Since 2011 barebox' of_device_id struct uses unsigned long type for data field: struct of_device_id { char *compatible; unsigned long data; }; Almost always struct of_device_id.data field are used as pointer and need 'unsigned long' casting. E.g. see 'git grep -A 4 of_device_id drivers/' output: drivers/ata/sata-imx.c:static __maybe_unused struct of_device_id imx_sata_dt_ids[] = { drivers/ata/sata-imx.c- { drivers/ata/sata-imx.c- .compatible = "fsl,imx6q-ahci", drivers/ata/sata-imx.c- .data = (unsigned long)&data_imx6, drivers/ata/sata-imx.c- }, { Here is of_device_id struct in linux kernel v4.0: struct of_device_id { char name[32]; char type[32]; char compatible[128]; const void *data; }; Changing of_device_id.data type to 'const void *data' will increase barebox' linux kernel compatibility and decrease number of 'unsigned long' casts. Part of the patch was done using the 'coccinelle' tool with the following semantic patch: @rule1@ identifier dev; identifier type; identifier func; @@ func(...) { <... - dev_get_drvdata(dev, (unsigned long *)&type) + dev_get_drvdata(dev, (const void **)&type) ...> } @rule2@ identifier dev; identifier type; identifier func; identifier data; @@ func(...) { <... - dev_get_drvdata(dev, (unsigned long *)&type->data) + dev_get_drvdata(dev, (const void **)&type->data) ...> } Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
307 lines
7.5 KiB
C
307 lines
7.5 KiB
C
/*
|
|
* (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
#include <common.h>
|
|
#include <driver.h>
|
|
#include <init.h>
|
|
#include <malloc.h>
|
|
#include <notifier.h>
|
|
#include <io.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
|
|
#define CADENCE_UART_CONTROL 0x00
|
|
#define CADENCE_UART_MODE 0x04
|
|
#define CADENCE_UART_BAUD_GEN 0x18
|
|
#define CADENCE_UART_CHANNEL_STS 0x2C
|
|
#define CADENCE_UART_RXTXFIFO 0x30
|
|
#define CADENCE_UART_BAUD_DIV 0x34
|
|
|
|
#define CADENCE_CTRL_RXRES (1 << 0)
|
|
#define CADENCE_CTRL_TXRES (1 << 1)
|
|
#define CADENCE_CTRL_RXEN (1 << 2)
|
|
#define CADENCE_CTRL_RXDIS (1 << 3)
|
|
#define CADENCE_CTRL_TXEN (1 << 4)
|
|
#define CADENCE_CTRL_TXDIS (1 << 5)
|
|
#define CADENCE_CTRL_RSTTO (1 << 6)
|
|
#define CADENCE_CTRL_STTBRK (1 << 7)
|
|
#define CADENCE_CTRL_STPBRK (1 << 8)
|
|
|
|
#define CADENCE_MODE_CLK_REF (0 << 0)
|
|
#define CADENCE_MODE_CLK_REF_DIV (1 << 0)
|
|
#define CADENCE_MODE_CHRL_6 (3 << 1)
|
|
#define CADENCE_MODE_CHRL_7 (2 << 1)
|
|
#define CADENCE_MODE_CHRL_8 (0 << 1)
|
|
#define CADENCE_MODE_PAR_EVEN (0 << 3)
|
|
#define CADENCE_MODE_PAR_ODD (1 << 3)
|
|
#define CADENCE_MODE_PAR_SPACE (2 << 3)
|
|
#define CADENCE_MODE_PAR_MARK (3 << 3)
|
|
#define CADENCE_MODE_PAR_NONE (4 << 3)
|
|
|
|
#define CADENCE_STS_REMPTY (1 << 1)
|
|
#define CADENCE_STS_RFUL (1 << 2)
|
|
#define CADENCE_STS_TEMPTY (1 << 3)
|
|
#define CADENCE_STS_TFUL (1 << 4)
|
|
|
|
/*
|
|
* create default values for different platforms
|
|
*/
|
|
struct cadence_serial_devtype_data {
|
|
u32 ctrl;
|
|
u32 mode;
|
|
};
|
|
|
|
static struct cadence_serial_devtype_data cadence_r1p08_data = {
|
|
.ctrl = CADENCE_CTRL_RXEN | CADENCE_CTRL_TXEN,
|
|
.mode = CADENCE_MODE_CLK_REF | CADENCE_MODE_CHRL_8 | CADENCE_MODE_PAR_NONE,
|
|
};
|
|
|
|
struct cadence_serial_priv {
|
|
struct console_device cdev;
|
|
int baudrate;
|
|
struct notifier_block notify;
|
|
void __iomem *regs;
|
|
struct clk *clk;
|
|
struct cadence_serial_devtype_data *devtype;
|
|
};
|
|
|
|
static int cadence_serial_reset(struct console_device *cdev)
|
|
{
|
|
struct cadence_serial_priv *priv = container_of(cdev,
|
|
struct cadence_serial_priv, cdev);
|
|
|
|
/* Soft-Reset Tx/Rx paths */
|
|
writel(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES, priv->regs +
|
|
CADENCE_UART_CONTROL);
|
|
|
|
while (readl(priv->regs + CADENCE_UART_CONTROL) &
|
|
(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES))
|
|
;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cadence_serial_setbaudrate(struct console_device *cdev, int baudrate)
|
|
{
|
|
struct cadence_serial_priv *priv = container_of(cdev,
|
|
struct cadence_serial_priv, cdev);
|
|
unsigned int gen, div;
|
|
int calc_rate;
|
|
unsigned long clk;
|
|
int error;
|
|
int val;
|
|
|
|
clk = clk_get_rate(priv->clk);
|
|
priv->baudrate = baudrate;
|
|
|
|
/* disable transmitter and receiver */
|
|
val = readl(priv->regs + CADENCE_UART_CONTROL);
|
|
val &= ~CADENCE_CTRL_TXEN & ~CADENCE_CTRL_RXEN;
|
|
writel(val, priv->regs + CADENCE_UART_CONTROL);
|
|
|
|
/*
|
|
* clk
|
|
* rate = -----------
|
|
* gen*(div+1)
|
|
*/
|
|
|
|
for (div = 4; div < 256; div++) {
|
|
gen = clk / (baudrate * (div + 1));
|
|
|
|
if (gen < 1 || gen > 65535)
|
|
continue;
|
|
|
|
calc_rate = clk / (gen * (div + 1));
|
|
error = baudrate - calc_rate;
|
|
if (error < 0)
|
|
error *= -1;
|
|
if (((error * 100) / baudrate) < 3)
|
|
break;
|
|
}
|
|
|
|
writel(gen, priv->regs + CADENCE_UART_BAUD_GEN);
|
|
writel(div, priv->regs + CADENCE_UART_BAUD_DIV);
|
|
|
|
/* Soft-Reset Tx/Rx paths */
|
|
writel(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES, priv->regs +
|
|
CADENCE_UART_CONTROL);
|
|
|
|
while (readl(priv->regs + CADENCE_UART_CONTROL) &
|
|
(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES))
|
|
;
|
|
|
|
/* Enable UART */
|
|
writel(priv->devtype->ctrl, priv->regs + CADENCE_UART_CONTROL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cadence_serial_init_port(struct console_device *cdev)
|
|
{
|
|
struct cadence_serial_priv *priv = container_of(cdev,
|
|
struct cadence_serial_priv, cdev);
|
|
|
|
cadence_serial_reset(cdev);
|
|
|
|
/* Enable UART */
|
|
writel(priv->devtype->ctrl, priv->regs + CADENCE_UART_CONTROL);
|
|
writel(priv->devtype->mode, priv->regs + CADENCE_UART_MODE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cadence_serial_putc(struct console_device *cdev, char c)
|
|
{
|
|
struct cadence_serial_priv *priv = container_of(cdev,
|
|
struct cadence_serial_priv, cdev);
|
|
|
|
while ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
|
|
CADENCE_STS_TFUL) != 0)
|
|
;
|
|
|
|
writel(c, priv->regs + CADENCE_UART_RXTXFIFO);
|
|
}
|
|
|
|
static int cadence_serial_tstc(struct console_device *cdev)
|
|
{
|
|
struct cadence_serial_priv *priv = container_of(cdev,
|
|
struct cadence_serial_priv, cdev);
|
|
|
|
return ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
|
|
CADENCE_STS_REMPTY) == 0);
|
|
}
|
|
|
|
static int cadence_serial_getc(struct console_device *cdev)
|
|
{
|
|
struct cadence_serial_priv *priv = container_of(cdev,
|
|
struct cadence_serial_priv, cdev);
|
|
|
|
while (!cadence_serial_tstc(cdev))
|
|
;
|
|
|
|
return readl(priv->regs + CADENCE_UART_RXTXFIFO);
|
|
}
|
|
|
|
static void cadence_serial_flush(struct console_device *cdev)
|
|
{
|
|
struct cadence_serial_priv *priv = container_of(cdev,
|
|
struct cadence_serial_priv, cdev);
|
|
|
|
while ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
|
|
CADENCE_STS_TEMPTY) != 0)
|
|
;
|
|
}
|
|
|
|
static int cadence_clocksource_clock_change(struct notifier_block *nb,
|
|
unsigned long event, void *data)
|
|
{
|
|
struct cadence_serial_priv *priv = container_of(nb,
|
|
struct cadence_serial_priv, notify);
|
|
|
|
cadence_serial_setbaudrate(&priv->cdev, priv->baudrate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cadence_serial_probe(struct device_d *dev)
|
|
{
|
|
struct console_device *cdev;
|
|
struct cadence_serial_priv *priv;
|
|
struct cadence_serial_devtype_data *devtype;
|
|
int ret;
|
|
|
|
ret = dev_get_drvdata(dev, (const void **)&devtype);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv = xzalloc(sizeof(*priv));
|
|
priv->devtype = devtype;
|
|
cdev = &priv->cdev;
|
|
dev->priv = priv;
|
|
|
|
priv->clk = clk_get(dev, NULL);
|
|
if (IS_ERR(priv->clk)) {
|
|
ret = -ENODEV;
|
|
goto err_free;
|
|
}
|
|
|
|
if (devtype->mode & CADENCE_MODE_CLK_REF_DIV)
|
|
clk_set_rate(priv->clk, clk_get_rate(priv->clk) / 8);
|
|
|
|
priv->regs = dev_request_mem_region(dev, 0);
|
|
if (IS_ERR(priv->regs)) {
|
|
ret = PTR_ERR(priv->regs);
|
|
goto err_free;
|
|
}
|
|
|
|
cdev->dev = dev;
|
|
cdev->tstc = cadence_serial_tstc;
|
|
cdev->putc = cadence_serial_putc;
|
|
cdev->getc = cadence_serial_getc;
|
|
cdev->flush = cadence_serial_flush;
|
|
cdev->setbrg = cadence_serial_setbaudrate;
|
|
|
|
cadence_serial_init_port(cdev);
|
|
|
|
console_register(cdev);
|
|
priv->notify.notifier_call = cadence_clocksource_clock_change;
|
|
clock_register_client(&priv->notify);
|
|
|
|
return 0;
|
|
|
|
err_free:
|
|
free(priv);
|
|
return ret;
|
|
}
|
|
|
|
static void cadence_serial_remove(struct device_d *dev)
|
|
{
|
|
struct cadence_serial_priv *priv = dev->priv;
|
|
|
|
console_unregister(&priv->cdev);
|
|
free(priv);
|
|
}
|
|
|
|
static __maybe_unused struct of_device_id cadence_serial_dt_ids[] = {
|
|
{
|
|
.compatible = "xlnx,xuartps",
|
|
.data = &cadence_r1p08_data,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
|
|
static struct platform_device_id cadence_serial_ids[] = {
|
|
{
|
|
.name = "cadence-uart",
|
|
.driver_data = (unsigned long)&cadence_r1p08_data,
|
|
}, {
|
|
/* sentinel */
|
|
},
|
|
};
|
|
|
|
static struct driver_d cadence_serial_driver = {
|
|
.name = "cadence_serial",
|
|
.probe = cadence_serial_probe,
|
|
.remove = cadence_serial_remove,
|
|
.of_compatible = DRV_OF_COMPAT(cadence_serial_dt_ids),
|
|
.id_table = cadence_serial_ids,
|
|
};
|
|
|
|
static int cadence_serial_init(void)
|
|
{
|
|
return platform_driver_register(&cadence_serial_driver);
|
|
}
|
|
console_initcall(cadence_serial_init);
|