Storing the boot information in the image itself and passing a pointer around between images is cumbersome and doesn't fit well with multiimage support where the pointer we pass around is already occupied by the devicetree. Do the same as U-Boot does and store the boot information at the bottom of the SRAM public stack. To maintain the compatibility between new xloaders and older barebox binaries we still pass the boot information to the next stage via pointer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
686 lines
17 KiB
C
686 lines
17 KiB
C
#include <common.h>
|
|
#include <bootsource.h>
|
|
#include <init.h>
|
|
#include <io.h>
|
|
#include <mach/omap4-clock.h>
|
|
#include <mach/omap4-silicon.h>
|
|
#include <mach/omap4-mux.h>
|
|
#include <mach/syslib.h>
|
|
#include <mach/generic.h>
|
|
#include <mach/gpmc.h>
|
|
#include <mach/omap4_rom_usb.h>
|
|
|
|
/*
|
|
* The following several lines are taken from U-Boot to support
|
|
* recognizing more revisions of OMAP4 chips.
|
|
*/
|
|
|
|
#define MIDR_CORTEX_A9_R0P1 0x410FC091
|
|
#define MIDR_CORTEX_A9_R1P2 0x411FC092
|
|
#define MIDR_CORTEX_A9_R1P3 0x411FC093
|
|
#define MIDR_CORTEX_A9_R2P10 0x412FC09A
|
|
|
|
#define CONTROL_ID_CODE 0x4A002204
|
|
|
|
#define OMAP4_CONTROL_ID_CODE_ES1_0 0x0B85202F
|
|
#define OMAP4_CONTROL_ID_CODE_ES2_0 0x1B85202F
|
|
#define OMAP4_CONTROL_ID_CODE_ES2_1 0x3B95C02F
|
|
#define OMAP4_CONTROL_ID_CODE_ES2_2 0x4B95C02F
|
|
#define OMAP4_CONTROL_ID_CODE_ES2_3 0x6B95C02F
|
|
#define OMAP4460_CONTROL_ID_CODE_ES1_0 0x0B94E02F
|
|
#define OMAP4460_CONTROL_ID_CODE_ES1_1 0x2B94E02F
|
|
|
|
/* EMIF_L3_CONFIG register value */
|
|
#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0 0x0A0000FF
|
|
#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0 0x0A300000
|
|
|
|
void __noreturn omap4_reset_cpu(unsigned long addr)
|
|
{
|
|
writel(OMAP44XX_PRM_RSTCTRL_RESET, OMAP44XX_PRM_RSTCTRL);
|
|
|
|
while (1);
|
|
}
|
|
|
|
void omap4_set_warmboot_order(u32 *device_list)
|
|
{
|
|
const u32 CH[] = {
|
|
0xCF00AA01,
|
|
0x0000000C,
|
|
(device_list[0] << 16) | 0x0000,
|
|
(device_list[2] << 16) | device_list[1],
|
|
0x0000 | device_list[3],
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000
|
|
};
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(CH); i++)
|
|
writel(CH[i], OMAP44XX_SAR_CH_START + i*sizeof(CH[0]));
|
|
writel(OMAP44XX_SAR_CH_START, OMAP44XX_SAR_CH_ADDRESS);
|
|
}
|
|
|
|
#define WATCHDOG_WSPR 0x48
|
|
#define WATCHDOG_WWPS 0x34
|
|
|
|
static void wait_for_command_complete(void)
|
|
{
|
|
int pending = 1;
|
|
|
|
do {
|
|
pending = readl(OMAP44XX_WDT2_BASE + WATCHDOG_WWPS);
|
|
} while (pending);
|
|
}
|
|
|
|
/* EMIF */
|
|
#define EMIF_MOD_ID_REV 0x0000
|
|
#define EMIF_STATUS 0x0004
|
|
#define EMIF_SDRAM_CONFIG 0x0008
|
|
#define EMIF_LPDDR2_NVM_CONFIG 0x000C
|
|
#define EMIF_SDRAM_REF_CTRL 0x0010
|
|
#define EMIF_SDRAM_REF_CTRL_SHDW 0x0014
|
|
#define EMIF_SDRAM_TIM_1 0x0018
|
|
#define EMIF_SDRAM_TIM_1_SHDW 0x001C
|
|
#define EMIF_SDRAM_TIM_2 0x0020
|
|
#define EMIF_SDRAM_TIM_2_SHDW 0x0024
|
|
#define EMIF_SDRAM_TIM_3 0x0028
|
|
#define EMIF_SDRAM_TIM_3_SHDW 0x002C
|
|
#define EMIF_LPDDR2_NVM_TIM 0x0030
|
|
#define EMIF_LPDDR2_NVM_TIM_SHDW 0x0034
|
|
#define EMIF_PWR_MGMT_CTRL 0x0038
|
|
#define EMIF_PWR_MGMT_CTRL_SHDW 0x003C
|
|
#define EMIF_LPDDR2_MODE_REG_DATA 0x0040
|
|
#define EMIF_LPDDR2_MODE_REG_CFG 0x0050
|
|
#define EMIF_L3_CONFIG 0x0054
|
|
#define EMIF_L3_CFG_VAL_1 0x0058
|
|
#define EMIF_L3_CFG_VAL_2 0x005C
|
|
#define IODFT_TLGC 0x0060
|
|
#define EMIF_PERF_CNT_1 0x0080
|
|
#define EMIF_PERF_CNT_2 0x0084
|
|
#define EMIF_PERF_CNT_CFG 0x0088
|
|
#define EMIF_PERF_CNT_SEL 0x008C
|
|
#define EMIF_PERF_CNT_TIM 0x0090
|
|
#define EMIF_READ_IDLE_CTRL 0x0098
|
|
#define EMIF_READ_IDLE_CTRL_SHDW 0x009c
|
|
#define EMIF_ZQ_CONFIG 0x00C8
|
|
#define EMIF_DDR_PHY_CTRL_1 0x00E4
|
|
#define EMIF_DDR_PHY_CTRL_1_SHDW 0x00E8
|
|
#define EMIF_DDR_PHY_CTRL_2 0x00EC
|
|
|
|
#define DMM_LISA_MAP_0 0x0040
|
|
#define DMM_LISA_MAP_1 0x0044
|
|
#define DMM_LISA_MAP_2 0x0048
|
|
#define DMM_LISA_MAP_3 0x004C
|
|
|
|
#define MR0_ADDR 0
|
|
#define MR1_ADDR 1
|
|
#define MR2_ADDR 2
|
|
#define MR4_ADDR 4
|
|
#define MR10_ADDR 10
|
|
#define MR16_ADDR 16
|
|
#define REF_EN 0x40000000
|
|
/* defines for MR1 */
|
|
#define MR1_BL4 2
|
|
#define MR1_BL8 3
|
|
#define MR1_BL16 4
|
|
|
|
#define MR1_BT_SEQ 0
|
|
#define BT_INT 1
|
|
|
|
#define MR1_WC 0
|
|
#define MR1_NWC 1
|
|
|
|
#define MR1_NWR3 1
|
|
#define MR1_NWR4 2
|
|
#define MR1_NWR5 3
|
|
#define MR1_NWR6 4
|
|
#define MR1_NWR7 5
|
|
#define MR1_NWR8 6
|
|
|
|
#define MR1_VALUE (MR1_NWR3 << 5) | (MR1_WC << 4) | (MR1_BT_SEQ << 3) \
|
|
| (MR1_BL8 << 0)
|
|
|
|
/* defines for MR2 */
|
|
#define MR2_RL3_WL1 1
|
|
#define MR2_RL4_WL2 2
|
|
#define MR2_RL5_WL2 3
|
|
#define MR2_RL6_WL3 4
|
|
|
|
/* defines for MR10 */
|
|
#define MR10_ZQINIT 0xFF
|
|
#define MR10_ZQRESET 0xC3
|
|
#define MR10_ZQCL 0xAB
|
|
#define MR10_ZQCS 0x56
|
|
|
|
|
|
/* TODO: FREQ update method is not working so shadow registers programming
|
|
* is just for same of completeness. This would be safer if auto
|
|
* trasnitions are working
|
|
*/
|
|
#define FREQ_UPDATE_EMIF
|
|
/* EMIF Needs to be configured@19.2 MHz and shadow registers
|
|
* should be programmed for new OPP.
|
|
*/
|
|
/* Elpida 2x2Gbit */
|
|
#define SDRAM_CONFIG_INIT 0x80800EB1
|
|
#define DDR_PHY_CTRL_1_INIT 0x849FFFF5
|
|
#define READ_IDLE_CTRL 0x000501FF
|
|
#define PWR_MGMT_CTRL 0x4000000f
|
|
#define PWR_MGMT_CTRL_OPP100 0x4000000f
|
|
#define ZQ_CONFIG 0x500b3215
|
|
|
|
#define CS1_MR(mr) ((mr) | 0x80000000)
|
|
|
|
static inline void delay(unsigned long loops)
|
|
{
|
|
__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
|
|
"bne 1b" : "=r" (loops) : "0"(loops));
|
|
}
|
|
|
|
int omap4_emif_config(unsigned int base, const struct ddr_regs *ddr_regs)
|
|
{
|
|
/*
|
|
* set SDRAM CONFIG register
|
|
* EMIF_SDRAM_CONFIG[31:29] REG_SDRAM_TYPE = 4 for LPDDR2-S4
|
|
* EMIF_SDRAM_CONFIG[28:27] REG_IBANK_POS = 0
|
|
* EMIF_SDRAM_CONFIG[13:10] REG_CL = 3
|
|
* EMIF_SDRAM_CONFIG[6:4] REG_IBANK = 3 - 8 banks
|
|
* EMIF_SDRAM_CONFIG[3] REG_EBANK = 0 - CS0
|
|
* EMIF_SDRAM_CONFIG[2:0] REG_PAGESIZE = 2 - 512- 9 column
|
|
* JDEC specs - S4-2Gb --8 banks -- R0-R13, C0-c8
|
|
*/
|
|
writel(readl(base + EMIF_LPDDR2_NVM_CONFIG) & 0xbfffffff,
|
|
base + EMIF_LPDDR2_NVM_CONFIG);
|
|
writel(ddr_regs->config_init, base + EMIF_SDRAM_CONFIG);
|
|
|
|
/* PHY control values */
|
|
writel(DDR_PHY_CTRL_1_INIT, base + EMIF_DDR_PHY_CTRL_1);
|
|
writel(ddr_regs->phy_ctrl_1, base + EMIF_DDR_PHY_CTRL_1_SHDW);
|
|
|
|
/*
|
|
* EMIF_READ_IDLE_CTRL
|
|
*/
|
|
writel(READ_IDLE_CTRL, base + EMIF_READ_IDLE_CTRL);
|
|
writel(READ_IDLE_CTRL, base + EMIF_READ_IDLE_CTRL);
|
|
|
|
/*
|
|
* EMIF_SDRAM_TIM_1
|
|
*/
|
|
writel(ddr_regs->tim1, base + EMIF_SDRAM_TIM_1);
|
|
writel(ddr_regs->tim1, base + EMIF_SDRAM_TIM_1_SHDW);
|
|
|
|
/*
|
|
* EMIF_SDRAM_TIM_2
|
|
*/
|
|
writel(ddr_regs->tim2, base + EMIF_SDRAM_TIM_2);
|
|
writel(ddr_regs->tim2, base + EMIF_SDRAM_TIM_2_SHDW);
|
|
|
|
/*
|
|
* EMIF_SDRAM_TIM_3
|
|
*/
|
|
writel(ddr_regs->tim3, base + EMIF_SDRAM_TIM_3);
|
|
writel(ddr_regs->tim3, base + EMIF_SDRAM_TIM_3_SHDW);
|
|
|
|
writel(ddr_regs->zq_config, base + EMIF_ZQ_CONFIG);
|
|
|
|
/*
|
|
* poll MR0 register (DAI bit)
|
|
* REG_CS[31] = 0 -- Mode register command to CS0
|
|
* REG_REFRESH_EN[30] = 1 -- Refresh enable after MRW
|
|
* REG_ADDRESS[7:0] = 00 -- Refresh enable after MRW
|
|
*/
|
|
|
|
writel(MR0_ADDR, base + EMIF_LPDDR2_MODE_REG_CFG);
|
|
|
|
while (readl(base + EMIF_LPDDR2_MODE_REG_DATA) & 1)
|
|
;
|
|
|
|
writel(CS1_MR(MR0_ADDR), base + EMIF_LPDDR2_MODE_REG_CFG);
|
|
|
|
while (readl(base + EMIF_LPDDR2_MODE_REG_DATA) & 1)
|
|
;
|
|
|
|
|
|
/* set MR10 register */
|
|
writel(MR10_ADDR, base + EMIF_LPDDR2_MODE_REG_CFG);
|
|
writel(MR10_ZQINIT, base + EMIF_LPDDR2_MODE_REG_DATA);
|
|
writel(CS1_MR(MR10_ADDR), base + EMIF_LPDDR2_MODE_REG_CFG);
|
|
writel(MR10_ZQINIT, base + EMIF_LPDDR2_MODE_REG_DATA);
|
|
|
|
/* wait for tZQINIT=1us */
|
|
delay(10);
|
|
|
|
/* set MR1 register */
|
|
writel(MR1_ADDR, base + EMIF_LPDDR2_MODE_REG_CFG);
|
|
writel(ddr_regs->mr1, base + EMIF_LPDDR2_MODE_REG_DATA);
|
|
writel(CS1_MR(MR1_ADDR), base + EMIF_LPDDR2_MODE_REG_CFG);
|
|
writel(ddr_regs->mr1, base + EMIF_LPDDR2_MODE_REG_DATA);
|
|
|
|
/* set MR2 register RL=6 for OPP100 */
|
|
writel(MR2_ADDR, base + EMIF_LPDDR2_MODE_REG_CFG);
|
|
writel(ddr_regs->mr2, base + EMIF_LPDDR2_MODE_REG_DATA);
|
|
writel(CS1_MR(MR2_ADDR), base + EMIF_LPDDR2_MODE_REG_CFG);
|
|
writel(ddr_regs->mr2, base + EMIF_LPDDR2_MODE_REG_DATA);
|
|
|
|
/* Set SDRAM CONFIG register again here with final RL-WL value */
|
|
writel(ddr_regs->config_final, base + EMIF_SDRAM_CONFIG);
|
|
writel(ddr_regs->phy_ctrl_1, base + EMIF_DDR_PHY_CTRL_1);
|
|
|
|
/*
|
|
* EMIF_SDRAM_REF_CTRL
|
|
* refresh rate = DDR_CLK / reg_refresh_rate
|
|
* 3.9 uS = (400MHz) / reg_refresh_rate
|
|
*/
|
|
writel(ddr_regs->ref_ctrl, base + EMIF_SDRAM_REF_CTRL);
|
|
writel(ddr_regs->ref_ctrl, base + EMIF_SDRAM_REF_CTRL_SHDW);
|
|
|
|
/* set MR16 register */
|
|
writel(MR16_ADDR | REF_EN, base + EMIF_LPDDR2_MODE_REG_CFG);
|
|
writel(0, base + EMIF_LPDDR2_MODE_REG_DATA);
|
|
writel(CS1_MR(MR16_ADDR | REF_EN),
|
|
base + EMIF_LPDDR2_MODE_REG_CFG);
|
|
writel(0, base + EMIF_LPDDR2_MODE_REG_DATA);
|
|
|
|
/* LPDDR2 init complete */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void reset_phy(unsigned int base)
|
|
{
|
|
unsigned int val = readl(base + IODFT_TLGC);
|
|
val |= (1 << 10);
|
|
writel(val, base + IODFT_TLGC);
|
|
}
|
|
|
|
void omap4_ddr_init(const struct ddr_regs *ddr_regs,
|
|
const struct dpll_param *core)
|
|
{
|
|
unsigned int rev = omap4_revision();
|
|
|
|
if (rev == OMAP4430_ES2_0) {
|
|
writel(0x9e9e9e9e, 0x4A100638);
|
|
writel(0x9e9e9e9e, 0x4A10063c);
|
|
writel(0x9e9e9e9e, 0x4A100640);
|
|
writel(0x9e9e9e9e, 0x4A100648);
|
|
writel(0x9e9e9e9e, 0x4A10064c);
|
|
writel(0x9e9e9e9e, 0x4A100650);
|
|
/* LPDDR2IO set to NMOS PTV */
|
|
writel(0x00ffc000, 0x4A100704);
|
|
}
|
|
|
|
/*
|
|
* DMM Configuration
|
|
*/
|
|
|
|
/* Both EMIFs 128 byte interleaved */
|
|
writel(0x80640300, OMAP44XX_DMM_BASE + DMM_LISA_MAP_0);
|
|
|
|
writel(0x00000000, OMAP44XX_DMM_BASE + DMM_LISA_MAP_2);
|
|
writel(0xFF020100, OMAP44XX_DMM_BASE + DMM_LISA_MAP_3);
|
|
|
|
if (rev >= OMAP4460_ES1_0) {
|
|
writel(0x80640300, OMAP44XX_MA_BASE + DMM_LISA_MAP_0);
|
|
|
|
writel(0x00000000, OMAP44XX_MA_BASE + DMM_LISA_MAP_2);
|
|
writel(0xFF020100, OMAP44XX_MA_BASE + DMM_LISA_MAP_3);
|
|
}
|
|
|
|
/* DDR needs to be initialised @ 19.2 MHz
|
|
* So put core DPLL in bypass mode
|
|
* Configure the Core DPLL but don't lock it
|
|
*/
|
|
omap4_configure_core_dpll_no_lock(core);
|
|
|
|
/* No IDLE: BUG in SDC */
|
|
sr32(CM_MEMIF_CLKSTCTRL, 0, 32, 0x2);
|
|
while ((readl(CM_MEMIF_CLKSTCTRL) & 0x700) != 0x700);
|
|
|
|
writel(0x0, OMAP44XX_EMIF1_BASE + EMIF_PWR_MGMT_CTRL);
|
|
writel(0x0, OMAP44XX_EMIF2_BASE + EMIF_PWR_MGMT_CTRL);
|
|
|
|
omap4_emif_config(OMAP44XX_EMIF1_BASE, ddr_regs);
|
|
omap4_emif_config(OMAP44XX_EMIF2_BASE, ddr_regs);
|
|
|
|
/* Lock Core using shadow CM_SHADOW_FREQ_CONFIG1 */
|
|
omap4_lock_core_dpll_shadow(core);
|
|
|
|
/* Set DLL_OVERRIDE = 0 */
|
|
writel(0x0, CM_DLL_CTRL);
|
|
|
|
delay(200);
|
|
|
|
/* Check for DDR PHY ready for EMIF1 & EMIF2 */
|
|
while (((readl(OMAP44XX_EMIF1_BASE + EMIF_STATUS) & 0x04) != 0x04) \
|
|
|| ((readl(OMAP44XX_EMIF2_BASE + EMIF_STATUS) & 0x04) != 0x04));
|
|
|
|
/* Reprogram the DDR PYHY Control register */
|
|
/* PHY control values */
|
|
|
|
sr32(CM_MEMIF_EMIF_1_CLKCTRL, 0, 32, 0x1);
|
|
sr32(CM_MEMIF_EMIF_2_CLKCTRL, 0, 32, 0x1);
|
|
|
|
/* Put the Core Subsystem PD to ON State */
|
|
|
|
/* No IDLE: BUG in SDC */
|
|
//sr32(CM_MEMIF_CLKSTCTRL, 0, 32, 0x2);
|
|
//while ((readl(CM_MEMIF_CLKSTCTRL) & 0x700) != 0x700);
|
|
writel(0x80000000, OMAP44XX_EMIF1_BASE + EMIF_PWR_MGMT_CTRL);
|
|
writel(0x80000000, OMAP44XX_EMIF2_BASE + EMIF_PWR_MGMT_CTRL);
|
|
|
|
if (rev >= OMAP4460_ES1_0) {
|
|
writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0,
|
|
OMAP44XX_EMIF1_BASE + EMIF_L3_CONFIG);
|
|
writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0,
|
|
OMAP44XX_EMIF2_BASE + EMIF_L3_CONFIG);
|
|
}
|
|
|
|
/*
|
|
* DMM : DMM_LISA_MAP_0(Section_0)
|
|
* [31:24] SYS_ADDR 0x80
|
|
* [22:20] SYS_SIZE 0x7 - 2Gb
|
|
* [19:18] SDRC_INTLDMM 0x1 - 128 byte
|
|
* [17:16] SDRC_ADDRSPC 0x0
|
|
* [9:8] SDRC_MAP 0x3
|
|
* [7:0] SDRC_ADDR 0X0
|
|
*/
|
|
reset_phy(OMAP44XX_EMIF1_BASE);
|
|
reset_phy(OMAP44XX_EMIF2_BASE);
|
|
|
|
writel(0, 0x80000000);
|
|
writel(0, 0x80000080);
|
|
}
|
|
|
|
void omap4_power_i2c_send(u32 r)
|
|
{
|
|
u32 val;
|
|
|
|
writel(r, OMAP44XX_PRM_VC_VAL_BYPASS);
|
|
|
|
val = readl(OMAP44XX_PRM_VC_VAL_BYPASS);
|
|
val |= 0x1000000;
|
|
writel(val, OMAP44XX_PRM_VC_VAL_BYPASS);
|
|
|
|
while (readl(OMAP44XX_PRM_VC_VAL_BYPASS) & 0x1000000)
|
|
;
|
|
|
|
val = readl(OMAP44XX_PRM_IRQSTATUS_MPU_A9);
|
|
writel(val, OMAP44XX_PRM_IRQSTATUS_MPU_A9);
|
|
}
|
|
|
|
static unsigned int cortex_a9_rev(void)
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
/* Read Main ID Register (MIDR) */
|
|
asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (i));
|
|
|
|
return i;
|
|
}
|
|
|
|
unsigned int omap4_revision(void)
|
|
{
|
|
unsigned int rev = cortex_a9_rev();
|
|
|
|
switch(rev) {
|
|
case MIDR_CORTEX_A9_R0P1:
|
|
return OMAP4430_ES1_0;
|
|
case MIDR_CORTEX_A9_R1P2:
|
|
switch (readl(CONTROL_ID_CODE)) {
|
|
case OMAP4_CONTROL_ID_CODE_ES2_0:
|
|
return OMAP4430_ES2_0;
|
|
break;
|
|
case OMAP4_CONTROL_ID_CODE_ES2_1:
|
|
return OMAP4430_ES2_1;
|
|
break;
|
|
case OMAP4_CONTROL_ID_CODE_ES2_2:
|
|
return OMAP4430_ES2_2;
|
|
break;
|
|
default:
|
|
return OMAP4430_ES2_0;
|
|
break;
|
|
}
|
|
break;
|
|
case MIDR_CORTEX_A9_R1P3:
|
|
return OMAP4430_ES2_3;
|
|
break;
|
|
case MIDR_CORTEX_A9_R2P10:
|
|
switch (readl(CONTROL_ID_CODE)) {
|
|
case OMAP4460_CONTROL_ID_CODE_ES1_1:
|
|
return OMAP4460_ES1_1;
|
|
break;
|
|
case OMAP4460_CONTROL_ID_CODE_ES1_0:
|
|
default:
|
|
return OMAP4460_ES1_0;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
return OMAP4430_SILICON_ID_INVALID;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* shutdown watchdog
|
|
*/
|
|
static int watchdog_init(void)
|
|
{
|
|
void __iomem *wd2_base = (void *)OMAP44XX_WDT2_BASE;
|
|
|
|
if (!cpu_is_omap4())
|
|
return 0;
|
|
|
|
writel(WD_UNLOCK1, wd2_base + WATCHDOG_WSPR);
|
|
wait_for_command_complete();
|
|
writel(WD_UNLOCK2, wd2_base + WATCHDOG_WSPR);
|
|
|
|
return 0;
|
|
}
|
|
late_initcall(watchdog_init);
|
|
|
|
static int omap_vector_init(void)
|
|
{
|
|
/*
|
|
* omap4 usbboot interfaces with the omap4 ROM to reuse the USB port
|
|
* used for booting.
|
|
* The ROM code uses interrupts for the transfers, so do not modify the
|
|
* interrupt vectors in this case.
|
|
*/
|
|
if (bootsource_get() != BOOTSOURCE_USB) {
|
|
__asm__ __volatile__ (
|
|
"mov r0, #0;"
|
|
"mcr p15, #0, r0, c12, c0, #0;"
|
|
:
|
|
:
|
|
: "r0"
|
|
);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap4_bootsource(void)
|
|
{
|
|
enum bootsource src;
|
|
uint32_t *omap4_bootinfo = (void *)OMAP44XX_SRAM_SCRATCH_SPACE;
|
|
|
|
switch (omap4_bootinfo[2] & 0xFF) {
|
|
case OMAP44XX_SAR_BOOT_NAND:
|
|
src = BOOTSOURCE_NAND;
|
|
break;
|
|
case OMAP44XX_SAR_BOOT_MMC1:
|
|
src = BOOTSOURCE_MMC;
|
|
break;
|
|
case OMAP44XX_SAR_BOOT_USB_1:
|
|
src = BOOTSOURCE_USB;
|
|
break;
|
|
default:
|
|
src = BOOTSOURCE_UNKNOWN;
|
|
}
|
|
|
|
bootsource_set(src);
|
|
bootsource_set_instance(0);
|
|
|
|
omap_vector_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int omap4_init(void)
|
|
{
|
|
omap_gpmc_base = (void *)OMAP44XX_GPMC_BASE;
|
|
|
|
return omap4_bootsource();
|
|
}
|
|
|
|
#define GPIO_MASK 0x1f
|
|
|
|
static void __iomem *omap4_get_gpio_base(unsigned gpio)
|
|
{
|
|
void __iomem *base;
|
|
|
|
if (gpio < 32)
|
|
base = (void *)0x4a310000;
|
|
else
|
|
base = (void *)(0x48053000 + ((gpio & ~GPIO_MASK) << 8));
|
|
|
|
return base;
|
|
}
|
|
|
|
#define I2C_SLAVE 0x12
|
|
|
|
noinline int omap4430_scale_vcores(void)
|
|
{
|
|
unsigned int rev = omap4_revision();
|
|
|
|
/* For VC bypass only VCOREx_CGF_FORCE is necessary and
|
|
* VCOREx_CFG_VOLTAGE changes can be discarded
|
|
*/
|
|
writel(0, OMAP44XX_PRM_VC_CFG_I2C_MODE);
|
|
writel(0x6026, OMAP44XX_PRM_VC_CFG_I2C_CLK);
|
|
|
|
/* set VCORE1 force VSEL
|
|
* 4430 : supplies vdd_mpu
|
|
* Setting a high voltage for Nitro mode as smart reflex is not enabled.
|
|
* We use the maximum possible value in the AVS range because the next
|
|
* higher voltage in the discrete range (code >= 0b111010) is way too
|
|
* high
|
|
*/
|
|
|
|
/* 0x55: i2c addr, 3A: ~ 1430 mvolts*/
|
|
omap4_power_i2c_send((0x3A55 << 8) | I2C_SLAVE);
|
|
|
|
/* FIXME: set VCORE2 force VSEL, Check the reset value */
|
|
omap4_power_i2c_send((0x295B << 8) | I2C_SLAVE);
|
|
|
|
/* set VCORE3 force VSEL */
|
|
switch (rev) {
|
|
case OMAP4430_ES2_0:
|
|
omap4_power_i2c_send((0x2961 << 8) | I2C_SLAVE);
|
|
break;
|
|
case OMAP4430_ES2_1:
|
|
omap4_power_i2c_send((0x2A61 << 8) | I2C_SLAVE);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
noinline int omap4460_scale_vcores(unsigned vsel0_pin, unsigned volt_mv)
|
|
{
|
|
void __iomem *base;
|
|
u32 val = 0;
|
|
|
|
/* For VC bypass only VCOREx_CGF_FORCE is necessary and
|
|
* VCOREx_CFG_VOLTAGE changes can be discarded
|
|
*/
|
|
writel(0, OMAP44XX_PRM_VC_CFG_I2C_MODE);
|
|
writel(0x6026, OMAP44XX_PRM_VC_CFG_I2C_CLK);
|
|
|
|
/* TPS - supplies vdd_mpu on 4460
|
|
* Setup SET1 and don't touch SET0 it acts as boot voltage
|
|
* source after reset.
|
|
*/
|
|
|
|
omap4_do_scale_tps62361(TPS62361_REG_ADDR_SET1, volt_mv);
|
|
|
|
/*
|
|
* Select SET1 in TPS62361:
|
|
* VSEL1 is grounded on board. So the following selects
|
|
* VSEL1 = 0 and VSEL0 = 1
|
|
*/
|
|
base = omap4_get_gpio_base(vsel0_pin);
|
|
|
|
val = 1 << (vsel0_pin & GPIO_MASK);
|
|
writel(val, base + 0x190);
|
|
|
|
val = readl(base + 0x134);
|
|
val &= ~(1 << (vsel0_pin & GPIO_MASK));
|
|
writel(val, base + 0x134);
|
|
|
|
val = 1 << (vsel0_pin & GPIO_MASK);
|
|
writel(val, base + 0x194);
|
|
|
|
/* set VCORE1 force VSEL
|
|
* 4460 : supplies vdd_core
|
|
*/
|
|
|
|
/* 0x55: i2c addr, 28: ~ 1200 mvolts*/
|
|
omap4_power_i2c_send((0x2855 << 8) | I2C_SLAVE);
|
|
|
|
/* FIXME: set VCORE2 force VSEL, Check the reset value */
|
|
omap4_power_i2c_send((0x295B << 8) | I2C_SLAVE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void omap4_do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
|
|
{
|
|
int i;
|
|
struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
|
|
|
|
for (i = 0; i < size; i++, pad++)
|
|
writew(pad->val, base + pad->offset);
|
|
}
|
|
|
|
/* GPMC timing for OMAP4 nand device */
|
|
const struct gpmc_config omap4_nand_cfg = {
|
|
.cfg = {
|
|
0x00000800, /* CONF1 */
|
|
0x00050500, /* CONF2 */
|
|
0x00040400, /* CONF3 */
|
|
0x03000300, /* CONF4 */
|
|
0x00050808, /* CONF5 */
|
|
0x00000000, /* CONF6 */
|
|
},
|
|
/* GPMC address map as small as possible */
|
|
.base = 0x28000000,
|
|
.size = GPMC_SIZE_16M,
|
|
};
|
|
|
|
static int omap4_gpio_init(void)
|
|
{
|
|
add_generic_device("omap-gpio", 0, NULL, OMAP44XX_GPIO1_BASE,
|
|
0xf00, IORESOURCE_MEM, NULL);
|
|
add_generic_device("omap-gpio", 1, NULL, OMAP44XX_GPIO2_BASE,
|
|
0xf00, IORESOURCE_MEM, NULL);
|
|
add_generic_device("omap-gpio", 2, NULL, OMAP44XX_GPIO3_BASE,
|
|
0xf00, IORESOURCE_MEM, NULL);
|
|
add_generic_device("omap-gpio", 3, NULL, OMAP44XX_GPIO4_BASE,
|
|
0xf00, IORESOURCE_MEM, NULL);
|
|
add_generic_device("omap-gpio", 4, NULL, OMAP44XX_GPIO5_BASE,
|
|
0xf00, IORESOURCE_MEM, NULL);
|
|
add_generic_device("omap-gpio", 5, NULL, OMAP44XX_GPIO6_BASE,
|
|
0xf00, IORESOURCE_MEM, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int omap4_devices_init(void)
|
|
{
|
|
return omap4_gpio_init();
|
|
}
|