Merge branch 'for-next/net'
This commit is contained in:
commit
d08d73ba95
|
@ -23,6 +23,11 @@ config MICREL_PHY
|
|||
---help---
|
||||
Supports the KSZ9021, VSC8201, KS8001 PHYs.
|
||||
|
||||
config NATIONAL_PHY
|
||||
bool "Driver for National Semiconductor PHYs"
|
||||
---help---
|
||||
Currently supports the DP83865 PHY.
|
||||
|
||||
config SMSC_PHY
|
||||
bool "Drivers for SMSC PHYs"
|
||||
---help---
|
||||
|
|
|
@ -2,4 +2,5 @@ obj-y += phy.o mdio_bus.o
|
|||
obj-$(CONFIG_AT803X_PHY) += at803x.o
|
||||
obj-$(CONFIG_LXT_PHY) += lxt.o
|
||||
obj-$(CONFIG_MICREL_PHY) += micrel.o
|
||||
obj-$(CONFIG_NATIONAL_PHY) += national.o
|
||||
obj-$(CONFIG_SMSC_PHY) += smsc.o
|
||||
|
|
|
@ -0,0 +1,95 @@
|
|||
/*
|
||||
* drivers/net/phy/national.c
|
||||
*
|
||||
* Driver for National Semiconductor PHYs
|
||||
*
|
||||
* based on Stuart Menefy's linux national.c driver
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <init.h>
|
||||
#include <linux/phy.h>
|
||||
|
||||
/* Advanced proprietary configuration */
|
||||
#define NS_EXP_MEM_CTL 0x16
|
||||
#define NS_EXP_MEM_DATA 0x1d
|
||||
#define NS_EXP_MEM_ADD 0x1e
|
||||
|
||||
#define LED_CTRL_REG 0x13
|
||||
#define AN_FALLBACK_AN 0x0001
|
||||
#define AN_FALLBACK_CRC 0x0002
|
||||
#define AN_FALLBACK_IE 0x0004
|
||||
#define ALL_FALLBACK_ON (AN_FALLBACK_AN | AN_FALLBACK_CRC | AN_FALLBACK_IE)
|
||||
|
||||
enum hdx_loopback {
|
||||
hdx_loopback_on = 0,
|
||||
hdx_loopback_off = 1,
|
||||
};
|
||||
|
||||
static u8 ns_exp_read(struct phy_device *phydev, u16 reg)
|
||||
{
|
||||
phy_write(phydev, NS_EXP_MEM_ADD, reg);
|
||||
return phy_read(phydev, NS_EXP_MEM_DATA);
|
||||
}
|
||||
|
||||
static void ns_exp_write(struct phy_device *phydev, u16 reg, u8 data)
|
||||
{
|
||||
phy_write(phydev, NS_EXP_MEM_ADD, reg);
|
||||
phy_write(phydev, NS_EXP_MEM_DATA, data);
|
||||
}
|
||||
|
||||
static void ns_giga_speed_fallback(struct phy_device *phydev, int mode)
|
||||
{
|
||||
int bmcr = phy_read(phydev, MII_BMCR);
|
||||
|
||||
phy_write(phydev, MII_BMCR, (bmcr | BMCR_PDOWN));
|
||||
|
||||
/* Enable 8 bit expended memory read/write (no auto increment) */
|
||||
phy_write(phydev, NS_EXP_MEM_CTL, 0);
|
||||
phy_write(phydev, NS_EXP_MEM_ADD, 0x1C0);
|
||||
phy_write(phydev, NS_EXP_MEM_DATA, 0x0008);
|
||||
phy_write(phydev, MII_BMCR, (bmcr & ~BMCR_PDOWN));
|
||||
phy_write(phydev, LED_CTRL_REG, mode);
|
||||
}
|
||||
|
||||
static void ns_10_base_t_hdx_loopack(struct phy_device *phydev, int disable)
|
||||
{
|
||||
if (disable)
|
||||
ns_exp_write(phydev, 0x1c0, ns_exp_read(phydev, 0x1c0) | 1);
|
||||
else
|
||||
ns_exp_write(phydev, 0x1c0,
|
||||
ns_exp_read(phydev, 0x1c0) & 0xfffe);
|
||||
|
||||
pr_debug("10BASE-T HDX loopback %s\n",
|
||||
(ns_exp_read(phydev, 0x1c0) & 0x0001) ? "off" : "on");
|
||||
}
|
||||
|
||||
static int ns_config_init(struct phy_device *phydev)
|
||||
{
|
||||
ns_giga_speed_fallback(phydev, ALL_FALLBACK_ON);
|
||||
/* In the latest MAC or switches design, the 10 Mbps loopback
|
||||
is desired to be turned off. */
|
||||
ns_10_base_t_hdx_loopack(phydev, hdx_loopback_off);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct phy_driver dp83865_driver = {
|
||||
.phy_id = 0x20005c70,
|
||||
.phy_id_mask = 0xfffffff0,
|
||||
.drv.name = "NatSemi DP83865",
|
||||
.features = PHY_GBIT_FEATURES |
|
||||
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
||||
.config_init = ns_config_init,
|
||||
};
|
||||
|
||||
static int ns_phy_init(void)
|
||||
{
|
||||
return phy_driver_register(&dp83865_driver);
|
||||
}
|
||||
fs_initcall(ns_phy_init);
|
|
@ -132,6 +132,8 @@
|
|||
#define MARVELL_CTRL_TXDELAY 0x0002
|
||||
#define MARVELL_CTRL_RXDELAY 0x0080
|
||||
|
||||
#define FLAG_EEPROM_MAC (1UL << 0) /* init device MAC from eeprom */
|
||||
|
||||
/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
|
||||
struct asix_data {
|
||||
u8 multi_filter[AX_MCAST_FILTER_SIZE];
|
||||
|
@ -364,11 +366,21 @@ static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
|
|||
static int asix_get_ethaddr(struct eth_device *edev, unsigned char *adr)
|
||||
{
|
||||
struct usbnet *udev = container_of(edev, struct usbnet, edev);
|
||||
int ret;
|
||||
int i, ret;
|
||||
|
||||
/* Get the MAC address */
|
||||
if ((ret = asix_read_cmd(udev, AX_CMD_READ_NODE_ID,
|
||||
0, 0, 6, adr)) < 0) {
|
||||
if (udev->driver_info->data & FLAG_EEPROM_MAC) {
|
||||
for (i = 0; i < (6 >> 1); i++) {
|
||||
ret = asix_read_cmd(udev, AX_CMD_READ_EEPROM, 0x04 + i,
|
||||
0, 2, adr + i * 2);
|
||||
if (ret < 0)
|
||||
break;
|
||||
}
|
||||
} else {
|
||||
ret = asix_read_cmd(udev, AX_CMD_READ_NODE_ID, 0, 0, 6, adr);
|
||||
}
|
||||
|
||||
if (ret < 0) {
|
||||
debug("Failed to read MAC address: %d\n", ret);
|
||||
return -1;
|
||||
}
|
||||
|
@ -408,11 +420,11 @@ static int asix_rx_fixup(struct usbnet *dev, void *buf, int len)
|
|||
len -= 4;
|
||||
|
||||
while (len > 0) {
|
||||
if ((short)(header & 0x0000ffff) != ~((short)((header & 0xffff0000) >> 16)))
|
||||
if ((header & 0x07ff) != ((~header >> 16) & 0x07ff))
|
||||
dev_err(&dev->edev.dev, "asix_rx_fixup() Bad Header Length\n");
|
||||
|
||||
/* get the packet length */
|
||||
size = (unsigned short) (header & 0x0000ffff);
|
||||
size = (unsigned short) (header & 0x07ff);
|
||||
|
||||
if (size > 1514) {
|
||||
dev_err(&dev->edev.dev, "asix_rx_fixup() Bad RX Length %d\n", size);
|
||||
|
@ -680,6 +692,16 @@ static struct driver_info ax88772_info = {
|
|||
.tx_fixup = asix_tx_fixup,
|
||||
};
|
||||
|
||||
static struct driver_info ax88772b_info = {
|
||||
.description = "ASIX AX88772B USB 2.0 Ethernet",
|
||||
.bind = ax88772_bind,
|
||||
.unbind = asix_unbind,
|
||||
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
|
||||
.rx_fixup = asix_rx_fixup,
|
||||
.tx_fixup = asix_tx_fixup,
|
||||
.data = FLAG_EEPROM_MAC,
|
||||
};
|
||||
|
||||
static const struct usb_device_id products [] = {
|
||||
{
|
||||
// Linksys USB200M
|
||||
|
@ -761,6 +783,10 @@ static const struct usb_device_id products [] = {
|
|||
// Cables-to-Go USB Ethernet Adapter
|
||||
USB_DEVICE(0x0b95, 0x772a),
|
||||
.driver_info = &ax88772_info,
|
||||
}, {
|
||||
// LevelOne USB Fast Ethernet Adapter
|
||||
USB_DEVICE(0x0b95, 0x772b),
|
||||
.driver_info = &ax88772b_info,
|
||||
},
|
||||
{ }, // END
|
||||
};
|
||||
|
|
|
@ -143,12 +143,12 @@ int string_to_ethaddr(const char *str, u8 enetaddr[6])
|
|||
|
||||
if (!str || strlen(str) != 17) {
|
||||
memset(enetaddr, 0, 6);
|
||||
return -1;
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (str[2] != ':' || str[5] != ':' || str[8] != ':' ||
|
||||
str[11] != ':' || str[14] != ':')
|
||||
return -1;
|
||||
return -EINVAL;
|
||||
|
||||
for (reg = 0; reg < 6; ++reg) {
|
||||
enetaddr[reg] = simple_strtoul (str, &e, 16);
|
||||
|
|
Loading…
Reference in New Issue