The FSF address has changed; The FSF site says that address is Free Software Foundation 51 Franklin Street, Fifth Floor Boston, MA 02110-1301 USA (see http://www.fsf.org/about/contact/) Instead of updating it each time the address changes, just drop it completely treewide. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
289 lines
9.2 KiB
C
289 lines
9.2 KiB
C
/*
|
|
* Driver for AT91/AT32 LCD Controller
|
|
*
|
|
* Copyright (C) 2007 Atmel Corporation
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <io.h>
|
|
#include <init.h>
|
|
#include <linux/clk.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/atmel_hlcdc.h>
|
|
#include <mach/io.h>
|
|
#include <mach/cpu.h>
|
|
#include <errno.h>
|
|
#include <asm/mmu.h>
|
|
|
|
#include "atmel_lcdfb.h"
|
|
|
|
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
|
|
|
|
static void atmel_hlcdfb_stop(struct atmel_lcdfb_info *sinfo, u32 flags)
|
|
{
|
|
/* Disable DISP signal */
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_DISPDIS);
|
|
while ((lcdc_readl(sinfo, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
|
|
mdelay(1);
|
|
/* Disable synchronization */
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_SYNCDIS);
|
|
while ((lcdc_readl(sinfo, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
|
|
mdelay(1);
|
|
/* Disable pixel clock */
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_CLKDIS);
|
|
while ((lcdc_readl(sinfo, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
|
|
mdelay(1);
|
|
/* Disable PWM */
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_PWMDIS);
|
|
while ((lcdc_readl(sinfo, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
|
|
mdelay(1);
|
|
|
|
if (!(flags & ATMEL_LCDC_STOP_NOWAIT))
|
|
/* Wait for the end of DMA transfer */
|
|
while (!(lcdc_readl(sinfo, ATMEL_LCDC_BASEISR) & LCDC_BASEISR_DMA))
|
|
mdelay(10);
|
|
/*FIXME: OVL DMA? */
|
|
}
|
|
|
|
static void atmel_hlcdfb_start(struct atmel_lcdfb_info *sinfo)
|
|
{
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDEN, LCDC_LCDEN_CLKEN);
|
|
while (!(lcdc_readl(sinfo, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
|
|
mdelay(1);
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDEN, LCDC_LCDEN_SYNCEN);
|
|
while (!(lcdc_readl(sinfo, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
|
|
mdelay(1);
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDEN, LCDC_LCDEN_DISPEN);
|
|
while (!(lcdc_readl(sinfo, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
|
|
mdelay(1);
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDEN, LCDC_LCDEN_PWMEN);
|
|
while (!(lcdc_readl(sinfo, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
|
|
mdelay(1);
|
|
}
|
|
|
|
struct atmel_hlcd_dma_desc {
|
|
u32 address;
|
|
u32 control;
|
|
u32 next;
|
|
};
|
|
|
|
static void atmel_hlcdfb_update_dma(struct fb_info *info)
|
|
{
|
|
struct atmel_lcdfb_info *sinfo = info->priv;
|
|
unsigned long dma_addr;
|
|
struct atmel_hlcd_dma_desc *desc;
|
|
|
|
dma_addr = (u32)info->screen_base;
|
|
dma_addr &= ~3UL;
|
|
|
|
/* Setup the DMA descriptor, this descriptor will loop to itself */
|
|
desc = sinfo->dma_desc;
|
|
|
|
desc->address = dma_addr;
|
|
/* Disable DMA transfer interrupt & descriptor loaded interrupt. */
|
|
desc->control = LCDC_BASECTRL_ADDIEN | LCDC_BASECTRL_DSCRIEN
|
|
| LCDC_BASECTRL_DMAIEN | LCDC_BASECTRL_DFETCH;
|
|
desc->next = (u32)desc;
|
|
|
|
lcdc_writel(sinfo, ATMEL_LCDC_BASEADDR, desc->address);
|
|
lcdc_writel(sinfo, ATMEL_LCDC_BASECTRL, desc->control);
|
|
lcdc_writel(sinfo, ATMEL_LCDC_BASENEXT, desc->next);
|
|
lcdc_writel(sinfo, ATMEL_LCDC_BASECHER, LCDC_BASECHER_CHEN | LCDC_BASECHER_UPDATEEN);
|
|
}
|
|
|
|
static void atmel_hlcdfb_limit_screeninfo(struct fb_videomode *mode)
|
|
{
|
|
u32 hbpw, hfpw;
|
|
|
|
if (cpu_is_at91sam9x5()) {
|
|
hbpw = LCDC_LCDCFG3_HBPW;
|
|
hfpw = LCDC_LCDCFG3_HFPW;
|
|
} else {
|
|
hbpw = LCDC2_LCDCFG3_HBPW;
|
|
hfpw = LCDC2_LCDCFG3_HFPW;
|
|
}
|
|
|
|
/* Saturate vertical and horizontal timings at maximum values */
|
|
mode->vsync_len = min_t(u32, mode->vsync_len,
|
|
(LCDC_LCDCFG1_VSPW >> LCDC_LCDCFG1_VSPW_OFFSET) + 1);
|
|
mode->upper_margin = min_t(u32, mode->upper_margin,
|
|
(LCDC_LCDCFG2_VFPW >> LCDC_LCDCFG2_VFPW_OFFSET) + 1);
|
|
mode->lower_margin = min_t(u32, mode->lower_margin,
|
|
LCDC_LCDCFG2_VBPW >> LCDC_LCDCFG2_VBPW_OFFSET);
|
|
mode->right_margin = min_t(u32, mode->right_margin,
|
|
(hbpw >> LCDC_LCDCFG3_HBPW_OFFSET) + 1);
|
|
mode->hsync_len = min_t(u32, mode->hsync_len,
|
|
(LCDC_LCDCFG1_HSPW >> LCDC_LCDCFG1_HSPW_OFFSET) + 1);
|
|
mode->left_margin = min_t(u32, mode->left_margin,
|
|
(hfpw >> LCDC_LCDCFG3_HFPW_OFFSET) + 1);
|
|
}
|
|
|
|
static u32 atmel_hlcdfb_get_rgbmode(struct fb_info *info)
|
|
{
|
|
u32 value = 0;
|
|
|
|
switch (info->bits_per_pixel) {
|
|
case 1:
|
|
value = LCDC_BASECFG1_CLUTMODE_1BPP | LCDC_BASECFG1_CLUTEN;
|
|
break;
|
|
case 2:
|
|
value = LCDC_BASECFG1_CLUTMODE_2BPP | LCDC_BASECFG1_CLUTEN;
|
|
break;
|
|
case 4:
|
|
value = LCDC_BASECFG1_CLUTMODE_4BPP | LCDC_BASECFG1_CLUTEN;
|
|
break;
|
|
case 8:
|
|
value = LCDC_BASECFG1_CLUTMODE_8BPP | LCDC_BASECFG1_CLUTEN;
|
|
break;
|
|
case 12:
|
|
value = LCDC_BASECFG1_RGBMODE_12BPP_RGB_444;
|
|
break;
|
|
case 16:
|
|
if (info->transp.offset)
|
|
value = LCDC_BASECFG1_RGBMODE_16BPP_ARGB_4444;
|
|
else
|
|
value = LCDC_BASECFG1_RGBMODE_16BPP_RGB_565;
|
|
break;
|
|
case 18:
|
|
value = LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED;
|
|
break;
|
|
case 24:
|
|
value = LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED;
|
|
break;
|
|
case 32:
|
|
value = LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888;
|
|
break;
|
|
default:
|
|
dev_err(&info->dev, "Cannot set video mode for %dbpp\n",
|
|
info->bits_per_pixel);
|
|
break;
|
|
}
|
|
|
|
return value;
|
|
}
|
|
|
|
static void atmel_hlcdfb_setup_core_base(struct fb_info *info)
|
|
{
|
|
struct atmel_lcdfb_info *sinfo = info->priv;
|
|
struct atmel_lcdfb_platform_data *pdata = sinfo->pdata;
|
|
struct fb_videomode *mode = info->mode;
|
|
unsigned long value;
|
|
unsigned long clk_value_khz;
|
|
|
|
dev_dbg(&info->dev, "%s:\n", __func__);
|
|
/* Set pixel clock */
|
|
clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
|
|
|
|
value = DIV_ROUND_CLOSEST(clk_value_khz, PICOS2KHZ(mode->pixclock));
|
|
|
|
if (value < 1) {
|
|
dev_notice(&info->dev, "using system clock as pixel clock\n");
|
|
value = LCDC_LCDCFG0_CLKPWMSEL;
|
|
} else {
|
|
mode->pixclock = KHZ2PICOS(clk_value_khz / value);
|
|
dev_dbg(&info->dev, " updated pixclk: %lu KHz\n",
|
|
PICOS2KHZ(mode->pixclock));
|
|
value = value - 2;
|
|
dev_dbg(&info->dev, " * programming CLKDIV = 0x%08lx\n",
|
|
value);
|
|
value = (value << LCDC_LCDCFG0_CLKDIV_OFFSET);
|
|
}
|
|
value |= LCDC_LCDCFG0_CGDISBASE;
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDCFG0, value);
|
|
|
|
/* Initialize control register 5 */
|
|
/* In 9x5, the default_lcdcon2 will use for LCDCFG5 */
|
|
value = pdata->default_lcdcon2;
|
|
value |= (sinfo->guard_time << LCDC_LCDCFG5_GUARDTIME_OFFSET)
|
|
| LCDC_LCDCFG5_DISPDLY
|
|
| LCDC_LCDCFG5_VSPDLYS;
|
|
|
|
if (!(mode->sync & FB_SYNC_HOR_HIGH_ACT))
|
|
value |= LCDC_LCDCFG5_HSPOL;
|
|
if (!(mode->sync & FB_SYNC_VERT_HIGH_ACT))
|
|
value |= LCDC_LCDCFG5_VSPOL;
|
|
|
|
dev_dbg(&info->dev, " * LCDC_LCDCFG5 = %08lx\n", value);
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDCFG5, value);
|
|
|
|
/* Vertical & Horizontal Timing */
|
|
value = (mode->vsync_len - 1) << LCDC_LCDCFG1_VSPW_OFFSET;
|
|
value |= (mode->hsync_len - 1) << LCDC_LCDCFG1_HSPW_OFFSET;
|
|
dev_dbg(&info->dev, " * LCDC_LCDCFG1 = %08lx\n", value);
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDCFG1, value);
|
|
|
|
value = (mode->upper_margin) << LCDC_LCDCFG2_VBPW_OFFSET;
|
|
value |= (mode->lower_margin - 1) << LCDC_LCDCFG2_VFPW_OFFSET;
|
|
dev_dbg(&info->dev, " * LCDC_LCDCFG2 = %08lx\n", value);
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDCFG2, value);
|
|
|
|
value = (mode->left_margin - 1) << LCDC_LCDCFG3_HBPW_OFFSET;
|
|
value |= (mode->right_margin - 1) << LCDC_LCDCFG3_HFPW_OFFSET;
|
|
dev_dbg(&info->dev, " * LCDC_LCDCFG3 = %08lx\n", value);
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDCFG3, value);
|
|
|
|
/* Display size */
|
|
value = (mode->yres - 1) << LCDC_LCDCFG4_RPF_OFFSET;
|
|
value |= (mode->xres - 1) << LCDC_LCDCFG4_PPL_OFFSET;
|
|
dev_dbg(&info->dev, " * LCDC_LCDCFG4 = %08lx\n", value);
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDCFG4, value);
|
|
|
|
lcdc_writel(sinfo, ATMEL_LCDC_BASECFG0, LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
|
|
lcdc_writel(sinfo, ATMEL_LCDC_BASECFG1, atmel_hlcdfb_get_rgbmode(info));
|
|
lcdc_writel(sinfo, ATMEL_LCDC_BASECFG2, 0);
|
|
lcdc_writel(sinfo, ATMEL_LCDC_BASECFG3, 0); /* Default color */
|
|
lcdc_writel(sinfo, ATMEL_LCDC_BASECFG4, LCDC_BASECFG4_DMA);
|
|
|
|
/* Disable all interrupts */
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDIDR, ~0UL);
|
|
lcdc_writel(sinfo, ATMEL_LCDC_BASEIDR, ~0UL);
|
|
/* Enable BASE LAYER overflow interrupts, if want to enable DMA interrupt, also need set it at LCDC_BASECTRL reg */
|
|
lcdc_writel(sinfo, ATMEL_LCDC_BASEIER, LCDC_BASEIER_OVR);
|
|
/* FIXME: Let video-driver register a callback */
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDIER, LCDC_LCDIER_FIFOERRIE |
|
|
LCDC_LCDIER_BASEIE | LCDC_LCDIER_HEOIE);
|
|
}
|
|
|
|
|
|
static void atmel_hlcdfb_init_contrast(struct atmel_lcdfb_info *sinfo)
|
|
{
|
|
/* have some default contrast/backlight settings */
|
|
lcdc_writel(sinfo, ATMEL_LCDC_LCDCFG6, LCDC_LCDCFG6_PWMPOL |
|
|
(ATMEL_LCDC_CVAL_DEFAULT << LCDC_LCDCFG6_PWMCVAL_OFFSET));
|
|
}
|
|
|
|
struct atmel_lcdfb_devdata atmel_hlcdfb_data = {
|
|
.start = atmel_hlcdfb_start,
|
|
.stop = atmel_hlcdfb_stop,
|
|
.update_dma = atmel_hlcdfb_update_dma,
|
|
.setup_core = atmel_hlcdfb_setup_core_base,
|
|
.init_contrast = atmel_hlcdfb_init_contrast,
|
|
.limit_screeninfo = atmel_hlcdfb_limit_screeninfo,
|
|
.dma_desc_size = sizeof(struct atmel_hlcd_dma_desc),
|
|
};
|
|
|
|
static int atmel_hlcdc_probe(struct device_d *dev)
|
|
{
|
|
return atmel_lcdc_register(dev, &atmel_hlcdfb_data);
|
|
}
|
|
|
|
static struct driver_d atmel_hlcdc_driver = {
|
|
.name = "atmel_hlcdfb",
|
|
.probe = atmel_hlcdc_probe,
|
|
};
|
|
device_platform_driver(atmel_hlcdc_driver);
|