arm/mach-pxa: add mioa701 board
Add Mitac MioA701 board initial support. The support provides basic boot and : - a console over USB (serial gadget). - the SD card support - the MTD docg3 support - the LCD support Add a check in the default environment for a barebox.env file on the first partition (FAT). If the file exists, source it instead of the normal boot procedure. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is contained in:
Robert Jarzmik
Sascha Hauer
parent
f67fc4fb7a
commit
ff79f7a41c
|
|
@ -83,6 +83,7 @@ board-$(CONFIG_MACH_FREESCALE_MX25_3STACK) := freescale-mx25-3-stack
|
|||
board-$(CONFIG_MACH_FREESCALE_MX35_3STACK) := freescale-mx35-3-stack
|
||||
board-$(CONFIG_MACH_IMX21ADS) := imx21ads
|
||||
board-$(CONFIG_MACH_IMX27ADS) := imx27ads
|
||||
board-$(CONFIG_MACH_MIOA701) := mioa701
|
||||
board-$(CONFIG_MACH_MMCCPU) := mmccpu
|
||||
board-$(CONFIG_MACH_MX1ADS) := mx1ads
|
||||
board-$(CONFIG_MACH_NOMADIK_8815NHK) := nhk8815
|
||||
|
|
|
|||
|
|
@ -0,0 +1 @@
|
|||
obj-y += board.o
|
||||
|
|
@ -0,0 +1,278 @@
|
|||
/*
|
||||
* (C) 2011 Robert Jarzmik <robert.jarzmik@free.fr>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <driver.h>
|
||||
#include <environment.h>
|
||||
#include <fs.h>
|
||||
#include <init.h>
|
||||
#include <partition.h>
|
||||
#include <led.h>
|
||||
#include <gpio.h>
|
||||
#include <pwm.h>
|
||||
|
||||
#include <mach/devices.h>
|
||||
#include <mach/mfp-pxa27x.h>
|
||||
#include <mach/pxa-regs.h>
|
||||
#include <mach/udc_pxa2xx.h>
|
||||
#include <mach/mci_pxa2xx.h>
|
||||
|
||||
#include <asm/armlinux.h>
|
||||
#include <asm/io.h>
|
||||
#include <generated/mach-types.h>
|
||||
#include <asm/mmu.h>
|
||||
|
||||
#include "mioa701.h"
|
||||
|
||||
/*
|
||||
* LTM0305A776C LCD panel timings
|
||||
*
|
||||
* see:
|
||||
* - the LTM0305A776C datasheet,
|
||||
* - and the PXA27x Programmers' manual
|
||||
*/
|
||||
static struct pxafb_videomode mioa701_ltm0305a776c = {
|
||||
{
|
||||
.pixclock = 220000, /* CLK=4.545 MHz */
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.hsync_len = 4,
|
||||
.vsync_len = 2,
|
||||
.left_margin = 6,
|
||||
.right_margin = 4,
|
||||
.upper_margin = 5,
|
||||
.lower_margin = 3,
|
||||
},
|
||||
.bpp = 16,
|
||||
};
|
||||
|
||||
static void mioa701_lcd_power(int on)
|
||||
{
|
||||
gpio_set_value(GPIO87_LCD_POWER, on);
|
||||
}
|
||||
|
||||
static void mioa701_lcd_backlight(int on)
|
||||
{
|
||||
struct pwm_device *pwm0 = pwm_request("pxa_pwm0");
|
||||
|
||||
/*
|
||||
* The backlight has a base frequency of 250kHz (<=> 4 ms).
|
||||
*/
|
||||
if (on) {
|
||||
pwm_enable(pwm0);
|
||||
pwm_config(pwm0, 2000 * 1024, 4000 * 1024);
|
||||
} else {
|
||||
pwm_disable(pwm0);
|
||||
}
|
||||
pwm_free(pwm0);
|
||||
}
|
||||
|
||||
static struct pxafb_platform_data mioa701_pxafb_info = {
|
||||
.mode = &mioa701_ltm0305a776c,
|
||||
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
|
||||
.lcd_power = mioa701_lcd_power,
|
||||
.backlight_power = mioa701_lcd_backlight,
|
||||
};
|
||||
|
||||
#define MIO_LED(_name, _gpio) \
|
||||
{ .gpio = _gpio, .active_low = 1, .led = { .name = #_name, } }
|
||||
static struct gpio_led leds[] = {
|
||||
MIO_LED(charging, GPIO10_LED_nCharging),
|
||||
MIO_LED(blue, GPIO97_LED_nBlue),
|
||||
MIO_LED(orange, GPIO98_LED_nOrange),
|
||||
MIO_LED(vibra, GPIO82_LED_nVibra),
|
||||
MIO_LED(keyboard, GPIO115_LED_nKeyboard),
|
||||
};
|
||||
|
||||
|
||||
static int is_usb_connected(void)
|
||||
{
|
||||
return !gpio_get_value(GPIO13_nUSB_DETECT);
|
||||
}
|
||||
|
||||
static struct pxa2xx_udc_mach_info mioa701_udc_info = {
|
||||
.udc_is_connected = is_usb_connected,
|
||||
.gpio_pullup = GPIO22_USB_ENABLE,
|
||||
};
|
||||
|
||||
static struct pxamci_platform_data mioa701_mmc_info = {
|
||||
.gpio_power = GPIO91_SDIO_EN,
|
||||
};
|
||||
|
||||
static int mioa701_devices_init(void)
|
||||
{
|
||||
int i;
|
||||
void *docg3_iospace;
|
||||
|
||||
pxa_add_pwm((void *)0x40b00000, 0);
|
||||
pxa_add_fb((void *)0x44000000, &mioa701_pxafb_info);
|
||||
pxa_add_mmc((void *)0x41100000, -1, &mioa701_mmc_info);
|
||||
docg3_iospace = map_io_sections(0x0, (void *)0xe0000000, 0x2000);
|
||||
add_generic_device("docg3", -1, NULL, (ulong) docg3_iospace, 0x2000,
|
||||
IORESOURCE_MEM, NULL);
|
||||
armlinux_set_bootparams((void *)0xa0000100);
|
||||
armlinux_set_architecture(MACH_TYPE_MIOA701);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(leds); i++)
|
||||
led_gpio_register(&leds[i]);
|
||||
add_generic_device("pxa27x-udc", 0, NULL, 0x40600000,
|
||||
1024, IORESOURCE_MEM, &mioa701_udc_info);
|
||||
return 0;
|
||||
}
|
||||
|
||||
device_initcall(mioa701_devices_init);
|
||||
|
||||
static unsigned long mioa701_pin_config[] = {
|
||||
/* Mio global */
|
||||
MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
|
||||
MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
|
||||
MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
|
||||
MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
|
||||
MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
|
||||
|
||||
/* Backlight PWM 0 */
|
||||
GPIO16_PWM0_OUT,
|
||||
|
||||
/* LCD */
|
||||
GPIOxx_LCD_TFT_16BPP,
|
||||
MIO_CFG_OUT(GPIO87_LCD_POWER, AF0, DRIVE_LOW),
|
||||
|
||||
/* MMC */
|
||||
GPIO32_MMC_CLK,
|
||||
GPIO92_MMC_DAT_0,
|
||||
GPIO109_MMC_DAT_1,
|
||||
GPIO110_MMC_DAT_2,
|
||||
GPIO111_MMC_DAT_3,
|
||||
GPIO112_MMC_CMD,
|
||||
MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
|
||||
MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
|
||||
MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
|
||||
|
||||
/* USB */
|
||||
MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
|
||||
MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
|
||||
|
||||
/* QCI */
|
||||
GPIO12_CIF_DD_7,
|
||||
GPIO17_CIF_DD_6,
|
||||
GPIO50_CIF_DD_3,
|
||||
GPIO51_CIF_DD_2,
|
||||
GPIO52_CIF_DD_4,
|
||||
GPIO53_CIF_MCLK,
|
||||
GPIO54_CIF_PCLK,
|
||||
GPIO55_CIF_DD_1,
|
||||
GPIO81_CIF_DD_0,
|
||||
GPIO82_CIF_DD_5,
|
||||
GPIO84_CIF_FV,
|
||||
GPIO85_CIF_LV,
|
||||
|
||||
/* Bluetooth */
|
||||
MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
|
||||
GPIO44_BTUART_CTS,
|
||||
GPIO42_BTUART_RXD,
|
||||
GPIO45_BTUART_RTS,
|
||||
GPIO43_BTUART_TXD,
|
||||
MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
|
||||
MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
|
||||
MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
|
||||
|
||||
/* GPS */
|
||||
MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
|
||||
MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
|
||||
MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
|
||||
MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
|
||||
MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
|
||||
GPIO46_STUART_RXD,
|
||||
GPIO47_STUART_TXD,
|
||||
|
||||
/* GSM */
|
||||
MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
|
||||
MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
|
||||
MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
|
||||
MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
|
||||
MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
|
||||
MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
|
||||
GPIO34_FFUART_RXD,
|
||||
GPIO35_FFUART_CTS,
|
||||
GPIO36_FFUART_DCD,
|
||||
GPIO37_FFUART_DSR,
|
||||
GPIO39_FFUART_TXD,
|
||||
GPIO40_FFUART_DTR,
|
||||
GPIO41_FFUART_RTS,
|
||||
|
||||
/* Sound */
|
||||
GPIO28_AC97_BITCLK,
|
||||
GPIO29_AC97_SDATA_IN_0,
|
||||
GPIO30_AC97_SDATA_OUT,
|
||||
GPIO31_AC97_SYNC,
|
||||
GPIO89_AC97_SYSCLK,
|
||||
MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
|
||||
|
||||
/* Leds */
|
||||
MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
|
||||
MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
|
||||
MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
|
||||
MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
|
||||
MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
|
||||
|
||||
/* Keyboard */
|
||||
MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
|
||||
MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
|
||||
MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
|
||||
GPIO100_KP_MKIN_0,
|
||||
GPIO101_KP_MKIN_1,
|
||||
GPIO102_KP_MKIN_2,
|
||||
GPIO103_KP_MKOUT_0,
|
||||
GPIO104_KP_MKOUT_1,
|
||||
GPIO105_KP_MKOUT_2,
|
||||
|
||||
/* I2C */
|
||||
GPIO117_I2C_SCL,
|
||||
GPIO118_I2C_SDA,
|
||||
|
||||
/* Unknown */
|
||||
MFP_CFG_IN(GPIO20, AF0),
|
||||
MFP_CFG_IN(GPIO21, AF0),
|
||||
MFP_CFG_IN(GPIO33, AF0),
|
||||
MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
|
||||
MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
|
||||
MFP_CFG_IN(GPIO96, AF0),
|
||||
MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
|
||||
};
|
||||
|
||||
static int mioa701_coredevice_init(void)
|
||||
{
|
||||
unsigned int cclk;
|
||||
/* route pins */
|
||||
pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
|
||||
|
||||
CCCR = CCCR_A | 0x20110;
|
||||
cclk = 0x02;
|
||||
asm volatile("mcr p14, 0, %0, c6, c0, 0 @ set CCLK"
|
||||
: : "r" (cclk) : "cc");
|
||||
|
||||
return 0;
|
||||
}
|
||||
coredevice_initcall(mioa701_coredevice_init);
|
||||
|
||||
static int mioa701_mem_init(void)
|
||||
{
|
||||
arm_add_mem_device("ram0", 0xa0000000, 64 * 1024 * 1024);
|
||||
return 0;
|
||||
}
|
||||
mem_initcall(mioa701_mem_init);
|
||||
|
|
@ -0,0 +1,22 @@
|
|||
/*
|
||||
* (C) 2011 Robert Jarzmik <robert.jarzmik@free.fr>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
#!/bin/sh
|
||||
|
||||
# Page+OOB specific partitions
|
||||
addpart /dev/mtdraw0 1081344@3649536(msipl)
|
||||
addpart /dev/mtdraw0 270336@3649536(barebox)
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
#!/bin/sh
|
||||
|
||||
PATH=/env/bin
|
||||
export PATH
|
||||
|
||||
. /env/config
|
||||
addpart /dev/mtd0 $mtdparts
|
||||
|
||||
usbserial -s "Mio A701 usb gadget"
|
||||
led keyboard 0
|
||||
|
||||
sdcard_override
|
||||
|
||||
fb0.enable=1
|
||||
bmp /dev/mtd0.barebox-logo
|
||||
|
||||
mtd_env_override
|
||||
if [ $? = 0 ]; then
|
||||
echo "Switching to custom environment"
|
||||
/env/init
|
||||
exit
|
||||
fi
|
||||
|
||||
echo "No custom environment found"
|
||||
echo -n "Hit any key to stop autoboot: "
|
||||
timeout -a $autoboot_timeout
|
||||
if [ $? != 0 ]; then
|
||||
echo
|
||||
echo "Welcome to barebox console"
|
||||
exit
|
||||
fi
|
||||
|
||||
echo "Booting linux kernel on docg3 chip ..."
|
||||
bootargs="$bootargs mtdparts=mtd0:$mtdparts root=/dev/mtd4"
|
||||
bootm /dev/mtd0.kernel
|
||||
|
|
@ -0,0 +1,4 @@
|
|||
#!/bin/sh
|
||||
|
||||
loadenv /dev/mtd0.barebox-env
|
||||
exit $?
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
#!/bin/sh
|
||||
# Script to switch to execute sdcard environment scripts if available
|
||||
#
|
||||
# This enables an override of the default environment if an SD Card
|
||||
# is inserted, has a FAT filesystem, and has a barebox.env file in
|
||||
# the root directory.
|
||||
|
||||
mci0.probe=1
|
||||
if [ $mci0.probe = 1 ]; then
|
||||
mkdir /sdcard
|
||||
mount /dev/disk0.0 fat /sdcard
|
||||
if [ -f /sdcard/barebox.env ]; then
|
||||
loadenv /sdcard/barebox.env /env.sd
|
||||
/env.sd/bin/init
|
||||
fi
|
||||
fi
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
#!/bin/sh
|
||||
|
||||
autoboot_timeout=3
|
||||
|
||||
mtdparts="256k@3456k(barebox)ro,256k(barebox-logo),128k(barebox-env),4M(kernel),-(root)"
|
||||
|
|
@ -0,0 +1,81 @@
|
|||
/*
|
||||
* (C) 2011 Robert Jarzmik <robert.jarzmik@free.fr>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
*/
|
||||
#ifndef _MIOA701_H_
|
||||
#define _MIOA701_H_
|
||||
|
||||
#define MIO_CFG_IN(pin, af) \
|
||||
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
|
||||
(MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
|
||||
|
||||
#define MIO_CFG_OUT(pin, af, state) \
|
||||
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
|
||||
(MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
|
||||
|
||||
/* Global GPIOs */
|
||||
#define GPIO9_CHARGE_EN 9
|
||||
#define GPIO18_POWEROFF 18
|
||||
#define GPIO87_LCD_POWER 87
|
||||
#define GPIO96_AC_DETECT 96
|
||||
#define GPIO80_MAYBE_CHARGE_VDROP 80 /* Drop of 88mV */
|
||||
|
||||
/* USB */
|
||||
#define GPIO13_nUSB_DETECT 13
|
||||
#define GPIO22_USB_ENABLE 22
|
||||
|
||||
/* SDIO bits */
|
||||
#define GPIO78_SDIO_RO 78
|
||||
#define GPIO15_SDIO_INSERT 15
|
||||
#define GPIO91_SDIO_EN 91
|
||||
|
||||
/* Bluetooth */
|
||||
#define GPIO14_BT_nACTIVITY 14
|
||||
#define GPIO83_BT_ON 83
|
||||
#define GPIO77_BT_UNKNOWN1 77
|
||||
#define GPIO86_BT_MAYBE_nRESET 86
|
||||
|
||||
/* GPS */
|
||||
#define GPIO23_GPS_UNKNOWN1 23
|
||||
#define GPIO26_GPS_ON 26
|
||||
#define GPIO27_GPS_RESET 27
|
||||
#define GPIO106_GPS_UNKNOWN2 106
|
||||
#define GPIO107_GPS_UNKNOWN3 107
|
||||
|
||||
/* GSM */
|
||||
#define GPIO24_GSM_MOD_RESET_CMD 24
|
||||
#define GPIO88_GSM_nMOD_ON_CMD 88
|
||||
#define GPIO90_GSM_nMOD_OFF_CMD 90
|
||||
#define GPIO114_GSM_nMOD_DTE_UART_STATE 114
|
||||
#define GPIO25_GSM_MOD_ON_STATE 25
|
||||
#define GPIO113_GSM_EVENT 113
|
||||
|
||||
/* SOUND */
|
||||
#define GPIO12_HPJACK_INSERT 12
|
||||
|
||||
/* LEDS */
|
||||
#define GPIO10_LED_nCharging 10
|
||||
#define GPIO97_LED_nBlue 97
|
||||
#define GPIO98_LED_nOrange 98
|
||||
#define GPIO82_LED_nVibra 82
|
||||
#define GPIO115_LED_nKeyboard 115
|
||||
|
||||
/* Keyboard */
|
||||
#define GPIO0_KEY_POWER 0
|
||||
#define GPIO93_KEY_VOLUME_UP 93
|
||||
#define GPIO94_KEY_VOLUME_DOWN 94
|
||||
|
||||
#endif /* _MIOA701_H */
|
||||
|
|
@ -0,0 +1,62 @@
|
|||
CONFIG_ARCH_PXA=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
|
||||
CONFIG_ARM_UNWIND=y
|
||||
# CONFIG_BANNER is not set
|
||||
CONFIG_TEXT_BASE=0xa3f00000
|
||||
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0x262144
|
||||
CONFIG_MALLOC_SIZE=0x1000000
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_LONGHELP=y
|
||||
CONFIG_GLOB=y
|
||||
CONFIG_HUSH_GETOPT=y
|
||||
CONFIG_CMDLINE_EDITING=y
|
||||
CONFIG_AUTO_COMPLETE=y
|
||||
CONFIG_MENU=y
|
||||
CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/mioa701/env"
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_CMD_EDIT=y
|
||||
CONFIG_CMD_SLEEP=y
|
||||
CONFIG_CMD_SAVEENV=y
|
||||
CONFIG_CMD_EXPORT=y
|
||||
CONFIG_CMD_PRINTENV=y
|
||||
CONFIG_CMD_READLINE=y
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_ECHO_E=y
|
||||
CONFIG_CMD_LOADB=y
|
||||
CONFIG_CMD_LOADY=y
|
||||
CONFIG_CMD_LOADS=y
|
||||
CONFIG_CMD_SAVES=y
|
||||
CONFIG_CMD_MEMINFO=y
|
||||
CONFIG_CMD_IOMEM=y
|
||||
CONFIG_CMD_CRC=y
|
||||
CONFIG_CMD_CRC_CMP=y
|
||||
CONFIG_CMD_FLASH=y
|
||||
CONFIG_CMD_BOOTM_SHOW_TYPE=y
|
||||
CONFIG_CMD_BOOTM_VERBOSE=y
|
||||
CONFIG_CMD_BOOTM_INITRD=y
|
||||
CONFIG_CMD_RESET=y
|
||||
CONFIG_CMD_TIMEOUT=y
|
||||
CONFIG_CMD_PARTITION=y
|
||||
CONFIG_CMD_BMP=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_UNCOMPRESS=y
|
||||
CONFIG_CMD_LED=y
|
||||
CONFIG_DRIVER_SERIAL_PXA=y
|
||||
# CONFIG_SPI is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_RAW_DEVICE=y
|
||||
CONFIG_MTD_DOCG3=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_SERIAL=y
|
||||
CONFIG_VIDEO=y
|
||||
CONFIG_DRIVER_VIDEO_PXA=y
|
||||
CONFIG_MCI=y
|
||||
CONFIG_MCI_PXA=y
|
||||
CONFIG_LED=y
|
||||
CONFIG_LED_GPIO=y
|
||||
CONFIG_FS_CRAMFS=y
|
||||
CONFIG_FS_FAT=y
|
||||
CONFIG_FS_FAT_WRITE=y
|
||||
CONFIG_FS_FAT_LFN=y
|
||||
CONFIG_BZLIB=y
|
||||
|
|
@ -2,9 +2,11 @@ if ARCH_PXA
|
|||
|
||||
config ARCH_TEXT_BASE
|
||||
hex
|
||||
default 0xa0000000 if MACH_MIOA701
|
||||
|
||||
config BOARDINFO
|
||||
string
|
||||
default "Scoter Mitac Mio A701" if MACH_MIOA701
|
||||
|
||||
# ----------------------------------------------------------
|
||||
|
||||
|
|
@ -29,8 +31,24 @@ choice
|
|||
prompt "PXA27x Board Type"
|
||||
bool
|
||||
|
||||
config MACH_MIOA701
|
||||
bool "Mitac Mio A701"
|
||||
select BCH_CONST_PARAMS
|
||||
select PWM
|
||||
help
|
||||
Say Y here if you are using a Mitac Mio A701 smartphone
|
||||
board
|
||||
endchoice
|
||||
|
||||
if MACH_MIOA701
|
||||
config BCH_CONST_M
|
||||
int
|
||||
default 14 if MACH_MIOA701
|
||||
config BCH_CONST_T
|
||||
int
|
||||
default 4 if MACH_MIOA701
|
||||
endif
|
||||
|
||||
endif
|
||||
|
||||
# ----------------------------------------------------------
|
||||
|
|
|
|||
Loading…
Reference in New Issue