtd, NAND_CMD_STATUS_MULTI, -1, -1); + else + this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1); + + while (time_before(jiffies, timeo)) { + /* Check, if we were interrupted */ + if (this->state != state) + return 0; + + if (this->dev_ready) { + if (this->dev_ready(mtd)) + break; + } else { + if (this->read_byte(mtd) & NAND_STATUS_READY) + break; + } + yield (); + } + status = (int) this->read_byte(mtd); + return status; + + return 0; +} +#else +static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state) +{ + unsigned long timeo; + + if (state == FL_ERASING) + timeo = (CFG_HZ * 400) / 1000; + else + timeo = (CFG_HZ * 20) / 1000; + + if ((state == FL_ERASING) && (this->options & NAND_IS_AND)) + this->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1); + else + this->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); + + reset_timer(); + + while (1) { + if (get_timer(0) > timeo) { + printf("Timeout!"); + return 0x01; + } + + if (this->dev_ready) { + if (this->dev_ready(mtd)) + break; + } else { + if (this->read_byte(mtd) & NAND_STATUS_READY) + break; + } + } +#ifdef PPCHAMELON_NAND_TIMER_HACK + reset_timer(); + while (get_timer(0) < 10); +#endif /* PPCHAMELON_NAND_TIMER_HACK */ + + return this->read_byte(mtd); +} +#endif + +/** + * nand_write_page - [GENERIC] write one page + * @mtd: MTD device structure + * @this: NAND chip structure + * @page: startpage inside the chip, must be called with (page & this->pagemask) + * @oob_buf: out of band data buffer + * @oobsel: out of band selecttion structre + * @cached: 1 = enable cached programming if supported by chip + * + * Nand_page_program function is used for write and writev ! + * This function will always program a full page of data + * If you call it with a non page aligned buffer, you're lost :) + * + * Cached programming is not supported yet. + */ +static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, + u_char *oob_buf, struct nand_oobinfo *oobsel, int cached) +{ + int i, status; + u_char ecc_code[32]; + int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE; + uint *oob_config = oobsel->eccpos; + int datidx = 0, eccidx = 0, eccsteps = this->eccsteps; + int eccbytes = 0; + + /* FIXME: Enable cached programming */ + cached = 0; + + /* Send command to begin auto page programming */ + this->cmdfunc (mtd, NAND_CMD_SEQIN, 0x00, page); + + /* Write out complete page of data, take care of eccmode */ + switch (eccmode) { + /* No ecc, write all */ + case NAND_ECC_NONE: + printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n"); + this->write_buf(mtd, this->data_poi, mtd->oobblock); + break; + + /* Software ecc 3/256, write all */ + case NAND_ECC_SOFT: + for (; eccsteps; eccsteps--) { + this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code); + for (i = 0; i < 3; i++, eccidx++) + oob_buf[oob_config[eccidx]] = ecc_code[i]; + datidx += this->eccsize; + } + this->write_buf(mtd, this->data_poi, mtd->oobblock); + break; + default: + eccbytes = this->eccbytes; + for (; eccsteps; eccsteps--) { + /* enable hardware ecc logic for write */ + this->enable_hwecc(mtd, NAND_ECC_WRITE); + this->write_buf(mtd, &this->data_poi[datidx], this->eccsize); + this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code); + for (i = 0; i < eccbytes; i++, eccidx++) + oob_buf[oob_config[eccidx]] = ecc_code[i]; + /* If the hardware ecc provides syndromes then + * the ecc code must be written immidiately after + * the data bytes (words) */ + if (this->options & NAND_HWECC_SYNDROME) + this->write_buf(mtd, ecc_code, eccbytes); + datidx += this->eccsize; + } + break; + } + + /* Write out OOB data */ + if (this->options & NAND_HWECC_SYNDROME) + this->write_buf(mtd, &oob_buf[oobsel->eccbytes], mtd->oobsize - oobsel->eccbytes); + else + this->write_buf(mtd, oob_buf, mtd->oobsize); + + /* Send command to actually program the data */ + this->cmdfunc (mtd, cached ? NAND_CMD_CACHEDPROG : NAND_CMD_PAGEPROG, -1, -1); + + if (!cached) { + /* call wait ready function */ + status = this->waitfunc (mtd, this, FL_WRITING); + /* See if device thinks it succeeded */ + if (status & 0x01) { + DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page); + return -EIO; + } + } else { + /* FIXME: Implement cached programming ! */ + /* wait until cache is ready*/ + /* status = this->waitfunc (mtd, this, FL_CACHEDRPG); */ + } + return 0; +} + +#ifdef CONFIG_MTD_NAND_VERIFY_WRITE +/** + * nand_verify_pages - [GENERIC] verify the chip contents after a write + * @mtd: MTD device structure + * @this: NAND chip structure + * @page: startpage inside the chip, must be called with (page & this->pagemask) + * @numpages: number of pages to verify + * @oob_buf: out of band data buffer + * @oobsel: out of band selecttion structre + * @chipnr: number of the current chip + * @oobmode: 1 = full buffer verify, 0 = ecc only + * + * The NAND device assumes that it is always writing to a cleanly erased page. + * Hence, it performs its internal write verification only on bits that + * transitioned from 1 to 0. The device does NOT verify the whole page on a + * byte by byte basis. It is possible that the page was not completely erased + * or the page is becoming unusable due to wear. The read with ECC would catch + * the error later when the ECC page check fails, but we would rather catch + * it early in the page write stage. Better to write no data than invalid data. + */ +static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages, + u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode) +{ + int i, j, datidx = 0, oobofs = 0, res = -EIO; + int eccsteps = this->eccsteps; + int hweccbytes; + u_char oobdata[64]; + + hweccbytes = (this->options & NAND_HWECC_SYNDROME) ? (oobsel->eccbytes / eccsteps) : 0; + + /* Send command to read back the first page */ + this->cmdfunc (mtd, NAND_CMD_READ0, 0, page); + + for(;;) { + for (j = 0; j < eccsteps; j++) { + /* Loop through and verify the data */ + if (this->verify_buf(mtd, &this->data_poi[datidx], mtd->eccsize)) { + DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page); + goto out; + } + datidx += mtd->eccsize; + /* Have we a hw generator layout ? */ + if (!hweccbytes) + continue; + if (this->verify_buf(mtd, &this->oob_buf[oobofs], hweccbytes)) { + DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page); + goto out; + } + oobofs += hweccbytes; + } + + /* check, if we must compare all data or if we just have to + * compare the ecc bytes + */ + if (oobmode) { + if (this->verify_buf(mtd, &oob_buf[oobofs], mtd->oobsize - hweccbytes * eccsteps)) { + DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page); + goto out; + } + } else { + /* Read always, else autoincrement fails */ + this->read_buf(mtd, oobdata, mtd->oobsize - hweccbytes * eccsteps); + + if (oobsel->useecc != MTD_NANDECC_OFF && !hweccbytes) { + int ecccnt = oobsel->eccbytes; + + for (i = 0; i < ecccnt; i++) { + int idx = oobsel->eccpos[i]; + if (oobdata[idx] != oob_buf[oobofs + idx] ) { + DEBUG (MTD_DEBUG_LEVEL0, + "%s: Failed ECC write " + "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i); + goto out; + } + } + } + } + oobofs += mtd->oobsize - hweccbytes * eccsteps; + page++; + numpages--; + + /* Apply delay or wait for ready/busy pin + * Do this before the AUTOINCR check, so no problems + * arise if a chip which does auto increment + * is marked as NOAUTOINCR by the board driver. + * Do this also before returning, so the chip is + * ready for the next command. + */ + if (!this->dev_ready) + udelay (this->chip_delay); + else + while (!this->dev_ready(mtd)); + + /* All done, return happy */ + if (!numpages) + return 0; + + + /* Check, if the chip supports auto page increment */ + if (!NAND_CANAUTOINCR(this)) + this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page); + } + /* + * Terminate the read command. We come here in case of an error + * So we must issue a reset command. + */ +out: + this->cmdfunc (mtd, NAND_CMD_RESET, -1, -1); + return res; +} +#endif + +/** + * nand_read - [MTD Interface] MTD compability function for nand_read_ecc + * @mtd: MTD device structure + * @from: offset to read from + * @len: number of bytes to read + * @retlen: pointer to variable to store the number of read bytes + * @buf: the databuffer to put data + * + * This function simply calls nand_read_ecc with oob buffer and oobsel = NULL +*/ +static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) +{ + return nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL); +} + + +/** + * nand_read_ecc - [MTD Interface] Read data with ECC + * @mtd: MTD device structure + * @from: offset to read from + * @len: number of bytes to read + * @retlen: pointer to variable to store the number of read bytes + * @buf: the databuffer to put data + * @oob_buf: filesystem supplied oob data buffer + * @oobsel: oob selection structure + * + * NAND read with ECC + */ +static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel) +{ + int i, j, col, realpage, page, end, ecc, chipnr, sndcmd = 1; + int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0; + struct nand_chip *this = mtd->priv; + u_char *data_poi, *oob_data = oob_buf; + u_char ecc_calc[32]; + u_char ecc_code[32]; + int eccmode, eccsteps; + unsigned *oob_config; + int datidx; + int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1; + int eccbytes; + int compareecc = 1; + int oobreadlen; + + + DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); + + /* Do not allow reads past end of device */ + if ((from + len) > mtd->size) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n"); + *retlen = 0; + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + nand_get_device (this, mtd ,FL_READING); + + /* use userspace supplied oobinfo, if zero */ + if (oobsel == NULL) + oobsel = &mtd->oobinfo; + + /* Autoplace of oob data ? Use the default placement scheme */ + if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) + oobsel = this->autooob; + + eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE; + oob_config = oobsel->eccpos; + + /* Select the NAND device */ + chipnr = (int)(from >> this->chip_shift); + this->select_chip(mtd, chipnr); + + /* First we calculate the starting page */ + realpage = (int) (from >> this->page_shift); + page = realpage & this->pagemask; + + /* Get raw starting column */ + col = from & (mtd->oobblock - 1); + + end = mtd->oobblock; + ecc = this->eccsize; + eccbytes = this->eccbytes; + + if ((eccmode == NAND_ECC_NONE) || (this->options & NAND_HWECC_SYNDROME)) + compareecc = 0; + + oobreadlen = mtd->oobsize; + if (this->options & NAND_HWECC_SYNDROME) + oobreadlen -= oobsel->eccbytes; + + /* Loop until all data read */ + while (read < len) { + + int aligned = (!col && (len - read) >= end); + /* + * If the read is not page aligned, we have to read into data buffer + * due to ecc, else we read into return buffer direct + */ + if (aligned) + data_poi = &buf[read]; + else + data_poi = this->data_buf; + + /* Check, if we have this page in the buffer + * + * FIXME: Make it work when we must provide oob data too, + * check the usage of data_buf oob field + */ + if (realpage == this->pagebuf && !oob_buf) { + /* aligned read ? */ + if (aligned) + memcpy (data_poi, this->data_buf, end); + goto readdata; + } + + /* Check, if we must send the read command */ + if (sndcmd) { + this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page); + sndcmd = 0; + } + + /* get oob area, if we have no oob buffer from fs-driver */ + if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE || + oobsel->useecc == MTD_NANDECC_AUTOPL_USR) + oob_data = &this->data_buf[end]; + + eccsteps = this->eccsteps; + + switch (eccmode) { + case NAND_ECC_NONE: { /* No ECC, Read in a page */ +/* XXX U-BOOT XXX */ +#if 0 + static unsigned long lastwhinge = 0; + if ((lastwhinge / HZ) != (jiffies / HZ)) { + printk (KERN_WARNING "Reading data from NAND FLASH without ECC is not recommended\n"); + lastwhinge = jiffies; + } +#else + puts("Reading data from NAND FLASH without ECC is not recommended\n"); +#endif + this->read_buf(mtd, data_poi, end); + break; + } + + case NAND_ECC_SOFT: /* Software ECC 3/256: Read in a page + oob data */ + this->read_buf(mtd, data_poi, end); + for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=3, datidx += ecc) + this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]); + break; + + default: + for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=eccbytes, datidx += ecc) { + this->enable_hwecc(mtd, NAND_ECC_READ); + this->read_buf(mtd, &data_poi[datidx], ecc); + + /* HW ecc with syndrome calculation must read the + * syndrome from flash immidiately after the data */ + if (!compareecc) { + /* Some hw ecc generators need to know when the + * syndrome is read from flash */ + this->enable_hwecc(mtd, NAND_ECC_READSYN); + this->read_buf(mtd, &oob_data[i], eccbytes); + /* We calc error correction directly, it checks the hw + * generator for an error, reads back the syndrome and + * does the error correction on the fly */ + if (this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]) == -1) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " + "Failed ECC read, page 0x%08x on chip %d\n", page, chipnr); + ecc_failed++; + } + } else { + this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]); + } + } + break; + } + + /* read oobdata */ + this->read_buf(mtd, &oob_data[mtd->oobsize - oobreadlen], oobreadlen); + + /* Skip ECC check, if not requested (ECC_NONE or HW_ECC with syndromes) */ + if (!compareecc) + goto readoob; + + /* Pick the ECC bytes out of the oob data */ + for (j = 0; j < oobsel->eccbytes; j++) + ecc_code[j] = oob_data[oob_config[j]]; + + /* correct data, if neccecary */ + for (i = 0, j = 0, datidx = 0; i < this->eccsteps; i++, datidx += ecc) { + ecc_status = this->correct_data(mtd, &data_poi[datidx], &ecc_code[j], &ecc_calc[j]); + + /* Get next chunk of ecc bytes */ + j += eccbytes; + + /* Check, if we have a fs supplied oob-buffer, + * This is the legacy mode. Used by YAFFS1 + * Should go away some day + */ + if (oob_buf && oobsel->useecc == MTD_NANDECC_PLACE) { + int *p = (int *)(&oob_data[mtd->oobsize]); + p[i] = ecc_status; + } + + if (ecc_status == -1) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page); + ecc_failed++; + } + } + + readoob: + /* check, if we have a fs supplied oob-buffer */ + if (oob_buf) { + /* without autoplace. Legacy mode used by YAFFS1 */ + switch(oobsel->useecc) { + case MTD_NANDECC_AUTOPLACE: + case MTD_NANDECC_AUTOPL_USR: + /* Walk through the autoplace chunks */ + for (i = 0, j = 0; j < mtd->oobavail; i++) { + int from = oobsel->oobfree[i][0]; + int num = oobsel->oobfree[i][1]; + memcpy(&oob_buf[oob], &oob_data[from], num); + j+= num; + } + oob += mtd->oobavail; + break; + case MTD_NANDECC_PLACE: + /* YAFFS1 legacy mode */ + oob_data += this->eccsteps * sizeof (int); + default: + oob_data += mtd->oobsize; + } + } + readdata: + /* Partial page read, transfer data into fs buffer */ + if (!aligned) { + for (j = col; j < end && read < len; j++) + buf[read++] = data_poi[j]; + this->pagebuf = realpage; + } else + read += mtd->oobblock; + + /* Apply delay or wait for ready/busy pin + * Do this before the AUTOINCR check, so no problems + * arise if a chip which does auto increment + * is marked as NOAUTOINCR by the board driver. + */ + if (!this->dev_ready) + udelay (this->chip_delay); + else + while (!this->dev_ready(mtd)); + + if (read == len) + break; + + /* For subsequent reads align to page boundary. */ + col = 0; + /* Increment page address */ + realpage++; + + page = realpage & this->pagemask; + /* Check, if we cross a chip boundary */ + if (!page) { + chipnr++; + this->select_chip(mtd, -1); + this->select_chip(mtd, chipnr); + } + /* Check, if the chip supports auto page increment + * or if we have hit a block boundary. + */ + if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) + sndcmd = 1; + } + + /* Deselect and wake up anyone waiting on the device */ + nand_release_device(mtd); + + /* + * Return success, if no ECC failures, else -EBADMSG + * fs driver will take care of that, because + * retlen == desired len and result == -EBADMSG + */ + *retlen = read; + return ecc_failed ? -EBADMSG : 0; +} + +/** + * nand_read_oob - [MTD Interface] NAND read out-of-band + * @mtd: MTD device structure + * @from: offset to read from + * @len: number of bytes to read + * @retlen: pointer to variable to store the number of read bytes + * @buf: the databuffer to put data + * + * NAND read out-of-band data from the spare area + */ +static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) +{ + int i, col, page, chipnr; + struct nand_chip *this = mtd->priv; + int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1; + + DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); + + /* Shift to get page */ + page = (int)(from >> this->page_shift); + chipnr = (int)(from >> this->chip_shift); + + /* Mask to get column */ + col = from & (mtd->oobsize - 1); + + /* Initialize return length value */ + *retlen = 0; + + /* Do not allow reads past end of device */ + if ((from + len) > mtd->size) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: Attempt read beyond end of device\n"); + *retlen = 0; + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + nand_get_device (this, mtd , FL_READING); + + /* Select the NAND device */ + this->select_chip(mtd, chipnr); + + /* Send the read command */ + this->cmdfunc (mtd, NAND_CMD_READOOB, col, page & this->pagemask); + /* + * Read the data, if we read more than one page + * oob data, let the device transfer the data ! + */ + i = 0; + while (i < len) { + int thislen = mtd->oobsize - col; + thislen = min_t(int, thislen, len); + this->read_buf(mtd, &buf[i], thislen); + i += thislen; + + /* Apply delay or wait for ready/busy pin + * Do this before the AUTOINCR check, so no problems + * arise if a chip which does auto increment + * is marked as NOAUTOINCR by the board driver. + */ + if (!this->dev_ready) + udelay (this->chip_delay); + else + while (!this->dev_ready(mtd)); + + /* Read more ? */ + if (i < len) { + page++; + col = 0; + + /* Check, if we cross a chip boundary */ + if (!(page & this->pagemask)) { + chipnr++; + this->select_chip(mtd, -1); + this->select_chip(mtd, chipnr); + } + + /* Check, if the chip supports auto page increment + * or if we have hit a block boundary. + */ + if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) { + /* For subsequent page reads set offset to 0 */ + this->cmdfunc (mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask); + } + } + } + + /* Deselect and wake up anyone waiting on the device */ + nand_release_device(mtd); + + /* Return happy */ + *retlen = len; + return 0; +} + +/** + * nand_read_raw - [GENERIC] Read raw data including oob into buffer + * @mtd: MTD device structure + * @buf: temporary buffer + * @from: offset to read from + * @len: number of bytes to read + * @ooblen: number of oob data bytes to read + * + * Read raw data including oob into buffer + */ +int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen) +{ + struct nand_chip *this = mtd->priv; + int page = (int) (from >> this->page_shift); + int chip = (int) (from >> this->chip_shift); + int sndcmd = 1; + int cnt = 0; + int pagesize = mtd->oobblock + mtd->oobsize; + int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1; + + /* Do not allow reads past end of device */ + if ((from + len) > mtd->size) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_read_raw: Attempt read beyond end of device\n"); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + nand_get_device (this, mtd , FL_READING); + + this->select_chip (mtd, chip); + + /* Add requested oob length */ + len += ooblen; + + while (len) { + if (sndcmd) + this->cmdfunc (mtd, NAND_CMD_READ0, 0, page & this->pagemask); + sndcmd = 0; + + this->read_buf (mtd, &buf[cnt], pagesize); + + len -= pagesize; + cnt += pagesize; + page++; + + if (!this->dev_ready) + udelay (this->chip_delay); + else + while (!this->dev_ready(mtd)); + + /* Check, if the chip supports auto page increment */ + if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) + sndcmd = 1; + } + + /* Deselect and wake up anyone waiting on the device */ + nand_release_device(mtd); + return 0; +} + + +/** + * nand_prepare_oobbuf - [GENERIC] Prepare the out of band buffer + * @mtd: MTD device structure + * @fsbuf: buffer given by fs driver + * @oobsel: out of band selection structre + * @autoplace: 1 = place given buffer into the oob bytes + * @numpages: number of pages to prepare + * + * Return: + * 1. Filesystem buffer available and autoplacement is off, + * return filesystem buffer + * 2. No filesystem buffer or autoplace is off, return internal + * buffer + * 3. Filesystem buffer is given and autoplace selected + * put data from fs buffer into internal buffer and + * retrun internal buffer + * + * Note: The internal buffer is filled with 0xff. This must + * be done only once, when no autoplacement happens + * Autoplacement sets the buffer dirty flag, which + * forces the 0xff fill before using the buffer again. + * +*/ +static u_char * nand_prepare_oobbuf (struct mtd_info *mtd, u_char *fsbuf, struct nand_oobinfo *oobsel, + int autoplace, int numpages) +{ + struct nand_chip *this = mtd->priv; + int i, len, ofs; + + /* Zero copy fs supplied buffer */ + if (fsbuf && !autoplace) + return fsbuf; + + /* Check, if the buffer must be filled with ff again */ + if (this->oobdirty) { + memset (this->oob_buf, 0xff, + mtd->oobsize << (this->phys_erase_shift - this->page_shift)); + this->oobdirty = 0; + } + + /* If we have no autoplacement or no fs buffer use the internal one */ + if (!autoplace || !fsbuf) + return this->oob_buf; + + /* Walk through the pages and place the data */ + this->oobdirty = 1; + ofs = 0; + while (numpages--) { + for (i = 0, len = 0; len < mtd->oobavail; i++) { + int to = ofs + oobsel->oobfree[i][0]; + int num = oobsel->oobfree[i][1]; + memcpy (&this->oob_buf[to], fsbuf, num); + len += num; + fsbuf += num; + } + ofs += mtd->oobavail; + } + return this->oob_buf; +} + +#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0 + +/** + * nand_write - [MTD Interface] compability function for nand_write_ecc + * @mtd: MTD device structure + * @to: offset to write to + * @len: number of bytes to write + * @retlen: pointer to variable to store the number of written bytes + * @buf: the data to write + * + * This function simply calls nand_write_ecc with oob buffer and oobsel = NULL + * +*/ +static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf) +{ + return (nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL)); +} + +/** + * nand_write_ecc - [MTD Interface] NAND write with ECC + * @mtd: MTD device structure + * @to: offset to write to + * @len: number of bytes to write + * @retlen: pointer to variable to store the number of written bytes + * @buf: the data to write + * @eccbuf: filesystem supplied oob data buffer + * @oobsel: oob selection structure + * + * NAND write with ECC + */ +static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, + size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel) +{ + int startpage, page, ret = -EIO, oob = 0, written = 0, chipnr; + int autoplace = 0, numpages, totalpages; + struct nand_chip *this = mtd->priv; + u_char *oobbuf, *bufstart; + int ppblock = (1 << (this->phys_erase_shift - this->page_shift)); + + DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); + + /* Initialize retlen, in case of early exit */ + *retlen = 0; + + /* Do not allow write past end of device */ + if ((to + len) > mtd->size) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n"); + return -EINVAL; + } + + /* reject writes, which are not page aligned */ + if (NOTALIGNED (to) || NOTALIGNED(len)) { + printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n"); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + nand_get_device (this, mtd, FL_WRITING); + + /* Calculate chipnr */ + chipnr = (int)(to >> this->chip_shift); + /* Select the NAND device */ + this->select_chip(mtd, chipnr); + + /* Check, if it is write protected */ + if (nand_check_wp(mtd)) + goto out; + + /* if oobsel is NULL, use chip defaults */ + if (oobsel == NULL) + oobsel = &mtd->oobinfo; + + /* Autoplace of oob data ? Use the default placement scheme */ + if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) { + oobsel = this->autooob; + autoplace = 1; + } + if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR) + autoplace = 1; + + /* Setup variables and oob buffer */ + totalpages = len >> this->page_shift; + page = (int) (to >> this->page_shift); + /* Invalidate the page cache, if we write to the cached page */ + if (page <= this->pagebuf && this->pagebuf < (page + totalpages)) + this->pagebuf = -1; + + /* Set it relative to chip */ + page &= this->pagemask; + startpage = page; + /* Calc number of pages we can write in one go */ + numpages = min (ppblock - (startpage & (ppblock - 1)), totalpages); + oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, autoplace, numpages); + bufstart = (u_char *)buf; + + /* Loop until all data is written */ + while (written < len) { + + this->data_poi = (u_char*) &buf[written]; + /* Write one page. If this is the last page to write + * or the last page in this block, then use the + * real pageprogram command, else select cached programming + * if supported by the chip. + */ + ret = nand_write_page (mtd, this, page, &oobbuf[oob], oobsel, (--numpages > 0)); + if (ret) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: write_page failed %d\n", ret); + goto out; + } + /* Next oob page */ + oob += mtd->oobsize; + /* Update written bytes count */ + written += mtd->oobblock; + if (written == len) + goto cmp; + + /* Increment page address */ + page++; + + /* Have we hit a block boundary ? Then we have to verify and + * if verify is ok, we have to setup the oob buffer for + * the next pages. + */ + if (!(page & (ppblock - 1))){ + int ofs; + this->data_poi = bufstart; + ret = nand_verify_pages (mtd, this, startpage, + page - startpage, + oobbuf, oobsel, chipnr, (eccbuf != NULL)); + if (ret) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret); + goto out; + } + *retlen = written; + bufstart = (u_char*) &buf[written]; + + ofs = autoplace ? mtd->oobavail : mtd->oobsize; + if (eccbuf) + eccbuf += (page - startpage) * ofs; + totalpages -= page - startpage; + numpages = min (totalpages, ppblock); + page &= this->pagemask; + startpage = page; + oob = 0; + this->oobdirty = 1; + oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, + autoplace, numpages); + /* Check, if we cross a chip boundary */ + if (!page) { + chipnr++; + this->select_chip(mtd, -1); + this->select_chip(mtd, chipnr); + } + } + } + /* Verify the remaining pages */ +cmp: + this->data_poi = bufstart; + ret = nand_verify_pages (mtd, this, startpage, totalpages, + oobbuf, oobsel, chipnr, (eccbuf != NULL)); + if (!ret) + *retlen = written; + else + DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret); + +out: + /* Deselect and wake up anyone waiting on the device */ + nand_release_device(mtd); + + return ret; +} + + +/** + * nand_write_oob - [MTD Interface] NAND write out-of-band + * @mtd: MTD device structure + * @to: offset to write to + * @len: number of bytes to write + * @retlen: pointer to variable to store the number of written bytes + * @buf: the data to write + * + * NAND write out-of-band + */ +static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf) +{ + int column, page, status, ret = -EIO, chipnr; + struct nand_chip *this = mtd->priv; + + DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); + + /* Shift to get page */ + page = (int) (to >> this->page_shift); + chipnr = (int) (to >> this->chip_shift); + + /* Mask to get column */ + column = to & (mtd->oobsize - 1); + + /* Initialize return length value */ + *retlen = 0; + + /* Do not allow write past end of page */ + if ((column + len) > mtd->oobsize) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n"); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + nand_get_device (this, mtd, FL_WRITING); + + /* Select the NAND device */ + this->select_chip(mtd, chipnr); + + /* Reset the chip. Some chips (like the Toshiba TC5832DC found + in one of my DiskOnChip 2000 test units) will clear the whole + data page too if we don't do this. I have no clue why, but + I seem to have 'fixed' it in the doc2000 driver in + August 1999. dwmw2. */ + this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + + /* Check, if it is write protected */ + if (nand_check_wp(mtd)) + goto out; + + /* Invalidate the page cache, if we write to the cached page */ + if (page == this->pagebuf) + this->pagebuf = -1; + + if (NAND_MUST_PAD(this)) { + /* Write out desired data */ + this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page & this->pagemask); + /* prepad 0xff for partial programming */ + this->write_buf(mtd, ffchars, column); + /* write data */ + this->write_buf(mtd, buf, len); + /* postpad 0xff for partial programming */ + this->write_buf(mtd, ffchars, mtd->oobsize - (len+column)); + } else { + /* Write out desired data */ + this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock + column, page & this->pagemask); + /* write data */ + this->write_buf(mtd, buf, len); + } + /* Send command to program the OOB data */ + this->cmdfunc (mtd, NAND_CMD_PAGEPROG, -1, -1); + + status = this->waitfunc (mtd, this, FL_WRITING); + + /* See if device thinks it succeeded */ + if (status & 0x01) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page); + ret = -EIO; + goto out; + } + /* Return happy */ + *retlen = len; + +#ifdef CONFIG_MTD_NAND_VERIFY_WRITE + /* Send command to read back the data */ + this->cmdfunc (mtd, NAND_CMD_READOOB, column, page & this->pagemask); + + if (this->verify_buf(mtd, buf, len)) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write verify, page 0x%08x\n", page); + ret = -EIO; + goto out; + } +#endif + ret = 0; +out: + /* Deselect and wake up anyone waiting on the device */ + nand_release_device(mtd); + + return ret; +} + +/* XXX U-BOOT XXX */ +#if 0 +/** + * nand_writev - [MTD Interface] compabilty function for nand_writev_ecc + * @mtd: MTD device structure + * @vecs: the iovectors to write + * @count: number of vectors + * @to: offset to write to + * @retlen: pointer to variable to store the number of written bytes + * + * NAND write with kvec. This just calls the ecc function + */ +static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, + loff_t to, size_t * retlen) +{ + return (nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, NULL)); +} + +/** + * nand_writev_ecc - [MTD Interface] write with iovec with ecc + * @mtd: MTD device structure + * @vecs: the iovectors to write + * @count: number of vectors + * @to: offset to write to + * @retlen: pointer to variable to store the number of written bytes + * @eccbuf: filesystem supplied oob data buffer + * @oobsel: oob selection structure + * + * NAND write with iovec with ecc + */ +static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, + loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel) +{ + int i, page, len, total_len, ret = -EIO, written = 0, chipnr; + int oob, numpages, autoplace = 0, startpage; + struct nand_chip *this = mtd->priv; + int ppblock = (1 << (this->phys_erase_shift - this->page_shift)); + u_char *oobbuf, *bufstart; + + /* Preset written len for early exit */ + *retlen = 0; + + /* Calculate total length of data */ + total_len = 0; + for (i = 0; i < count; i++) + total_len += (int) vecs[i].iov_len; + + DEBUG (MTD_DEBUG_LEVEL3, + "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count); + + /* Do not allow write past end of page */ + if ((to + total_len) > mtd->size) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n"); + return -EINVAL; + } + + /* reject writes, which are not page aligned */ + if (NOTALIGNED (to) || NOTALIGNED(total_len)) { + printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n"); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + nand_get_device (this, mtd, FL_WRITING); + + /* Get the current chip-nr */ + chipnr = (int) (to >> this->chip_shift); + /* Select the NAND device */ + this->select_chip(mtd, chipnr); + + /* Check, if it is write protected */ + if (nand_check_wp(mtd)) + goto out; + + /* if oobsel is NULL, use chip defaults */ + if (oobsel == NULL) + oobsel = &mtd->oobinfo; + + /* Autoplace of oob data ? Use the default placement scheme */ + if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) { + oobsel = this->autooob; + autoplace = 1; + } + if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR) + autoplace = 1; + + /* Setup start page */ + page = (int) (to >> this->page_shift); + /* Invalidate the page cache, if we write to the cached page */ + if (page <= this->pagebuf && this->pagebuf < ((to + total_len) >> this->page_shift)) + this->pagebuf = -1; + + startpage = page & this->pagemask; + + /* Loop until all kvec' data has been written */ + len = 0; + while (count) { + /* If the given tuple is >= pagesize then + * write it out from the iov + */ + if ((vecs->iov_len - len) >= mtd->oobblock) { + /* Calc number of pages we can write + * out of this iov in one go */ + numpages = (vecs->iov_len - len) >> this->page_shift; + /* Do not cross block boundaries */ + numpages = min (ppblock - (startpage & (ppblock - 1)), numpages); + oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages); + bufstart = (u_char *)vecs->iov_base; + bufstart += len; + this->data_poi = bufstart; + oob = 0; + for (i = 1; i <= numpages; i++) { + /* Write one page. If this is the last page to write + * then use the real pageprogram command, else select + * cached programming if supported by the chip. + */ + ret = nand_write_page (mtd, this, page & this->pagemask, + &oobbuf[oob], oobsel, i != numpages); + if (ret) + goto out; + this->data_poi += mtd->oobblock; + len += mtd->oobblock; + oob += mtd->oobsize; + page++; + } + /* Check, if we have to switch to the next tuple */ + if (len >= (int) vecs->iov_len) { + vecs++; + len = 0; + count--; + } + } else { + /* We must use the internal buffer, read data out of each + * tuple until we have a full page to write + */ + int cnt = 0; + while (cnt < mtd->oobblock) { + if (vecs->iov_base != NULL && vecs->iov_len) + this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++]; + /* Check, if we have to switch to the next tuple */ + if (len >= (int) vecs->iov_len) { + vecs++; + len = 0; + count--; + } + } + this->pagebuf = page; + this->data_poi = this->data_buf; + bufstart = this->data_poi; + numpages = 1; + oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages); + ret = nand_write_page (mtd, this, page & this->pagemask, + oobbuf, oobsel, 0); + if (ret) + goto out; + page++; + } + + this->data_poi = bufstart; + ret = nand_verify_pages (mtd, this, startpage, numpages, oobbuf, oobsel, chipnr, 0); + if (ret) + goto out; + + written += mtd->oobblock * numpages; + /* All done ? */ + if (!count) + break; + + startpage = page & this->pagemask; + /* Check, if we cross a chip boundary */ + if (!startpage) { + chipnr++; + this->select_chip(mtd, -1); + this->select_chip(mtd, chipnr); + } + } + ret = 0; +out: + /* Deselect and wake up anyone waiting on the device */ + nand_release_device(mtd); + + *retlen = written; + return ret; +} +#endif + +/** + * single_erease_cmd - [GENERIC] NAND standard block erase command function + * @mtd: MTD device structure + * @page: the page address of the block which will be erased + * + * Standard erase command for NAND chips + */ +static void single_erase_cmd (struct mtd_info *mtd, int page) +{ + struct nand_chip *this = mtd->priv; + /* Send commands to erase a block */ + this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page); + this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1); +} + +/** + * multi_erease_cmd - [GENERIC] AND specific block erase command function + * @mtd: MTD device structure + * @page: the page address of the block which will be erased + * + * AND multi block erase command function + * Erase 4 consecutive blocks + */ +static void multi_erase_cmd (struct mtd_info *mtd, int page) +{ + struct nand_chip *this = mtd->priv; + /* Send commands to erase a block */ + this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++); + this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++); + this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++); + this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page); + this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1); +} + +/** + * nand_erase - [MTD Interface] erase block(s) + * @mtd: MTD device structure + * @instr: erase instruction + * + * Erase one ore more blocks + */ +static int nand_erase (struct mtd_info *mtd, struct erase_info *instr) +{ + return nand_erase_nand (mtd, instr, 0); +} + +/** + * nand_erase_intern - [NAND Interface] erase block(s) + * @mtd: MTD device structure + * @instr: erase instruction + * @allowbbt: allow erasing the bbt area + * + * Erase one ore more blocks + */ +int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt) +{ + int page, len, status, pages_per_block, ret, chipnr; + struct nand_chip *this = mtd->priv; + + DEBUG (MTD_DEBUG_LEVEL3, + "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len); + + /* Start address must align on block boundary */ + if (instr->addr & ((1 << this->phys_erase_shift) - 1)) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n"); + return -EINVAL; + } + + /* Length must align on block boundary */ + if (instr->len & ((1 << this->phys_erase_shift) - 1)) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n"); + return -EINVAL; + } + + /* Do not allow erase past end of device */ + if ((instr->len + instr->addr) > mtd->size) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n"); + return -EINVAL; + } + + instr->fail_addr = 0xffffffff; + + /* Grab the lock and see if the device is available */ + nand_get_device (this, mtd, FL_ERASING); + + /* Shift to get first page */ + page = (int) (instr->addr >> this->page_shift); + chipnr = (int) (instr->addr >> this->chip_shift); + + /* Calculate pages in each block */ + pages_per_block = 1 << (this->phys_erase_shift - this->page_shift); + + /* Select the NAND device */ + this->select_chip(mtd, chipnr); + + /* Check the WP bit */ + /* Check, if it is write protected */ + if (nand_check_wp(mtd)) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n"); + instr->state = MTD_ERASE_FAILED; + goto erase_exit; + } + + /* Loop through the pages */ + len = instr->len; + + instr->state = MTD_ERASING; + + while (len) { +#ifndef NAND_ALLOW_ERASE_ALL + /* Check if we have a bad block, we do not erase bad blocks ! */ + if (nand_block_checkbad(mtd, ((loff_t) page) << this->page_shift, 0, allowbbt)) { + printk (KERN_WARNING "nand_erase: attempt to erase a bad block at page 0x%08x\n", page); + instr->state = MTD_ERASE_FAILED; + goto erase_exit; + } +#endif + /* Invalidate the page cache, if we erase the block which contains + the current cached page */ + if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block)) + this->pagebuf = -1; + + this->erase_cmd (mtd, page & this->pagemask); + + status = this->waitfunc (mtd, this, FL_ERASING); + + /* See if block erase succeeded */ + if (status & 0x01) { + DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page); + instr->state = MTD_ERASE_FAILED; + instr->fail_addr = (page << this->page_shift); + goto erase_exit; + } + + /* Increment page address and decrement length */ + len -= (1 << this->phys_erase_shift); + page += pages_per_block; + + /* Check, if we cross a chip boundary */ + if (len && !(page & this->pagemask)) { + chipnr++; + this->select_chip(mtd, -1); + this->select_chip(mtd, chipnr); + } + } + instr->state = MTD_ERASE_DONE; + +erase_exit: + + ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO; + /* Do call back function */ + if (!ret) + mtd_erase_callback(instr); + + /* Deselect and wake up anyone waiting on the device */ + nand_release_device(mtd); + + /* Return more or less happy */ + return ret; +} + +/** + * nand_sync - [MTD Interface] sync + * @mtd: MTD device structure + * + * Sync is actually a wait for chip ready function + */ +static void nand_sync (struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + + DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n"); + + /* Grab the lock and see if the device is available */ + nand_get_device (this, mtd, FL_SYNCING); + /* Release it and go back */ + nand_release_device (mtd); +} + + +/** + * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad + * @mtd: MTD device structure + * @ofs: offset relative to mtd start + */ +static int nand_block_isbad (struct mtd_info *mtd, loff_t ofs) +{ + /* Check for invalid offset */ + if (ofs > mtd->size) + return -EINVAL; + + return nand_block_checkbad (mtd, ofs, 1, 0); +} + +/** + * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad + * @mtd: MTD device structure + * @ofs: offset relative to mtd start + */ +static int nand_block_markbad (struct mtd_info *mtd, loff_t ofs) +{ + struct nand_chip *this = mtd->priv; + int ret; + + if ((ret = nand_block_isbad(mtd, ofs))) { + /* If it was bad already, return success and do nothing. */ + if (ret > 0) + return 0; + return ret; + } + + return this->block_markbad(mtd, ofs); +} + +/** + * nand_scan - [NAND Interface] Scan for the NAND device + * @mtd: MTD device structure + * @maxchips: Number of chips to scan for + * + * This fills out all the not initialized function pointers + * with the defaults. + * The flash ID is read and the mtd/chip structures are + * filled with the appropriate values. Buffers are allocated if + * they are not provided by the board driver + * + */ +int nand_scan (struct mtd_info *mtd, int maxchips) +{ + int i, j, nand_maf_id, nand_dev_id, busw; + struct nand_chip *this = mtd->priv; + + /* Get buswidth to select the correct functions*/ + busw = this->options & NAND_BUSWIDTH_16; + + /* check for proper chip_delay setup, set 20us if not */ + if (!this->chip_delay) + this->chip_delay = 20; + + /* check, if a user supplied command function given */ + if (this->cmdfunc == NULL) + this->cmdfunc = nand_command; + + /* check, if a user supplied wait function given */ + if (this->waitfunc == NULL) + this->waitfunc = nand_wait; + + if (!this->select_chip) + this->select_chip = nand_select_chip; + if (!this->write_byte) + this->write_byte = busw ? nand_write_byte16 : nand_write_byte; + if (!this->read_byte) + this->read_byte = busw ? nand_read_byte16 : nand_read_byte; + if (!this->write_word) + this->write_word = nand_write_word; + if (!this->read_word) + this->read_word = nand_read_word; + if (!this->block_bad) + this->block_bad = nand_block_bad; + if (!this->block_markbad) + this->block_markbad = nand_default_block_markbad; + if (!this->write_buf) + this->write_buf = busw ? nand_write_buf16 : nand_write_buf; + if (!this->read_buf) + this->read_buf = busw ? nand_read_buf16 : nand_read_buf; + if (!this->verify_buf) + this->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf; + if (!this->scan_bbt) + this->scan_bbt = nand_default_bbt; + + /* Select the device */ + this->select_chip(mtd, 0); + + /* Send the command for reading device ID */ + this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1); + + /* Read manufacturer and device IDs */ + nand_maf_id = this->read_byte(mtd); + nand_dev_id = this->read_byte(mtd); + + /* Print and store flash device information */ + for (i = 0; nand_flash_ids[i].name != NULL; i++) { + + if (nand_dev_id != nand_flash_ids[i].id) + continue; + + if (!mtd->name) mtd->name = nand_flash_ids[i].name; + this->chipsize = nand_flash_ids[i].chipsize << 20; + + /* New devices have all the information in additional id bytes */ + if (!nand_flash_ids[i].pagesize) { + int extid; + /* The 3rd id byte contains non relevant data ATM */ + extid = this->read_byte(mtd); + /* The 4th id byte is the important one */ + extid = this->read_byte(mtd); + /* Calc pagesize */ + mtd->oobblock = 1024 << (extid & 0x3); + extid >>= 2; + /* Calc oobsize */ + mtd->oobsize = (8 << (extid & 0x01)) * (mtd->oobblock / 512); + extid >>= 2; + /* Calc blocksize. Blocksize is multiples of 64KiB */ + mtd->erasesize = (64 * 1024) << (extid & 0x03); + extid >>= 2; + /* Get buswidth information */ + busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0; + + } else { + /* Old devices have this data hardcoded in the + * device id table */ + mtd->erasesize = nand_flash_ids[i].erasesize; + mtd->oobblock = nand_flash_ids[i].pagesize; + mtd->oobsize = mtd->oobblock / 32; + busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16; + } + + /* Check, if buswidth is correct. Hardware drivers should set + * this correct ! */ + if (busw != (this->options & NAND_BUSWIDTH_16)) { + printk (KERN_INFO "NAND device: Manufacturer ID:" + " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, + nand_manuf_ids[i].name , mtd->name); + printk (KERN_WARNING + "NAND bus width %d instead %d bit\n", + (this->options & NAND_BUSWIDTH_16) ? 16 : 8, + busw ? 16 : 8); + this->select_chip(mtd, -1); + return 1; + } + + /* Calculate the address shift from the page size */ + this->page_shift = ffs(mtd->oobblock) - 1; + this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1; + this->chip_shift = ffs(this->chipsize) - 1; + + /* Set the bad block position */ + this->badblockpos = mtd->oobblock > 512 ? + NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS; + + /* Get chip options, preserve non chip based options */ + this->options &= ~NAND_CHIPOPTIONS_MSK; + this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK; + /* Set this as a default. Board drivers can override it, if neccecary */ + this->options |= NAND_NO_AUTOINCR; + /* Check if this is a not a samsung device. Do not clear the options + * for chips which are not having an extended id. + */ + if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize) + this->options &= ~NAND_SAMSUNG_LP_OPTIONS; + + /* Check for AND chips with 4 page planes */ + if (this->options & NAND_4PAGE_ARRAY) + this->erase_cmd = multi_erase_cmd; + else + this->erase_cmd = single_erase_cmd; + + /* Do not replace user supplied command function ! */ + if (mtd->oobblock > 512 && this->cmdfunc == nand_command) + this->cmdfunc = nand_command_lp; + + /* Try to identify manufacturer */ + for (j = 0; nand_manuf_ids[j].id != 0x0; j++) { + if (nand_manuf_ids[j].id == nand_maf_id) + break; + } + break; + } + + if (!nand_flash_ids[i].name) { +#ifndef CFG_NAND_QUIET_TEST + printk (KERN_WARNING "No NAND device found!!!\n"); +#endif + this->select_chip(mtd, -1); + return 1; + } + + for (i=1; i < maxchips; i++) { + this->select_chip(mtd, i); + + /* Send the command for reading device ID */ + this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1); + + /* Read manufacturer and device IDs */ + if (nand_maf_id != this->read_byte(mtd) || + nand_dev_id != this->read_byte(mtd)) + break; + } + if (i > 1) + printk(KERN_INFO "%d NAND chips detected\n", i); + + /* Allocate buffers, if neccecary */ + if (!this->oob_buf) { + size_t len; + len = mtd->oobsize << (this->phys_erase_shift - this->page_shift); + this->oob_buf = kmalloc (len, GFP_KERNEL); + if (!this->oob_buf) { + printk (KERN_ERR "nand_scan(): Cannot allocate oob_buf\n"); + return -ENOMEM; + } + this->options |= NAND_OOBBUF_ALLOC; + } + + if (!this->data_buf) { + size_t len; + len = mtd->oobblock + mtd->oobsize; + this->data_buf = kmalloc (len, GFP_KERNEL); + if (!this->data_buf) { + if (this->options & NAND_OOBBUF_ALLOC) + kfree (this->oob_buf); + printk (KERN_ERR "nand_scan(): Cannot allocate data_buf\n"); + return -ENOMEM; + } + this->options |= NAND_DATABUF_ALLOC; + } + + /* Store the number of chips and calc total size for mtd */ + this->numchips = i; + mtd->size = i * this->chipsize; + /* Convert chipsize to number of pages per chip -1. */ + this->pagemask = (this->chipsize >> this->page_shift) - 1; + /* Preset the internal oob buffer */ + memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift)); + + /* If no default placement scheme is given, select an + * appropriate one */ + if (!this->autooob) { + /* Select the appropriate default oob placement scheme for + * placement agnostic filesystems */ + switch (mtd->oobsize) { + case 8: + this->autooob = &nand_oob_8; + break; + case 16: + this->autooob = &nand_oob_16; + break; + case 64: + this->autooob = &nand_oob_64; + break; + default: + printk (KERN_WARNING "No oob scheme defined for oobsize %d\n", + mtd->oobsize); +/* BUG(); */ + } + } + + /* The number of bytes available for the filesystem to place fs dependend + * oob data */ + if (this->options & NAND_BUSWIDTH_16) { + mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2); + if (this->autooob->eccbytes & 0x01) + mtd->oobavail--; + } else + mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1); + + /* + * check ECC mode, default to software + * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize + * fallback to software ECC + */ + this->eccsize = 256; /* set default eccsize */ + this->eccbytes = 3; + + switch (this->eccmode) { + case NAND_ECC_HW12_2048: + if (mtd->oobblock < 2048) { + printk(KERN_WARNING "2048 byte HW ECC not possible on %d byte page size, fallback to SW ECC\n", + mtd->oobblock); + this->eccmode = NAND_ECC_SOFT; + this->calculate_ecc = nand_calculate_ecc; + this->correct_data = nand_correct_data; + } else + this->eccsize = 2048; + break; + + case NAND_ECC_HW3_512: + case NAND_ECC_HW6_512: + case NAND_ECC_HW8_512: + if (mtd->oobblock == 256) { + printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n"); + this->eccmode = NAND_ECC_SOFT; + this->calculate_ecc = nand_calculate_ecc; + this->correct_data = nand_correct_data; + } else + this->eccsize = 512; /* set eccsize to 512 */ + break; + + case NAND_ECC_HW3_256: + break; + + case NAND_ECC_NONE: + printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n"); + this->eccmode = NAND_ECC_NONE; + break; + + case NAND_ECC_SOFT: + this->calculate_ecc = nand_calculate_ecc; + this->correct_data = nand_correct_data; + break; + + default: + printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode); +/* BUG(); */ + } + + /* Check hardware ecc function availability and adjust number of ecc bytes per + * calculation step + */ + switch (this->eccmode) { + case NAND_ECC_HW12_2048: + this->eccbytes += 4; + case NAND_ECC_HW8_512: + this->eccbytes += 2; + case NAND_ECC_HW6_512: + this->eccbytes += 3; + case NAND_ECC_HW3_512: + case NAND_ECC_HW3_256: + if (this->calculate_ecc && this->correct_data && this->enable_hwecc) + break; + printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n"); +/* BUG(); */ + } + + mtd->eccsize = this->eccsize; + + /* Set the number of read / write steps for one page to ensure ECC generation */ + switch (this->eccmode) { + case NAND_ECC_HW12_2048: + this->eccsteps = mtd->oobblock / 2048; + break; + case NAND_ECC_HW3_512: + case NAND_ECC_HW6_512: + case NAND_ECC_HW8_512: + this->eccsteps = mtd->oobblock / 512; + break; + case NAND_ECC_HW3_256: + case NAND_ECC_SOFT: + this->eccsteps = mtd->oobblock / 256; + break; + + case NAND_ECC_NONE: + this->eccsteps = 1; + break; + } + +/* XXX U-BOOT XXX */ +#if 0 + /* Initialize state, waitqueue and spinlock */ + this->state = FL_READY; + init_waitqueue_head (&this->wq); + spin_lock_init (&this->chip_lock); +#endif + + /* De-select the device */ + this->select_chip(mtd, -1); + + /* Invalidate the pagebuffer reference */ + this->pagebuf = -1; + + /* Fill in remaining MTD driver data */ + mtd->type = MTD_NANDFLASH; + mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC; + mtd->ecctype = MTD_ECC_SW; + mtd->erase = nand_erase; + mtd->point = NULL; + mtd->unpoint = NULL; + mtd->read = nand_read; + mtd->write = nand_write; + mtd->read_ecc = nand_read_ecc; + mtd->write_ecc = nand_write_ecc; + mtd->read_oob = nand_read_oob; + mtd->write_oob = nand_write_oob; +/* XXX U-BOOT XXX */ +#if 0 + mtd->readv = NULL; + mtd->writev = nand_writev; + mtd->writev_ecc = nand_writev_ecc; +#endif + mtd->sync = nand_sync; +/* XXX U-BOOT XXX */ +#if 0 + mtd->lock = NULL; + mtd->unlock = NULL; + mtd->suspend = NULL; + mtd->resume = NULL; +#endif + mtd->block_isbad = nand_block_isbad; + mtd->block_markbad = nand_block_markbad; + + /* and make the autooob the default one */ + memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo)); +/* XXX U-BOOT XXX */ +#if 0 + mtd->owner = THIS_MODULE; +#endif + /* Build bad block table */ + return this->scan_bbt (mtd); +} + +/** + * nand_release - [NAND Interface] Free resources held by the NAND device + * @mtd: MTD device structure + */ +void nand_release (struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + +#ifdef CONFIG_MTD_PARTITIONS + /* Deregister partitions */ + del_mtd_partitions (mtd); +#endif + /* Deregister the device */ +/* XXX U-BOOT XXX */ +#if 0 + del_mtd_device (mtd); +#endif + /* Free bad block table memory, if allocated */ + if (this->bbt) + kfree (this->bbt); + /* Buffer allocated by nand_scan ? */ + if (this->options & NAND_OOBBUF_ALLOC) + kfree (this->oob_buf); + /* Buffer allocated by nand_scan ? */ + if (this->options & NAND_DATABUF_ALLOC) + kfree (this->data_buf); +} + diff --git a/drivers/nand/nand_bbt.c b/drivers/nand/nand_bbt.c new file mode 100644 index 000000000..faffbae8f --- /dev/null +++ b/drivers/nand/nand_bbt.c @@ -0,0 +1,1048 @@ +/* + * drivers/mtd/nand_bbt.c + * + * Overview: + * Bad block table support for the NAND driver + * + * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de) + * + * $Id: nand_bbt.c,v 1.28 2004/11/13 10:19:09 gleixner Exp $ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Description: + * + * When nand_scan_bbt is called, then it tries to find the bad block table + * depending on the options in the bbt descriptor(s). If a bbt is found + * then the contents are read and the memory based bbt is created. If a + * mirrored bbt is selected then the mirror is searched too and the + * versions are compared. If the mirror has a greater version number + * than the mirror bbt is used to build the memory based bbt. + * If the tables are not versioned, then we "or" the bad block information. + * If one of the bbt's is out of date or does not exist it is (re)created. + * If no bbt exists at all then the device is scanned for factory marked + * good / bad blocks and the bad block tables are created. + * + * For manufacturer created bbts like the one found on M-SYS DOC devices + * the bbt is searched and read but never created + * + * The autogenerated bad block table is located in the last good blocks + * of the device. The table is mirrored, so it can be updated eventually. + * The table is marked in the oob area with an ident pattern and a version + * number which indicates which of both tables is more up to date. + * + * The table uses 2 bits per block + * 11b: block is good + * 00b: block is factory marked bad + * 01b, 10b: block is marked bad due to wear + * + * The memory bad block table uses the following scheme: + * 00b: block is good + * 01b: block is marked bad due to wear + * 10b: block is reserved (to protect the bbt area) + * 11b: block is factory marked bad + * + * Multichip devices like DOC store the bad block info per floor. + * + * Following assumptions are made: + * - bbts start at a page boundary, if autolocated on a block boundary + * - the space neccecary for a bbt in FLASH does not exceed a block boundary + * + */ + +#include +#include +#include +#include +#include + +#include + +/** + * check_pattern - [GENERIC] check if a pattern is in the buffer + * @buf: the buffer to search + * @len: the length of buffer to search + * @paglen: the pagelength + * @td: search pattern descriptor + * + * Check for a pattern at the given place. Used to search bad block + * tables and good / bad block identifiers. + * If the SCAN_EMPTY option is set then check, if all bytes except the + * pattern area contain 0xff + * +*/ +static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td) +{ + int i, end; + uint8_t *p = buf; + + end = paglen + td->offs; + if (td->options & NAND_BBT_SCANEMPTY) { + for (i = 0; i < end; i++) { + if (p[i] != 0xff) + return -1; + } + } + p += end; + + /* Compare the pattern */ + for (i = 0; i < td->len; i++) { + if (p[i] != td->pattern[i]) + return -1; + } + + p += td->len; + end += td->len; + if (td->options & NAND_BBT_SCANEMPTY) { + for (i = end; i < len; i++) { + if (*p++ != 0xff) + return -1; + } + } + return 0; +} + +/** + * read_bbt - [GENERIC] Read the bad block table starting from page + * @mtd: MTD device structure + * @buf: temporary buffer + * @page: the starting page + * @num: the number of bbt descriptors to read + * @bits: number of bits per block + * @offs: offset in the memory table + * @reserved_block_code: Pattern to identify reserved blocks + * + * Read the bad block table starting from page. + * + */ +static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num, + int bits, int offs, int reserved_block_code) +{ + int res, i, j, act = 0; + struct nand_chip *this = mtd->priv; + size_t retlen, len, totlen; + loff_t from; + uint8_t msk = (uint8_t) ((1 << bits) - 1); + + totlen = (num * bits) >> 3; + from = ((loff_t)page) << this->page_shift; + + while (totlen) { + len = min (totlen, (size_t) (1 << this->bbt_erase_shift)); + res = mtd->read_ecc (mtd, from, len, &retlen, buf, NULL, this->autooob); + if (res < 0) { + if (retlen != len) { + printk (KERN_INFO "nand_bbt: Error reading bad block table\n"); + return res; + } + printk (KERN_WARNING "nand_bbt: ECC error while reading bad block table\n"); + } + + /* Analyse data */ + for (i = 0; i < len; i++) { + uint8_t dat = buf[i]; + for (j = 0; j < 8; j += bits, act += 2) { + uint8_t tmp = (dat >> j) & msk; + if (tmp == msk) + continue; + if (reserved_block_code && + (tmp == reserved_block_code)) { + printk (KERN_DEBUG "nand_read_bbt: Reserved block at 0x%08x\n", + ((offs << 2) + (act >> 1)) << this->bbt_erase_shift); + this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06); + continue; + } + /* Leave it for now, if its matured we can move this + * message to MTD_DEBUG_LEVEL0 */ + printk (KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n", + ((offs << 2) + (act >> 1)) << this->bbt_erase_shift); + /* Factory marked bad or worn out ? */ + if (tmp == 0) + this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06); + else + this->bbt[offs + (act >> 3)] |= 0x1 << (act & 0x06); + } + } + totlen -= len; + from += len; + } + return 0; +} + +/** + * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page + * @mtd: MTD device structure + * @buf: temporary buffer + * @td: descriptor for the bad block table + * @chip: read the table for a specific chip, -1 read all chips. + * Applies only if NAND_BBT_PERCHIP option is set + * + * Read the bad block table for all chips starting at a given page + * We assume that the bbt bits are in consecutive order. +*/ +static int read_abs_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip) +{ + struct nand_chip *this = mtd->priv; + int res = 0, i; + int bits; + + bits = td->options & NAND_BBT_NRBITS_MSK; + if (td->options & NAND_BBT_PERCHIP) { + int offs = 0; + for (i = 0; i < this->numchips; i++) { + if (chip == -1 || chip == i) + res = read_bbt (mtd, buf, td->pages[i], this->chipsize >> this->bbt_erase_shift, bits, offs, td->reserved_block_code); + if (res) + return res; + offs += this->chipsize >> (this->bbt_erase_shift + 2); + } + } else { + res = read_bbt (mtd, buf, td->pages[0], mtd->size >> this->bbt_erase_shift, bits, 0, td->reserved_block_code); + if (res) + return res; + } + return 0; +} + +/** + * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page + * @mtd: MTD device structure + * @buf: temporary buffer + * @td: descriptor for the bad block table + * @md: descriptor for the bad block table mirror + * + * Read the bad block table(s) for all chips starting at a given page + * We assume that the bbt bits are in consecutive order. + * +*/ +static int read_abs_bbts (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, + struct nand_bbt_descr *md) +{ + struct nand_chip *this = mtd->priv; + + /* Read the primary version, if available */ + if (td->options & NAND_BBT_VERSION) { + nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); + td->version[0] = buf[mtd->oobblock + td->veroffs]; + printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", td->pages[0], td->version[0]); + } + + /* Read the mirror version, if available */ + if (md && (md->options & NAND_BBT_VERSION)) { + nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); + md->version[0] = buf[mtd->oobblock + md->veroffs]; + printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", md->pages[0], md->version[0]); + } + + return 1; +} + +/** + * create_bbt - [GENERIC] Create a bad block table by scanning the device + * @mtd: MTD device structure + * @buf: temporary buffer + * @bd: descriptor for the good/bad block search pattern + * @chip: create the table for a specific chip, -1 read all chips. + * Applies only if NAND_BBT_PERCHIP option is set + * + * Create a bad block table by scanning the device + * for the given good/bad block identify pattern + */ +static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip) +{ + struct nand_chip *this = mtd->priv; + int i, j, numblocks, len, scanlen; + int startblock; + loff_t from; + size_t readlen, ooblen; + + if (bd->options & NAND_BBT_SCANALLPAGES) + len = 1 << (this->bbt_erase_shift - this->page_shift); + else { + if (bd->options & NAND_BBT_SCAN2NDPAGE) + len = 2; + else + len = 1; + } + scanlen = mtd->oobblock + mtd->oobsize; + readlen = len * mtd->oobblock; + ooblen = len * mtd->oobsize; + + if (chip == -1) { + /* Note that numblocks is 2 * (real numblocks) here, see i+=2 below as it + * makes shifting and masking less painful */ + numblocks = mtd->size >> (this->bbt_erase_shift - 1); + startblock = 0; + from = 0; + } else { + if (chip >= this->numchips) { + printk (KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n", + chip + 1, this->numchips); + return; + } + numblocks = this->chipsize >> (this->bbt_erase_shift - 1); + startblock = chip * numblocks; + numblocks += startblock; + from = startblock << (this->bbt_erase_shift - 1); + } + + for (i = startblock; i < numblocks;) { + nand_read_raw (mtd, buf, from, readlen, ooblen); + for (j = 0; j < len; j++) { + if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) { + this->bbt[i >> 3] |= 0x03 << (i & 0x6); + break; + } + } + i += 2; + from += (1 << this->bbt_erase_shift); + } +} + +/** + * search_bbt - [GENERIC] scan the device for a specific bad block table + * @mtd: MTD device structure + * @buf: temporary buffer + * @td: descriptor for the bad block table + * + * Read the bad block table by searching for a given ident pattern. + * Search is preformed either from the beginning up or from the end of + * the device downwards. The search starts always at the start of a + * block. + * If the option NAND_BBT_PERCHIP is given, each chip is searched + * for a bbt, which contains the bad block information of this chip. + * This is neccecary to provide support for certain DOC devices. + * + * The bbt ident pattern resides in the oob area of the first page + * in a block. + */ +static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td) +{ + struct nand_chip *this = mtd->priv; + int i, chips; + int bits, startblock, block, dir; + int scanlen = mtd->oobblock + mtd->oobsize; + int bbtblocks; + + /* Search direction top -> down ? */ + if (td->options & NAND_BBT_LASTBLOCK) { + startblock = (mtd->size >> this->bbt_erase_shift) -1; + dir = -1; + } else { + startblock = 0; + dir = 1; + } + + /* Do we have a bbt per chip ? */ + if (td->options & NAND_BBT_PERCHIP) { + chips = this->numchips; + bbtblocks = this->chipsize >> this->bbt_erase_shift; + startblock &= bbtblocks - 1; + } else { + chips = 1; + bbtblocks = mtd->size >> this->bbt_erase_shift; + } + + /* Number of bits for each erase block in the bbt */ + bits = td->options & NAND_BBT_NRBITS_MSK; + + for (i = 0; i < chips; i++) { + /* Reset version information */ + td->version[i] = 0; + td->pages[i] = -1; + /* Scan the maximum number of blocks */ + for (block = 0; block < td->maxblocks; block++) { + int actblock = startblock + dir * block; + /* Read first page */ + nand_read_raw (mtd, buf, actblock << this->bbt_erase_shift, mtd->oobblock, mtd->oobsize); + if (!check_pattern(buf, scanlen, mtd->oobblock, td)) { + td->pages[i] = actblock << (this->bbt_erase_shift - this->page_shift); + if (td->options & NAND_BBT_VERSION) { + td->version[i] = buf[mtd->oobblock + td->veroffs]; + } + break; + } + } + startblock += this->chipsize >> this->bbt_erase_shift; + } + /* Check, if we found a bbt for each requested chip */ + for (i = 0; i < chips; i++) { + if (td->pages[i] == -1) + printk (KERN_WARNING "Bad block table not found for chip %d\n", i); + else + printk (KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i], td->version[i]); + } + return 0; +} + +/** + * search_read_bbts - [GENERIC] scan the device for bad block table(s) + * @mtd: MTD device structure + * @buf: temporary buffer + * @td: descriptor for the bad block table + * @md: descriptor for the bad block table mirror + * + * Search and read the bad block table(s) +*/ +static int search_read_bbts (struct mtd_info *mtd, uint8_t *buf, + struct nand_bbt_descr *td, struct nand_bbt_descr *md) +{ + /* Search the primary table */ + search_bbt (mtd, buf, td); + + /* Search the mirror table */ + if (md) + search_bbt (mtd, buf, md); + + /* Force result check */ + return 1; +} + + +/** + * write_bbt - [GENERIC] (Re)write the bad block table + * + * @mtd: MTD device structure + * @buf: temporary buffer + * @td: descriptor for the bad block table + * @md: descriptor for the bad block table mirror + * @chipsel: selector for a specific chip, -1 for all + * + * (Re)write the bad block table + * +*/ +static int write_bbt (struct mtd_info *mtd, uint8_t *buf, + struct nand_bbt_descr *td, struct nand_bbt_descr *md, int chipsel) +{ + struct nand_chip *this = mtd->priv; + struct nand_oobinfo oobinfo; + struct erase_info einfo; + int i, j, res, chip = 0; + int bits, startblock, dir, page, offs, numblocks, sft, sftmsk; + int nrchips, bbtoffs, pageoffs; + uint8_t msk[4]; + uint8_t rcode = td->reserved_block_code; + size_t retlen, len = 0; + loff_t to; + + if (!rcode) + rcode = 0xff; + /* Write bad block table per chip rather than per device ? */ + if (td->options & NAND_BBT_PERCHIP) { + numblocks = (int) (this->chipsize >> this->bbt_erase_shift); + /* Full device write or specific chip ? */ + if (chipsel == -1) { + nrchips = this->numchips; + } else { + nrchips = chipsel + 1; + chip = chipsel; + } + } else { + numblocks = (int) (mtd->size >> this->bbt_erase_shift); + nrchips = 1; + } + + /* Loop through the chips */ + for (; chip < nrchips; chip++) { + + /* There was already a version of the table, reuse the page + * This applies for absolute placement too, as we have the + * page nr. in td->pages. + */ + if (td->pages[chip] != -1) { + page = td->pages[chip]; + goto write; + } + + /* Automatic placement of the bad block table */ + /* Search direction top -> down ? */ + if (td->options & NAND_BBT_LASTBLOCK) { + startblock = numblocks * (chip + 1) - 1; + dir = -1; + } else { + startblock = chip * numblocks; + dir = 1; + } + + for (i = 0; i < td->maxblocks; i++) { + int block = startblock + dir * i; + /* Check, if the block is bad */ + switch ((this->bbt[block >> 2] >> (2 * (block & 0x03))) & 0x03) { + case 0x01: + case 0x03: + continue; + } + page = block << (this->bbt_erase_shift - this->page_shift); + /* Check, if the block is used by the mirror table */ + if (!md || md->pages[chip] != page) + goto write; + } + printk (KERN_ERR "No space left to write bad block table\n"); + return -ENOSPC; +write: + + /* Set up shift count and masks for the flash table */ + bits = td->options & NAND_BBT_NRBITS_MSK; + switch (bits) { + case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x01; break; + case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x03; break; + case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C; msk[2] = ~rcode; msk[3] = 0x0f; break; + case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F; msk[2] = ~rcode; msk[3] = 0xff; break; + default: return -EINVAL; + } + + bbtoffs = chip * (numblocks >> 2); + + to = ((loff_t) page) << this->page_shift; + + memcpy (&oobinfo, this->autooob, sizeof(oobinfo)); + oobinfo.useecc = MTD_NANDECC_PLACEONLY; + + /* Must we save the block contents ? */ + if (td->options & NAND_BBT_SAVECONTENT) { + /* Make it block aligned */ + to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1)); + len = 1 << this->bbt_erase_shift; + res = mtd->read_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo); + if (res < 0) { + if (retlen != len) { + printk (KERN_INFO "nand_bbt: Error reading block for writing the bad block table\n"); + return res; + } + printk (KERN_WARNING "nand_bbt: ECC error while reading block for writing bad block table\n"); + } + /* Calc the byte offset in the buffer */ + pageoffs = page - (int)(to >> this->page_shift); + offs = pageoffs << this->page_shift; + /* Preset the bbt area with 0xff */ + memset (&buf[offs], 0xff, (size_t)(numblocks >> sft)); + /* Preset the bbt's oob area with 0xff */ + memset (&buf[len + pageoffs * mtd->oobsize], 0xff, + ((len >> this->page_shift) - pageoffs) * mtd->oobsize); + if (td->options & NAND_BBT_VERSION) { + buf[len + (pageoffs * mtd->oobsize) + td->veroffs] = td->version[chip]; + } + } else { + /* Calc length */ + len = (size_t) (numblocks >> sft); + /* Make it page aligned ! */ + len = (len + (mtd->oobblock-1)) & ~(mtd->oobblock-1); + /* Preset the buffer with 0xff */ + memset (buf, 0xff, len + (len >> this->page_shift) * mtd->oobsize); + offs = 0; + /* Pattern is located in oob area of first page */ + memcpy (&buf[len + td->offs], td->pattern, td->len); + if (td->options & NAND_BBT_VERSION) { + buf[len + td->veroffs] = td->version[chip]; + } + } + + /* walk through the memory table */ + for (i = 0; i < numblocks; ) { + uint8_t dat; + dat = this->bbt[bbtoffs + (i >> 2)]; + for (j = 0; j < 4; j++ , i++) { + int sftcnt = (i << (3 - sft)) & sftmsk; + /* Do not store the reserved bbt blocks ! */ + buf[offs + (i >> sft)] &= ~(msk[dat & 0x03] << sftcnt); + dat >>= 2; + } + } + + memset (&einfo, 0, sizeof (einfo)); + einfo.mtd = mtd; + einfo.addr = (unsigned long) to; + einfo.len = 1 << this->bbt_erase_shift; + res = nand_erase_nand (mtd, &einfo, 1); + if (res < 0) { + printk (KERN_WARNING "nand_bbt: Error during block erase: %d\n", res); + return res; + } + + res = mtd->write_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo); + if (res < 0) { + printk (KERN_WARNING "nand_bbt: Error while writing bad block table %d\n", res); + return res; + } + printk (KERN_DEBUG "Bad block table written to 0x%08x, version 0x%02X\n", + (unsigned int) to, td->version[chip]); + + /* Mark it as used */ + td->pages[chip] = page; + } + return 0; +} + +/** + * nand_memory_bbt - [GENERIC] create a memory based bad block table + * @mtd: MTD device structure + * @bd: descriptor for the good/bad block search pattern + * + * The function creates a memory based bbt by scanning the device + * for manufacturer / software marked good / bad blocks +*/ +static int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd) +{ + struct nand_chip *this = mtd->priv; + + /* Ensure that we only scan for the pattern and nothing else */ + bd->options = 0; + create_bbt (mtd, this->data_buf, bd, -1); + return 0; +} + +/** + * check_create - [GENERIC] create and write bbt(s) if neccecary + * @mtd: MTD device structure + * @buf: temporary buffer + * @bd: descriptor for the good/bad block search pattern + * + * The function checks the results of the previous call to read_bbt + * and creates / updates the bbt(s) if neccecary + * Creation is neccecary if no bbt was found for the chip/device + * Update is neccecary if one of the tables is missing or the + * version nr. of one table is less than the other +*/ +static int check_create (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd) +{ + int i, chips, writeops, chipsel, res; + struct nand_chip *this = mtd->priv; + struct nand_bbt_descr *td = this->bbt_td; + struct nand_bbt_descr *md = this->bbt_md; + struct nand_bbt_descr *rd, *rd2; + + /* Do we have a bbt per chip ? */ + if (td->options & NAND_BBT_PERCHIP) + chips = this->numchips; + else + chips = 1; + + for (i = 0; i < chips; i++) { + writeops = 0; + rd = NULL; + rd2 = NULL; + /* Per chip or per device ? */ + chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1; + /* Mirrored table avilable ? */ + if (md) { + if (td->pages[i] == -1 && md->pages[i] == -1) { + writeops = 0x03; + goto create; + } + + if (td->pages[i] == -1) { + rd = md; + td->version[i] = md->version[i]; + writeops = 1; + goto writecheck; + } + + if (md->pages[i] == -1) { + rd = td; + md->version[i] = td->version[i]; + writeops = 2; + goto writecheck; + } + + if (td->version[i] == md->version[i]) { + rd = td; + if (!(td->options & NAND_BBT_VERSION)) + rd2 = md; + goto writecheck; + } + + if (((int8_t) (td->version[i] - md->version[i])) > 0) { + rd = td; + md->version[i] = td->version[i]; + writeops = 2; + } else { + rd = md; + td->version[i] = md->version[i]; + writeops = 1; + } + + goto writecheck; + + } else { + if (td->pages[i] == -1) { + writeops = 0x01; + goto create; + } + rd = td; + goto writecheck; + } +create: + /* Create the bad block table by scanning the device ? */ + if (!(td->options & NAND_BBT_CREATE)) + continue; + + /* Create the table in memory by scanning the chip(s) */ + create_bbt (mtd, buf, bd, chipsel); + + td->version[i] = 1; + if (md) + md->version[i] = 1; +writecheck: + /* read back first ? */ + if (rd) + read_abs_bbt (mtd, buf, rd, chipsel); + /* If they weren't versioned, read both. */ + if (rd2) + read_abs_bbt (mtd, buf, rd2, chipsel); + + /* Write the bad block table to the device ? */ + if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) { + res = write_bbt (mtd, buf, td, md, chipsel); + if (res < 0) + return res; + } + + /* Write the mirror bad block table to the device ? */ + if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) { + res = write_bbt (mtd, buf, md, td, chipsel); + if (res < 0) + return res; + } + } + return 0; +} + +/** + * mark_bbt_regions - [GENERIC] mark the bad block table regions + * @mtd: MTD device structure + * @td: bad block table descriptor + * + * The bad block table regions are marked as "bad" to prevent + * accidental erasures / writes. The regions are identified by + * the mark 0x02. +*/ +static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td) +{ + struct nand_chip *this = mtd->priv; + int i, j, chips, block, nrblocks, update; + uint8_t oldval, newval; + + /* Do we have a bbt per chip ? */ + if (td->options & NAND_BBT_PERCHIP) { + chips = this->numchips; + nrblocks = (int)(this->chipsize >> this->bbt_erase_shift); + } else { + chips = 1; + nrblocks = (int)(mtd->size >> this->bbt_erase_shift); + } + + for (i = 0; i < chips; i++) { + if ((td->options & NAND_BBT_ABSPAGE) || + !(td->options & NAND_BBT_WRITE)) { + if (td->pages[i] == -1) continue; + block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift); + block <<= 1; + oldval = this->bbt[(block >> 3)]; + newval = oldval | (0x2 << (block & 0x06)); + this->bbt[(block >> 3)] = newval; + if ((oldval != newval) && td->reserved_block_code) + nand_update_bbt(mtd, block << (this->bbt_erase_shift - 1)); + continue; + } + update = 0; + if (td->options & NAND_BBT_LASTBLOCK) + block = ((i + 1) * nrblocks) - td->maxblocks; + else + block = i * nrblocks; + block <<= 1; + for (j = 0; j < td->maxblocks; j++) { + oldval = this->bbt[(block >> 3)]; + newval = oldval | (0x2 << (block & 0x06)); + this->bbt[(block >> 3)] = newval; + if (oldval != newval) update = 1; + block += 2; + } + /* If we want reserved blocks to be recorded to flash, and some + new ones have been marked, then we need to update the stored + bbts. This should only happen once. */ + if (update && td->reserved_block_code) + nand_update_bbt(mtd, (block - 2) << (this->bbt_erase_shift - 1)); + } +} + +/** + * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s) + * @mtd: MTD device structure + * @bd: descriptor for the good/bad block search pattern + * + * The function checks, if a bad block table(s) is/are already + * available. If not it scans the device for manufacturer + * marked good / bad blocks and writes the bad block table(s) to + * the selected place. + * + * The bad block table memory is allocated here. It must be freed + * by calling the nand_free_bbt function. + * +*/ +int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd) +{ + struct nand_chip *this = mtd->priv; + int len, res = 0; + uint8_t *buf; + struct nand_bbt_descr *td = this->bbt_td; + struct nand_bbt_descr *md = this->bbt_md; + + len = mtd->size >> (this->bbt_erase_shift + 2); + /* Allocate memory (2bit per block) */ + this->bbt = kmalloc (len, GFP_KERNEL); + if (!this->bbt) { + printk (KERN_ERR "nand_scan_bbt: Out of memory\n"); + return -ENOMEM; + } + /* Clear the memory bad block table */ + memset (this->bbt, 0x00, len); + + /* If no primary table decriptor is given, scan the device + * to build a memory based bad block table + */ + if (!td) + return nand_memory_bbt(mtd, bd); + + /* Allocate a temporary buffer for one eraseblock incl. oob */ + len = (1 << this->bbt_erase_shift); + len += (len >> this->page_shift) * mtd->oobsize; + buf = kmalloc (len, GFP_KERNEL); + if (!buf) { + printk (KERN_ERR "nand_bbt: Out of memory\n"); + kfree (this->bbt); + this->bbt = NULL; + return -ENOMEM; + } + + /* Is the bbt at a given page ? */ + if (td->options & NAND_BBT_ABSPAGE) { + res = read_abs_bbts (mtd, buf, td, md); + } else { + /* Search the bad block table using a pattern in oob */ + res = search_read_bbts (mtd, buf, td, md); + } + + if (res) + res = check_create (mtd, buf, bd); + + /* Prevent the bbt regions from erasing / writing */ + mark_bbt_region (mtd, td); + if (md) + mark_bbt_region (mtd, md); + + kfree (buf); + return res; +} + + +/** + * nand_update_bbt - [NAND Interface] update bad block table(s) + * @mtd: MTD device structure + * @offs: the offset of the newly marked block + * + * The function updates the bad block table(s) +*/ +int nand_update_bbt (struct mtd_info *mtd, loff_t offs) +{ + struct nand_chip *this = mtd->priv; + int len, res = 0, writeops = 0; + int chip, chipsel; + uint8_t *buf; + struct nand_bbt_descr *td = this->bbt_td; + struct nand_bbt_descr *md = this->bbt_md; + + if (!this->bbt || !td) + return -EINVAL; + + len = mtd->size >> (this->bbt_erase_shift + 2); + /* Allocate a temporary buffer for one eraseblock incl. oob */ + len = (1 << this->bbt_erase_shift); + len += (len >> this->page_shift) * mtd->oobsize; + buf = kmalloc (len, GFP_KERNEL); + if (!buf) { + printk (KERN_ERR "nand_update_bbt: Out of memory\n"); + return -ENOMEM; + } + + writeops = md != NULL ? 0x03 : 0x01; + + /* Do we have a bbt per chip ? */ + if (td->options & NAND_BBT_PERCHIP) { + chip = (int) (offs >> this->chip_shift); + chipsel = chip; + } else { + chip = 0; + chipsel = -1; + } + + td->version[chip]++; + if (md) + md->version[chip]++; + + /* Write the bad block table to the device ? */ + if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) { + res = write_bbt (mtd, buf, td, md, chipsel); + if (res < 0) + goto out; + } + /* Write the mirror bad block table to the device ? */ + if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) { + res = write_bbt (mtd, buf, md, td, chipsel); + } + +out: + kfree (buf); + return res; +} + +/* Define some generic bad / good block scan pattern which are used + * while scanning a device for factory marked good / bad blocks + * + * The memory based patterns just + */ +static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; + +static struct nand_bbt_descr smallpage_memorybased = { + .options = 0, + .offs = 5, + .len = 1, + .pattern = scan_ff_pattern +}; + +static struct nand_bbt_descr largepage_memorybased = { + .options = 0, + .offs = 0, + .len = 2, + .pattern = scan_ff_pattern +}; + +static struct nand_bbt_descr smallpage_flashbased = { + .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES, + .offs = 5, + .len = 1, + .pattern = scan_ff_pattern +}; + +static struct nand_bbt_descr largepage_flashbased = { + .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES, + .offs = 0, + .len = 2, + .pattern = scan_ff_pattern +}; + +static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 }; + +static struct nand_bbt_descr agand_flashbased = { + .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES, + .offs = 0x20, + .len = 6, + .pattern = scan_agand_pattern +}; + +/* Generic flash bbt decriptors +*/ +static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' }; +static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' }; + +static struct nand_bbt_descr bbt_main_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, + .offs = 8, + .len = 4, + .veroffs = 12, + .maxblocks = 4, + .pattern = bbt_pattern +}; + +static struct nand_bbt_descr bbt_mirror_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, + .offs = 8, + .len = 4, + .veroffs = 12, + .maxblocks = 4, + .pattern = mirror_pattern +}; + +/** + * nand_default_bbt - [NAND Interface] Select a default bad block table for the device + * @mtd: MTD device structure + * + * This function selects the default bad block table + * support for the device and calls the nand_scan_bbt function + * +*/ +int nand_default_bbt (struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + + /* Default for AG-AND. We must use a flash based + * bad block table as the devices have factory marked + * _good_ blocks. Erasing those blocks leads to loss + * of the good / bad information, so we _must_ store + * this information in a good / bad table during + * startup + */ + if (this->options & NAND_IS_AND) { + /* Use the default pattern descriptors */ + if (!this->bbt_td) { + this->bbt_td = &bbt_main_descr; + this->bbt_md = &bbt_mirror_descr; + } + this->options |= NAND_USE_FLASH_BBT; + return nand_scan_bbt (mtd, &agand_flashbased); + } + + + /* Is a flash based bad block table requested ? */ + if (this->options & NAND_USE_FLASH_BBT) { + /* Use the default pattern descriptors */ + if (!this->bbt_td) { + this->bbt_td = &bbt_main_descr; + this->bbt_md = &bbt_mirror_descr; + } + if (!this->badblock_pattern) { + this->badblock_pattern = (mtd->oobblock > 512) ? + &largepage_flashbased : &smallpage_flashbased; + } + } else { + this->bbt_td = NULL; + this->bbt_md = NULL; + if (!this->badblock_pattern) { + this->badblock_pattern = (mtd->oobblock > 512) ? + &largepage_memorybased : &smallpage_memorybased; + } + } + return nand_scan_bbt (mtd, this->badblock_pattern); +} + +/** + * nand_isbad_bbt - [NAND Interface] Check if a block is bad + * @mtd: MTD device structure + * @offs: offset in the device + * @allowbbt: allow access to bad block table region + * + */ +int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt) +{ + struct nand_chip *this = mtd->priv; + int block; + uint8_t res; + + /* Get block number * 2 */ + block = (int) (offs >> (this->bbt_erase_shift - 1)); + res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03; + + DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n", + (unsigned int)offs, res, block >> 1); + + switch ((int)res) { + case 0x00: return 0; + case 0x01: return 1; + case 0x02: return allowbbt ? 0 : 1; + } + return 1; +} + diff --git a/drivers/nand/nand_ecc.c b/drivers/nand/nand_ecc.c new file mode 100644 index 000000000..9fca7b13d --- /dev/null +++ b/drivers/nand/nand_ecc.c @@ -0,0 +1,241 @@ +/* + * This file contains an ECC algorithm from Toshiba that detects and + * corrects 1 bit errors in a 256 byte block of data. + * + * drivers/mtd/nand/nand_ecc.c + * + * Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com) + * Toshiba America Electronics Components, Inc. + * + * $Id: nand_ecc.c,v 1.14 2004/06/16 15:34:37 gleixner Exp $ + * + * This file is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 or (at your option) any + * later version. + * + * This file is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this file; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * As a special exception, if other files instantiate templates or use + * macros or inline functions from these files, or you compile these + * files and link them with other works to produce a work based on these + * files, these files do not by themselves cause the resulting work to be + * covered by the GNU General Public License. However the source code for + * these files must still be made available in accordance with section (3) + * of the GNU General Public License. + * + * This exception does not invalidate any other reasons why a work based on + * this file might be covered by the GNU General Public License. + */ + +#include +#include + +/* + * Pre-calculated 256-way 1 byte column parity + */ +static const u_char nand_ecc_precalc_table[] = { + 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00, + 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65, + 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66, + 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03, + 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69, + 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c, + 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f, + 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a, + 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a, + 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f, + 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c, + 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69, + 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03, + 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66, + 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65, + 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00 +}; + + +/** + * nand_trans_result - [GENERIC] create non-inverted ECC + * @reg2: line parity reg 2 + * @reg3: line parity reg 3 + * @ecc_code: ecc + * + * Creates non-inverted ECC code from line parity + */ +static void nand_trans_result(u_char reg2, u_char reg3, + u_char *ecc_code) +{ + u_char a, b, i, tmp1, tmp2; + + /* Initialize variables */ + a = b = 0x80; + tmp1 = tmp2 = 0; + + /* Calculate first ECC byte */ + for (i = 0; i < 4; i++) { + if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */ + tmp1 |= b; + b >>= 1; + if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */ + tmp1 |= b; + b >>= 1; + a >>= 1; + } + + /* Calculate second ECC byte */ + b = 0x80; + for (i = 0; i < 4; i++) { + if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */ + tmp2 |= b; + b >>= 1; + if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */ + tmp2 |= b; + b >>= 1; + a >>= 1; + } + + /* Store two of the ECC bytes */ + ecc_code[0] = tmp1; + ecc_code[1] = tmp2; +} + +/** + * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code for 256 byte block + * @mtd: MTD block structure + * @dat: raw data + * @ecc_code: buffer for ECC + */ +int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) +{ + u_char idx, reg1, reg2, reg3; + int j; + + /* Initialize variables */ + reg1 = reg2 = reg3 = 0; + ecc_code[0] = ecc_code[1] = ecc_code[2] = 0; + + /* Build up column parity */ + for(j = 0; j < 256; j++) { + + /* Get CP0 - CP5 from table */ + idx = nand_ecc_precalc_table[dat[j]]; + reg1 ^= (idx & 0x3f); + + /* All bit XOR = 1 ? */ + if (idx & 0x40) { + reg3 ^= (u_char) j; + reg2 ^= ~((u_char) j); + } + } + + /* Create non-inverted ECC code from line parity */ + nand_trans_result(reg2, reg3, ecc_code); + + /* Calculate final ECC code */ + ecc_code[0] = ~ecc_code[0]; + ecc_code[1] = ~ecc_code[1]; + ecc_code[2] = ((~reg1) << 2) | 0x03; + return 0; +} + +/** + * nand_correct_data - [NAND Interface] Detect and correct bit error(s) + * @mtd: MTD block structure + * @dat: raw data read from the chip + * @read_ecc: ECC from the chip + * @calc_ecc: the ECC calculated from raw data + * + * Detect and correct a 1 bit error for 256 byte block + */ +int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) +{ + u_char a, b, c, d1, d2, d3, add, bit, i; + + /* Do error detection */ + d1 = calc_ecc[0] ^ read_ecc[0]; + d2 = calc_ecc[1] ^ read_ecc[1]; + d3 = calc_ecc[2] ^ read_ecc[2]; + + if ((d1 | d2 | d3) == 0) { + /* No errors */ + return 0; + } + else { + a = (d1 ^ (d1 >> 1)) & 0x55; + b = (d2 ^ (d2 >> 1)) & 0x55; + c = (d3 ^ (d3 >> 1)) & 0x54; + + /* Found and will correct single bit error in the data */ + if ((a == 0x55) && (b == 0x55) && (c == 0x54)) { + c = 0x80; + add = 0; + a = 0x80; + for (i=0; i<4; i++) { + if (d1 & c) + add |= a; + c >>= 2; + a >>= 1; + } + c = 0x80; + for (i=0; i<4; i++) { + if (d2 & c) + add |= a; + c >>= 2; + a >>= 1; + } + bit = 0; + b = 0x04; + c = 0x80; + for (i=0; i<3; i++) { + if (d3 & c) + bit |= b; + c >>= 2; + b >>= 1; + } + b = 0x01; + a = dat[add]; + a ^= (b << bit); + dat[add] = a; + return 1; + } else { + i = 0; + while (d1) { + if (d1 & 0x01) + ++i; + d1 >>= 1; + } + while (d2) { + if (d2 & 0x01) + ++i; + d2 >>= 1; + } + while (d3) { + if (d3 & 0x01) + ++i; + d3 >>= 1; + } + if (i == 1) { + /* ECC Code Error Correction */ + read_ecc[0] = calc_ecc[0]; + read_ecc[1] = calc_ecc[1]; + read_ecc[2] = calc_ecc[2]; + return 2; + } + else { + /* Uncorrectable Error */ + return -1; + } + } + } + + /* Should never happen */ + return -1; +} + diff --git a/drivers/nand/nand_ids.c b/drivers/nand/nand_ids.c new file mode 100644 index 000000000..8ebd04c16 --- /dev/null +++ b/drivers/nand/nand_ids.c @@ -0,0 +1,125 @@ +/* + * drivers/mtd/nandids.c + * + * Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de) + * + * $Id: nand_ids.c,v 1.10 2004/05/26 13:40:12 gleixner Exp $ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include + +/* +* Chip ID list +* +* Name. ID code, pagesize, chipsize in MegaByte, eraseblock size, +* options +* +* Pagesize; 0, 256, 512 +* 0 get this information from the extended chip ID ++ 256 256 Byte page size +* 512 512 Byte page size +*/ +struct nand_flash_dev nand_flash_ids[] = { + {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0}, + {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0}, + {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0}, + {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0}, + {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0}, + {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0}, + {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0}, + {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0}, + {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0}, + {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0}, + + {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0}, + {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0}, + {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16}, + {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16}, + + {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0}, + {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0}, + {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16}, + {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16}, + + {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0}, + {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0}, + {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16}, + {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16}, + + {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0}, + {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0}, + {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16}, + {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16}, + + {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0}, + {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0}, + {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16}, + {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16}, + + {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0}, + + {"NAND 512MiB 3,3V 8-bit", 0xDC, 512, 512, 0x4000, 0}, + + /* These are the new chips with large page size. The pagesize + * and the erasesize is determined from the extended id bytes + */ + /* 1 Gigabit */ + {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, + {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, + {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + + /* 2 Gigabit */ + {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, + {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, + {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + + /* 4 Gigabit */ + {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, + {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, + {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + + /* 8 Gigabit */ + {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, + {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, + {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + + /* 16 Gigabit */ + {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, + {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, + {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + + /* Renesas AND 1 Gigabit. Those chips do not support extended id and have a strange page/block layout ! + * The chosen minimum erasesize is 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page planes + * 1 block = 2 pages, but due to plane arrangement the blocks 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7 + * Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go + * There are more speed improvements for reads and writes possible, but not implemented now + */ + {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY}, + + {NULL,} +}; + +/* +* Manufacturer ID list +*/ +struct nand_manufacturers nand_manuf_ids[] = { + {NAND_MFR_TOSHIBA, "Toshiba"}, + {NAND_MFR_SAMSUNG, "Samsung"}, + {NAND_MFR_FUJITSU, "Fujitsu"}, + {NAND_MFR_NATIONAL, "National"}, + {NAND_MFR_RENESAS, "Renesas"}, + {NAND_MFR_STMICRO, "ST Micro"}, + {0x0, "Unknown"} +}; + diff --git a/drivers/nand/nand_util.c b/drivers/nand/nand_util.c new file mode 100644 index 000000000..610497b22 --- /dev/null +++ b/drivers/nand/nand_util.c @@ -0,0 +1,858 @@ +/* + * drivers/nand/nand_util.c + * + * Copyright (C) 2006 by Weiss-Electronic GmbH. + * All rights reserved. + * + * @author: Guido Classen + * @descr: NAND Flash support + * @references: borrowed heavily from Linux mtd-utils code: + * flash_eraseall.c by Arcom Control System Ltd + * nandwrite.c by Steven J. Hill (sjhill@realitydiluted.com) + * and Thomas Gleixner (tglx@linutronix.de) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include +#include +#include + +#include +#include + +typedef struct erase_info erase_info_t; +typedef struct mtd_info mtd_info_t; + +/* support only for native endian JFFS2 */ +#define cpu_to_je16(x) (x) +#define cpu_to_je32(x) (x) + +/*****************************************************************************/ +static int nand_block_bad_scrub(struct mtd_info *mtd, loff_t ofs, int getchip) +{ + return 0; +} + +/** + * nand_erase_opts: - erase NAND flash with support for various options + * (jffs2 formating) + * + * @param meminfo NAND device to erase + * @param opts options, @see struct nand_erase_options + * @return 0 in case of success + * + * This code is ported from flash_eraseall.c from Linux mtd utils by + * Arcom Control System Ltd. + */ +int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) +{ + struct jffs2_unknown_node cleanmarker; + int clmpos = 0; + int clmlen = 8; + erase_info_t erase; + ulong erase_length; + int isNAND; + int bbtest = 1; + int result; + int percent_complete = -1; + int (*nand_block_bad_old)(struct mtd_info *, loff_t, int) = NULL; + const char *mtd_device = meminfo->name; + + memset(&erase, 0, sizeof(erase)); + + erase.mtd = meminfo; + erase.len = meminfo->erasesize; + erase.addr = opts->offset; + erase_length = opts->length; + + isNAND = meminfo->type == MTD_NANDFLASH ? 1 : 0; + + if (opts->jffs2) { + cleanmarker.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK); + cleanmarker.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER); + if (isNAND) { + struct nand_oobinfo *oobinfo = &meminfo->oobinfo; + + /* check for autoplacement */ + if (oobinfo->useecc == MTD_NANDECC_AUTOPLACE) { + /* get the position of the free bytes */ + if (!oobinfo->oobfree[0][1]) { + printf(" Eeep. Autoplacement selected " + "and no empty space in oob\n"); + return -1; + } + clmpos = oobinfo->oobfree[0][0]; + clmlen = oobinfo->oobfree[0][1]; + if (clmlen > 8) + clmlen = 8; + } else { + /* legacy mode */ + switch (meminfo->oobsize) { + case 8: + clmpos = 6; + clmlen = 2; + break; + case 16: + clmpos = 8; + clmlen = 8; + break; + case 64: + clmpos = 16; + clmlen = 8; + break; + } + } + + cleanmarker.totlen = cpu_to_je32(8); + } else { + cleanmarker.totlen = + cpu_to_je32(sizeof(struct jffs2_unknown_node)); + } + cleanmarker.hdr_crc = cpu_to_je32( + crc32_no_comp(0, (unsigned char *) &cleanmarker, + sizeof(struct jffs2_unknown_node) - 4)); + } + + /* scrub option allows to erase badblock. To prevent internal + * check from erase() method, set block check method to dummy + * and disable bad block table while erasing. + */ + if (opts->scrub) { + struct nand_chip *priv_nand = meminfo->priv; + + nand_block_bad_old = priv_nand->block_bad; + priv_nand->block_bad = nand_block_bad_scrub; + /* we don't need the bad block table anymore... + * after scrub, there are no bad blocks left! + */ + if (priv_nand->bbt) { + kfree(priv_nand->bbt); + } + priv_nand->bbt = NULL; + } + + for (; + erase.addr < opts->offset + erase_length; + erase.addr += meminfo->erasesize) { + + WATCHDOG_RESET (); + + if (!opts->scrub && bbtest) { + int ret = meminfo->block_isbad(meminfo, erase.addr); + if (ret > 0) { + if (!opts->quiet) + printf("\rSkipping bad block at " + "0x%08x " + " \n", + erase.addr); + continue; + + } else if (ret < 0) { + printf("\n%s: MTD get bad block failed: %d\n", + mtd_device, + ret); + return -1; + } + } + + result = meminfo->erase(meminfo, &erase); + if (result != 0) { + printf("\n%s: MTD Erase failure: %d\n", + mtd_device, result); + continue; + } + + /* format for JFFS2 ? */ + if (opts->jffs2) { + + /* write cleanmarker */ + if (isNAND) { + size_t written; + result = meminfo->write_oob(meminfo, + erase.addr + clmpos, + clmlen, + &written, + (unsigned char *) + &cleanmarker); + if (result != 0) { + printf("\n%s: MTD writeoob failure: %d\n", + mtd_device, result); + continue; + } + } else { + printf("\n%s: this erase routine only supports" + " NAND devices!\n", + mtd_device); + } + } + + if (!opts->quiet) { + int percent = (int) + ((unsigned long long) + (erase.addr+meminfo->erasesize-opts->offset) + * 100 / erase_length); + + /* output progress message only at whole percent + * steps to reduce the number of messages printed + * on (slow) serial consoles + */ + if (percent != percent_complete) { + percent_complete = percent; + + printf("\rErasing at 0x%x -- %3d%% complete.", + erase.addr, percent); + + if (opts->jffs2 && result == 0) + printf(" Cleanmarker written at 0x%x.", + erase.addr); + } + } + } + if (!opts->quiet) + printf("\n"); + + if (nand_block_bad_old) { + struct nand_chip *priv_nand = meminfo->priv; + + priv_nand->block_bad = nand_block_bad_old; + priv_nand->scan_bbt(meminfo); + } + + return 0; +} + +#define MAX_PAGE_SIZE 2048 +#define MAX_OOB_SIZE 64 + +/* + * buffer array used for writing data + */ +static unsigned char data_buf[MAX_PAGE_SIZE]; +static unsigned char oob_buf[MAX_OOB_SIZE]; + +/* OOB layouts to pass into the kernel as default */ +static struct nand_oobinfo none_oobinfo = { + .useecc = MTD_NANDECC_OFF, +}; + +static struct nand_oobinfo jffs2_oobinfo = { + .useecc = MTD_NANDECC_PLACE, + .eccbytes = 6, + .eccpos = { 0, 1, 2, 3, 6, 7 } +}; + +static struct nand_oobinfo yaffs_oobinfo = { + .useecc = MTD_NANDECC_PLACE, + .eccbytes = 6, + .eccpos = { 8, 9, 10, 13, 14, 15} +}; + +static struct nand_oobinfo autoplace_oobinfo = { + .useecc = MTD_NANDECC_AUTOPLACE +}; + +/** + * nand_write_opts: - write image to NAND flash with support for various options + * + * @param meminfo NAND device to erase + * @param opts write options (@see nand_write_options) + * @return 0 in case of success + * + * This code is ported from nandwrite.c from Linux mtd utils by + * Steven J. Hill and Thomas Gleixner. + */ +int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts) +{ + int imglen = 0; + int pagelen; + int baderaseblock; + int blockstart = -1; + loff_t offs; + int readlen; + int oobinfochanged = 0; + int percent_complete = -1; + struct nand_oobinfo old_oobinfo; + ulong mtdoffset = opts->offset; + ulong erasesize_blockalign; + u_char *buffer = opts->buffer; + size_t written; + int result; + + if (opts->pad && opts->writeoob) { + printf("Can't pad when oob data is present.\n"); + return -1; + } + + /* set erasesize to specified number of blocks - to match + * jffs2 (virtual) block size */ + if (opts->blockalign == 0) { + erasesize_blockalign = meminfo->erasesize; + } else { + erasesize_blockalign = meminfo->erasesize * opts->blockalign; + } + + /* make sure device page sizes are valid */ + if (!(meminfo->oobsize == 16 && meminfo->oobblock == 512) + && !(meminfo->oobsize == 8 && meminfo->oobblock == 256) + && !(meminfo->oobsize == 64 && meminfo->oobblock == 2048)) { + printf("Unknown flash (not normal NAND)\n"); + return -1; + } + + /* read the current oob info */ + memcpy(&old_oobinfo, &meminfo->oobinfo, sizeof(old_oobinfo)); + + /* write without ecc? */ + if (opts->noecc) { + memcpy(&meminfo->oobinfo, &none_oobinfo, + sizeof(meminfo->oobinfo)); + oobinfochanged = 1; + } + + /* autoplace ECC? */ + if (opts->autoplace && (old_oobinfo.useecc != MTD_NANDECC_AUTOPLACE)) { + + memcpy(&meminfo->oobinfo, &autoplace_oobinfo, + sizeof(meminfo->oobinfo)); + oobinfochanged = 1; + } + + /* force OOB layout for jffs2 or yaffs? */ + if (opts->forcejffs2 || opts->forceyaffs) { + struct nand_oobinfo *oobsel = + opts->forcejffs2 ? &jffs2_oobinfo : &yaffs_oobinfo; + + if (meminfo->oobsize == 8) { + if (opts->forceyaffs) { + printf("YAFSS cannot operate on " + "256 Byte page size\n"); + goto restoreoob; + } + /* Adjust number of ecc bytes */ + jffs2_oobinfo.eccbytes = 3; + } + + memcpy(&meminfo->oobinfo, oobsel, sizeof(meminfo->oobinfo)); + } + + /* get image length */ + imglen = opts->length; + pagelen = meminfo->oobblock + + ((opts->writeoob != 0) ? meminfo->oobsize : 0); + + /* check, if file is pagealigned */ + if ((!opts->pad) && ((imglen % pagelen) != 0)) { + printf("Input block length is not page aligned\n"); + goto restoreoob; + } + + /* check, if length fits into device */ + if (((imglen / pagelen) * meminfo->oobblock) + > (meminfo->size - opts->offset)) { + printf("Image %d bytes, NAND page %d bytes, " + "OOB area %u bytes, device size %u bytes\n", + imglen, pagelen, meminfo->oobblock, meminfo->size); + printf("Input block does not fit into device\n"); + goto restoreoob; + } + + if (!opts->quiet) + printf("\n"); + + /* get data from input and write to the device */ + while (imglen && (mtdoffset < meminfo->size)) { + + WATCHDOG_RESET (); + + /* + * new eraseblock, check for bad block(s). Stay in the + * loop to be sure if the offset changes because of + * a bad block, that the next block that will be + * written to is also checked. Thus avoiding errors if + * the block(s) after the skipped block(s) is also bad + * (number of blocks depending on the blockalign + */ + while (blockstart != (mtdoffset & (~erasesize_blockalign+1))) { + blockstart = mtdoffset & (~erasesize_blockalign+1); + offs = blockstart; + baderaseblock = 0; + + /* check all the blocks in an erase block for + * bad blocks */ + do { + int ret = meminfo->block_isbad(meminfo, offs); + + if (ret < 0) { + printf("Bad block check failed\n"); + goto restoreoob; + } + if (ret == 1) { + baderaseblock = 1; + if (!opts->quiet) + printf("\rBad block at 0x%lx " + "in erase block from " + "0x%x will be skipped\n", + (long) offs, + blockstart); + } + + if (baderaseblock) { + mtdoffset = blockstart + + erasesize_blockalign; + } + offs += erasesize_blockalign + / opts->blockalign; + } while (offs < blockstart + erasesize_blockalign); + } + + readlen = meminfo->oobblock; + if (opts->pad && (imglen < readlen)) { + readlen = imglen; + memset(data_buf + readlen, 0xff, + meminfo->oobblock - readlen); + } + + /* read page data from input memory buffer */ + memcpy(data_buf, buffer, readlen); + buffer += readlen; + + if (opts->writeoob) { + /* read OOB data from input memory block, exit + * on failure */ + memcpy(oob_buf, buffer, meminfo->oobsize); + buffer += meminfo->oobsize; + + /* write OOB data first, as ecc will be placed + * in there*/ + result = meminfo->write_oob(meminfo, + mtdoffset, + meminfo->oobsize, + &written, + (unsigned char *) + &oob_buf); + + if (result != 0) { + printf("\nMTD writeoob failure: %d\n", + result); + goto restoreoob; + } + imglen -= meminfo->oobsize; + } + + /* write out the page data */ + result = meminfo->write(meminfo, + mtdoffset, + meminfo->oobblock, + &written, + (unsigned char *) &data_buf); + + if (result != 0) { + printf("writing NAND page at offset 0x%lx failed\n", + mtdoffset); + goto restoreoob; + } + imglen -= readlen; + + if (!opts->quiet) { + int percent = (int) + ((unsigned long long) + (opts->length-imglen) * 100 + / opts->length); + /* output progress message only at whole percent + * steps to reduce the number of messages printed + * on (slow) serial consoles + */ + if (percent != percent_complete) { + printf("\rWriting data at 0x%x " + "-- %3d%% complete.", + mtdoffset, percent); + percent_complete = percent; + } + } + + mtdoffset += meminfo->oobblock; + } + + if (!opts->quiet) + printf("\n"); + +restoreoob: + if (oobinfochanged) { + memcpy(&meminfo->oobinfo, &old_oobinfo, + sizeof(meminfo->oobinfo)); + } + + if (imglen > 0) { + printf("Data did not fit into device, due to bad blocks\n"); + return -1; + } + + /* return happy */ + return 0; +} + +/** + * nand_read_opts: - read image from NAND flash with support for various options + * + * @param meminfo NAND device to erase + * @param opts read options (@see struct nand_read_options) + * @return 0 in case of success + * + */ +int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts) +{ + int imglen = opts->length; + int pagelen; + int baderaseblock; + int blockstart = -1; + int percent_complete = -1; + loff_t offs; + size_t readlen; + ulong mtdoffset = opts->offset; + u_char *buffer = opts->buffer; + int result; + + /* make sure device page sizes are valid */ + if (!(meminfo->oobsize == 16 && meminfo->oobblock == 512) + && !(meminfo->oobsize == 8 && meminfo->oobblock == 256) + && !(meminfo->oobsize == 64 && meminfo->oobblock == 2048)) { + printf("Unknown flash (not normal NAND)\n"); + return -1; + } + + pagelen = meminfo->oobblock + + ((opts->readoob != 0) ? meminfo->oobsize : 0); + + /* check, if length is not larger than device */ + if (((imglen / pagelen) * meminfo->oobblock) + > (meminfo->size - opts->offset)) { + printf("Image %d bytes, NAND page %d bytes, " + "OOB area %u bytes, device size %u bytes\n", + imglen, pagelen, meminfo->oobblock, meminfo->size); + printf("Input block is larger than device\n"); + return -1; + } + + if (!opts->quiet) + printf("\n"); + + /* get data from input and write to the device */ + while (imglen && (mtdoffset < meminfo->size)) { + + WATCHDOG_RESET (); + + /* + * new eraseblock, check for bad block(s). Stay in the + * loop to be sure if the offset changes because of + * a bad block, that the next block that will be + * written to is also checked. Thus avoiding errors if + * the block(s) after the skipped block(s) is also bad + * (number of blocks depending on the blockalign + */ + while (blockstart != (mtdoffset & (~meminfo->erasesize+1))) { + blockstart = mtdoffset & (~meminfo->erasesize+1); + offs = blockstart; + baderaseblock = 0; + + /* check all the blocks in an erase block for + * bad blocks */ + do { + int ret = meminfo->block_isbad(meminfo, offs); + + if (ret < 0) { + printf("Bad block check failed\n"); + return -1; + } + if (ret == 1) { + baderaseblock = 1; + if (!opts->quiet) + printf("\rBad block at 0x%lx " + "in erase block from " + "0x%x will be skipped\n", + (long) offs, + blockstart); + } + + if (baderaseblock) { + mtdoffset = blockstart + + meminfo->erasesize; + } + offs += meminfo->erasesize; + + } while (offs < blockstart + meminfo->erasesize); + } + + + /* read page data to memory buffer */ + result = meminfo->read(meminfo, + mtdoffset, + meminfo->oobblock, + &readlen, + (unsigned char *) &data_buf); + + if (result != 0) { + printf("reading NAND page at offset 0x%lx failed\n", + mtdoffset); + return -1; + } + + if (imglen < readlen) { + readlen = imglen; + } + + memcpy(buffer, data_buf, readlen); + buffer += readlen; + imglen -= readlen; + + if (opts->readoob) { + result = meminfo->read_oob(meminfo, + mtdoffset, + meminfo->oobsize, + &readlen, + (unsigned char *) + &oob_buf); + + if (result != 0) { + printf("\nMTD readoob failure: %d\n", + result); + return -1; + } + + + if (imglen < readlen) { + readlen = imglen; + } + + memcpy(buffer, oob_buf, readlen); + + buffer += readlen; + imglen -= readlen; + } + + if (!opts->quiet) { + int percent = (int) + ((unsigned long long) + (opts->length-imglen) * 100 + / opts->length); + /* output progress message only at whole percent + * steps to reduce the number of messages printed + * on (slow) serial consoles + */ + if (percent != percent_complete) { + if (!opts->quiet) + printf("\rReading data from 0x%x " + "-- %3d%% complete.", + mtdoffset, percent); + percent_complete = percent; + } + } + + mtdoffset += meminfo->oobblock; + } + + if (!opts->quiet) + printf("\n"); + + if (imglen > 0) { + printf("Could not read entire image due to bad blocks\n"); + return -1; + } + + /* return happy */ + return 0; +} + +/****************************************************************************** + * Support for locking / unlocking operations of some NAND devices + *****************************************************************************/ + +#define NAND_CMD_LOCK 0x2a +#define NAND_CMD_LOCK_TIGHT 0x2c +#define NAND_CMD_UNLOCK1 0x23 +#define NAND_CMD_UNLOCK2 0x24 +#define NAND_CMD_LOCK_STATUS 0x7a + +/** + * nand_lock: Set all pages of NAND flash chip to the LOCK or LOCK-TIGHT + * state + * + * @param meminfo nand mtd instance + * @param tight bring device in lock tight mode + * + * @return 0 on success, -1 in case of error + * + * The lock / lock-tight command only applies to the whole chip. To get some + * parts of the chip lock and others unlocked use the following sequence: + * + * - Lock all pages of the chip using nand_lock(mtd, 0) (or the lockpre pin) + * - Call nand_unlock() once for each consecutive area to be unlocked + * - If desired: Bring the chip to the lock-tight state using nand_lock(mtd, 1) + * + * If the device is in lock-tight state software can't change the + * current active lock/unlock state of all pages. nand_lock() / nand_unlock() + * calls will fail. It is only posible to leave lock-tight state by + * an hardware signal (low pulse on _WP pin) or by power down. + */ +int nand_lock(nand_info_t *meminfo, int tight) +{ + int ret = 0; + int status; + struct nand_chip *this = meminfo->priv; + + /* select the NAND device */ + this->select_chip(meminfo, 0); + + this->cmdfunc(meminfo, + (tight ? NAND_CMD_LOCK_TIGHT : NAND_CMD_LOCK), + -1, -1); + + /* call wait ready function */ + status = this->waitfunc(meminfo, this, FL_WRITING); + + /* see if device thinks it succeeded */ + if (status & 0x01) { + ret = -1; + } + + /* de-select the NAND device */ + this->select_chip(meminfo, -1); + return ret; +} + +/** + * nand_get_lock_status: - query current lock state from one page of NAND + * flash + * + * @param meminfo nand mtd instance + * @param offset page address to query (muss be page aligned!) + * + * @return -1 in case of error + * >0 lock status: + * bitfield with the following combinations: + * NAND_LOCK_STATUS_TIGHT: page in tight state + * NAND_LOCK_STATUS_LOCK: page locked + * NAND_LOCK_STATUS_UNLOCK: page unlocked + * + */ +int nand_get_lock_status(nand_info_t *meminfo, ulong offset) +{ + int ret = 0; + int chipnr; + int page; + struct nand_chip *this = meminfo->priv; + + /* select the NAND device */ + chipnr = (int)(offset >> this->chip_shift); + this->select_chip(meminfo, chipnr); + + + if ((offset & (meminfo->oobblock - 1)) != 0) { + printf ("nand_get_lock_status: " + "Start address must be beginning of " + "nand page!\n"); + ret = -1; + goto out; + } + + /* check the Lock Status */ + page = (int)(offset >> this->page_shift); + this->cmdfunc(meminfo, NAND_CMD_LOCK_STATUS, -1, page & this->pagemask); + + ret = this->read_byte(meminfo) & (NAND_LOCK_STATUS_TIGHT + | NAND_LOCK_STATUS_LOCK + | NAND_LOCK_STATUS_UNLOCK); + + out: + /* de-select the NAND device */ + this->select_chip(meminfo, -1); + return ret; +} + +/** + * nand_unlock: - Unlock area of NAND pages + * only one consecutive area can be unlocked at one time! + * + * @param meminfo nand mtd instance + * @param start start byte address + * @param length number of bytes to unlock (must be a multiple of + * page size nand->oobblock) + * + * @return 0 on success, -1 in case of error + */ +int nand_unlock(nand_info_t *meminfo, ulong start, ulong length) +{ + int ret = 0; + int chipnr; + int status; + int page; + struct nand_chip *this = meminfo->priv; + printf ("nand_unlock: start: %08x, length: %d!\n", + (int)start, (int)length); + + /* select the NAND device */ + chipnr = (int)(start >> this->chip_shift); + this->select_chip(meminfo, chipnr); + + /* check the WP bit */ + this->cmdfunc(meminfo, NAND_CMD_STATUS, -1, -1); + if ((this->read_byte(meminfo) & 0x80) == 0) { + printf ("nand_unlock: Device is write protected!\n"); + ret = -1; + goto out; + } + + if ((start & (meminfo->oobblock - 1)) != 0) { + printf ("nand_unlock: Start address must be beginning of " + "nand page!\n"); + ret = -1; + goto out; + } + + if (length == 0 || (length & (meminfo->oobblock - 1)) != 0) { + printf ("nand_unlock: Length must be a multiple of nand page " + "size!\n"); + ret = -1; + goto out; + } + + /* submit address of first page to unlock */ + page = (int)(start >> this->page_shift); + this->cmdfunc(meminfo, NAND_CMD_UNLOCK1, -1, page & this->pagemask); + + /* submit ADDRESS of LAST page to unlock */ + page += (int)(length >> this->page_shift) - 1; + this->cmdfunc(meminfo, NAND_CMD_UNLOCK2, -1, page & this->pagemask); + + /* call wait ready function */ + status = this->waitfunc(meminfo, this, FL_WRITING); + /* see if device thinks it succeeded */ + if (status & 0x01) { + /* there was an error */ + ret = -1; + goto out; + } + + out: + /* de-select the NAND device */ + this->select_chip(meminfo, -1); + return ret; +} + diff --git a/include/nand.h b/include/nand.h new file mode 100644 index 000000000..23493f7e9 --- /dev/null +++ b/include/nand.h @@ -0,0 +1,124 @@ +/* + * (C) Copyright 2005 + * 2N Telekomunikace, a.s. + * Ladislav Michl + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _NAND_H_ +#define _NAND_H_ + +#include +#include +#include + +typedef struct mtd_info nand_info_t; + +extern int nand_curr_device; +extern nand_info_t nand_info[]; + +static inline int nand_read(nand_info_t *info, ulong ofs, ulong *len, u_char *buf) +{ + return info->read(info, ofs, *len, (size_t *)len, buf); +} + +static inline int nand_write(nand_info_t *info, ulong ofs, ulong *len, u_char *buf) +{ + return info->write(info, ofs, *len, (size_t *)len, buf); +} + +static inline int nand_block_isbad(nand_info_t *info, ulong ofs) +{ + return info->block_isbad(info, ofs); +} + +static inline int nand_erase(nand_info_t *info, ulong off, ulong size) +{ + struct erase_info instr; + + instr.mtd = info; + instr.addr = off; + instr.len = size; + instr.callback = 0; + + return info->erase(info, &instr); +} + + +/***************************************************************************** + * declarations from nand_util.c + ****************************************************************************/ + +struct nand_write_options { + u_char *buffer; /* memory block containing image to write */ + ulong length; /* number of bytes to write */ + ulong offset; /* start address in NAND */ + int quiet; /* don't display progress messages */ + int autoplace; /* if true use auto oob layout */ + int forcejffs2; /* force jffs2 oob layout */ + int forceyaffs; /* force yaffs oob layout */ + int noecc; /* write without ecc */ + int writeoob; /* image contains oob data */ + int pad; /* pad to page size */ + int blockalign; /* 1|2|4 set multiple of eraseblocks + * to align to */ +}; + +typedef struct nand_write_options nand_write_options_t; + +struct nand_read_options { + u_char *buffer; /* memory block in which read image is written*/ + ulong length; /* number of bytes to read */ + ulong offset; /* start address in NAND */ + int quiet; /* don't display progress messages */ + int readoob; /* put oob data in image */ +}; + +typedef struct nand_read_options nand_read_options_t; + +struct nand_erase_options { + ulong length; /* number of bytes to erase */ + ulong offset; /* first address in NAND to erase */ + int quiet; /* don't display progress messages */ + int jffs2; /* if true: format for jffs2 usage + * (write appropriate cleanmarker blocks) */ + int scrub; /* if true, really clean NAND by erasing + * bad blocks (UNSAFE) */ +}; + +typedef struct nand_erase_options nand_erase_options_t; + +int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts); + +int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts); +int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts); + +#define NAND_LOCK_STATUS_TIGHT 0x01 +#define NAND_LOCK_STATUS_LOCK 0x02 +#define NAND_LOCK_STATUS_UNLOCK 0x04 + +int nand_lock( nand_info_t *meminfo, int tight ); +int nand_unlock( nand_info_t *meminfo, ulong start, ulong length ); +int nand_get_lock_status(nand_info_t *meminfo, ulong offset); + +#ifdef CFG_NAND_SELECT_DEVICE +void board_nand_select_device(struct nand_chip *nand, int chip); +#endif + +#endif