sysmo-bts
/
barebox
9
0
Fork 0
Code Releases Activity
barebox/drivers/nand/nand_s3c2410.c

527 lines
13 KiB
C
Raw Blame History

/* linux/drivers/mtd/nand/s3c2410.c
*
* Copyright (C) 2009 Juergen Beisert, Pengutronix
*
* Copyright © 2004-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* Samsung S3C2410 NAND driver
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <driver.h>
#include <malloc.h>
#include <init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <asm/arch/s3c24xx-generic.h>
#include <asm/arch/s3c24x0-iomap.h>
#include <asm/arch/s3c24x0-nand.h>
#include <asm/io.h>
#include <asm-generic/errno.h>
#ifdef CONFIG_S3C24XX_NAND_BOOT
# define __nand_boot_init __bare_init
# ifndef BOARD_DEFAULT_NAND_TIMING
# define BOARD_DEFAULT_NAND_TIMING 0x0737
# endif
#else
# define __nand_boot_init
#endif
/**
* Define this symbol for testing purpose. It will add a command to read an
* image from the NAND like it the boot strap code will do.
*/
#define CONFIG_NAND_S3C24XX_BOOT_DEBUG
/* NAND controller's register */
#define NFCONF 0x00
#ifdef CONFIG_CPU_S3C2410
#define NFCMD 0x04
#define NFADDR 0x08
#define NFDATA 0x0c
#define NFSTAT 0x10
#define NFECC 0x14
/* S3C2410 specific bits */
#define NFSTAT_BUSY (1)
#define NFCONF_nFCE (1 << 11)
#define NFCONF_INITECC (1 << 12)
#define NFCONF_EN (1 << 15)
#endif /* CONFIG_CPU_S3C2410 */
#ifdef CONFIG_CPU_S3C2440
#define NFCONT 0x04
#define NFCMD 0x08
#define NFADDR 0x0C
#define NFDATA 0x10
#define NFECC 0x1C
#define NFSTAT 0x20
/* S3C2440 specific bits */
#define NFSTAT_BUSY (1)
#define NFCONT_nFCE (1 << 1)
#define NFCONF_INITECC (1 << 12)
#define NFCONT_EN (1)
#endif /* CONFIG_CPU_S3C2440 */
struct s3c24x0_nand_host {
struct mtd_info mtd;
struct nand_chip nand;
struct mtd_partition *parts;
struct device_d *dev;
unsigned long base;
};
/**
* oob placement block for use with hardware ecc generation
*/
static struct nand_ecclayout nand_hw_eccoob = {
.eccbytes = 3,
.eccpos = { 0, 1, 2},
.oobfree = {
{
.offset = 8,
.length = 8
}
}
};
/* - Functions shared between the boot strap code and the regular driver - */
/**
* Issue the specified command to the NAND device
* @param[in] host Base address of the NAND controller
* @param[in] cmd Command for NAND flash
*/
static void __nand_boot_init send_cmd(unsigned long host, uint8_t cmd)
{
writeb(cmd, host + NFCMD);
}
/**
* Issue the specified address to the NAND device
* @param[in] host Base address of the NAND controller
* @param[in] addr Address for the NAND flash
*/
static void __nand_boot_init send_addr(unsigned long host, uint8_t addr)
{
writeb(addr, host + NFADDR);
}
/**
* Enable the NAND flash access
* @param[in] host Base address of the NAND controller
*/
static void __nand_boot_init enable_cs(unsigned long host)
{
#ifdef CONFIG_CPU_S3C2410
writew(readw(host + NFCONF) & ~NFCONF_nFCE, host + NFCONF);
#endif
#ifdef CONFIG_CPU_S3C2440
writew(readw(host + NFCONT) & ~NFCONT_nFCE, host + NFCONT);
#endif
}
/**
* Disable the NAND flash access
* @param[in] host Base address of the NAND controller
*/
static void __nand_boot_init disable_cs(unsigned long host)
{
#ifdef CONFIG_CPU_S3C2410
writew(readw(host + NFCONF) | NFCONF_nFCE, host + NFCONF);
#endif
#ifdef CONFIG_CPU_S3C2440
writew(readw(host + NFCONT) | NFCONT_nFCE, host + NFCONT);
#endif
}
/**
* Enable the NAND flash controller
* @param[in] host Base address of the NAND controller
* @param[in] timing Timing to access the NAND memory
*/
static void __nand_boot_init enable_nand_controller(unsigned long host, uint32_t timing)
{
#ifdef CONFIG_CPU_S3C2410
writew(timing + NFCONF_EN + NFCONF_nFCE, host + NFCONF);
#endif
#ifdef CONFIG_CPU_S3C2440
writew(NFCONT_EN + NFCONT_nFCE, host + NFCONT);
writew(timing, host + NFCONF);
#endif
}
/**
* Diable the NAND flash controller
* @param[in] host Base address of the NAND controller
*/
static void __nand_boot_init disable_nand_controller(unsigned long host)
{
#ifdef CONFIG_CPU_S3C2410
writew(NFCONF_nFCE, host + NFCONF);
#endif
#ifdef CONFIG_CPU_S3C2440
writew(NFCONT_nFCE, host + NFCONT);
#endif
}
/* ----------------------------------------------------------------------- */
/**
* Check the ECC and try to repair the data if possible
* @param[in] mtd_info FIXME
* @param[inout] dat Pointer to the data buffer that might contain a bit error
* @param[in] read_ecc ECC data from the OOB space
* @param[in] calc_ecc ECC data calculated from the data
* @return 0 no error, 1 repaired error, -1 no way...
*
* @note: Alsways 512 byte of data
*/
static int s3c2410_nand_correct_data(struct mtd_info *mtd, uint8_t *dat,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
unsigned int diff0, diff1, diff2;
unsigned int bit, byte;
diff0 = read_ecc[0] ^ calc_ecc[0];
diff1 = read_ecc[1] ^ calc_ecc[1];
diff2 = read_ecc[2] ^ calc_ecc[2];
if (diff0 == 0 && diff1 == 0 && diff2 == 0)
return 0; /* ECC is ok */
/* sometimes people do not think about using the ECC, so check
* to see if we have an 0xff,0xff,0xff read ECC and then ignore
* the error, on the assumption that this is an un-eccd page.
*/
if (read_ecc[0] == 0xff && read_ecc[1] == 0xff && read_ecc[2] == 0xff
/* && info->platform->ignore_unset_ecc */)
return 0;
/* Can we correct this ECC (ie, one row and column change).
* Note, this is similar to the 256 error code on smartmedia */
if (((diff0 ^ (diff0 >> 1)) & 0x55) == 0x55 &&
((diff1 ^ (diff1 >> 1)) & 0x55) == 0x55 &&
((diff2 ^ (diff2 >> 1)) & 0x55) == 0x55) {
/* calculate the bit position of the error */
bit = ((diff2 >> 3) & 1) |
((diff2 >> 4) & 2) |
((diff2 >> 5) & 4);
/* calculate the byte position of the error */
byte = ((diff2 << 7) & 0x100) |
((diff1 << 0) & 0x80) |
((diff1 << 1) & 0x40) |
((diff1 << 2) & 0x20) |
((diff1 << 3) & 0x10) |
((diff0 >> 4) & 0x08) |
((diff0 >> 3) & 0x04) |
((diff0 >> 2) & 0x02) |
((diff0 >> 1) & 0x01);
dat[byte] ^= (1 << bit);
return 1;
}
/* if there is only one bit difference in the ECC, then
* one of only a row or column parity has changed, which
* means the error is most probably in the ECC itself */
diff0 |= (diff1 << 8);
diff0 |= (diff2 << 16);
if ((diff0 & ~(1<<fls(diff0))) == 0)
return 1;
return -1;
}
static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
{
struct nand_chip *nand_chip = mtd->priv;
struct s3c24x0_nand_host *host = nand_chip->priv;
writel(readl(host->base + NFCONF) | NFCONF_INITECC , host->base + NFCONF);
}
static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat, uint8_t *ecc_code)
{
struct nand_chip *nand_chip = mtd->priv;
struct s3c24x0_nand_host *host = nand_chip->priv;
ecc_code[0] = readb(host->base + NFECC);
ecc_code[1] = readb(host->base + NFECC + 1);
ecc_code[2] = readb(host->base + NFECC + 2);
return 0;
}
static void s3c24x0_nand_select_chip(struct mtd_info *mtd, int chip)
{
struct nand_chip *nand_chip = mtd->priv;
struct s3c24x0_nand_host *host = nand_chip->priv;
if (chip == -1)
disable_cs(host->base);
else
enable_cs(host->base);
}
static int s3c24x0_nand_devready(struct mtd_info *mtd)
{
struct nand_chip *nand_chip = mtd->priv;
struct s3c24x0_nand_host *host = nand_chip->priv;
return readw(host->base + NFSTAT) & NFSTAT_BUSY;
}
static void s3c24x0_nand_hwcontrol(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
struct nand_chip *nand_chip = mtd->priv;
struct s3c24x0_nand_host *host = nand_chip->priv;
if (cmd == NAND_CMD_NONE)
return;
/*
* If the CLE should be active, this call is a NAND command
*/
if (ctrl & NAND_CLE)
send_cmd(host->base, cmd);
/*
* If the ALE should be active, this call is a NAND address
*/
if (ctrl & NAND_ALE)
send_addr(host->base, cmd);
}
static int s3c24x0_nand_inithw(struct s3c24x0_nand_host *host)
{
struct s3c24x0_nand_platform_data *pdata = host->dev->platform_data;
uint32_t tmp;
/* reset the NAND controller */
disable_nand_controller(host->base);
if (pdata != NULL)
tmp = pdata->nand_timing;
else
/* else slowest possible timing */
tmp = CALC_NFCONF_TIMING(4, 8, 8);
/* reenable the NAND controller */
enable_nand_controller(host->base, tmp);
return 0;
}
static int s3c24x0_nand_probe(struct device_d *dev)
{
struct nand_chip *chip;
struct mtd_info *mtd;
struct s3c24x0_nand_host *host;
int ret;
/* Allocate memory for MTD device structure and private data */
host = kzalloc(sizeof(struct s3c24x0_nand_host), GFP_KERNEL);
if (!host)
return -ENOMEM;
host->dev = dev;
host->base = dev->map_base;
/* structures must be linked */
chip = &host->nand;
mtd = &host->mtd;
mtd->priv = chip;
/* init the default settings */
#if 0
/* TODO: Will follow later */
init_nand_chip_bw8(chip);
#endif
/* 50 us command delay time */
chip->chip_delay = 50;
chip->priv = host;
chip->IO_ADDR_R = chip->IO_ADDR_W = (void*)(dev->map_base + NFDATA);
chip->cmd_ctrl = s3c24x0_nand_hwcontrol;
chip->dev_ready = s3c24x0_nand_devready;
chip->select_chip = s3c24x0_nand_select_chip;
/* we are using the hardware ECC feature of this device */
chip->ecc.calculate = s3c2410_nand_calculate_ecc;
chip->ecc.correct = s3c2410_nand_correct_data;
chip->ecc.hwctl = s3c2410_nand_enable_hwecc;
chip->ecc.calculate = s3c2410_nand_calculate_ecc;
/* our hardware capabilities */
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.size = 512;
chip->ecc.bytes = 3;
chip->ecc.layout = &nand_hw_eccoob;
ret = s3c24x0_nand_inithw(host);
if (ret != 0)
goto on_error;
/* Scan to find existence of the device */
ret = nand_scan(mtd, 1);
if (ret != 0) {
ret = -ENXIO;
goto on_error;
}
return add_mtd_device(mtd);
on_error:
free(host);
return ret;
}
static struct driver_d s3c24x0_nand_driver = {
.name = "s3c24x0_nand",
.probe = s3c24x0_nand_probe,
};
#ifdef CONFIG_S3C24XX_NAND_BOOT
static void __nand_boot_init wait_for_completion(unsigned long host)
{
while (!(readw(host + NFSTAT) & NFSTAT_BUSY))
;
}
static void __nand_boot_init nfc_addr(unsigned long host, uint32_t offs)
{
send_addr(host, offs & 0xff);
send_addr(host, (offs >> 9) & 0xff);
send_addr(host, (offs >> 17) & 0xff);
send_addr(host, (offs >> 25) & 0xff);
}
/**
* Load a sequential count of blocks from the NAND into memory
* @param[out] dest Pointer to target area (in SDRAM)
* @param[in] size Bytes to read from NAND device
* @param[in] page Start page to read from
* @param[in] pagesize Size of each page in the NAND
*
* This function must be located in the first 4kiB of the U-Boot-v2 image
* (guess why). When this routine is running the SDRAM is up and running
* and it runs from the correct address (physical=linked address).
* TODO Could we access the platform data from the boardfile?
* Due to it makes no sense this function does not return in case of failure.
*/
void __nand_boot_init s3c24x0_nand_load_image(void *dest, int size, int page, int pagesize)
{
unsigned long host = S3C24X0_NAND_BASE;
int i;
/*
* Reenable the NFC and use the default (but slow) access
* timing or the board specific setting if provided.
*/
enable_nand_controller(host, BOARD_DEFAULT_NAND_TIMING);
enable_cs(host);
/* Reset the NAND device */
send_cmd(host, NAND_CMD_RESET);
wait_for_completion(host);
disable_cs(host);
do {
enable_cs(host);
send_cmd(host, NAND_CMD_READ0);
nfc_addr(host, page * pagesize);
wait_for_completion(host);
/* copy one page (do *not* use readsb() here!)*/
for (i = 0; i < pagesize; i++)
writeb(readb(host + NFDATA), (unsigned long)(dest + i));
disable_cs(host);
page++;
dest += pagesize;
size -= pagesize;
} while (size >= 0);
/* disable the controller again */
disable_nand_controller(host);
}
#ifdef CONFIG_NAND_S3C24XX_BOOT_DEBUG
#include <command.h>
static int do_nand_boot_test(cmd_tbl_t *cmdtp, int argc, char *argv[])
{
void *dest;
int size, pagesize;
if (argc < 3)
return COMMAND_ERROR_USAGE;
dest = (void *)strtoul_suffix(argv[1], NULL, 0);
size = strtoul_suffix(argv[2], NULL, 0);
pagesize = strtoul_suffix(argv[3], NULL, 0);
s3c24x0_nand_load_image(dest, size, 0, pagesize);
return 0;
}
static const __maybe_unused char cmd_nand_boot_test_help[] =
"Usage: nand_boot_test <dest> <size> <pagesize>\n";
U_BOOT_CMD_START(nand_boot_test)
.maxargs = CONFIG_MAXARGS,
.cmd = do_nand_boot_test,
.usage = "load an image from NAND",
U_BOOT_CMD_HELP(cmd_nand_boot_test_help)
U_BOOT_CMD_END
#endif
#endif /* CONFIG_S3C24XX_NAND_BOOT */
/*
* Main initialization routine
* @return 0 if successful; non-zero otherwise
*/
static int __init s3c24x0_nand_init(void)
{
return register_driver(&s3c24x0_nand_driver);
}
device_initcall(s3c24x0_nand_init);
View Git Blame Copy Permalink