151 lines
4.0 KiB
C
151 lines
4.0 KiB
C
/*
|
|
* Copyright (C) 2009 Juergen Beisert, Pengutronix
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <driver.h>
|
|
#include <init.h>
|
|
#include <asm/armlinux.h>
|
|
#include <generated/mach-types.h>
|
|
#include <asm/sections.h>
|
|
#include <partition.h>
|
|
#include <nand.h>
|
|
#include <io.h>
|
|
#include <mach/devices-s3c24xx.h>
|
|
#include <mach/s3c-iomap.h>
|
|
#include <mach/s3c24xx-nand.h>
|
|
#include <mach/s3c-generic.h>
|
|
#include <mach/s3c-busctl.h>
|
|
#include <mach/s3c24xx-gpio.h>
|
|
|
|
// {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
|
|
static struct s3c24x0_nand_platform_data nand_info = {
|
|
.nand_timing = CALC_NFCONF_TIMING(A9M2410_TACLS, A9M2410_TWRPH0, A9M2410_TWRPH1)
|
|
};
|
|
|
|
static int a9m2410_mem_init(void)
|
|
{
|
|
resource_size_t size;
|
|
|
|
/*
|
|
* Note: On this card the second SDRAM page is not used
|
|
*/
|
|
s3c24xx_disable_second_sdram_bank();
|
|
size = s3c24xx_get_memory_size();
|
|
|
|
/* ---------- configure the GPIOs ------------- */
|
|
writel(0x007FFFFF, S3C_GPACON);
|
|
writel(0x00000000, S3C_GPCCON);
|
|
writel(0x00000000, S3C_GPCUP);
|
|
writel(0x00000000, S3C_GPDCON);
|
|
writel(0x00000000, S3C_GPDUP);
|
|
writel(0xAAAAAAAA, S3C_GPECON);
|
|
writel(0x0000E03F, S3C_GPEUP);
|
|
writel(0x00000000, S3C_GPBCON); /* all inputs */
|
|
writel(0x00000007, S3C_GPBUP); /* pullup disabled for GPB0..3 */
|
|
writel(0x00009000, S3C_GPFCON); /* GPF7 CLK_INT#, GPF6 Debug-LED */
|
|
writel(0x000000FF, S3C_GPFUP);
|
|
writel(readl(S3C_GPGDAT) | 0x0010, S3C_GPGDAT); /* switch off LCD backlight */
|
|
writel(0xFF00A938, S3C_GPGCON); /* switch off USB device */
|
|
writel(0x0000F000, S3C_GPGUP);
|
|
writel(readl(S3C_GPHDAT) | 0x100, S3C_GPHDAT); /* switch BOOTINT/GPIO_ON# to high */
|
|
writel(0x000007FF, S3C_GPHUP);
|
|
writel(0x0029FAAA, S3C_GPHCON);
|
|
/*
|
|
* USB port1 normal, USB port0 normal, USB1 pads for device
|
|
* PCLK output on CLKOUT0, UPLL CLK output on CLKOUT1,
|
|
* 2nd SDRAM bank off (only bank 1 is used)
|
|
*/
|
|
writel(0x40140, S3C_MISCCR);
|
|
|
|
arm_add_mem_device("ram0", S3C_SDRAM_BASE, size);
|
|
|
|
return 0;
|
|
}
|
|
mem_initcall(a9m2410_mem_init);
|
|
|
|
static const struct devfs_partition a9m2410_nand0_partitions[] = {
|
|
{
|
|
.offset = 0,
|
|
.size = 0x40000,
|
|
.flags = DEVFS_PARTITION_FIXED,
|
|
.name = "self_raw",
|
|
.bbname = "self0",
|
|
}, {
|
|
.offset = DEVFS_PARTITION_APPEND,
|
|
.size = 0x20000,
|
|
.flags = DEVFS_PARTITION_FIXED,
|
|
.name = "env_raw",
|
|
.bbname = "env0",
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
|
|
static int a9m2410_devices_init(void)
|
|
{
|
|
uint32_t reg;
|
|
|
|
/* ----------- configure the access to the outer space ---------- */
|
|
reg = readl(S3C_BWSCON);
|
|
|
|
/* CS#1 to access the network controller */
|
|
reg &= ~0xf0;
|
|
reg |= 0xe0;
|
|
writel(0x1350, S3C_BANKCON1);
|
|
|
|
/* CS#2 to the dual 16550 UART */
|
|
reg &= ~0xf00;
|
|
reg |= 0x400;
|
|
writel(0x0d50, S3C_BANKCON2);
|
|
|
|
writel(reg, S3C_BWSCON);
|
|
|
|
/* release the reset signal to the network and UART device */
|
|
reg = readl(S3C_MISCCR);
|
|
reg |= 0x10000;
|
|
writel(reg, S3C_MISCCR);
|
|
|
|
/* ----------- the devices the boot loader should work with -------- */
|
|
s3c24xx_add_nand(&nand_info);
|
|
/*
|
|
* SMSC 91C111 network controller on the baseboard
|
|
* connected to CS line 1 and interrupt line
|
|
* GPIO3, data width is 32 bit
|
|
*/
|
|
add_generic_device("smc91c111", DEVICE_ID_DYNAMIC, NULL, S3C_CS1_BASE + 0x300,
|
|
16, IORESOURCE_MEM, NULL);
|
|
|
|
if (IS_ENABLED(CONFIG_NAND))
|
|
devfs_create_partitions("nand0", a9m2410_nand0_partitions);
|
|
|
|
armlinux_set_architecture(MACH_TYPE_A9M2410);
|
|
|
|
return 0;
|
|
}
|
|
|
|
device_initcall(a9m2410_devices_init);
|
|
|
|
static int a9m2410_console_init(void)
|
|
{
|
|
barebox_set_model("Digi A9M2410");
|
|
barebox_set_hostname("a9m2410");
|
|
|
|
s3c24xx_add_uart1();
|
|
return 0;
|
|
}
|
|
|
|
console_initcall(a9m2410_console_init);
|