205 lines
5.9 KiB
C
205 lines
5.9 KiB
C
/*
|
|
* (C) Copyright 2012 Fadil Berisha, <fadil.r.berisha@gmail.com>
|
|
* based on falconwing.c & mx23-evk.c
|
|
*
|
|
* (C) Copyright 2010 Juergen Beisert - Pengutronix
|
|
* (C) Copyright 2011 Wolfram Sang - Pengutronix
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <init.h>
|
|
#include <gpio.h>
|
|
#include <environment.h>
|
|
#include <envfs.h>
|
|
#include <errno.h>
|
|
#include <mci.h>
|
|
#include <asm/armlinux.h>
|
|
#include <usb/ehci.h>
|
|
#include <mach/usb.h>
|
|
#include <generated/mach-types.h>
|
|
#include <mach/imx-regs.h>
|
|
#include <mach/clock.h>
|
|
#include <mach/mci.h>
|
|
#include <mach/iomux.h>
|
|
|
|
static struct mxs_mci_platform_data mci_pdata = {
|
|
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED,
|
|
.voltages = MMC_VDD_32_33 | MMC_VDD_33_34, /* fixed to 3.3 V */
|
|
.f_min = 400000,
|
|
};
|
|
|
|
static const uint32_t pad_setup[] = {
|
|
/* debug port */
|
|
PWM1_DUART_TX | STRENGTH(S4MA), /* PWM0/DUART_TXD - U_DEBUG PIN 2 */
|
|
PWM0_DUART_RX | STRENGTH(S4MA), /* PWM0/DUART_RXD - U_DEBUG PIN 1 */
|
|
|
|
/* auart */
|
|
I2C_SDA_AUART1_RX | STRENGTH(S4MA),
|
|
I2C_CLK_AUART1_TX | STRENGTH(S4MA),
|
|
|
|
/* lcd */
|
|
LCD_D17 | STRENGTH(S12MA), /*PIN18/LCD_D17 - GPIO PIN 3 */
|
|
LCD_D16 | STRENGTH(S12MA),
|
|
LCD_D15 | STRENGTH(S12MA),
|
|
LCD_D14 | STRENGTH(S12MA),
|
|
LCD_D13 | STRENGTH(S12MA),
|
|
LCD_D12 | STRENGTH(S12MA),
|
|
LCD_D11 | STRENGTH(S12MA),
|
|
LCD_D10 | STRENGTH(S12MA),
|
|
LCD_D9 | STRENGTH(S12MA),
|
|
LCD_D8 | STRENGTH(S12MA),
|
|
LCD_D7 | STRENGTH(S12MA),
|
|
LCD_D6 | STRENGTH(S12MA),
|
|
LCD_D5 | STRENGTH(S12MA),
|
|
LCD_D4 | STRENGTH(S12MA),
|
|
LCD_D3 | STRENGTH(S12MA),
|
|
LCD_D2 | STRENGTH(S12MA), /* PIN3/LCD_D02 - GPIO PIN 31*/
|
|
LCD_D1 | STRENGTH(S12MA), /* PIN2/LCD_D01 - GPIO PIN 33*/
|
|
LCD_D0 | STRENGTH(S12MA), /* PIN1/LCD_D00 - GPIO PIN 35*/
|
|
LCD_CS, /* PIN26/LCD_CS - GPIO PIN 20*/
|
|
LCD_RS, /* PIN25/LCD_RS - GPIO PIN 18*/
|
|
LCD_WR, /* PIN24/LCD_WR - GPIO PIN 16*/
|
|
LCD_RESET, /* PIN23/LCD_DISP - GPIO PIN 14*/
|
|
LCD_ENABE | STRENGTH(S12MA), /* PIN22/LCD_EN/I2C_SCL - GPIO PIN 12*/
|
|
LCD_VSYNC | STRENGTH(S12MA), /* PIN21/LCD_HSYNC/I2C_SDA- GPIO PIN 10*/
|
|
LCD_HSYNC | STRENGTH(S12MA), /* PIN20/LCD_VSYNC - GPIO PIN 8*/
|
|
LCD_DOTCLOCK | STRENGTH(S12MA), /* PIN19/LCD_DOTCLK - GPIO PIN 6*/
|
|
|
|
|
|
/* SD card interface */
|
|
SSP1_DATA0 | PULLUP(1),
|
|
SSP1_DATA1 | PULLUP(1),
|
|
SSP1_DATA2 | PULLUP(1),
|
|
SSP1_DATA3 | PULLUP(1),
|
|
SSP1_SCK,
|
|
SSP1_CMD | PULLUP(1),
|
|
SSP1_DETECT | PULLUP(1),
|
|
|
|
/* led */
|
|
SSP1_DETECT_GPIO | GPIO_OUT | GPIO_VALUE(1),
|
|
|
|
/* gpio - USB hub LAN9512-JZX*/
|
|
GPMI_ALE_GPIO | GPIO_OUT | GPIO_VALUE(1),
|
|
};
|
|
|
|
static int imx23_olinuxino_mem_init(void)
|
|
{
|
|
arm_add_mem_device("ram0", IMX_MEMORY_BASE, 64 * 1024 * 1024);
|
|
|
|
return 0;
|
|
}
|
|
mem_initcall(imx23_olinuxino_mem_init);
|
|
|
|
static void olinuxino_init_usb(void)
|
|
{
|
|
|
|
imx23_usb_phy_enable();
|
|
|
|
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, IMX_USB_BASE, NULL);
|
|
}
|
|
|
|
static int imx23_olinuxino_devices_init(void)
|
|
{
|
|
int i;
|
|
|
|
/* initizalize gpios */
|
|
for (i = 0; i < ARRAY_SIZE(pad_setup); i++)
|
|
imx_gpio_mode(pad_setup[i]);
|
|
|
|
armlinux_set_architecture(MACH_TYPE_IMX233_OLINUXINO);
|
|
|
|
add_generic_device("mxs_mci", DEVICE_ID_DYNAMIC, NULL, IMX_SSP1_BASE,
|
|
0x8000, IORESOURCE_MEM, &mci_pdata);
|
|
|
|
olinuxino_init_usb();
|
|
|
|
default_environment_path_set("/dev/disk0.1");
|
|
|
|
return 0;
|
|
}
|
|
|
|
device_initcall(imx23_olinuxino_devices_init);
|
|
|
|
static int imx23_olinuxino_console_init(void)
|
|
{
|
|
barebox_set_model("Olimex.ltd imx233-olinuxino");
|
|
barebox_set_hostname("imx233-olinuxino");
|
|
|
|
add_generic_device("stm_serial", 0, NULL, IMX_DBGUART_BASE, 8192,
|
|
IORESOURCE_MEM, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
console_initcall(imx23_olinuxino_console_init);
|
|
|
|
/** @page olinuxino Olimex.ltd's i.MX23 evaluation kit
|
|
|
|
This CPU card is based on an i.MX23 CPU. The card is shipped with:
|
|
|
|
- 64 MiB synchronous dynamic RAM (mobile DDR type)
|
|
|
|
|
|
Memory layout when @b barebox is running:
|
|
|
|
- 0x40000000 start of SDRAM
|
|
- 0x40000100 start of kernel's boot parameters
|
|
- below malloc area: stack area
|
|
- below barebox: malloc area
|
|
- 0x42000000 start of @b barebox
|
|
|
|
@section get_imx23_olinuxino_binary How to get the bootloader binary image:
|
|
|
|
Using the default configuration:
|
|
|
|
@verbatim
|
|
make ARCH=arm imx23_olinuxino_defconfig
|
|
@endverbatim
|
|
|
|
Build the bootloader binary image:
|
|
|
|
@verbatim
|
|
make ARCH=arm CROSS_COMPILE=armv5compiler
|
|
@endverbatim
|
|
|
|
@note replace the armv5compiler with your ARM v5 cross compiler.
|
|
|
|
@section imx233-olinuxino How to prepare an MCI card to boot
|
|
the imx233-olinuxino with barebox
|
|
|
|
- Create four primary partitions on the MCI card
|
|
- the first one for the bootlets (about 256 kiB)
|
|
- the second one for the persistant environment
|
|
(size is up to you, at least 256k)
|
|
- the third one for the kernel (2 MiB ... 4 MiB in size)
|
|
- the 4th one for the root filesystem which can fill the
|
|
rest of the available space
|
|
|
|
- Mark the first partition with the partition ID "53" and copy the bootlets
|
|
into this partition (currently not part of @b barebox!).
|
|
|
|
- @b barebox expect device tree blob file imx23-olinuxino.dtb
|
|
into directory env/oftree. At compile time, copy blob file into directory
|
|
arch/arm/boards/imx233-olinuxino/env/oftree/.
|
|
|
|
- Copy the default @b barebox environment into the second partition
|
|
(no filesystem required).
|
|
|
|
- Copy the kernel into the third partition (no filesystem required).
|
|
|
|
- Create the root filesystem in the 4th partition. You may copy an
|
|
image into this partition or you can do it in the classic way:
|
|
mkfs on it, mount it and copy all required data and programs into it.
|
|
*/
|