39 lines
1.0 KiB
Plaintext
39 lines
1.0 KiB
Plaintext
/** @page dlink_dir_320 D-Link DIR-320 wireless router
|
|
|
|
The router has
|
|
@li BCM5354 SoC;
|
|
@li 32 MiB SDRAM;
|
|
@li 4 MiB NOR type Flash Memory;
|
|
@li RS232 serial interface (LV-TTL levels on board!);
|
|
@li 1xUSB interface;
|
|
@li 4 + 1 ethernet interfaces;
|
|
@li 802.11b/g (WiFi) interface;
|
|
@li JTAG interface;
|
|
@li 5 LEDs;
|
|
@li 2 buttons.
|
|
|
|
The router uses CFE as firmware.
|
|
|
|
Barebox can be started from CFE using tftp.
|
|
You must setup tftp-server on host 192.168.0.1.
|
|
Put your barebox.bin to tftp-server directory
|
|
(usual /tftpboot or /srv/tftp).
|
|
Connect your DIR-320 to your tftp-server network via
|
|
one of four <LAN> sockets.
|
|
|
|
Next, setup network on DIR-320 and run barebox.bin, e.g.:
|
|
@verbatim
|
|
CFE> ifconfig eth0 -addr=192.168.0.99
|
|
CFE> boot -tftp -addr=a0800000 -raw 192.168.0.1:barebox.bin
|
|
@endverbatim
|
|
|
|
DIR-320 links:
|
|
@li http://www.dlink.com.au/products/?pid=768
|
|
@li http://wiki.openwrt.org/toh/d-link/dir-320
|
|
|
|
CFE links:
|
|
@li http://www.broadcom.com/support/communications_processors/downloads.php#cfe
|
|
@li http://www.linux-mips.org/wiki/CFE
|
|
|
|
*/
|