558 lines
15 KiB
C
558 lines
15 KiB
C
/*
|
|
* Synopsys Designware PCIe host controller driver
|
|
*
|
|
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* Author: Jingoo Han <jg1.han@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
|
|
#include <common.h>
|
|
#include <clock.h>
|
|
#include <malloc.h>
|
|
#include <io.h>
|
|
#include <init.h>
|
|
#include <asm/mmu.h>
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/kernel.h>
|
|
#include <of_address.h>
|
|
#include <of_pci.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/sizes.h>
|
|
|
|
#include "pcie-designware.h"
|
|
|
|
/* Synopsis specific PCIE configuration registers */
|
|
#define PCIE_PORT_LINK_CONTROL 0x710
|
|
#define PORT_LINK_MODE_MASK (0x3f << 16)
|
|
#define PORT_LINK_MODE_1_LANES (0x1 << 16)
|
|
#define PORT_LINK_MODE_2_LANES (0x3 << 16)
|
|
#define PORT_LINK_MODE_4_LANES (0x7 << 16)
|
|
|
|
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
|
|
#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17)
|
|
#define PORT_LOGIC_LINK_WIDTH_MASK (0x1ff << 8)
|
|
#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8)
|
|
#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8)
|
|
#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8)
|
|
|
|
#define PCIE_MSI_ADDR_LO 0x820
|
|
#define PCIE_MSI_ADDR_HI 0x824
|
|
#define PCIE_MSI_INTR0_ENABLE 0x828
|
|
#define PCIE_MSI_INTR0_MASK 0x82C
|
|
#define PCIE_MSI_INTR0_STATUS 0x830
|
|
|
|
#define PCIE_ATU_VIEWPORT 0x900
|
|
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
|
|
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
|
|
#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
|
|
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
|
|
#define PCIE_ATU_CR1 0x904
|
|
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
|
|
#define PCIE_ATU_TYPE_IO (0x2 << 0)
|
|
#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
|
|
#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
|
|
#define PCIE_ATU_CR2 0x908
|
|
#define PCIE_ATU_ENABLE (0x1 << 31)
|
|
#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
|
|
#define PCIE_ATU_LOWER_BASE 0x90C
|
|
#define PCIE_ATU_UPPER_BASE 0x910
|
|
#define PCIE_ATU_LIMIT 0x914
|
|
#define PCIE_ATU_LOWER_TARGET 0x918
|
|
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
|
|
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
|
|
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
|
|
#define PCIE_ATU_UPPER_TARGET 0x91C
|
|
|
|
static unsigned long global_io_offset;
|
|
|
|
int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val)
|
|
{
|
|
*val = readl(addr);
|
|
|
|
if (size == 1)
|
|
*val = (*val >> (8 * (where & 3))) & 0xff;
|
|
else if (size == 2)
|
|
*val = (*val >> (8 * (where & 3))) & 0xffff;
|
|
else if (size != 4)
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
int dw_pcie_cfg_write(void __iomem *addr, int where, int size, u32 val)
|
|
{
|
|
if (size == 4)
|
|
writel(val, addr);
|
|
else if (size == 2)
|
|
writew(val, addr + (where & 2));
|
|
else if (size == 1)
|
|
writeb(val, addr + (where & 3));
|
|
else
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static inline void dw_pcie_readl_rc(struct pcie_port *pp, u32 reg, u32 *val)
|
|
{
|
|
if (pp->ops->readl_rc)
|
|
pp->ops->readl_rc(pp, pp->dbi_base + reg, val);
|
|
else
|
|
*val = readl(pp->dbi_base + reg);
|
|
}
|
|
|
|
static inline void dw_pcie_writel_rc(struct pcie_port *pp, u32 val, u32 reg)
|
|
{
|
|
if (pp->ops->writel_rc)
|
|
pp->ops->writel_rc(pp, val, pp->dbi_base + reg);
|
|
else
|
|
writel(val, pp->dbi_base + reg);
|
|
}
|
|
|
|
#include <abort.h>
|
|
|
|
static int dw_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
|
|
u32 *val)
|
|
{
|
|
int ret;
|
|
|
|
if (pp->ops->rd_own_conf)
|
|
ret = pp->ops->rd_own_conf(pp, where, size, val);
|
|
else
|
|
ret = dw_pcie_cfg_read(pp->dbi_base + (where & ~0x3), where,
|
|
size, val);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size,
|
|
u32 val)
|
|
{
|
|
int ret;
|
|
|
|
if (pp->ops->wr_own_conf)
|
|
ret = pp->ops->wr_own_conf(pp, where, size, val);
|
|
else
|
|
ret = dw_pcie_cfg_write(pp->dbi_base + (where & ~0x3), where,
|
|
size, val);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int dw_pcie_link_up(struct pcie_port *pp)
|
|
{
|
|
if (pp->ops->link_up)
|
|
return pp->ops->link_up(pp);
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static inline struct pcie_port *host_to_pcie(struct pci_controller *host)
|
|
{
|
|
return container_of(host, struct pcie_port, pci);
|
|
}
|
|
|
|
static void dw_pcie_set_local_bus_nr(struct pci_controller *host, int busno)
|
|
{
|
|
struct pcie_port *pp = host_to_pcie(host);
|
|
|
|
pp->root_bus_nr = busno;
|
|
}
|
|
|
|
static struct pci_ops dw_pcie_ops;
|
|
|
|
int __init dw_pcie_host_init(struct pcie_port *pp)
|
|
{
|
|
struct device_node *np = pp->dev->device_node;
|
|
struct of_pci_range range;
|
|
struct of_pci_range_parser parser;
|
|
struct resource *cfg_res;
|
|
u32 val, na, ns;
|
|
const __be32 *addrp;
|
|
int index;
|
|
|
|
/* Find the address cell size and the number of cells in order to get
|
|
* the untranslated address.
|
|
*/
|
|
of_property_read_u32(np, "#address-cells", &na);
|
|
ns = of_n_size_cells(np);
|
|
|
|
cfg_res = dev_get_resource_by_name(pp->dev, IORESOURCE_MEM, "config");
|
|
if (cfg_res) {
|
|
pp->cfg0_size = resource_size(cfg_res)/2;
|
|
pp->cfg1_size = resource_size(cfg_res)/2;
|
|
pp->cfg0_base = cfg_res->start;
|
|
pp->cfg1_base = cfg_res->start + pp->cfg0_size;
|
|
|
|
/* Find the untranslated configuration space address */
|
|
index = of_property_match_string(np, "reg-names", "config");
|
|
addrp = of_get_address(np, index, NULL, NULL);
|
|
pp->cfg0_mod_base = of_read_number(addrp, ns);
|
|
pp->cfg1_mod_base = pp->cfg0_mod_base + pp->cfg0_size;
|
|
} else {
|
|
dev_err(pp->dev, "missing *config* reg space\n");
|
|
}
|
|
|
|
if (of_pci_range_parser_init(&parser, np)) {
|
|
dev_err(pp->dev, "missing ranges property\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Get the I/O and memory ranges from DT */
|
|
for_each_of_pci_range(&parser, &range) {
|
|
unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
|
|
|
|
if (restype == IORESOURCE_IO) {
|
|
of_pci_range_to_resource(&range, np, &pp->io);
|
|
pp->io.name = "I/O";
|
|
pp->io.start = range.pci_addr + global_io_offset;
|
|
pp->io.end = range.pci_addr + range.size + global_io_offset - 1;
|
|
pp->io_size = resource_size(&pp->io);
|
|
pp->io_bus_addr = range.pci_addr;
|
|
pp->io_base = range.cpu_addr;
|
|
|
|
/* Find the untranslated IO space address */
|
|
pp->io_mod_base = of_read_number(parser.range -
|
|
parser.np + na, ns);
|
|
}
|
|
if (restype == IORESOURCE_MEM) {
|
|
of_pci_range_to_resource(&range, np, &pp->mem);
|
|
pp->mem.name = "MEM";
|
|
pp->mem_size = resource_size(&pp->mem);
|
|
pp->mem_bus_addr = range.pci_addr;
|
|
|
|
/* Find the untranslated MEM space address */
|
|
pp->mem_mod_base = of_read_number(parser.range -
|
|
parser.np + na, ns);
|
|
}
|
|
if (restype == 0) {
|
|
of_pci_range_to_resource(&range, np, &pp->cfg);
|
|
pp->cfg0_size = resource_size(&pp->cfg)/2;
|
|
pp->cfg1_size = resource_size(&pp->cfg)/2;
|
|
pp->cfg0_base = pp->cfg.start;
|
|
pp->cfg1_base = pp->cfg.start + pp->cfg0_size;
|
|
|
|
/* Find the untranslated configuration space address */
|
|
pp->cfg0_mod_base = of_read_number(parser.range -
|
|
parser.np + na, ns);
|
|
pp->cfg1_mod_base = pp->cfg0_mod_base +
|
|
pp->cfg0_size;
|
|
}
|
|
}
|
|
|
|
if (!pp->dbi_base)
|
|
pp->dbi_base = (void __force *)pp->cfg.start;
|
|
|
|
pp->mem_base = pp->mem.start;
|
|
|
|
if (!pp->va_cfg0_base)
|
|
pp->va_cfg0_base = (void __force *)(u32)pp->cfg0_base;
|
|
|
|
if (!pp->va_cfg1_base)
|
|
pp->va_cfg1_base = (void __force *)(u32)pp->cfg1_base;
|
|
|
|
if (of_property_read_u32(np, "num-lanes", &pp->lanes)) {
|
|
dev_err(pp->dev, "Failed to parse the number of lanes\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pp->ops->host_init)
|
|
pp->ops->host_init(pp);
|
|
|
|
dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
|
|
|
|
/* program correct class for RC */
|
|
dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
|
|
|
|
dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
|
|
val |= PORT_LOGIC_SPEED_CHANGE;
|
|
dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
|
|
|
|
pp->pci.parent = pp->dev;
|
|
pp->pci.pci_ops = &dw_pcie_ops;
|
|
pp->pci.set_busno = dw_pcie_set_local_bus_nr;
|
|
pp->pci.mem_resource = &pp->mem;
|
|
pp->pci.io_resource = &pp->io;
|
|
|
|
register_pci_controller(&pp->pci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev)
|
|
{
|
|
/* Program viewport 0 : OUTBOUND : CFG0 */
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
|
|
PCIE_ATU_VIEWPORT);
|
|
dw_pcie_writel_rc(pp, pp->cfg0_mod_base, PCIE_ATU_LOWER_BASE);
|
|
dw_pcie_writel_rc(pp, (pp->cfg0_mod_base >> 32), PCIE_ATU_UPPER_BASE);
|
|
dw_pcie_writel_rc(pp, pp->cfg0_mod_base + pp->cfg0_size - 1,
|
|
PCIE_ATU_LIMIT);
|
|
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
|
|
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG0, PCIE_ATU_CR1);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
}
|
|
|
|
static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
|
|
{
|
|
/* Program viewport 1 : OUTBOUND : CFG1 */
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
|
|
PCIE_ATU_VIEWPORT);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
|
|
dw_pcie_writel_rc(pp, pp->cfg1_mod_base, PCIE_ATU_LOWER_BASE);
|
|
dw_pcie_writel_rc(pp, (pp->cfg1_mod_base >> 32), PCIE_ATU_UPPER_BASE);
|
|
dw_pcie_writel_rc(pp, pp->cfg1_mod_base + pp->cfg1_size - 1,
|
|
PCIE_ATU_LIMIT);
|
|
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
|
|
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
}
|
|
|
|
static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
|
|
{
|
|
/* Program viewport 0 : OUTBOUND : MEM */
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
|
|
PCIE_ATU_VIEWPORT);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
|
|
dw_pcie_writel_rc(pp, pp->mem_mod_base, PCIE_ATU_LOWER_BASE);
|
|
dw_pcie_writel_rc(pp, (pp->mem_mod_base >> 32), PCIE_ATU_UPPER_BASE);
|
|
dw_pcie_writel_rc(pp, pp->mem_mod_base + pp->mem_size - 1,
|
|
PCIE_ATU_LIMIT);
|
|
dw_pcie_writel_rc(pp, pp->mem_bus_addr, PCIE_ATU_LOWER_TARGET);
|
|
dw_pcie_writel_rc(pp, upper_32_bits(pp->mem_bus_addr),
|
|
PCIE_ATU_UPPER_TARGET);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
}
|
|
|
|
static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
|
|
{
|
|
/* Program viewport 1 : OUTBOUND : IO */
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
|
|
PCIE_ATU_VIEWPORT);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
|
|
dw_pcie_writel_rc(pp, pp->io_mod_base, PCIE_ATU_LOWER_BASE);
|
|
dw_pcie_writel_rc(pp, (pp->io_mod_base >> 32), PCIE_ATU_UPPER_BASE);
|
|
dw_pcie_writel_rc(pp, pp->io_mod_base + pp->io_size - 1,
|
|
PCIE_ATU_LIMIT);
|
|
dw_pcie_writel_rc(pp, pp->io_bus_addr, PCIE_ATU_LOWER_TARGET);
|
|
dw_pcie_writel_rc(pp, upper_32_bits(pp->io_bus_addr),
|
|
PCIE_ATU_UPPER_TARGET);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
}
|
|
|
|
static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
|
|
u32 devfn, int where, int size, u32 *val)
|
|
{
|
|
int ret = PCIBIOS_SUCCESSFUL;
|
|
u32 address, busdev;
|
|
|
|
busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
|
|
PCIE_ATU_FUNC(PCI_FUNC(devfn));
|
|
address = where & ~0x3;
|
|
|
|
if (bus->primary == pp->root_bus_nr) {
|
|
dw_pcie_prog_viewport_cfg0(pp, busdev);
|
|
ret = dw_pcie_cfg_read(pp->va_cfg0_base + address, where, size,
|
|
val);
|
|
dw_pcie_prog_viewport_mem_outbound(pp);
|
|
} else {
|
|
dw_pcie_prog_viewport_cfg1(pp, busdev);
|
|
ret = dw_pcie_cfg_read(pp->va_cfg1_base + address, where, size,
|
|
val);
|
|
dw_pcie_prog_viewport_io_outbound(pp);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
|
|
u32 devfn, int where, int size, u32 val)
|
|
{
|
|
int ret = PCIBIOS_SUCCESSFUL;
|
|
u32 address, busdev;
|
|
|
|
busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
|
|
PCIE_ATU_FUNC(PCI_FUNC(devfn));
|
|
address = where & ~0x3;
|
|
|
|
if (bus->primary == pp->root_bus_nr) {
|
|
dw_pcie_prog_viewport_cfg0(pp, busdev);
|
|
ret = dw_pcie_cfg_write(pp->va_cfg0_base + address, where, size,
|
|
val);
|
|
dw_pcie_prog_viewport_mem_outbound(pp);
|
|
} else {
|
|
dw_pcie_prog_viewport_cfg1(pp, busdev);
|
|
ret = dw_pcie_cfg_write(pp->va_cfg1_base + address, where, size,
|
|
val);
|
|
dw_pcie_prog_viewport_io_outbound(pp);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dw_pcie_valid_config(struct pcie_port *pp,
|
|
struct pci_bus *bus, int dev)
|
|
{
|
|
/* If there is no link, then there is no device */
|
|
if (bus->number != pp->root_bus_nr) {
|
|
if (!dw_pcie_link_up(pp))
|
|
return 0;
|
|
}
|
|
|
|
/* access only one slot on each root port */
|
|
if (bus->number == pp->root_bus_nr && dev > 0)
|
|
return 0;
|
|
|
|
/*
|
|
* do not read more than one device on the bus directly attached
|
|
* to RC's (Virtual Bridge's) DS side.
|
|
*/
|
|
if (bus->primary == pp->root_bus_nr && dev > 0)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int dw_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
|
|
int size, u32 *val)
|
|
{
|
|
struct pcie_port *pp = host_to_pcie(bus->host);
|
|
int ret;
|
|
|
|
*val = 0xffffffff;
|
|
|
|
if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
data_abort_mask();
|
|
|
|
if (bus->number != pp->root_bus_nr)
|
|
if (pp->ops->rd_other_conf)
|
|
ret = pp->ops->rd_other_conf(pp, bus, devfn,
|
|
where, size, val);
|
|
else
|
|
ret = dw_pcie_rd_other_conf(pp, bus, devfn,
|
|
where, size, val);
|
|
else
|
|
ret = dw_pcie_rd_own_conf(pp, where, size, val);
|
|
|
|
if (data_abort_unmask())
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dw_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
|
|
int where, int size, u32 val)
|
|
{
|
|
struct pcie_port *pp = host_to_pcie(bus->host);
|
|
int ret;
|
|
|
|
if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
data_abort_mask();
|
|
|
|
if (bus->number != pp->root_bus_nr)
|
|
if (pp->ops->wr_other_conf)
|
|
ret = pp->ops->wr_other_conf(pp, bus, devfn,
|
|
where, size, val);
|
|
else
|
|
ret = dw_pcie_wr_other_conf(pp, bus, devfn,
|
|
where, size, val);
|
|
else
|
|
ret = dw_pcie_wr_own_conf(pp, where, size, val);
|
|
|
|
if (data_abort_unmask())
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dw_pcie_res_start(struct pci_bus *bus, resource_size_t res_addr)
|
|
{
|
|
return res_addr;
|
|
}
|
|
|
|
static struct pci_ops dw_pcie_ops = {
|
|
.read = dw_pcie_rd_conf,
|
|
.write = dw_pcie_wr_conf,
|
|
.res_start = dw_pcie_res_start,
|
|
};
|
|
|
|
void dw_pcie_setup_rc(struct pcie_port *pp)
|
|
{
|
|
u32 val;
|
|
u32 membase;
|
|
u32 memlimit;
|
|
|
|
/* set the number of lanes */
|
|
dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val);
|
|
val &= ~PORT_LINK_MODE_MASK;
|
|
switch (pp->lanes) {
|
|
case 1:
|
|
val |= PORT_LINK_MODE_1_LANES;
|
|
break;
|
|
case 2:
|
|
val |= PORT_LINK_MODE_2_LANES;
|
|
break;
|
|
case 4:
|
|
val |= PORT_LINK_MODE_4_LANES;
|
|
break;
|
|
}
|
|
dw_pcie_writel_rc(pp, val, PCIE_PORT_LINK_CONTROL);
|
|
|
|
/* set link width speed control register */
|
|
dw_pcie_readl_rc(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, &val);
|
|
val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
|
|
switch (pp->lanes) {
|
|
case 1:
|
|
val |= PORT_LOGIC_LINK_WIDTH_1_LANES;
|
|
break;
|
|
case 2:
|
|
val |= PORT_LOGIC_LINK_WIDTH_2_LANES;
|
|
break;
|
|
case 4:
|
|
val |= PORT_LOGIC_LINK_WIDTH_4_LANES;
|
|
break;
|
|
}
|
|
dw_pcie_writel_rc(pp, val, PCIE_LINK_WIDTH_SPEED_CONTROL);
|
|
|
|
/* setup RC BARs */
|
|
dw_pcie_writel_rc(pp, 0x00000004, PCI_BASE_ADDRESS_0);
|
|
dw_pcie_writel_rc(pp, 0x00000000, PCI_BASE_ADDRESS_1);
|
|
|
|
/* setup bus numbers */
|
|
dw_pcie_readl_rc(pp, PCI_PRIMARY_BUS, &val);
|
|
val &= 0xff000000;
|
|
val |= 0x00010100;
|
|
dw_pcie_writel_rc(pp, val, PCI_PRIMARY_BUS);
|
|
|
|
/* setup memory base, memory limit */
|
|
membase = ((u32)pp->mem_base & 0xfff00000) >> 16;
|
|
memlimit = (pp->mem_size + (u32)pp->mem_base) & 0xfff00000;
|
|
val = memlimit | membase;
|
|
dw_pcie_writel_rc(pp, val, PCI_MEMORY_BASE);
|
|
|
|
/* setup command register */
|
|
dw_pcie_readl_rc(pp, PCI_COMMAND, &val);
|
|
val &= 0xffff0000;
|
|
val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
|
|
PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
|
|
dw_pcie_writel_rc(pp, val, PCI_COMMAND);
|
|
}
|
|
|
|
MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
|
|
MODULE_DESCRIPTION("Designware PCIe host controller driver");
|
|
MODULE_LICENSE("GPL v2");
|