9
0
Fork 0
barebox/arch/arm/boards/at91sam9x5ek/init.c

164 lines
3.8 KiB
C

/*
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
*/
#include <common.h>
#include <net.h>
#include <init.h>
#include <environment.h>
#include <fec.h>
#include <asm/armlinux.h>
#include <generated/mach-types.h>
#include <partition.h>
#include <fs.h>
#include <fcntl.h>
#include <io.h>
#include <asm/hardware.h>
#include <nand.h>
#include <sizes.h>
#include <linux/mtd/nand.h>
#include <mach/board.h>
#include <mach/at91sam9_smc.h>
#include <mach/sam9_smc.h>
#include <gpio.h>
#include <mach/io.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include <gpio_keys.h>
#include <readkey.h>
static struct atmel_nand_data nand_pdata = {
.ale = 21,
.cle = 22,
.det_pin = 0,
.rdy_pin = AT91_PIN_PD5,
.enable_pin = AT91_PIN_PD4,
#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
.bus_width_16 = 1,
#endif
.on_flash_bbt = 1,
};
static struct sam9_smc_config cm_nand_smc_config = {
.ncs_read_setup = 0,
.nrd_setup = 1,
.ncs_write_setup = 0,
.nwe_setup = 1,
.ncs_read_pulse = 6,
.nrd_pulse = 4,
.ncs_write_pulse = 5,
.nwe_pulse = 3,
.read_cycle = 6,
.write_cycle = 5,
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
.tdf_cycles = 1,
};
static void ek_add_device_nand(void)
{
/* setup bus-width (8 or 16) */
if (nand_pdata.bus_width_16)
cm_nand_smc_config.mode |= AT91_SMC_DBW_16;
else
cm_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &cm_nand_smc_config);
at91_add_device_nand(&nand_pdata);
}
static struct at91_ether_platform_data macb_pdata = {
.flags = AT91SAM_ETHER_RMII,
.phy_addr = 0,
};
/*
* USB Host port
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
.vbus_pin = {AT91_PIN_PD20, AT91_PIN_PD19},
};
struct gpio_led leds[] = {
{
.gpio = AT91_PIN_PB18,
.active_low = 1,
.led = {
.name = "d1",
},
}, {
.gpio = AT91_PIN_PD21,
.led = {
.name = "d2",
},
},
};
static void __init ek_add_led(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(leds); i++) {
at91_set_gpio_output(leds[i].gpio, leds[i].active_low);
led_gpio_register(&leds[i]);
}
led_set_trigger(LED_TRIGGER_HEARTBEAT, &leds[0].led);
}
static int at91sam9x5ek_mem_init(void)
{
at91_add_device_sdram(128 * 1024 * 1024);
return 0;
}
mem_initcall(at91sam9x5ek_mem_init);
static int at91sam9x5ek_devices_init(void)
{
ek_add_device_nand();
at91_add_device_eth(0, &macb_pdata);
at91_add_device_usbh_ohci(&ek_usbh_data);
ek_add_led();
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
armlinux_set_architecture(CONFIG_MACH_AT91SAM9X5EK);
devfs_add_partition("nand0", 0x00000, SZ_256K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_256K, SZ_256K + SZ_128K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_512K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K + SZ_256K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
return 0;
}
device_initcall(at91sam9x5ek_devices_init);
static int at91sam9x5ek_console_init(void)
{
at91_register_uart(0, 0);
at91_register_uart(1, 0);
at91_register_uart(2, 0);
return 0;
}
console_initcall(at91sam9x5ek_console_init);