.. |
include/mach
|
Add DMO RealQ7 board support
|
2013-03-11 09:19:55 +01:00 |
Kconfig
|
Add DMO RealQ7 board support
|
2013-03-11 09:19:55 +01:00 |
Makefile
|
ARM i.MX6: Add mmdc calibration support
|
2013-03-11 09:16:41 +01:00 |
boot.c
|
ARM i.MX6: save boot location
|
2012-12-06 13:43:29 +01:00 |
clk-imx1.c
|
ARM i.MX: Add devicetree support to the ccm drivers
|
2012-10-05 12:34:19 +02:00 |
clk-imx5.c
|
i.MX53 i2c, add support for third i2c interface
|
2013-02-11 20:56:19 +01:00 |
clk-imx6.c
|
ARM i.MX6: Add usbphy clocks
|
2013-01-20 11:08:47 +01:00 |
clk-imx21.c
|
i.MX21/27: don't enable lcd bus clocks too early
|
2013-01-17 19:02:42 +01:00 |
clk-imx25.c
|
i.MX21/27: don't enable lcd bus clocks too early
|
2013-01-17 19:02:42 +01:00 |
clk-imx27.c
|
i.MX27: fix shift amount for PCCR1_PERCLK3_EN
|
2013-01-17 19:02:42 +01:00 |
clk-imx31.c
|
ARM i.MX: Add devicetree support to the ccm drivers
|
2012-10-05 12:34:19 +02:00 |
clk-imx35.c
|
ARM i.MX35: Let MAX clk be in run-mode-on
|
2013-02-26 11:00:30 +01:00 |
clk-pfd.c
|
ARM i.MX: initial clk support
|
2012-10-04 15:19:55 +02:00 |
clk-pllv1.c
|
ARM i.MX: initial clk support
|
2012-10-04 15:19:55 +02:00 |
clk-pllv2.c
|
ARM i.MX: get rid of imx-regs.h
|
2012-10-17 20:22:02 +02:00 |
clk-pllv3.c
|
ARM i.MX6 clk: remove gate_mask from pllv3
|
2012-12-06 12:59:27 +01:00 |
clk.h
|
ARM i.MX6 clk: remove gate_mask from pllv3
|
2012-12-06 12:59:27 +01:00 |
clocksource.c
|
ARM i.MX: get rid of imx-regs.h
|
2012-10-17 20:22:02 +02:00 |
devices.c
|
ARM i.MX27: Add USB device functions
|
2012-12-13 22:18:47 +01:00 |
esdctl-v4.c
|
ARM i.MX: add esdctl-v4 support
|
2012-12-06 13:43:10 +01:00 |
esdctl.c
|
ARM: i.MX: Replace numbers with predefined constants in several places
|
2013-02-26 15:08:36 +01:00 |
external-nand-boot.c
|
ARM i.MX: Fix booting from NOR when external nand boot is enabled
|
2013-02-26 11:00:25 +01:00 |
gpio.c
|
ARM i.MX: get rid of imx-regs.h
|
2012-10-17 20:22:02 +02:00 |
iim.c
|
switch all platform_bus device/driver registering to platform_driver/device_register
|
2012-10-04 15:19:12 +02:00 |
imx-bbu-internal.c
|
Merge branch 'for-next/imx'
|
2012-12-07 16:43:12 +01:00 |
imx.c
|
ARM i.MX: Print silicon revision in common place
|
2012-10-15 19:44:36 +02:00 |
imx1.c
|
ARM i.MX: register esdctl controller device
|
2012-12-06 13:43:09 +01:00 |
imx5.c
|
ARM i.MX5: prepare to add a imx51_lowlevel_init
|
2012-01-02 15:00:27 +01:00 |
imx6-mmdc.c
|
ARM i.MX6: Add mmdc calibration support
|
2013-03-11 09:16:41 +01:00 |
imx6.c
|
ARM: i.MX: Replace numbers with predefined constants in several places
|
2013-02-26 15:08:36 +01:00 |
imx21.c
|
ARM i.MX21: Fix device names for gpio
|
2013-02-15 16:43:03 +01:00 |
imx25.c
|
ARM i.MX25: Add missing device registration for the iomux
|
2013-01-18 11:24:10 +01:00 |
imx27.c
|
ARM: i.MX27: Use DEVICE_ID_SINGLE for IIM, CCM and ESDCTL
|
2013-02-25 08:57:40 +01:00 |
imx31.c
|
ARM i.MX31: Add USB device functions
|
2012-12-13 22:18:47 +01:00 |
imx35.c
|
ARM i.MX35: Fix device names for gpio
|
2013-02-15 16:41:43 +01:00 |
imx51.c
|
ARM i.MX51: Add USB device functions
|
2012-12-13 22:18:47 +01:00 |
imx53.c
|
ARM: i.MX: Replace numbers with predefined constants in several places
|
2013-02-26 15:08:36 +01:00 |
iomux-v1.c
|
ARM i.MX iomux-v1: Add separate header file
|
2012-10-05 20:03:04 +02:00 |
iomux-v2.c
|
ARM i.MX31: sync iomux with kernel
|
2012-12-12 21:53:58 +01:00 |
iomux-v3.c
|
ARM i.MX: get rid of imx-regs.h
|
2012-10-17 20:22:02 +02:00 |
nand.c
|
ARM i.MX: get rid of imx-regs.h
|
2012-10-17 20:22:02 +02:00 |
usb-imx6.c
|
ARM i.MX6: Fix usb phy base addresses
|
2013-01-20 11:07:50 +01:00 |