The code calculates the DDR2 SPD checksum as per JEDEC standard No 21-C Appendix X (revision 1.2) The code is based on the equivalent files from U-Boot version git-a71d45d. Signed-off-by: Renaud Barbier <renaud.barbier@ge.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
136 lines
6 KiB
C
136 lines
6 KiB
C
/*
|
|
* Copyright 2008 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* Version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef _DDR_SPD_H_
|
|
#define _DDR_SPD_H_
|
|
|
|
/*
|
|
* Format from "JEDEC Appendix X: Serial Presence Detects for DDR2 SDRAM",
|
|
* SPD Revision 1.2
|
|
*/
|
|
struct ddr2_spd_eeprom_s {
|
|
uint8_t info_size; /* 0 # bytes written into serial memory */
|
|
uint8_t chip_size; /* 1 Total # bytes of SPD memory device */
|
|
uint8_t mem_type; /* 2 Fundamental memory type */
|
|
uint8_t nrow_addr; /* 3 # of Row Addresses on this assembly */
|
|
uint8_t ncol_addr; /* 4 # of Column Addrs on this assembly */
|
|
uint8_t mod_ranks; /* 5 Number of DIMM Ranks */
|
|
uint8_t dataw; /* 6 Module Data Width */
|
|
uint8_t res_7; /* 7 Reserved */
|
|
uint8_t voltage; /* 8 Voltage intf std of this assembly */
|
|
uint8_t clk_cycle; /* 9 SDRAM Cycle time @ CL=X */
|
|
uint8_t clk_access; /* 10 SDRAM Access from Clk @ CL=X (tAC) */
|
|
uint8_t config; /* 11 DIMM Configuration type */
|
|
uint8_t refresh; /* 12 Refresh Rate/Type */
|
|
uint8_t primw; /* 13 Primary SDRAM Width */
|
|
uint8_t ecw; /* 14 Error Checking SDRAM width */
|
|
uint8_t res_15; /* 15 Reserved */
|
|
uint8_t burstl; /* 16 Burst Lengths Supported */
|
|
uint8_t nbanks; /* 17 # of Banks on Each SDRAM Device */
|
|
uint8_t cas_lat; /* 18 CAS# Latencies Supported */
|
|
uint8_t mech_char; /* 19 DIMM Mechanical Characteristics */
|
|
uint8_t dimm_type; /* 20 DIMM type information */
|
|
uint8_t mod_attr; /* 21 SDRAM Module Attributes */
|
|
uint8_t dev_attr; /* 22 SDRAM Device Attributes */
|
|
uint8_t clk_cycle2; /* 23 Min SDRAM Cycle time @ CL=X-1 */
|
|
uint8_t clk_access2; /* 24 SDRAM Access from Clk @ CL=X-1 (tAC) */
|
|
uint8_t clk_cycle3; /* 25 Min SDRAM Cycle time @ CL=X-2 */
|
|
uint8_t clk_access3; /* 26 Max Access from Clk @ CL=X-2 (tAC) */
|
|
uint8_t trp; /* 27 Min Row Precharge Time (tRP)*/
|
|
uint8_t trrd; /* 28 Min Row Active to Row Active (tRRD) */
|
|
uint8_t trcd; /* 29 Min RAS to CAS Delay (tRCD) */
|
|
uint8_t tras; /* 30 Minimum RAS Pulse Width (tRAS) */
|
|
uint8_t rank_dens; /* 31 Density of each rank on module */
|
|
uint8_t ca_setup; /* 32 Addr+Cmd Setup Time Before Clk (tIS) */
|
|
uint8_t ca_hold; /* 33 Addr+Cmd Hold Time After Clk (tIH) */
|
|
uint8_t data_setup; /* 34 Data Input Setup Time Before Strobe
|
|
(tDS) */
|
|
uint8_t data_hold; /* 35 Data Input Hold Time
|
|
After Strobe (tDH) */
|
|
uint8_t twr; /* 36 Write Recovery time tWR */
|
|
uint8_t twtr; /* 37 Int write to read delay tWTR */
|
|
uint8_t trtp; /* 38 Int read to precharge delay tRTP */
|
|
uint8_t mem_probe; /* 39 Mem analysis probe characteristics */
|
|
uint8_t trctrfc_ext; /* 40 Extensions to trc and trfc */
|
|
uint8_t trc; /* 41 Min Active to Auto refresh time tRC */
|
|
uint8_t trfc; /* 42 Min Auto to Active period tRFC */
|
|
uint8_t tckmax; /* 43 Max device cycle time tCKmax */
|
|
uint8_t tdqsq; /* 44 Max DQS to DQ skew (tDQSQ max) */
|
|
uint8_t tqhs; /* 45 Max Read DataHold skew (tQHS) */
|
|
uint8_t pll_relock; /* 46 PLL Relock time */
|
|
uint8_t Tcasemax; /* 47 Tcasemax */
|
|
uint8_t psiTAdram; /* 48 Thermal Resistance of DRAM Package
|
|
from Top (Case) to Ambient
|
|
(Psi T-A DRAM) */
|
|
uint8_t dt0_mode; /* 49 DRAM Case Temperature Rise from
|
|
Ambient due to Activate-Precharge/Mode
|
|
Bits (DT0/Mode Bits) */
|
|
uint8_t dt2n_dt2q; /* 50 DRAM Case Temperature Rise from
|
|
Ambient due to Precharge/Quiet Standby
|
|
(DT2N/DT2Q) */
|
|
uint8_t dt2p; /* 51 DRAM Case Temperature Rise from
|
|
Ambient due to Precharge Power-Down
|
|
(DT2P) */
|
|
uint8_t dt3n; /* 52 DRAM Case Temperature Rise from
|
|
Ambient due to Active Standby (DT3N) */
|
|
uint8_t dt3pfast; /* 53 DRAM Case Temperature Rise from
|
|
Ambient due to Active Power-Down with
|
|
Fast PDN Exit (DT3Pfast) */
|
|
uint8_t dt3pslow; /* 54 DRAM Case Temperature Rise from
|
|
Ambient due to Active Power-Down with
|
|
Slow PDN Exit (DT3Pslow) */
|
|
uint8_t dt4r_dt4r4w; /* 55 DRAM Case Temperature Rise from
|
|
Ambient due to Page Open Burst
|
|
Read/DT4R4W Mode Bit
|
|
(DT4R/DT4R4W Mode Bit) */
|
|
uint8_t dt5b; /* 56 DRAM Case Temperature Rise from
|
|
Ambient due to Burst Refresh (DT5B) */
|
|
uint8_t dt7; /* 57 DRAM Case Temperature Rise from
|
|
Ambient due to Bank Interleave Reads
|
|
with Auto-Precharge (DT7) */
|
|
uint8_t psiTApll; /* 58 Thermal Resistance of PLL Package
|
|
form Top (Case) to Ambient
|
|
(Psi T-A PLL) */
|
|
uint8_t psiTAreg; /* 59 Thermal Reisitance of Register
|
|
Package from Top (Case) to Ambient
|
|
(Psi T-A Register) */
|
|
uint8_t dtpllactive; /* 60 PLL Case Temperature Rise from
|
|
Ambient due to PLL Active
|
|
(DT PLL Active) */
|
|
uint8_t dtregact; /* 61 Register Case Temperature Rise from
|
|
Ambient due to Register Active/Mode
|
|
Bit (DT Register Active/Mode Bit) */
|
|
uint8_t spd_rev; /* 62 SPD Data Revision Code */
|
|
uint8_t cksum; /* 63 Checksum for bytes 0-62 */
|
|
uint8_t mid[8]; /* 64 Mfr's JEDEC ID code per JEP-106 */
|
|
uint8_t mloc; /* 72 Manufacturing Location */
|
|
uint8_t mpart[18]; /* 73 Manufacturer's Part Number */
|
|
uint8_t rev[2]; /* 91 Revision Code */
|
|
uint8_t mdate[2]; /* 93 Manufacturing Date */
|
|
uint8_t sernum[4]; /* 95 Assembly Serial Number */
|
|
uint8_t mspec[27]; /* 99-127 Manufacturer Specific Data */
|
|
|
|
};
|
|
|
|
extern uint32_t ddr2_spd_checksum_pass(const struct ddr2_spd_eeprom_s *spd);
|
|
|
|
/* * Byte 2 Fundamental Memory Types. */
|
|
#define SPD_MEMTYPE_DDR2 (0x08)
|
|
|
|
/* DIMM Type for DDR2 SPD (according to v1.3) */
|
|
#define DDR2_SPD_DIMMTYPE_RDIMM (0x01)
|
|
#define DDR2_SPD_DIMMTYPE_UDIMM (0x02)
|
|
#define DDR2_SPD_DIMMTYPE_SO_DIMM (0x04)
|
|
#define DDR2_SPD_DIMMTYPE_72B_SO_CDIMM (0x06)
|
|
#define DDR2_SPD_DIMMTYPE_72B_SO_RDIMM (0x07)
|
|
#define DDR2_SPD_DIMMTYPE_MICRO_DIMM (0x08)
|
|
#define DDR2_SPD_DIMMTYPE_MINI_RDIMM (0x10)
|
|
#define DDR2_SPD_DIMMTYPE_MINI_UDIMM (0x20)
|
|
|
|
#endif /* _DDR_SPD_H_ */
|