Add the MSystem disk-on-chip G3 support, taken from the linux kernel with few amendments to bring it into barebox. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
284 lines
7.5 KiB
C
284 lines
7.5 KiB
C
/*
|
|
* Handles the M-Systems DiskOnChip G3 chip
|
|
*
|
|
* Copyright (C) 2011 Robert Jarzmik
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#ifndef _MTD_DOCG3_H
|
|
#define _MTD_DOCG3_H
|
|
|
|
/*
|
|
* Flash memory areas :
|
|
* - 0x0000 .. 0x07ff : IPL
|
|
* - 0x0800 .. 0x0fff : Data area
|
|
* - 0x1000 .. 0x17ff : Registers
|
|
* - 0x1800 .. 0x1fff : Unknown
|
|
*/
|
|
#define DOC_IOSPACE_IPL 0x0000
|
|
#define DOC_IOSPACE_DATA 0x0800
|
|
#define DOC_IOSPACE_SIZE 0x2000
|
|
|
|
/*
|
|
* DOC G3 layout and adressing scheme
|
|
* A page address for the block "b", plane "P" and page "p":
|
|
* address = [bbbb bPpp pppp]
|
|
*/
|
|
|
|
#define DOC_ADDR_PAGE_MASK 0x3f
|
|
#define DOC_ADDR_BLOCK_SHIFT 6
|
|
#define DOC_LAYOUT_NBPLANES 2
|
|
#define DOC_LAYOUT_PAGES_PER_BLOCK 64
|
|
#define DOC_LAYOUT_PAGE_SIZE 512
|
|
#define DOC_LAYOUT_OOB_SIZE 16
|
|
#define DOC_LAYOUT_WEAR_SIZE 8
|
|
#define DOC_LAYOUT_PAGE_OOB_SIZE \
|
|
(DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE)
|
|
#define DOC_LAYOUT_WEAR_OFFSET (DOC_LAYOUT_PAGE_OOB_SIZE * 2)
|
|
#define DOC_LAYOUT_BLOCK_SIZE \
|
|
(DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE)
|
|
|
|
/*
|
|
* ECC related constants
|
|
*/
|
|
#define DOC_ECC_BCH_M 14
|
|
#define DOC_ECC_BCH_T 4
|
|
#define DOC_ECC_BCH_PRIMPOLY 0x4443
|
|
#define DOC_ECC_BCH_SIZE 7
|
|
#define DOC_ECC_BCH_COVERED_BYTES \
|
|
(DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ + \
|
|
DOC_LAYOUT_OOB_HAMMING_SZ)
|
|
#define DOC_ECC_BCH_TOTAL_BYTES \
|
|
(DOC_ECC_BCH_COVERED_BYTES + DOC_LAYOUT_OOB_BCH_SZ)
|
|
|
|
/*
|
|
* Blocks distribution
|
|
*/
|
|
#define DOC_LAYOUT_BLOCK_BBT 0
|
|
#define DOC_LAYOUT_BLOCK_OTP 0
|
|
#define DOC_LAYOUT_BLOCK_FIRST_DATA 6
|
|
|
|
#define DOC_LAYOUT_PAGE_BBT 4
|
|
|
|
/*
|
|
* Extra page OOB (16 bytes wide) layout
|
|
*/
|
|
#define DOC_LAYOUT_OOB_PAGEINFO_OFS 0
|
|
#define DOC_LAYOUT_OOB_HAMMING_OFS 7
|
|
#define DOC_LAYOUT_OOB_BCH_OFS 8
|
|
#define DOC_LAYOUT_OOB_UNUSED_OFS 15
|
|
#define DOC_LAYOUT_OOB_PAGEINFO_SZ 7
|
|
#define DOC_LAYOUT_OOB_HAMMING_SZ 1
|
|
#define DOC_LAYOUT_OOB_BCH_SZ 7
|
|
#define DOC_LAYOUT_OOB_UNUSED_SZ 1
|
|
|
|
|
|
#define DOC_CHIPID_G3 0x200
|
|
#define DOC_ERASE_MARK 0xaa
|
|
#define DOC_MAX_NBFLOORS 4
|
|
/*
|
|
* Flash registers
|
|
*/
|
|
#define DOC_CHIPID 0x1000
|
|
#define DOC_TEST 0x1004
|
|
#define DOC_BUSLOCK 0x1006
|
|
#define DOC_ENDIANCONTROL 0x1008
|
|
#define DOC_DEVICESELECT 0x100a
|
|
#define DOC_ASICMODE 0x100c
|
|
#define DOC_CONFIGURATION 0x100e
|
|
#define DOC_INTERRUPTCONTROL 0x1010
|
|
#define DOC_READADDRESS 0x101a
|
|
#define DOC_DATAEND 0x101e
|
|
#define DOC_INTERRUPTSTATUS 0x1020
|
|
|
|
#define DOC_FLASHSEQUENCE 0x1032
|
|
#define DOC_FLASHCOMMAND 0x1034
|
|
#define DOC_FLASHADDRESS 0x1036
|
|
#define DOC_FLASHCONTROL 0x1038
|
|
#define DOC_NOP 0x103e
|
|
|
|
#define DOC_ECCCONF0 0x1040
|
|
#define DOC_ECCCONF1 0x1042
|
|
#define DOC_ECCPRESET 0x1044
|
|
#define DOC_HAMMINGPARITY 0x1046
|
|
#define DOC_BCH_HW_ECC(idx) (0x1048 + idx)
|
|
|
|
#define DOC_PROTECTION 0x1056
|
|
#define DOC_DPS0_KEY 0x105c
|
|
#define DOC_DPS1_KEY 0x105e
|
|
#define DOC_DPS0_ADDRLOW 0x1060
|
|
#define DOC_DPS0_ADDRHIGH 0x1062
|
|
#define DOC_DPS1_ADDRLOW 0x1064
|
|
#define DOC_DPS1_ADDRHIGH 0x1066
|
|
#define DOC_DPS0_STATUS 0x106c
|
|
#define DOC_DPS1_STATUS 0x106e
|
|
|
|
#define DOC_ASICMODECONFIRM 0x1072
|
|
#define DOC_CHIPID_INV 0x1074
|
|
#define DOC_POWERMODE 0x107c
|
|
|
|
/*
|
|
* Flash sequences
|
|
* A sequence is preset before one or more commands are input to the chip.
|
|
*/
|
|
#define DOC_SEQ_RESET 0x00
|
|
#define DOC_SEQ_PAGE_SIZE_532 0x03
|
|
#define DOC_SEQ_SET_FASTMODE 0x05
|
|
#define DOC_SEQ_SET_RELIABLEMODE 0x09
|
|
#define DOC_SEQ_READ 0x12
|
|
#define DOC_SEQ_SET_PLANE1 0x0e
|
|
#define DOC_SEQ_SET_PLANE2 0x10
|
|
#define DOC_SEQ_PAGE_SETUP 0x1d
|
|
#define DOC_SEQ_ERASE 0x27
|
|
#define DOC_SEQ_PLANES_STATUS 0x31
|
|
|
|
/*
|
|
* Flash commands
|
|
*/
|
|
#define DOC_CMD_READ_PLANE1 0x00
|
|
#define DOC_CMD_SET_ADDR_READ 0x05
|
|
#define DOC_CMD_READ_ALL_PLANES 0x30
|
|
#define DOC_CMD_READ_PLANE2 0x50
|
|
#define DOC_CMD_READ_FLASH 0xe0
|
|
#define DOC_CMD_PAGE_SIZE_532 0x3c
|
|
|
|
#define DOC_CMD_PROG_BLOCK_ADDR 0x60
|
|
#define DOC_CMD_PROG_CYCLE1 0x80
|
|
#define DOC_CMD_PROG_CYCLE2 0x10
|
|
#define DOC_CMD_PROG_CYCLE3 0x11
|
|
#define DOC_CMD_ERASECYCLE2 0xd0
|
|
#define DOC_CMD_READ_STATUS 0x70
|
|
#define DOC_CMD_PLANES_STATUS 0x71
|
|
|
|
#define DOC_CMD_RELIABLE_MODE 0x22
|
|
#define DOC_CMD_FAST_MODE 0xa2
|
|
|
|
#define DOC_CMD_RESET 0xff
|
|
|
|
/*
|
|
* Flash register : DOC_FLASHCONTROL
|
|
*/
|
|
#define DOC_CTRL_VIOLATION 0x20
|
|
#define DOC_CTRL_CE 0x10
|
|
#define DOC_CTRL_UNKNOWN_BITS 0x08
|
|
#define DOC_CTRL_PROTECTION_ERROR 0x04
|
|
#define DOC_CTRL_SEQUENCE_ERROR 0x02
|
|
#define DOC_CTRL_FLASHREADY 0x01
|
|
|
|
/*
|
|
* Flash register : DOC_ASICMODE
|
|
*/
|
|
#define DOC_ASICMODE_RESET 0x00
|
|
#define DOC_ASICMODE_NORMAL 0x01
|
|
#define DOC_ASICMODE_POWERDOWN 0x02
|
|
#define DOC_ASICMODE_MDWREN 0x04
|
|
#define DOC_ASICMODE_BDETCT_RESET 0x08
|
|
#define DOC_ASICMODE_RSTIN_RESET 0x10
|
|
#define DOC_ASICMODE_RAM_WE 0x20
|
|
|
|
/*
|
|
* Flash register : DOC_ECCCONF0
|
|
*/
|
|
#define DOC_ECCCONF0_WRITE_MODE 0x0000
|
|
#define DOC_ECCCONF0_READ_MODE 0x8000
|
|
#define DOC_ECCCONF0_AUTO_ECC_ENABLE 0x4000
|
|
#define DOC_ECCCONF0_HAMMING_ENABLE 0x1000
|
|
#define DOC_ECCCONF0_BCH_ENABLE 0x0800
|
|
#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff
|
|
|
|
/*
|
|
* Flash register : DOC_ECCCONF1
|
|
*/
|
|
#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80
|
|
#define DOC_ECCCONF1_UNKOWN1 0x40
|
|
#define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20
|
|
#define DOC_ECCCONF1_UNKOWN3 0x10
|
|
#define DOC_ECCCONF1_HAMMING_BITS_MASK 0x0f
|
|
|
|
/*
|
|
* Flash register : DOC_PROTECTION
|
|
*/
|
|
#define DOC_PROTECT_FOUNDRY_OTP_LOCK 0x01
|
|
#define DOC_PROTECT_CUSTOMER_OTP_LOCK 0x02
|
|
#define DOC_PROTECT_LOCK_INPUT 0x04
|
|
#define DOC_PROTECT_STICKY_LOCK 0x08
|
|
#define DOC_PROTECT_PROTECTION_ENABLED 0x10
|
|
#define DOC_PROTECT_IPL_DOWNLOAD_LOCK 0x20
|
|
#define DOC_PROTECT_PROTECTION_ERROR 0x80
|
|
|
|
/*
|
|
* Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS
|
|
*/
|
|
#define DOC_DPS_OTP_PROTECTED 0x01
|
|
#define DOC_DPS_READ_PROTECTED 0x02
|
|
#define DOC_DPS_WRITE_PROTECTED 0x04
|
|
#define DOC_DPS_HW_LOCK_ENABLED 0x08
|
|
#define DOC_DPS_KEY_OK 0x80
|
|
|
|
/*
|
|
* Flash register : DOC_CONFIGURATION
|
|
*/
|
|
#define DOC_CONF_IF_CFG 0x80
|
|
#define DOC_CONF_MAX_ID_MASK 0x30
|
|
#define DOC_CONF_VCCQ_3V 0x01
|
|
|
|
/*
|
|
* Flash register : DOC_READADDRESS
|
|
*/
|
|
#define DOC_READADDR_INC 0x8000
|
|
#define DOC_READADDR_ONE_BYTE 0x4000
|
|
#define DOC_READADDR_ADDR_MASK 0x1fff
|
|
|
|
/*
|
|
* Flash register : DOC_POWERMODE
|
|
*/
|
|
#define DOC_POWERDOWN_READY 0x80
|
|
|
|
/*
|
|
* Status of erase and write operation
|
|
*/
|
|
#define DOC_PLANES_STATUS_FAIL 0x01
|
|
#define DOC_PLANES_STATUS_PLANE0_KO 0x02
|
|
#define DOC_PLANES_STATUS_PLANE1_KO 0x04
|
|
|
|
/*
|
|
* DPS key management
|
|
*
|
|
* Each floor of docg3 has 2 protection areas: DPS0 and DPS1. These areas span
|
|
* across block boundaries, and define whether these blocks can be read or
|
|
* written.
|
|
* The definition is dynamically stored in page 0 of blocks (2,3) for DPS0, and
|
|
* page 0 of blocks (4,5) for DPS1.
|
|
*/
|
|
#define DOC_LAYOUT_DPS_KEY_LENGTH 8
|
|
|
|
struct docg3 {
|
|
struct device_d *dev;
|
|
void __iomem *base;
|
|
unsigned int device_id:4;
|
|
unsigned int if_cfg:1;
|
|
unsigned int reliable:2;
|
|
int max_block;
|
|
u8 *bbt;
|
|
loff_t oob_write_ofs;
|
|
int oob_autoecc;
|
|
u8 oob_write_buf[DOC_LAYOUT_OOB_SIZE];
|
|
};
|
|
|
|
#define doc_err(fmt, arg...) dev_err(docg3->dev, fmt, ## arg)
|
|
#define doc_info(fmt, arg...) dev_info(docg3->dev, fmt, ## arg)
|
|
#define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, fmt, ## arg)
|
|
#define doc_vdbg(fmt, arg...) dev_dbg(docg3->dev, fmt, ## arg)
|
|
|
|
#endif
|