/* * (C) Copyright 2006 Freescale Semiconductor, Inc. * * (C) Copyright 2003,Motorola Inc. * Xianghua Xiao * Adapted for Motorola 85xx chip. * * (C) Copyright 2003 * Gleb Natapov * Some bits are taken from linux driver writen by adrian@humboldt.co.uk * * Hardware I2C driver for MPC107 PCI bridge. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * * Change log: * * 20050101: Eran Liberty (liberty@freescale.com) * Initial file creating (porting from 85XX & 8260) * 20060601: Dave Liu (daveliu@freescale.com) * Unified variable names for mpc83xx */ #include #include #include #ifdef CONFIG_HARD_I2C #include #include DECLARE_GLOBAL_DATA_PTR; /* Initialize the bus pointer to whatever one the SPD EEPROM is on. * Default is bus 1. This is necessary because the DDR initialization * runs from ROM, and we can't switch buses because we can't modify * the i2c_dev variable. Everything gets straightened out once i2c_init * is called from RAM. */ #ifndef CFG_SPD_BUS_NUM #define CFG_SPD_BUS_NUM 1 #endif static unsigned int i2c_bus_num = CFG_SPD_BUS_NUM; #if CFG_SPD_BUS_NUM == 1 static volatile i2c_t *i2c_dev = I2C_1; #else static volatile i2c_t *i2c_dev = I2C_2; #endif static int i2c_bus_speed[2] = {0, 0}; /* * Map the frequency divider to the FDR. This data is taken from table 17-5 * of the MPC8349EA reference manual, with duplicates removed. */ static struct { unsigned int divider; u8 fdr; } i2c_speed_map[] = { {0, 0x20}, {256, 0x20}, {288, 0x21}, {320, 0x22}, {352, 0x23}, {384, 0x24}, {416, 0x01}, {448, 0x25}, {480, 0x02}, {512, 0x26}, {576, 0x27}, {640, 0x28}, {704, 0x05}, {768, 0x29}, {832, 0x06}, {896, 0x2A}, {1024, 0x2B}, {1152, 0x08}, {1280, 0x2C}, {1536, 0x2D}, {1792, 0x2E}, {1920, 0x0B}, {2048, 0x2F}, {2304, 0x0C}, {2560, 0x30}, {3072, 0x31}, {3584, 0x32}, {3840, 0x0F}, {4096, 0x33}, {4608, 0x10}, {5120, 0x34}, {6144, 0x35}, {7168, 0x36}, {7680, 0x13}, {8192, 0x37}, {9216, 0x14}, {10240, 0x38}, {12288, 0x39}, {14336, 0x3A}, {15360, 0x17}, {16384, 0x3B}, {18432, 0x18}, {20480, 0x3C}, {24576, 0x3D}, {28672, 0x3E}, {30720, 0x1B}, {32768, 0x3F}, {36864, 0x1C}, {40960, 0x1D}, {49152, 0x1E}, {61440, 0x1F}, {-1, 0x1F} }; #define NUM_I2C_SPEEDS (sizeof(i2c_speed_map) / sizeof(i2c_speed_map[0])) static int set_speed(unsigned int speed) { unsigned long i2c_clk; unsigned int divider, i; u8 fdr = 0x3F; i2c_clk = (i2c_bus_num == 2) ? gd->i2c2_clk : gd->i2c1_clk; divider = i2c_clk / speed; /* Scan i2c_speed_map[] for the closest matching divider.*/ for (i = 0; i < NUM_I2C_SPEEDS-1; i++) { /* Locate our divider in between two entries in i2c_speed_map[] */ if ((divider >= i2c_speed_map[i].divider) && (divider <= i2c_speed_map[i+1].divider)) { /* Which one is closer? */ if ((divider - i2c_speed_map[i].divider) < (i2c_speed_map[i+1].divider - divider)) { fdr = i2c_speed_map[i].fdr; } else { fdr = i2c_speed_map[i+1].fdr; } break; } } writeb(fdr, &i2c_dev->fdr); i2c_bus_speed[i2c_bus_num - 1] = speed; return 0; } static void _i2c_init(int speed, int slaveadd) { /* stop I2C controller */ writeb(0x00 , &i2c_dev->cr); /* set clock */ set_speed(speed); /* set default filter */ writeb(IC2_FDR,&i2c_dev->dfsrr); /* write slave address */ writeb(slaveadd, &i2c_dev->adr); /* clear status register */ writeb(I2C_CR_MTX, &i2c_dev->sr); /* start I2C controller */ writeb(I2C_CR_MEN, &i2c_dev->cr); } void i2c_init(int speed, int slaveadd) { /* Set both interfaces to the same speed and slave address */ /* Note: This function gets called twice - before and after * relocation to RAM. The first time it's called, we are unable * to change buses, so whichever one 'i2c_dev' was initialized to * gets set twice. When run from RAM both buses get set properly */ i2c_set_bus_num(1); _i2c_init(speed, slaveadd); #ifdef CFG_I2C2_OFFSET i2c_set_bus_num(2); _i2c_init(speed, slaveadd); i2c_set_bus_num(1); #endif /* CFG_I2C2_OFFSET */ } static __inline__ int i2c_wait4bus (void) { ulong timeval = get_timer (0); while (readb(&i2c_dev->sr) & I2C_SR_MBB) { if (get_timer (timeval) > I2C_TIMEOUT) { return -1; } } return 0; } static __inline__ int i2c_wait (int write) { u32 csr; ulong timeval = get_timer(0); do { csr = readb(&i2c_dev->sr); if (!(csr & I2C_SR_MIF)) continue; writeb(0x0, &i2c_dev->sr); if (csr & I2C_SR_MAL) { debug("i2c_wait: MAL\n"); return -1; } if (!(csr & I2C_SR_MCF)) { debug("i2c_wait: unfinished\n"); return -1; } if (write == I2C_WRITE && (csr & I2C_SR_RXAK)) { debug("i2c_wait: No RXACK\n"); return -1; } return 0; } while (get_timer (timeval) < I2C_TIMEOUT); debug("i2c_wait: timed out\n"); return -1; } static __inline__ int i2c_write_addr (u8 dev, u8 dir, int rsta) { writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX | (rsta?I2C_CR_RSTA:0), &i2c_dev->cr); writeb((dev << 1) | dir, &i2c_dev->dr); if (i2c_wait (I2C_WRITE) < 0) return 0; return 1; } static __inline__ int __i2c_write (u8 *data, int length) { int i; writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX, &i2c_dev->cr); for (i=0; i < length; i++) { writeb(data[i], &i2c_dev->dr); if (i2c_wait (I2C_WRITE) < 0) break; } return i; } static __inline__ int __i2c_read (u8 *data, int length) { int i; writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0), &i2c_dev->cr); /* dummy read */ readb(&i2c_dev->dr); for (i=0; i < length; i++) { if (i2c_wait (I2C_READ) < 0) break; /* Generate ack on last next to last byte */ if (i == length - 2) writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK, &i2c_dev->cr); /* Generate stop on last byte */ if (i == length - 1) writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev->cr); data[i] = readb(&i2c_dev->dr); } return i; } int i2c_read (u8 dev, uint addr, int alen, u8 *data, int length) { int i = 0; u8 *a = (u8*)&addr; if (i2c_wait4bus () < 0) goto exit; if (i2c_write_addr (dev, I2C_WRITE, 0) == 0) goto exit; if (__i2c_write (&a[4 - alen], alen) != alen) goto exit; if (i2c_write_addr (dev, I2C_READ, 1) == 0) goto exit; i = __i2c_read (data, length); exit: writeb(I2C_CR_MEN, &i2c_dev->cr); return !(i == length); } int i2c_write (u8 dev, uint addr, int alen, u8 *data, int length) { int i = 0; u8 *a = (u8*)&addr; if (i2c_wait4bus () < 0) goto exit; if (i2c_write_addr (dev, I2C_WRITE, 0) == 0) goto exit; if (__i2c_write (&a[4 - alen], alen) != alen) goto exit; i = __i2c_write (data, length); exit: writeb(I2C_CR_MEN, &i2c_dev->cr); return !(i == length); } int i2c_probe (uchar chip) { int tmp; /* * Try to read the first location of the chip. The underlying * driver doesn't appear to support sending just the chip address * and looking for an back. */ udelay(10000); return i2c_read (chip, 0, 1, (uchar *)&tmp, 1); } uchar i2c_reg_read (uchar i2c_addr, uchar reg) { uchar buf[1]; i2c_read (i2c_addr, reg, 1, buf, 1); return (buf[0]); } void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val) { i2c_write (i2c_addr, reg, 1, &val, 1); } int i2c_set_bus_num(unsigned int bus) { if(bus == 1) { i2c_dev = I2C_1; } #ifdef CFG_I2C2_OFFSET else if(bus == 2) { i2c_dev = I2C_2; } #endif else { return -1; } i2c_bus_num = bus; return 0; } int i2c_set_bus_speed(unsigned int speed) { return set_speed(speed); } unsigned int i2c_get_bus_num(void) { return i2c_bus_num; } unsigned int i2c_get_bus_speed(void) { return i2c_bus_speed[i2c_bus_num - 1]; } #endif /* CONFIG_HARD_I2C */