274 lines
6.8 KiB
C
274 lines
6.8 KiB
C
/*
|
|
* Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <net.h>
|
|
#include <init.h>
|
|
#include <environment.h>
|
|
#include <asm/armlinux.h>
|
|
#include <generated/mach-types.h>
|
|
#include <partition.h>
|
|
#include <fs.h>
|
|
#include <fcntl.h>
|
|
#include <io.h>
|
|
#include <mach/hardware.h>
|
|
#include <nand.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/clk.h>
|
|
#include <mach/board.h>
|
|
#include <mach/at91sam9_smc.h>
|
|
#include <mach/at91sam9_sdramc.h>
|
|
#include <gpio.h>
|
|
#include <mach/io.h>
|
|
#include <mach/iomux.h>
|
|
#include <mach/at91_pmc.h>
|
|
#include <mach/at91_rstc.h>
|
|
#include <spi/eeprom.h>
|
|
|
|
static void tny_a9260_set_board_type(void)
|
|
{
|
|
if (machine_is_tny_a9g20())
|
|
armlinux_set_architecture(MACH_TYPE_TNY_A9G20);
|
|
else if (machine_is_tny_a9263())
|
|
armlinux_set_architecture(MACH_TYPE_TNY_A9263);
|
|
else
|
|
armlinux_set_architecture(MACH_TYPE_TNY_A9260);
|
|
}
|
|
|
|
static struct atmel_nand_data nand_pdata = {
|
|
.ale = 21,
|
|
.cle = 22,
|
|
.det_pin = -EINVAL,
|
|
.rdy_pin = AT91_PIN_PC13,
|
|
.enable_pin = AT91_PIN_PC14,
|
|
.ecc_mode = NAND_ECC_SOFT,
|
|
.on_flash_bbt = 1,
|
|
};
|
|
|
|
static struct sam9_smc_config tny_a9260_nand_smc_config = {
|
|
.ncs_read_setup = 0,
|
|
.nrd_setup = 1,
|
|
.ncs_write_setup = 0,
|
|
.nwe_setup = 1,
|
|
|
|
.ncs_read_pulse = 3,
|
|
.nrd_pulse = 3,
|
|
.ncs_write_pulse = 3,
|
|
.nwe_pulse = 3,
|
|
|
|
.read_cycle = 5,
|
|
.write_cycle = 5,
|
|
|
|
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \
|
|
AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
|
|
.tdf_cycles = 2,
|
|
};
|
|
|
|
static struct sam9_smc_config tny_a9g20_nand_smc_config = {
|
|
.ncs_read_setup = 0,
|
|
.nrd_setup = 2,
|
|
.ncs_write_setup = 0,
|
|
.nwe_setup = 2,
|
|
|
|
.ncs_read_pulse = 4,
|
|
.nrd_pulse = 4,
|
|
.ncs_write_pulse = 4,
|
|
.nwe_pulse = 4,
|
|
|
|
.read_cycle = 7,
|
|
.write_cycle = 7,
|
|
|
|
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \
|
|
AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
|
|
.tdf_cycles = 3,
|
|
};
|
|
|
|
static void tny_a9260_add_device_nand(void)
|
|
{
|
|
/* configure chip-select 3 (NAND) */
|
|
if (machine_is_tny_a9g20())
|
|
sam9_smc_configure(0, 3, &tny_a9g20_nand_smc_config);
|
|
else
|
|
sam9_smc_configure(0, 3, &tny_a9260_nand_smc_config);
|
|
|
|
if (machine_is_tny_a9263()) {
|
|
nand_pdata.rdy_pin = AT91_PIN_PA22;
|
|
nand_pdata.enable_pin = AT91_PIN_PD15;
|
|
}
|
|
|
|
at91_add_device_nand(&nand_pdata);
|
|
}
|
|
|
|
#ifdef CONFIG_DRIVER_NET_MACB
|
|
static struct macb_platform_data macb_pdata = {
|
|
.phy_interface = PHY_INTERFACE_MODE_RMII,
|
|
.phy_addr = -1,
|
|
};
|
|
|
|
static void __init ek_add_device_macb(void)
|
|
{
|
|
if (IS_ENABLED(CONFIG_CALAO_MOB_TNY_MD2))
|
|
at91_add_device_eth(0, &macb_pdata);
|
|
}
|
|
#else
|
|
static void __init ek_add_device_macb(void) {}
|
|
#endif
|
|
|
|
/*
|
|
* USB Device port
|
|
*/
|
|
static struct at91_udc_data __initdata ek_udc_data = {
|
|
.vbus_pin = AT91_PIN_PB30,
|
|
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
|
|
};
|
|
|
|
static struct spi_eeprom eeprom = {
|
|
.name = "at250x0",
|
|
.size = 8192,
|
|
.page_size = 32,
|
|
.flags = EE_ADDR2, /* 16 bits address */
|
|
};
|
|
|
|
static struct spi_board_info tny_a9g20_spi_devices[] = {
|
|
{
|
|
.name = "at25x",
|
|
.max_speed_hz = 1 * 1000 * 1000, /* max spi clock (SCK) speed in HZ */
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
.platform_data = &eeprom,
|
|
},
|
|
};
|
|
|
|
static struct spi_board_info tny_a9g20_lpw_spi_devices[] = {
|
|
{
|
|
.name = "spi_mci",
|
|
.max_speed_hz = 25 * 1000 * 1000,
|
|
.bus_num = 1,
|
|
.chip_select = 0,
|
|
},
|
|
};
|
|
|
|
static struct spi_board_info tny_a9263_spi_devices[] = {
|
|
{
|
|
.name = "mtd_dataflash",
|
|
.max_speed_hz = 15 * 1000 * 1000,
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
},
|
|
};
|
|
|
|
static int tny_a9263_spi0_standard_cs[] = { AT91_PIN_PA5 };
|
|
struct at91_spi_platform_data tny_a9263_spi0_pdata = {
|
|
.chipselect = tny_a9263_spi0_standard_cs,
|
|
.num_chipselect = ARRAY_SIZE(tny_a9263_spi0_standard_cs),
|
|
};
|
|
|
|
static int tny_a9g20_spi0_standard_cs[] = { AT91_PIN_PC11 };
|
|
struct at91_spi_platform_data tny_a9g20_spi0_pdata = {
|
|
.chipselect = tny_a9g20_spi0_standard_cs,
|
|
.num_chipselect = ARRAY_SIZE(tny_a9g20_spi0_standard_cs),
|
|
};
|
|
|
|
static int tny_a9g20_spi1_standard_cs[] = { AT91_PIN_PC3 };
|
|
struct at91_spi_platform_data tny_a9g20_spi1_pdata = {
|
|
.chipselect = tny_a9g20_spi1_standard_cs,
|
|
.num_chipselect = ARRAY_SIZE(tny_a9g20_spi1_standard_cs),
|
|
};
|
|
|
|
static void __init ek_add_device_udc(void)
|
|
{
|
|
if (machine_is_tny_a9260() || machine_is_tny_a9g20())
|
|
ek_udc_data.vbus_pin = AT91_PIN_PC5;
|
|
|
|
at91_add_device_udc(&ek_udc_data);
|
|
}
|
|
|
|
static void __init ek_add_device_spi(void)
|
|
{
|
|
if (machine_is_tny_a9263()) {
|
|
spi_register_board_info(tny_a9263_spi_devices,
|
|
ARRAY_SIZE(tny_a9263_spi_devices));
|
|
at91_add_device_spi(0, &tny_a9263_spi0_pdata);
|
|
|
|
} else if (machine_is_tny_a9g20() && at91sam9260_is_low_power_sdram()) {
|
|
spi_register_board_info(tny_a9g20_lpw_spi_devices,
|
|
ARRAY_SIZE(tny_a9g20_lpw_spi_devices));
|
|
at91_add_device_spi(1, &tny_a9g20_spi1_pdata);
|
|
} else {
|
|
spi_register_board_info(tny_a9g20_spi_devices,
|
|
ARRAY_SIZE(tny_a9g20_spi_devices));
|
|
at91_add_device_spi(0, &tny_a9g20_spi0_pdata);
|
|
}
|
|
}
|
|
|
|
static int tny_a9260_mem_init(void)
|
|
{
|
|
at91_add_device_sdram(0);
|
|
|
|
return 0;
|
|
}
|
|
mem_initcall(tny_a9260_mem_init);
|
|
|
|
static int tny_a9260_devices_init(void)
|
|
{
|
|
tny_a9260_add_device_nand();
|
|
ek_add_device_macb();
|
|
ek_add_device_udc();
|
|
ek_add_device_spi();
|
|
|
|
tny_a9260_set_board_type();
|
|
|
|
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
|
|
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
|
|
devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
|
|
dev_add_bb_dev("self_raw", "self0");
|
|
devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
|
|
dev_add_bb_dev("env_raw", "env0");
|
|
devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
|
|
dev_add_bb_dev("env_raw1", "env1");
|
|
|
|
return 0;
|
|
}
|
|
device_initcall(tny_a9260_devices_init);
|
|
|
|
static int tny_a9260_console_init(void)
|
|
{
|
|
if (machine_is_tny_a9g20()) {
|
|
barebox_set_model("Calao TNY-A9G20");
|
|
barebox_set_hostname("tny-a9g20");
|
|
} else if (machine_is_tny_a9263()) {
|
|
barebox_set_model("Calao TNY-A9263");
|
|
barebox_set_hostname("tny-a9263");
|
|
} else {
|
|
barebox_set_model("Calao TNY-A9260");
|
|
barebox_set_hostname("tny-a9260");
|
|
}
|
|
|
|
at91_register_uart(0, 0);
|
|
if (IS_ENABLED(CONFIG_CALAO_MOB_TNY_MD2))
|
|
at91_register_uart(2, ATMEL_UART_CTS | ATMEL_UART_RTS);
|
|
return 0;
|
|
}
|
|
console_initcall(tny_a9260_console_init);
|
|
|
|
static int tny_a9260_main_clock(void)
|
|
{
|
|
at91_set_main_clock(12000000);
|
|
return 0;
|
|
}
|
|
pure_initcall(tny_a9260_main_clock);
|