This file originates in Linux. Linux has it under include/linux/ directory since commit dccd2304cc90. Let's move it to the same place as well in barebox. This commit was generated by the following commands: find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:' git mv include/sizes.h include/linux/ Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
496 lines
14 KiB
C
496 lines
14 KiB
C
/*
|
|
* On-Chip devices setup code for the SAMA5D4 family
|
|
*
|
|
* Copyright (C) 2014 Atmel Corporation.
|
|
* Bo Shen <voice.shen@atmel.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <init.h>
|
|
#include <linux/sizes.h>
|
|
#include <gpio.h>
|
|
#include <asm/armlinux.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/board.h>
|
|
#include <mach/at91_pmc.h>
|
|
#include <mach/at91sam9x5_matrix.h>
|
|
#include <mach/at91sam9_ddrsdr.h>
|
|
#include <mach/iomux.h>
|
|
#include <mach/io.h>
|
|
#include <mach/cpu.h>
|
|
#include <i2c/i2c-gpio.h>
|
|
|
|
#include "generic.h"
|
|
|
|
void at91_add_device_sdram(u32 size)
|
|
{
|
|
if (!size)
|
|
size = at91sama5_get_ddram_size();
|
|
|
|
arm_add_mem_device("ram0", SAMA5_DDRCS, size);
|
|
add_mem_device("sram0", SAMA5D4_SRAM_BASE,
|
|
SAMA5D4_SRAM_SIZE, IORESOURCE_MEM_WRITEABLE);
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* NAND / SmartMedia
|
|
* -------------------------------------------------------------------- */
|
|
#if defined(CONFIG_NAND_ATMEL)
|
|
static struct resource nand_resources[] = {
|
|
[0] = {
|
|
.start = SAMA5D4_CHIPSELECT_3,
|
|
.end = SAMA5D4_CHIPSELECT_3 + SZ_128M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = SAMA5D4_BASE_PMECC,
|
|
.end = SAMA5D4_BASE_PMECC + 0x490 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[2] = {
|
|
.start = SAMA5D4_BASE_PMERRLOC,
|
|
.end = SAMA5D4_BASE_PMERRLOC + 0x100 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
void __init at91_add_device_nand(struct atmel_nand_data *data)
|
|
{
|
|
if (!data)
|
|
return;
|
|
|
|
at91_set_A_periph(AT91_PIN_PC5, 0); /* D0 */
|
|
at91_set_A_periph(AT91_PIN_PC6, 0); /* D1 */
|
|
at91_set_A_periph(AT91_PIN_PC7, 0); /* D2 */
|
|
at91_set_A_periph(AT91_PIN_PC8, 0); /* D3 */
|
|
at91_set_A_periph(AT91_PIN_PC9, 0); /* D4 */
|
|
at91_set_A_periph(AT91_PIN_PC10, 0); /* D5 */
|
|
at91_set_A_periph(AT91_PIN_PC11, 0); /* D6 */
|
|
at91_set_A_periph(AT91_PIN_PC12, 0); /* D7 */
|
|
at91_set_A_periph(AT91_PIN_PC13, 0); /* RE */
|
|
at91_set_A_periph(AT91_PIN_PC14, 0); /* WE */
|
|
at91_set_A_periph(AT91_PIN_PC15, 1); /* NCS */
|
|
at91_set_A_periph(AT91_PIN_PC16, 1); /* RDY */
|
|
at91_set_A_periph(AT91_PIN_PC17, 1); /* ALE */
|
|
at91_set_A_periph(AT91_PIN_PC18, 1); /* CLE */
|
|
|
|
/* enable pin */
|
|
if (gpio_is_valid(data->enable_pin))
|
|
at91_set_gpio_output(data->enable_pin, 1);
|
|
|
|
/* ready/busy pin */
|
|
if (gpio_is_valid(data->rdy_pin))
|
|
at91_set_gpio_input(data->rdy_pin, 1);
|
|
|
|
/* card detect pin */
|
|
if (gpio_is_valid(data->det_pin))
|
|
at91_set_gpio_input(data->det_pin, 1);
|
|
|
|
add_generic_device_res("atmel_nand", 0, nand_resources,
|
|
ARRAY_SIZE(nand_resources), data);
|
|
}
|
|
#else
|
|
void __init at91_add_device_nand(struct atmel_nand_data *data) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_DRIVER_NET_MACB)
|
|
void at91_add_device_eth(int id, struct macb_platform_data *data)
|
|
{
|
|
if (!data)
|
|
return;
|
|
|
|
switch (id) {
|
|
case 0:
|
|
at91_set_A_periph(AT91_PIN_PB16, 0); /* GMDC */
|
|
at91_set_A_periph(AT91_PIN_PB17, 0); /* GMDIO */
|
|
|
|
at91_set_A_periph(AT91_PIN_PB0, 0); /* GTXCK */
|
|
at91_set_A_periph(AT91_PIN_PB2, 0); /* GTXEN */
|
|
at91_set_A_periph(AT91_PIN_PB6, 0); /* GRXDV */
|
|
at91_set_A_periph(AT91_PIN_PB7, 0); /* GRXER */
|
|
|
|
switch (data->phy_interface) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
at91_set_A_periph(AT91_PIN_PB4, 0); /* GCRS */
|
|
at91_set_A_periph(AT91_PIN_PB5, 0); /* GCOL */
|
|
at91_set_A_periph(AT91_PIN_PB14, 0); /* GTX2 */
|
|
at91_set_A_periph(AT91_PIN_PB15, 0); /* GTX3 */
|
|
at91_set_A_periph(AT91_PIN_PB3, 0); /* GTXER */
|
|
at91_set_A_periph(AT91_PIN_PB1, 0); /* GRXCK */
|
|
at91_set_A_periph(AT91_PIN_PB10, 0); /* GRX2 */
|
|
at91_set_A_periph(AT91_PIN_PB11, 0); /* GRX3 */
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
at91_set_A_periph(AT91_PIN_PB12, 0); /* GTX0 */
|
|
at91_set_A_periph(AT91_PIN_PB13, 0); /* GTX1 */
|
|
at91_set_A_periph(AT91_PIN_PB8, 0); /* GRX0 */
|
|
at91_set_A_periph(AT91_PIN_PB9, 0); /* GRX1 */
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
add_generic_device("macb", id, NULL, SAMA5D4_BASE_GMAC0, SZ_16K,
|
|
IORESOURCE_MEM, data);
|
|
break;
|
|
case 1:
|
|
at91_set_B_periph(AT91_PIN_PA22, 0); /* GMDC */
|
|
at91_set_B_periph(AT91_PIN_PA23, 0); /* GMDIO */
|
|
|
|
at91_set_B_periph(AT91_PIN_PA2, 0); /* GTXCK */
|
|
at91_set_B_periph(AT91_PIN_PA4, 0); /* GTXEN */
|
|
at91_set_B_periph(AT91_PIN_PA10, 0); /* GRXDV */
|
|
at91_set_B_periph(AT91_PIN_PA11, 0); /* GRXER */
|
|
|
|
switch (data->phy_interface) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
at91_set_B_periph(AT91_PIN_PA6, 0); /* GCRS */
|
|
at91_set_B_periph(AT91_PIN_PA9, 0); /* GCOL */
|
|
at91_set_B_periph(AT91_PIN_PA20, 0); /* GTX2 */
|
|
at91_set_B_periph(AT91_PIN_PA21, 0); /* GTX3 */
|
|
at91_set_B_periph(AT91_PIN_PA5, 0); /* GTXER */
|
|
at91_set_B_periph(AT91_PIN_PA3, 0); /* GRXCK */
|
|
at91_set_B_periph(AT91_PIN_PA18, 0); /* GRX2 */
|
|
at91_set_B_periph(AT91_PIN_PA19, 0); /* GRX3 */
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
at91_set_B_periph(AT91_PIN_PA12, 0); /* GTX0 */
|
|
at91_set_B_periph(AT91_PIN_PA13, 0); /* GTX1 */
|
|
at91_set_B_periph(AT91_PIN_PA8, 0); /* GRX0 */
|
|
at91_set_B_periph(AT91_PIN_PA9, 0); /* GRX1 */
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
add_generic_device("macb", id, NULL, SAMA5D4_BASE_GMAC1, SZ_16K,
|
|
IORESOURCE_MEM, data);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
}
|
|
#else
|
|
void at91_add_device_eth(int id, struct macb_platform_data *data) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_MCI_ATMEL)
|
|
void __init at91_add_device_mci(short mmc_id,
|
|
struct atmel_mci_platform_data *data)
|
|
{
|
|
resource_size_t start = ~0;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
/* Must have at least one usable slot */
|
|
if (!data->bus_width)
|
|
return;
|
|
|
|
/* input/irq */
|
|
if (gpio_is_valid(data->detect_pin)) {
|
|
at91_set_gpio_input(data->detect_pin, 1);
|
|
at91_set_deglitch(data->detect_pin, 1);
|
|
}
|
|
|
|
if (gpio_is_valid(data->wp_pin))
|
|
at91_set_gpio_input(data->wp_pin, 1);
|
|
|
|
switch (mmc_id) {
|
|
/* MCI0 */
|
|
case 0:
|
|
start = SAMA5D4_BASE_HSMCI0;
|
|
|
|
/* CLK */
|
|
at91_set_B_periph(AT91_PIN_PC4, 0);
|
|
|
|
/* CMD */
|
|
at91_set_B_periph(AT91_PIN_PC5, 1);
|
|
|
|
/* DAT0, maybe DAT1..DAT3 */
|
|
at91_set_B_periph(AT91_PIN_PC6, 1);
|
|
switch (data->bus_width) {
|
|
case 8:
|
|
at91_set_B_periph(AT91_PIN_PC10, 1);
|
|
at91_set_B_periph(AT91_PIN_PC11, 1);
|
|
at91_set_B_periph(AT91_PIN_PC12, 1);
|
|
at91_set_B_periph(AT91_PIN_PC13, 1);
|
|
case 4:
|
|
at91_set_B_periph(AT91_PIN_PC7, 1);
|
|
at91_set_B_periph(AT91_PIN_PC8, 1);
|
|
at91_set_B_periph(AT91_PIN_PC9, 1);
|
|
};
|
|
|
|
break;
|
|
/* MCI1 */
|
|
case 1:
|
|
start = SAMA5D4_BASE_HSMCI1;
|
|
|
|
/*
|
|
* As the mci1 io internal pull down is to strong,
|
|
* which cause external pull up doesn't work, so,
|
|
* disable internal pull down.
|
|
*/
|
|
|
|
/* CLK */
|
|
at91_set_C_periph(AT91_PIN_PE18, 0);
|
|
at91_set_pulldown(AT91_PIN_PE18, 0);
|
|
|
|
/* CMD */
|
|
at91_set_C_periph(AT91_PIN_PE19, 1);
|
|
at91_set_pulldown(AT91_PIN_PE19, 0);
|
|
|
|
/* DAT0, maybe DAT1..DAT3 */
|
|
at91_set_C_periph(AT91_PIN_PE20, 1);
|
|
at91_set_pulldown(AT91_PIN_PE20, 0);
|
|
if (data->bus_width == 4) {
|
|
at91_set_C_periph(AT91_PIN_PE21, 1);
|
|
at91_set_pulldown(AT91_PIN_PE21, 0);
|
|
at91_set_C_periph(AT91_PIN_PE22, 1);
|
|
at91_set_pulldown(AT91_PIN_PE22, 0);
|
|
at91_set_C_periph(AT91_PIN_PE23, 1);
|
|
at91_set_pulldown(AT91_PIN_PE23, 0);
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
add_generic_device("atmel_mci", mmc_id, NULL, start, SZ_16K,
|
|
IORESOURCE_MEM, data);
|
|
}
|
|
#else
|
|
void __init at91_add_device_mci(short mmc_id,
|
|
struct atmel_mci_platform_data *data) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_I2C_GPIO)
|
|
static struct i2c_gpio_platform_data pdata_i2c[] = {
|
|
{
|
|
.sda_pin = AT91_PIN_PA30,
|
|
.sda_is_open_drain = 1,
|
|
.scl_pin = AT91_PIN_PA31,
|
|
.scl_is_open_drain = 1,
|
|
.udelay = 5, /* ~100 kHz */
|
|
}, {
|
|
.sda_pin = AT91_PIN_PE29,
|
|
.sda_is_open_drain = 1,
|
|
.scl_pin = AT91_PIN_PE30,
|
|
.scl_is_open_drain = 1,
|
|
.udelay = 5, /* ~100 kHz */
|
|
}, {
|
|
.sda_pin = AT91_PIN_PB29,
|
|
.sda_is_open_drain = 1,
|
|
.scl_pin = AT91_PIN_PB30,
|
|
.scl_is_open_drain = 1,
|
|
.udelay = 5, /* ~100 kHz */
|
|
}, {
|
|
.sda_pin = AT91_PIN_PC25,
|
|
.sda_is_open_drain = 1,
|
|
.scl_pin = AT91_PIN_PC26,
|
|
.scl_is_open_drain = 1,
|
|
.udelay = 5, /* ~100 kHz */
|
|
}
|
|
};
|
|
|
|
void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices,
|
|
int nr_devices)
|
|
{
|
|
struct i2c_gpio_platform_data *pdata;
|
|
|
|
if (i2c_id > ARRAY_SIZE(pdata_i2c))
|
|
return;
|
|
|
|
i2c_register_board_info(i2c_id, devices, nr_devices);
|
|
|
|
pdata = &pdata_i2c[i2c_id];
|
|
|
|
at91_set_GPIO_periph(pdata->sda_pin, 1); /* TWD (SDA) */
|
|
at91_set_multi_drive(pdata->sda_pin, 1);
|
|
|
|
at91_set_GPIO_periph(pdata->scl_pin, 1); /* TWCK (SCL) */
|
|
at91_set_multi_drive(pdata->scl_pin, 1);
|
|
|
|
add_generic_device_res("i2c-gpio", i2c_id, NULL, 0, pdata);
|
|
}
|
|
#else
|
|
void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices,
|
|
int nr_devices) {}
|
|
#endif
|
|
|
|
/* --------------------------------------------------------------------
|
|
* SPI
|
|
* -------------------------------------------------------------------- */
|
|
#if defined(CONFIG_DRIVER_SPI_ATMEL)
|
|
static unsigned spi0_standard_cs[2] = { AT91_PIN_PC3, AT91_PIN_PC4 };
|
|
static unsigned spi1_standard_cs[2] = { AT91_PIN_PB21, AT91_PIN_PB22 };
|
|
|
|
static struct at91_spi_platform_data spi_pdata[] = {
|
|
[0] = {
|
|
.chipselect = spi0_standard_cs,
|
|
.num_chipselect = ARRAY_SIZE(spi0_standard_cs),
|
|
},
|
|
[1] = {
|
|
.chipselect = spi1_standard_cs,
|
|
.num_chipselect = ARRAY_SIZE(spi1_standard_cs),
|
|
},
|
|
};
|
|
|
|
void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata)
|
|
{
|
|
int i;
|
|
int cs_pin;
|
|
resource_size_t start = ~0;
|
|
|
|
BUG_ON(spi_id > 1);
|
|
|
|
if (!pdata)
|
|
pdata = &spi_pdata[spi_id];
|
|
|
|
for (i = 0; i < pdata->num_chipselect; i++) {
|
|
cs_pin = pdata->chipselect[i];
|
|
|
|
/* enable chip-select pin */
|
|
if (gpio_is_valid(cs_pin))
|
|
at91_set_gpio_output(cs_pin, 1);
|
|
}
|
|
|
|
/* Configure SPI bus(es) */
|
|
switch (spi_id) {
|
|
case 0:
|
|
start = SAMA5D4_BASE_SPI0;
|
|
at91_set_A_periph(AT91_PIN_PC0, 0); /* SPI0_MISO */
|
|
at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI0_MOSI */
|
|
at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI0_SPCK */
|
|
break;
|
|
case 1:
|
|
start = SAMA5D4_BASE_SPI1;
|
|
at91_set_A_periph(AT91_PIN_PB18, 0); /* SPI1_MISO */
|
|
at91_set_A_periph(AT91_PIN_PB19, 0); /* SPI1_MOSI */
|
|
at91_set_A_periph(AT91_PIN_PB20, 0); /* SPI1_SPCK */
|
|
break;
|
|
}
|
|
|
|
add_generic_device("atmel_spi", spi_id, NULL, start, SZ_16K,
|
|
IORESOURCE_MEM, pdata);
|
|
}
|
|
#else
|
|
void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata) {}
|
|
#endif
|
|
|
|
/* --------------------------------------------------------------------
|
|
* LCD Controller
|
|
* -------------------------------------------------------------------- */
|
|
#if defined(CONFIG_DRIVER_VIDEO_ATMEL_HLCD)
|
|
void __init at91_add_device_lcdc(struct atmel_lcdfb_platform_data *data)
|
|
{
|
|
BUG_ON(!data);
|
|
|
|
at91_set_A_periph(AT91_PIN_PA24, 0); /* LCDPWM */
|
|
at91_set_A_periph(AT91_PIN_PA25, 0); /* LCDDISP */
|
|
at91_set_A_periph(AT91_PIN_PA26, 0); /* LCDVSYNC */
|
|
at91_set_A_periph(AT91_PIN_PA27, 0); /* LCDHSYNC */
|
|
at91_set_A_periph(AT91_PIN_PA28, 0); /* LCDDOTCK */
|
|
at91_set_A_periph(AT91_PIN_PA29, 0); /* LCDDEN */
|
|
|
|
at91_set_A_periph(AT91_PIN_PA2, 0); /* LCDD2 */
|
|
at91_set_A_periph(AT91_PIN_PA3, 0); /* LCDD3 */
|
|
at91_set_A_periph(AT91_PIN_PA4, 0); /* LCDD4 */
|
|
at91_set_A_periph(AT91_PIN_PA5, 0); /* LCDD5 */
|
|
at91_set_A_periph(AT91_PIN_PA6, 0); /* LCDD6 */
|
|
at91_set_A_periph(AT91_PIN_PA7, 0); /* LCDD7 */
|
|
|
|
at91_set_A_periph(AT91_PIN_PA10, 0); /* LCDD10 */
|
|
at91_set_A_periph(AT91_PIN_PA11, 0); /* LCDD11 */
|
|
at91_set_A_periph(AT91_PIN_PA12, 0); /* LCDD12 */
|
|
at91_set_A_periph(AT91_PIN_PA13, 0); /* LCDD13 */
|
|
at91_set_A_periph(AT91_PIN_PA14, 0); /* LCDD14 */
|
|
at91_set_A_periph(AT91_PIN_PA15, 0); /* LCDD15 */
|
|
|
|
at91_set_A_periph(AT91_PIN_PA18, 0); /* LCDD18 */
|
|
at91_set_A_periph(AT91_PIN_PA19, 0); /* LCDD19 */
|
|
at91_set_A_periph(AT91_PIN_PA20, 0); /* LCDD20 */
|
|
at91_set_A_periph(AT91_PIN_PA21, 0); /* LCDD21 */
|
|
at91_set_A_periph(AT91_PIN_PA22, 0); /* LCDD22 */
|
|
at91_set_A_periph(AT91_PIN_PA23, 0); /* LCDD23 */
|
|
|
|
add_generic_device("atmel_hlcdfb", DEVICE_ID_SINGLE, NULL,
|
|
SAMA5D4_BASE_LCDC, SZ_4K, IORESOURCE_MEM, data);
|
|
}
|
|
#else
|
|
void __init at91_add_device_lcdc(struct atmel_lcdfb_platform_data *data) {}
|
|
#endif
|
|
|
|
/* --------------------------------------------------------------------
|
|
* UART
|
|
* -------------------------------------------------------------------- */
|
|
#if defined(CONFIG_DRIVER_SERIAL_ATMEL)
|
|
resource_size_t __init at91_configure_dbgu(void)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB25, 1); /* TXD1 */
|
|
at91_set_A_periph(AT91_PIN_PB24, 0); /* RXD1 */
|
|
|
|
return SAMA5D4_BASE_DBGU;
|
|
}
|
|
|
|
resource_size_t __init at91_configure_usart0(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PD13, 1); /* TXD1 */
|
|
at91_set_A_periph(AT91_PIN_PD12, 0); /* RXD1 */
|
|
|
|
return SAMA5D4_BASE_USART0;
|
|
}
|
|
|
|
resource_size_t __init at91_configure_usart1(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PD17, 1); /* TXD1 */
|
|
at91_set_A_periph(AT91_PIN_PD16, 0); /* RXD1 */
|
|
|
|
return SAMA5D4_BASE_USART1;
|
|
}
|
|
|
|
|
|
resource_size_t __init at91_configure_usart2(unsigned pins)
|
|
{
|
|
at91_set_B_periph(AT91_PIN_PB5, 1); /* TXD1 */
|
|
at91_set_B_periph(AT91_PIN_PB4, 0); /* RXD1 */
|
|
|
|
return SAMA5D4_BASE_USART2;
|
|
}
|
|
|
|
resource_size_t __init at91_configure_usart3(unsigned pins)
|
|
{
|
|
at91_set_B_periph(AT91_PIN_PE17, 1); /* TXD1 */
|
|
at91_set_B_periph(AT91_PIN_PE16, 0); /* RXD1 */
|
|
|
|
return SAMA5D4_BASE_USART3;
|
|
}
|
|
|
|
resource_size_t __init at91_configure_usart4(unsigned pins)
|
|
{
|
|
at91_set_B_periph(AT91_PIN_PE27, 1); /* TXD1 */
|
|
at91_set_B_periph(AT91_PIN_PE26, 0); /* RXD1 */
|
|
|
|
return SAMA5D4_BASE_USART4;
|
|
}
|
|
|
|
resource_size_t __init at91_configure_usart5(unsigned pins)
|
|
{
|
|
at91_set_B_periph(AT91_PIN_PE30, 1); /* TXD1 */
|
|
at91_set_B_periph(AT91_PIN_PE29, 0); /* RXD1 */
|
|
|
|
return SAMA5D4_BASE_UART0;
|
|
}
|
|
|
|
resource_size_t __init at91_configure_usart6(unsigned pins)
|
|
{
|
|
at91_set_C_periph(AT91_PIN_PC26, 1); /* TXD1 */
|
|
at91_set_C_periph(AT91_PIN_PC25, 0); /* RXD1 */
|
|
|
|
return SAMA5D4_BASE_UART1;
|
|
}
|
|
#endif
|