The OF code for parsing bus-width would only add the specified width to those the driver might have already set capability flags for. Because of this, if the driver had set 8 or 4 bit width, it wasn't possible for the DT to specify that fewer pins were used on the board and a smaller width was necessary. Change this so the width in the DT overrides whatever widths the driver says it supports. There is no reason to have an incorrect device tree and it makes far more sense for the DT to override the driver default than for the driver default to override the DT. The widths the driver puts in host_caps before calling mci_of_parse() are considered the default if the DT doesn't specify bus-width. This should cause the least amount of change to existing boards, as despite a comment that no bus-width meant to use 1 bit, using the driver default is what was really happening. Unfortunately, half of existing drivers default to the largest width they support while the other half default to the smallest. Boards should just stick the width in the device tree. Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
493 lines
18 KiB
C
493 lines
18 KiB
C
/*
|
|
* (C) Copyright 2010 Juergen Beisert, Pengutronix
|
|
*
|
|
* This code is partially based on u-boot code:
|
|
*
|
|
* Copyright 2008, Freescale Semiconductor, Inc
|
|
* Andy Fleming
|
|
*
|
|
* Based (loosely) on the Linux code
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#ifndef _MCI_H_
|
|
#define _MCI_H_
|
|
|
|
#include <linux/list.h>
|
|
#include <block.h>
|
|
#include <regulator.h>
|
|
|
|
/* Firmware revisions for SD cards */
|
|
#define SD_VERSION_SD 0x20000
|
|
#define SD_VERSION_2 (SD_VERSION_SD | 0x200)
|
|
#define SD_VERSION_1_0 (SD_VERSION_SD | 0x100)
|
|
#define SD_VERSION_1_10 (SD_VERSION_SD | 0x1a0)
|
|
|
|
/* Firmware revisions for MMC cards */
|
|
#define MMC_VERSION_MMC 0x10000
|
|
#define MMC_VERSION_UNKNOWN (MMC_VERSION_MMC)
|
|
#define MMC_VERSION_1_2 (MMC_VERSION_MMC | 0x120)
|
|
#define MMC_VERSION_1_4 (MMC_VERSION_MMC | 0x140)
|
|
#define MMC_VERSION_2_2 (MMC_VERSION_MMC | 0x220)
|
|
#define MMC_VERSION_3 (MMC_VERSION_MMC | 0x300)
|
|
#define MMC_VERSION_4 (MMC_VERSION_MMC | 0x400)
|
|
#define MMC_VERSION_4_1 (MMC_VERSION_MMC | 0x410)
|
|
#define MMC_VERSION_4_2 (MMC_VERSION_MMC | 0x420)
|
|
#define MMC_VERSION_4_3 (MMC_VERSION_MMC | 0x430)
|
|
#define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x441)
|
|
#define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x450)
|
|
|
|
#define MMC_CAP_SPI (1 << 0)
|
|
#define MMC_CAP_4_BIT_DATA (1 << 1)
|
|
#define MMC_CAP_8_BIT_DATA (1 << 2)
|
|
#define MMC_CAP_SD_HIGHSPEED (1 << 3)
|
|
#define MMC_CAP_MMC_HIGHSPEED (1 << 4)
|
|
#define MMC_CAP_MMC_HIGHSPEED_52MHZ (1 << 5)
|
|
/* Mask of all caps for bus width */
|
|
#define MMC_CAP_BIT_DATA_MASK (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)
|
|
|
|
#define SD_DATA_4BIT 0x00040000
|
|
|
|
#define IS_SD(x) (x->version & SD_VERSION_SD)
|
|
|
|
#define MMC_DATA_READ 1
|
|
#define MMC_DATA_WRITE 2
|
|
|
|
/* command list */
|
|
#define MMC_CMD_GO_IDLE_STATE 0
|
|
#define MMC_CMD_SEND_OP_COND 1
|
|
#define MMC_CMD_ALL_SEND_CID 2
|
|
#define MMC_CMD_SET_RELATIVE_ADDR 3
|
|
#define MMC_CMD_SET_DSR 4
|
|
#define MMC_CMD_SWITCH 6
|
|
#define MMC_CMD_SELECT_CARD 7
|
|
#define MMC_CMD_SEND_EXT_CSD 8
|
|
#define MMC_CMD_SEND_CSD 9
|
|
#define MMC_CMD_SEND_CID 10
|
|
#define MMC_CMD_STOP_TRANSMISSION 12
|
|
#define MMC_CMD_SEND_STATUS 13
|
|
#define MMC_CMD_SET_BLOCKLEN 16
|
|
#define MMC_CMD_READ_SINGLE_BLOCK 17
|
|
#define MMC_CMD_READ_MULTIPLE_BLOCK 18
|
|
#define MMC_CMD_WRITE_SINGLE_BLOCK 24
|
|
#define MMC_CMD_WRITE_MULTIPLE_BLOCK 25
|
|
#define MMC_CMD_APP_CMD 55
|
|
#define MMC_CMD_SPI_READ_OCR 58
|
|
#define MMC_CMD_SPI_CRC_ON_OFF 59
|
|
|
|
#define SD_CMD_SEND_RELATIVE_ADDR 3
|
|
#define SD_CMD_SWITCH_FUNC 6
|
|
#define SD_CMD_SEND_IF_COND 8
|
|
|
|
#define SD_CMD_APP_SET_BUS_WIDTH 6
|
|
#define SD_CMD_APP_SEND_OP_COND 41
|
|
#define SD_CMD_APP_SEND_SCR 51
|
|
|
|
/* SCR definitions in different words */
|
|
#define SD_HIGHSPEED_BUSY 0x00020000
|
|
#define SD_HIGHSPEED_SUPPORTED 0x00020000
|
|
|
|
#define MMC_HS_TIMING 0x00000100
|
|
|
|
#define OCR_BUSY 0x80000000
|
|
/** card's response in its OCR if it is a high capacity card */
|
|
#define OCR_HCS 0x40000000
|
|
|
|
#define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */
|
|
#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */
|
|
#define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */
|
|
#define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */
|
|
#define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */
|
|
#define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */
|
|
#define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */
|
|
#define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */
|
|
#define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */
|
|
#define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */
|
|
#define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */
|
|
#define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */
|
|
#define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */
|
|
#define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */
|
|
#define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */
|
|
#define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */
|
|
#define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */
|
|
|
|
#define MMC_SWITCH_MODE_CMD_SET 0x00 /** Change the command set */
|
|
/** Set bits in EXT_CSD byte addressed by index which are 1 in value field */
|
|
#define MMC_SWITCH_MODE_SET_BITS 0x01
|
|
/** Clear bits in EXT_CSD byte addressed by index, which are 1 in value field */
|
|
#define MMC_SWITCH_MODE_CLEAR_BITS 0x02
|
|
/** Set target byte to value */
|
|
#define MMC_SWITCH_MODE_WRITE_BYTE 0x03
|
|
|
|
#define SD_SWITCH_CHECK 0
|
|
#define SD_SWITCH_SWITCH 1
|
|
|
|
/*
|
|
* EXT_CSD fields
|
|
*/
|
|
|
|
#define EXT_CSD_FLUSH_CACHE 32 /* W */
|
|
#define EXT_CSD_CACHE_CTRL 33 /* R/W */
|
|
#define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */
|
|
#define EXT_CSD_GP_SIZE_MULT 143 /* R/W */
|
|
#define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */
|
|
#define EXT_CSD_PARTITION_SUPPORT 160 /* RO */
|
|
#define EXT_CSD_HPI_MGMT 161 /* R/W */
|
|
#define EXT_CSD_RST_N_FUNCTION 162 /* R/W */
|
|
#define EXT_CSD_SANITIZE_START 165 /* W */
|
|
#define EXT_CSD_WR_REL_PARAM 166 /* RO */
|
|
#define EXT_CSD_BOOT_WP 173 /* R/W */
|
|
#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
|
|
#define EXT_CSD_PART_CONFIG 179 /* R/W */
|
|
#define EXT_CSD_ERASED_MEM_CONT 181 /* RO */
|
|
#define EXT_CSD_BUS_WIDTH 183 /* R/W */
|
|
#define EXT_CSD_HS_TIMING 185 /* R/W */
|
|
#define EXT_CSD_POWER_CLASS 187 /* R/W */
|
|
#define EXT_CSD_REV 192 /* RO */
|
|
#define EXT_CSD_STRUCTURE 194 /* RO */
|
|
#define EXT_CSD_CARD_TYPE 196 /* RO */
|
|
#define EXT_CSD_OUT_OF_INTERRUPT_TIME 198 /* RO */
|
|
#define EXT_CSD_PART_SWITCH_TIME 199 /* RO */
|
|
#define EXT_CSD_PWR_CL_52_195 200 /* RO */
|
|
#define EXT_CSD_PWR_CL_26_195 201 /* RO */
|
|
#define EXT_CSD_PWR_CL_52_360 202 /* RO */
|
|
#define EXT_CSD_PWR_CL_26_360 203 /* RO */
|
|
#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
|
|
#define EXT_CSD_S_A_TIMEOUT 217 /* RO */
|
|
#define EXT_CSD_REL_WR_SEC_C 222 /* RO */
|
|
#define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */
|
|
#define EXT_CSD_ERASE_TIMEOUT_MULT 223 /* RO */
|
|
#define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */
|
|
#define EXT_CSD_BOOT_MULT 226 /* RO */
|
|
#define EXT_CSD_SEC_TRIM_MULT 229 /* RO */
|
|
#define EXT_CSD_SEC_ERASE_MULT 230 /* RO */
|
|
#define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */
|
|
#define EXT_CSD_TRIM_MULT 232 /* RO */
|
|
#define EXT_CSD_PWR_CL_200_195 236 /* RO */
|
|
#define EXT_CSD_PWR_CL_200_360 237 /* RO */
|
|
#define EXT_CSD_PWR_CL_DDR_52_195 238 /* RO */
|
|
#define EXT_CSD_PWR_CL_DDR_52_360 239 /* RO */
|
|
#define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */
|
|
#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */
|
|
#define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */
|
|
#define EXT_CSD_HPI_FEATURES 503 /* RO */
|
|
|
|
/* Added with the 5.1 standard */
|
|
#define EXT_CSD_CMDQ_MODE_EN 15 /* RO */
|
|
#define EXT_CSD_SECURE_REMOVAL_TYPE 16 /* R/W */
|
|
#define EXT_CSD_PRODUCT_ST8_AWARENSS_ENABLEMENT 17 /* R/W */
|
|
#define EXT_CSD_MAX_PRE_LOADING_DATA_SIZE 18 /* RO, 4 bytes */
|
|
#define EXT_CSD_PRE_LOADING_DATA_SIZE 22 /* R/W, 4 bytes */
|
|
#define EXT_CSD_FFU_STATUS 26 /* RO */
|
|
#define EXT_CSD_MODE_OPERATION_CODES 29 /* W */
|
|
#define EXT_CSD_MODE_CONFIG 30 /* R/W */
|
|
#define EXT_CSD_BARRIER_CTRL 31 /* R/W */
|
|
#define EXT_CSD_PACKED_FAILURE_INDEX 35 /* RO */
|
|
#define EXT_CSD_PACKED_COMMAND_STATUS 36 /* RO */
|
|
#define EXT_CSD_CONTEXT_CONF 37 /* R/W, 15 bytes */
|
|
#define EXT_CSD_EXT_PARTITIONS_ATTRIBUTE 52 /* R/W, 2 bytes */
|
|
#define EXT_CSD_EXCEPTION_EVENTS_STATUS 54 /* RO, 2 bytes */
|
|
#define EXT_CSD_EXCEPTION_EVENTS_CTRL 56 /* R/W, 2 bytes */
|
|
#define EXT_CSD_CLASS_6_CTRL 59 /* R/W */
|
|
#define EXT_CSD_INI_TIMEOUT_EMU 60 /* RO */
|
|
#define EXT_CSD_DATA_SECTOR_SIZE 61 /* RO */
|
|
#define EXT_CSD_USE_NATIVE_SECTOR 62 /* RO */
|
|
#define EXT_CSD_NATIVE_SECTOR_SIZE 63 /* RO */
|
|
#define EXT_CSD_PROGRAM_CID_CSD_DDR_SUPPORT 130 /* R/W */
|
|
#define EXT_CSD_PERIODIC_WAKEUP 131 /* R/W/ */
|
|
#define EXT_CSD_TCASE_SUPPORT 132 /* R/W */
|
|
#define EXT_CSD_PRODUCTION_STATE_AWARENESS 133 /* R/W */
|
|
#define EXT_CSD_SEC_BAD_BLK_MGMNT 134 /* R/W */
|
|
#define EXT_CSD_ENH_START_ADDR 136 /* R/W, 4 bytes */
|
|
#define EXT_CSD_ENH_SIZE_MULT 140 /* R/W, 3 bytes */
|
|
#define EXT_CSD_PARTITION_SETTING_COMPLETED 155 /* R/W */
|
|
#define EXT_CSD_PARTITIONS_ATTRIBUTE 156 /* R/W */
|
|
#define EXT_CSD_MAX_ENH_SIZE_MULT 157 /* RO, 3 bytes */
|
|
#define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */
|
|
#define EXT_CSD_BKOPS_EN 163 /* R/W */
|
|
#define EXT_CSD_BKOPS_START 164 /* WO */
|
|
#define EXT_CSD_WR_REL_SET 167 /* R/W */
|
|
#define EXT_CSD_RPMB_SIZE_MULT 168 /* RO */
|
|
#define EXT_CSD_FW_CONFIG 169 /* R/W */
|
|
#define EXT_CSD_USER_WP 171 /* R/W */
|
|
#define EXT_CSD_BOOT_WP_STATUS 174 /* RO */
|
|
#define EXT_CSD_BOOT_BUS_CONDITIONS 177 /* R/W */
|
|
#define EXT_CSD_BOOT_CONFIG_PROT 178 /* R/W */
|
|
#define EXT_CSD_PARTITION_CONFIG 179 /* R/W */
|
|
#define EXT_CSD_STROBE_SUPPORT 184 /* RO */
|
|
#define EXT_CSD_CMD_SET_REV 189 /* R/W */
|
|
#define EXT_CSD_CMD_SET 191 /* R/W */
|
|
#define EXT_CSD_CSD_STRUCTURE 194 /* RO */
|
|
#define EXT_CSD_DEVICE_TYPE 196 /* RO */
|
|
#define EXT_CSD_DRIVER_STRENGTH 197 /* RO */
|
|
#define EXT_CSD_PART_SWITCH_TIME 199 /* RO */
|
|
#define EXT_CSD_PARTITION_SWITCH_TIME 199 /* RO */
|
|
#define EXT_CSD_MIN_PERF_R_4_26 205 /* RO */
|
|
#define EXT_CSD_MIN_PERF_W_4_26 206 /* RO */
|
|
#define EXT_CSD_MIN_PERF_R_8_26_4_52 207 /* RO */
|
|
#define EXT_CSD_MIN_PERF_W_8_26_4_52 208 /* RO */
|
|
#define EXT_CSD_MIN_PERF_R_8_52 209 /* RO */
|
|
#define EXT_CSD_MIN_PERF_W_8_52 210 /* RO */
|
|
#define EXT_CSD_SECURE_WP_INFO 211 /* RO */
|
|
#define EXT_CSD_SEC_COUNT 212 /* RO, 4 bytes */
|
|
#define EXT_CSD_SLEEP_NOTIFICATION_TIME 216 /* RO */
|
|
#define EXT_CSD_PRODUCTION_ST8_AWARENSS_TIMEOUT 218 /* RO */
|
|
#define EXT_CSD_S_C_VCCQ 219 /* RO */
|
|
#define EXT_CSD_S_C_VCC 220 /* RO */
|
|
#define EXT_CSD_ACC_SIZE 225 /* RO */
|
|
#define EXT_CSD_BOOT_SIZE_MULT 226 /* RO */
|
|
#define EXT_CSD_BOOT_INFO 228 /* RO */
|
|
#define EXT_CSD_MIN_PERF_DDR_R_8_52 234 /* RO */
|
|
#define EXT_CSD_MIN_PERF_DDR_W_8_52 235 /* RO */
|
|
#define EXT_CSD_CACHE_FLUSH_POLICY 240 /* RO */
|
|
#define EXT_CSD_INI_TIMEOUT_AP 241 /* RO */
|
|
#define EXT_CSD_CORRECTLY_PRG_SECTORS_NUM 242 /* RO, 4 bytes */
|
|
#define EXT_CSD_BKOPS_STATUS 246 /* RO */
|
|
#define EXT_CSD_FIRMWARE_VERSION 254 /* RO, 8 bytes */
|
|
#define EXT_CSD_DEVICE_VERSION 262 /* RO, 2 bytes */
|
|
#define EXT_CSD_OPTIMAL_TRIM_UNIT_SIZE 264 /* RO */
|
|
#define EXT_CSD_OPTIMAL_WRITE_SIZE 265 /* RO */
|
|
#define EXT_CSD_OPTIMAL_READ_SIZE 266 /* RO */
|
|
#define EXT_CSD_PRE_EOL_INFO 267 /* RO */
|
|
#define EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A 268 /* RO */
|
|
#define EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B 269 /* RO */
|
|
#define EXT_CSD_NMBR_OF_FW_SCTRS_CRRCTLY_PRGRMD 302 /* RO, 4 bytes */
|
|
#define EXT_CSD_CMDQ_DEPTH 307 /* RO */
|
|
#define EXT_CSD_CMDQ_SUPPORT 308 /* RO */
|
|
#define EXT_CSD_BARRIER_SUPPORT 486 /* RO */
|
|
#define EXT_CSD_FFU_ARG 487 /* RO, 4 bytes */
|
|
#define EXT_CSD_OPERATION_CODES_TIMEOUT 491 /* RO */
|
|
#define EXT_CSD_FFU_FEATURES 492 /* RO */
|
|
#define EXT_CSD_SUPPORTED_MODES 493 /* RO */
|
|
#define EXT_CSD_EXT_SUPPORT 494 /* RO */
|
|
#define EXT_CSD_LARGE_UNIT_SIZE_M1 495 /* RO */
|
|
#define EXT_CSD_CONTEXT_CAPABILITIES 496 /* RO */
|
|
#define EXT_CSD_TAG_RES_SIZE 497 /* RO */
|
|
#define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */
|
|
#define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */
|
|
#define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */
|
|
#define EXT_CSD_MAX_PACKED_READS 501 /* RO */
|
|
#define EXT_CSD_BKOPS_SUPPORT 502 /* RO */
|
|
#define EXT_CSD_S_CMD_SET 504 /* RO */
|
|
#define EXT_CSD_EXT_SECURITY_ERR 505 /* RO */
|
|
|
|
/*
|
|
* EXT_CSD field definitions
|
|
*/
|
|
#define EXT_CSD_PART_CONFIG_ACC_MASK (0x7)
|
|
#define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1)
|
|
|
|
#define EXT_CSD_CMD_SET_NORMAL (1<<0)
|
|
#define EXT_CSD_CMD_SET_SECURE (1<<1)
|
|
#define EXT_CSD_CMD_SET_CPSECURE (1<<2)
|
|
|
|
#define EXT_CSD_CARD_TYPE_MASK 0x3f
|
|
#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */
|
|
#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */
|
|
#define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */
|
|
/* DDR mode @1.8V or 3V I/O */
|
|
#define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */
|
|
/* DDR mode @1.2V I/O */
|
|
#define EXT_CSD_CARD_TYPE_SDR_1_8V (1<<4) /* Card can run at 200MHz */
|
|
#define EXT_CSD_CARD_TYPE_SDR_1_2V (1<<5) /* Card can run at 200MHz */
|
|
/* SDR mode @1.2V I/O */
|
|
|
|
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
|
|
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
|
|
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
|
|
#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */
|
|
#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */
|
|
|
|
#define R1_ILLEGAL_COMMAND (1 << 22)
|
|
#define R1_APP_CMD (1 << 5)
|
|
|
|
#define R1_SPI_IDLE (1 << 0)
|
|
#define R1_SPI_ERASE_RESET (1 << 1)
|
|
#define R1_SPI_ILLEGAL_COMMAND (1 << 2)
|
|
#define R1_SPI_COM_CRC (1 << 3)
|
|
#define R1_SPI_ERASE_SEQ (1 << 4)
|
|
#define R1_SPI_ADDRESS (1 << 5)
|
|
#define R1_SPI_PARAMETER (1 << 6)
|
|
#define R1_SPI_ERROR (1 << 7)
|
|
|
|
/* response types */
|
|
#define MMC_RSP_PRESENT (1 << 0)
|
|
#define MMC_RSP_136 (1 << 1) /* 136 bit response */
|
|
#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
|
|
#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
|
|
#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
|
|
|
|
#define MMC_RSP_NONE (0)
|
|
#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
|
|
#define MMC_RSP_R1b (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
|
|
#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
|
|
#define MMC_RSP_R3 (MMC_RSP_PRESENT)
|
|
#define MMC_RSP_R4 (MMC_RSP_PRESENT)
|
|
#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
|
|
#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
|
|
#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
|
|
|
|
/** command information to be sent to the SD/MMC card */
|
|
struct mci_cmd {
|
|
unsigned cmdidx; /**< Command to be sent to the SD/MMC card */
|
|
unsigned resp_type; /**< Type of expected response, refer MMC_RSP_* macros */
|
|
unsigned cmdarg; /**< Command's arguments */
|
|
unsigned response[4]; /**< card's response */
|
|
};
|
|
|
|
/** data information to be used with some SD/MMC commands */
|
|
struct mci_data {
|
|
union {
|
|
uint8_t *dest;
|
|
const uint8_t *src; /**< src buffers don't get written to */
|
|
};
|
|
unsigned flags; /**< refer MMC_DATA_* to define direction */
|
|
unsigned blocks; /**< block count to handle in this command */
|
|
unsigned blocksize; /**< block size in bytes (mostly 512) */
|
|
};
|
|
|
|
struct mci_ios {
|
|
unsigned int clock; /* clock rate */
|
|
|
|
unsigned char bus_width; /* data bus width */
|
|
|
|
#define MMC_BUS_WIDTH_1 0
|
|
#define MMC_BUS_WIDTH_4 2
|
|
#define MMC_BUS_WIDTH_8 3
|
|
|
|
unsigned char timing; /* timing specification used */
|
|
|
|
#define MMC_TIMING_LEGACY 0
|
|
#define MMC_TIMING_MMC_HS 1
|
|
#define MMC_TIMING_SD_HS 2
|
|
#define MMC_TIMING_UHS_SDR12 MMC_TIMING_LEGACY
|
|
#define MMC_TIMING_UHS_SDR25 MMC_TIMING_SD_HS
|
|
#define MMC_TIMING_UHS_SDR50 3
|
|
#define MMC_TIMING_UHS_SDR104 4
|
|
#define MMC_TIMING_UHS_DDR50 5
|
|
#define MMC_TIMING_MMC_HS200 6
|
|
|
|
#define MMC_SDR_MODE 0
|
|
#define MMC_1_2V_DDR_MODE 1
|
|
#define MMC_1_8V_DDR_MODE 2
|
|
#define MMC_1_2V_SDR_MODE 3
|
|
#define MMC_1_8V_SDR_MODE 4
|
|
};
|
|
|
|
struct mci;
|
|
|
|
/** host information */
|
|
struct mci_host {
|
|
struct device_d *hw_dev; /**< the host MCI hardware device */
|
|
struct mci *mci;
|
|
const char *devname; /**< the devicename for the card, defaults to disk%d */
|
|
unsigned voltages;
|
|
unsigned host_caps; /**< Host's interface capabilities, refer MMC_VDD_* */
|
|
unsigned f_min; /**< host interface lower limit */
|
|
unsigned f_max; /**< host interface upper limit */
|
|
unsigned clock; /**< Current clock used to talk to the card */
|
|
unsigned bus_width; /**< used data bus width to the card */
|
|
unsigned max_req_size;
|
|
unsigned dsr_val; /**< optional dsr value */
|
|
int use_dsr; /**< optional dsr usage flag */
|
|
bool non_removable; /**< device is non removable */
|
|
struct regulator *supply;
|
|
|
|
/** init the host interface */
|
|
int (*init)(struct mci_host*, struct device_d*);
|
|
/** change host interface settings */
|
|
void (*set_ios)(struct mci_host*, struct mci_ios *);
|
|
/** handle a command */
|
|
int (*send_cmd)(struct mci_host*, struct mci_cmd*, struct mci_data*);
|
|
/** check if a card is inserted */
|
|
int (*card_present)(struct mci_host *);
|
|
/** check if a card is write protected */
|
|
int (*card_write_protected)(struct mci_host *);
|
|
};
|
|
|
|
#define MMC_NUM_BOOT_PARTITION 2
|
|
#define MMC_NUM_GP_PARTITION 4
|
|
#define MMC_NUM_PHY_PARTITION 6
|
|
|
|
struct mci_part {
|
|
struct block_device blk; /**< the blockdevice for the card */
|
|
struct mci *mci;
|
|
uint64_t size; /* partition size (in bytes) */
|
|
unsigned int part_cfg; /* partition type */
|
|
char *name;
|
|
unsigned int area_type;
|
|
#define MMC_BLK_DATA_AREA_MAIN (1<<0)
|
|
#define MMC_BLK_DATA_AREA_BOOT (1<<1)
|
|
#define MMC_BLK_DATA_AREA_GP (1<<2)
|
|
#define MMC_BLK_DATA_AREA_RPMB (1<<3)
|
|
};
|
|
|
|
/** MMC/SD and interface instance information */
|
|
struct mci {
|
|
struct mci_host *host; /**< the host for this card */
|
|
struct device_d dev; /**< the device for our disk (mcix) */
|
|
unsigned version;
|
|
/** != 0 when a high capacity card is connected (OCR -> OCR_HCS) */
|
|
int high_capacity;
|
|
unsigned card_caps; /**< Card's capabilities */
|
|
unsigned ocr; /**< card's "operation condition register" */
|
|
unsigned scr[2];
|
|
unsigned csd[4]; /**< card's "card specific data register" */
|
|
unsigned cid[4]; /**< card's "card identification register" */
|
|
unsigned short rca; /* FIXME */
|
|
unsigned tran_speed; /**< Maximum transfer speed */
|
|
/** currently used data block length for read accesses */
|
|
unsigned read_bl_len;
|
|
/** currently used data block length for write accesses */
|
|
unsigned write_bl_len;
|
|
uint64_t capacity; /**< Card's data capacity in bytes */
|
|
int ready_for_use; /** true if already probed */
|
|
int dsr_imp; /**< DSR implementation state from CSD */
|
|
char *ext_csd;
|
|
int probe;
|
|
struct param_d *param_probe;
|
|
struct param_d *param_boot;
|
|
int bootpart;
|
|
|
|
struct mci_part part[MMC_NUM_PHY_PARTITION];
|
|
int nr_parts;
|
|
char *cdevname;
|
|
|
|
struct mci_part *part_curr;
|
|
u8 ext_csd_part_config;
|
|
|
|
struct list_head list; /* The list of all mci devices */
|
|
};
|
|
|
|
int mci_register(struct mci_host*);
|
|
void mci_of_parse(struct mci_host *host);
|
|
int mci_detect_card(struct mci_host *);
|
|
int mci_send_ext_csd(struct mci *mci, char *ext_csd);
|
|
int mci_switch(struct mci *mci, unsigned set, unsigned index,
|
|
unsigned value);
|
|
|
|
static inline int mmc_host_is_spi(struct mci_host *host)
|
|
{
|
|
if (IS_ENABLED(CONFIG_MCI_SPI))
|
|
return host->host_caps & MMC_CAP_SPI;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
struct mci *mci_get_device_by_name(const char *name);
|
|
|
|
#endif /* _MCI_H_ */
|