/* * Copyright 2012 Sascha Hauer, Pengutronix * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; #include "imx51.dtsi" / { model = "Genesi Efika MX Smartbook"; compatible = "genesi,imx51-sb", "fsl,imx51"; chosen { linux,stdout-path = "/soc/aips@70000000/serial@73fbc000"; }; memory { reg = <0x90000000 0x20000000>; }; leds { compatible = "gpio-leds"; mail { label = "mail"; gpios = <&gpio1 3 1>; linux,default-trigger = "heartbeat"; }; white { label = "white"; gpios = <&gpio2 25 0>; linux,default-trigger = "none"; }; }; gpio-keys { compatible = "gpio-keys"; power { label = "Power"; gpios = <&gpio2 31 0>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; lid { label = "Lid"; gpios = <&gpio3 14 0>; linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; gpio-key,wakeup; }; }; sound { compatible = "fsl,imx51-efikasb-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "imx51-efikasb-sgtl5000"; ssi-controller = <&ssi1>; audio-codec = <&sgtl5000>; audio-routing = "Headphone Jack", "HP_OUT"; mux-int-port = <1>; mux-ext-port = <3>; }; backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 78770>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; }; }; &ssi1 { fsl,mode = "i2s-slave"; status = "okay"; }; &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; hog { pinctrl_hog: hoggrp { fsl,pins = < MX51_PAD_EIM_DTACK__GPIO2_31 0x800000c0 /* Power button */ MX51_PAD_EIM_A16__GPIO2_10 0x80000000 /* WLAN reset */ MX51_PAD_EIM_A22__GPIO2_16 0x80000000 /* WLAN power */ MX51_PAD_CSI2_D13__GPIO4_10 0x80000000 /* WWAN power? */ MX51_PAD_DI1_PIN12__GPIO3_1 0x80000000 /* WLAN switch */ MX51_PAD_EIM_A17__GPIO2_11 0x80000000 /* Bluetooth power */ MX51_PAD_EIM_A23__GPIO2_17 0x80000000 /* Audio amp enable, 1 = on */ MX51_PAD_GPIO1_6__REF_EN_B 0x80000000 /* PMIC interrupt */ MX51_PAD_DI1_PIN11__GPIO3_0 0x80000000 /* Battery low */ MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x80000000 /* Power good */ MX51_PAD_CSI1_VSYNC__GPIO3_14 0x80000000 /* Lid switch, 0 = closed */ MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 MX51_PAD_CSI1_D8__GPIO3_12 0x80000000 /* LVDS enable, 1 = on */ MX51_PAD_GPIO1_2__GPIO1_2 0x80000000 /* Backlight PWM */ MX51_PAD_CSI2_D19__GPIO4_12 0x80000000 /* Backlight power, 0 = on */ MX51_PAD_DISPB2_SER_DIO__GPIO3_6 0x80000000 /* LVDS reset, 1 = reset */ MX51_PAD_DISPB2_SER_DIN__GPIO3_5 0x80000000 /* LVDS reset (1 = reset) */ MX51_PAD_DISPB2_SER_CLK__GPIO3_7 0x80000000 /* LVDS power, 1 = on */ MX51_PAD_CSI1_D9__GPIO3_13 0x80000000 /* LCD enable (1 = on */ MX51_PAD_NANDF_CS0__GPIO3_16 0x80000000 /* Camera power, 0 = on */ MX51_PAD_GPIO1_5__GPIO1_5 0x80000000 /* USB hub reset, 0 = reset */ MX51_PAD_EIM_D27__GPIO2_9 0x80000000 /* USB phy reset, 0 = reset */ MX51_PAD_DISPB2_SER_DIO__GPIO3_6 0x80000000 /* Battery, 0 = inserted */ MX51_PAD_GPIO1_3__GPIO1_3 0x80000000 /* Alarm LED, 0 = on */ MX51_PAD_EIM_CS0__GPIO2_25 0x80000000 /* Caps LED, 1 = on */ MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 /* Audio clk enable */ MX51_PAD_EIM_A26__GPIO2_20 0x80000000 MX51_PAD_USBH1_STP__GPIO1_27 0x80000000 >; }; }; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_1>; status = "okay"; }; &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2_1>; clock-frequency = <100000>; status = "okay"; sgtl5000: codec@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clock-frequency = <12288000>; VDDA-supply = <&vdig_reg>; VDDD-supply = <&vdig_reg>; VDDIO-supply = <&vvideo_reg>; }; battery: battery@0b { compatible = "sbs,sbs-battery"; reg = <0x0b>; sbs,battery-detect-gpios = <&gpio3 6 1>; }; lvds: mtl017@3a { compatible = "mtl017"; reg = <0x3a>; crtcs = <&ipu 1>; edid-i2c = <&i2c2>; interface-pix-fmt = "rgb565"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu_disp1_1>; }; }; &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1_1>; cd-gpios = <&gpio2 27 0>; wp-gpios = <&gpio1 1 0>; status = "okay"; }; &esdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2_1>; cd-gpios = <&gpio1 8 0>; wp-gpios = <&gpio1 7 0>; status = "okay"; }; &ecspi1 { fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 23 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1_1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; status = "okay"; pmic: mc13892@0 { compatible = "fsl,mc13892"; spi-max-frequency = <20000000>; reg = <0>; spi-cs-high; #address-cells = <1>; #size-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <6 0x4>; regulators { sw1_reg: sw1 { regulator-min-microvolt = <600000>; regulator-max-microvolt = <1375000>; regulator-boot-on; regulator-always-on; }; sw2_reg: sw2 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1850000>; regulator-boot-on; regulator-always-on; }; sw3_reg: sw3 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1850000>; regulator-boot-on; regulator-always-on; }; sw4_reg: sw4 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1850000>; regulator-boot-on; regulator-always-on; }; vpll_reg: vpll { regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; vdig_reg: vdig { regulator-min-microvolt = <1650000>; regulator-max-microvolt = <1650000>; }; vsd_reg: vsd { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3150000>; }; vusb2_reg: vusb2 { regulator-min-microvolt = <2400000>; regulator-max-microvolt = <2775000>; regulator-boot-on; regulator-always-on; }; vvideo_reg: vvideo { regulator-min-microvolt = <2775000>; regulator-max-microvolt = <2775000>; }; vaudio_reg: vaudio { regulator-min-microvolt = <2300000>; regulator-max-microvolt = <3000000>; }; vcam_reg: vcam { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <3000000>; }; vgen1_reg: vgen1 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; vgen2_reg: vgen2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3150000>; regulator-always-on; }; vgen3_reg: vgen3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2900000>; regulator-always-on; }; }; }; flash: m25p80 { compatible = "sst,sst25vf032b", "m25p80"; spi-max-frequency = <15000000>; reg = <1>; }; }; &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux_1>; status = "okay"; }; &pata { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pata_1>; status = "okay"; }; &usbotg { barebox,phy_type = "utmi_wide"; phy_type = "ulpi"; status = "okay"; }; &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1_1>; barebox,phy_type = "ulpi"; phy_type = "ulpi"; status = "okay"; }; &usbh2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh2_1>; barebox,phy_type = "ulpi"; phy_type = "ulpi"; status = "okay"; };