ARM:phyFLEX-iMX6: Remove eth phy reset form board
Remove ethernet phy reset from board file. The reset is now made by the fec
driver since commit:
|commit 5c1846b625
|Author: Rostislav Lisovy <lisovy@gmail.com>
|Date: Wed Nov 20 22:22:25 2013 +0100
|
| ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree
|
| Signed-off-by: Rostislav Lisovy <lisovy@gmail.com>
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is contained in:
parent
7e094dd2e2
commit
e49b40d985
|
@ -32,8 +32,6 @@
|
|||
#include <mach/iomux-mx6.h>
|
||||
#include <mach/imx6.h>
|
||||
|
||||
#define ETH_PHY_RST IMX_GPIO_NR(3, 23)
|
||||
|
||||
#define GPIO_2_11_PD_CTL MX6_PAD_CTL_PUS_100K_DOWN | MX6_PAD_CTL_PUE | MX6_PAD_CTL_PKE | \
|
||||
MX6_PAD_CTL_SPEED_MED | MX6_PAD_CTL_DSE_40ohm | MX6_PAD_CTL_HYS
|
||||
|
||||
|
@ -65,16 +63,6 @@ static void phyflex_err006282_workaround(void)
|
|||
gpio_direction_input(MX6_PHYFLEX_ERR006282);
|
||||
}
|
||||
|
||||
static int eth_phy_reset(void)
|
||||
{
|
||||
gpio_request(ETH_PHY_RST, "phy reset");
|
||||
gpio_direction_output(ETH_PHY_RST, 0);
|
||||
mdelay(1);
|
||||
gpio_set_value(ETH_PHY_RST, 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
|
||||
{
|
||||
phy_write(dev, 0x0d, device);
|
||||
|
@ -99,7 +87,6 @@ static int phytec_pfla02_init(void)
|
|||
|
||||
phyflex_err006282_workaround();
|
||||
|
||||
eth_phy_reset();
|
||||
phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
|
||||
ksz9031rn_phy_fixup);
|
||||
|
||||
|
|
Loading…
Reference in New Issue