/* * Copyright (C) 2009 Eric Benard, Eukrea Electromatique * Based on pcm038.c which is : * Copyright (C) 2007 Sascha Hauer, Pengutronix * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static struct device_d cfi_dev = { .name = "cfi_flash", .map_base = 0xC0000000, .size = 64 * 1024 * 1024, }; static struct memory_platform_data ram_pdata = { .name = "ram0", .flags = DEVFS_RDWR, }; static struct device_d sdram_dev = { .name = "mem", .map_base = 0xa0000000, .size = 128 * 1024 * 1024, .platform_data = &ram_pdata, }; static struct fec_platform_data fec_info = { .xcv_type = MII100, .phy_addr = 1, }; static struct device_d fec_dev = { .name = "fec_imx", .map_base = 0x1002b000, .platform_data = &fec_info, }; struct imx_nand_platform_data nand_info = { .width = 1, .hw_ecc = 1, .is2k = 1, }; static struct device_d nand_dev = { .name = "imx_nand", .map_base = 0xd8000000, .platform_data = &nand_info, }; static int eukrea_cpuimx27_devices_init(void) { char *envdev = "no"; int i; unsigned int mode[] = { PD0_AIN_FEC_TXD0, PD1_AIN_FEC_TXD1, PD2_AIN_FEC_TXD2, PD3_AIN_FEC_TXD3, PD4_AOUT_FEC_RX_ER, PD5_AOUT_FEC_RXD1, PD6_AOUT_FEC_RXD2, PD7_AOUT_FEC_RXD3, PD8_AF_FEC_MDIO, PD9_AIN_FEC_MDC | GPIO_PUEN, PD10_AOUT_FEC_CRS, PD11_AOUT_FEC_TX_CLK, PD12_AOUT_FEC_RXD0, PD13_AOUT_FEC_RX_DV, PD14_AOUT_FEC_CLR, PD15_AOUT_FEC_COL, PD16_AIN_FEC_TX_ER, PF23_AIN_FEC_TX_EN, PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, PE14_PF_UART1_CTS, PE15_PF_UART1_RTS, }; /* configure 16 bit nor flash on cs0 */ CS0U = 0x0000CC03; CS0L = 0xa0330D01; CS0A = 0x00220800; /* configure 8 bit UART on cs3 */ FMCR &= ~0x2; CS3U = 0x0000DCF6; CS3L = 0x444A4541; CS3A = 0x44443302; /* initizalize gpios */ for (i = 0; i < ARRAY_SIZE(mode); i++) imx_gpio_mode(mode[i]); register_device(&cfi_dev); register_device(&nand_dev); register_device(&sdram_dev); devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self0"); devfs_add_partition("nor0", 0x40000, 0x20000, PARTITION_FIXED, "env0"); protect_file("/dev/env0", 1); envdev = "NOR"; printf("Using environment in %s Flash\n", envdev); armlinux_add_dram(&sdram_dev); armlinux_set_bootparams((void *)0xa0000100); armlinux_set_architecture(MACH_TYPE_CPUIMX27); return 0; } device_initcall(eukrea_cpuimx27_devices_init); static struct device_d eukrea_cpuimx27_serial_device = { .name = "imx_serial", .map_base = IMX_UART1_BASE, .size = 4096, }; static int eukrea_cpuimx27_console_init(void) { register_device(&eukrea_cpuimx27_serial_device); return 0; } console_initcall(eukrea_cpuimx27_console_init); static int eukrea_cpuimx27_late_init(void) { console_flush(); register_device(&fec_dev); return 0; } late_initcall(eukrea_cpuimx27_late_init); #ifdef CONFIG_NAND_IMX_BOOT void __bare_init nand_boot(void) { int pagesize = 512; switch ((GPCR & GPCR_BOOT_MASK) >> GPCR_BOOT_SHIFT) { case GPCR_BOOT_8BIT_NAND_2k: case GPCR_BOOT_16BIT_NAND_2k: pagesize = 2048; } imx_nand_load_image((void *)TEXT_BASE, 256 * 1024, pagesize, 16384); } #endif