260 lines
7.0 KiB
C
260 lines
7.0 KiB
C
/*
|
|
* (C) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
|
|
* (C) 2014 EPFL, Philippe Rétornaz <philippe.retornaz@epfl.ch>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*
|
|
* Board support for EPFL's, i.MX31 based CPU card
|
|
*
|
|
* Based on:
|
|
* Board support for Phytec's, i.MX31 based CPU card, called: PCM037
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <init.h>
|
|
#include <driver.h>
|
|
#include <fs.h>
|
|
#include <gpio.h>
|
|
#include <led.h>
|
|
#include <environment.h>
|
|
#include <usb/ulpi.h>
|
|
#include <mach/imx31-regs.h>
|
|
#include <mach/iomux-mx31.h>
|
|
#include <asm/armlinux.h>
|
|
#include <asm/sections.h>
|
|
#include <mach/weim.h>
|
|
#include <io.h>
|
|
#include <asm/mmu.h>
|
|
#include <partition.h>
|
|
#include <generated/mach-types.h>
|
|
#include <asm/barebox-arm.h>
|
|
#include <mach/devices-imx31.h>
|
|
|
|
#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
|
|
#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
|
|
|
|
static void mx31moboard_usb_init(void)
|
|
{
|
|
u32 tmp;
|
|
|
|
if (!IS_ENABLED(CONFIG_USB))
|
|
return;
|
|
|
|
/* enable clock */
|
|
tmp = readl(0x53f80000);
|
|
tmp |= (1 << 9);
|
|
writel(tmp, 0x53f80000);
|
|
|
|
/* Host 2 */
|
|
tmp = readl(MX31_IOMUXC_GPR);
|
|
tmp |= 1 << 11; /* IOMUX GPR: enable USBH2 signals */
|
|
writel(tmp, MX31_IOMUXC_GPR);
|
|
|
|
imx_iomux_mode(IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO));
|
|
imx_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO));
|
|
imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC));
|
|
imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC));
|
|
imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC));
|
|
imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC));
|
|
imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC));
|
|
imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC));
|
|
imx_iomux_mode(IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC));
|
|
imx_iomux_mode(IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC));
|
|
imx_iomux_mode(IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC));
|
|
imx_iomux_mode(IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC));
|
|
imx_iomux_mode(IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC));
|
|
imx_iomux_mode(IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC));
|
|
|
|
#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
|
|
| PAD_CTL_ODE_CMOS)
|
|
imx_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG | PAD_CTL_100K_PU);
|
|
imx_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG | PAD_CTL_100K_PU);
|
|
imx_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG | PAD_CTL_100K_PU);
|
|
imx_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG | PAD_CTL_100K_PU);
|
|
imx_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
|
|
imx_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
|
|
imx_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */
|
|
imx_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */
|
|
imx_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */
|
|
imx_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */
|
|
imx_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */
|
|
imx_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */
|
|
|
|
|
|
gpio_request(USB_RESET_B, "usb-reset");
|
|
gpio_direction_output(USB_RESET_B, 0);
|
|
mdelay(5);
|
|
gpio_set_value(USB_RESET_B, 1);
|
|
mdelay(10);
|
|
|
|
gpio_request(USBH2_EN_B, "usbh2-en");
|
|
gpio_direction_output(USBH2_EN_B, 0);
|
|
udelay(900);
|
|
gpio_set_value(USBH2_EN_B, 1);
|
|
udelay(200);
|
|
|
|
tmp = readl(MX31_USB_OTG_BASE_ADDR + 0x600);
|
|
tmp &= ~((3 << 21) | 1);
|
|
tmp |= (1 << 5) | (1 << 16) | (1 << 19) | (1 << 20);
|
|
writel(tmp, MX31_USB_OTG_BASE_ADDR + 0x600);
|
|
|
|
tmp = readl(MX31_USB_OTG_BASE_ADDR + 0x584);
|
|
tmp &= ~(3 << 30);
|
|
tmp |= 2 << 30;
|
|
writel(tmp, MX31_USB_OTG_BASE_ADDR + 0x584);
|
|
|
|
gpio_set_value(USBH2_EN_B, 0);
|
|
|
|
mdelay(50);
|
|
|
|
ulpi_setup((void *)(MX31_USB_OTG_BASE_ADDR + 0x570), 1);
|
|
|
|
/* Set to Host mode */
|
|
tmp = readl(MX31_USB_OTG_BASE_ADDR + 0x1a8);
|
|
writel(tmp | 0x3, MX31_USB_OTG_BASE_ADDR + 0x1a8);
|
|
|
|
}
|
|
|
|
static struct gpio_led mx31moboard_leds[] = {
|
|
{
|
|
.led = {
|
|
.name = "coreboard-led-0:red:running"
|
|
},
|
|
.gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0),
|
|
}, {
|
|
.led = {
|
|
.name = "coreboard-led-1:red",
|
|
},
|
|
.gpio = IOMUX_TO_GPIO(MX31_PIN_STX0),
|
|
}, {
|
|
.led = {
|
|
.name = "coreboard-led-2:red",
|
|
},
|
|
.gpio = IOMUX_TO_GPIO(MX31_PIN_SRX0),
|
|
}, {
|
|
.led = {
|
|
.name = "coreboard-led-3:red",
|
|
},
|
|
.gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
|
|
},
|
|
};
|
|
|
|
static void mx31moboard_add_leds(void)
|
|
{
|
|
int i;
|
|
|
|
if (!IS_ENABLED(CONFIG_LED_GPIO))
|
|
return;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mx31moboard_leds); i++) {
|
|
led_gpio_register(&mx31moboard_leds[i]);
|
|
led_set(&mx31moboard_leds[i].led, 0);
|
|
}
|
|
|
|
led_set_trigger(LED_TRIGGER_HEARTBEAT, &mx31moboard_leds[0].led);
|
|
}
|
|
|
|
static int mx31moboard_mmu_init(void)
|
|
{
|
|
l2x0_init((void __iomem *)0x30000000, 0x00030024, 0x00000000);
|
|
|
|
return 0;
|
|
}
|
|
postmmu_initcall(mx31moboard_mmu_init);
|
|
|
|
static const struct devfs_partition mx31moboard_nor0_partitions[] = {
|
|
{
|
|
.offset = 0,
|
|
.size = SZ_512K,
|
|
.flags = DEVFS_PARTITION_FIXED,
|
|
.name = "self0",
|
|
}, {
|
|
.offset = DEVFS_PARTITION_APPEND,
|
|
.size = SZ_256K,
|
|
.name = "env0",
|
|
}, {
|
|
/* Sentinel */
|
|
}
|
|
};
|
|
|
|
static int mx31moboard_devices_init(void)
|
|
{
|
|
/* CS0: Nor Flash */
|
|
imx31_setup_weimcs(0, 0x0000CC03, 0xa0330D01, 0x00220800);
|
|
|
|
/*
|
|
* Up to 32MiB NOR type flash, connected to
|
|
* CS line 0, data width is 16 bit
|
|
*/
|
|
add_cfi_flash_device(DEVICE_ID_DYNAMIC, MX31_CS0_BASE_ADDR, SZ_32M, 0);
|
|
|
|
imx31_add_mmc0(NULL);
|
|
|
|
/*
|
|
* Create partitions that should be
|
|
* not touched by any regular user
|
|
*/
|
|
devfs_create_partitions("nor0", mx31moboard_nor0_partitions);
|
|
protect_file("/dev/env0", 1);
|
|
|
|
mx31moboard_usb_init();
|
|
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC,
|
|
MX31_USB_HS2_BASE_ADDR, NULL);
|
|
|
|
mx31moboard_add_leds();
|
|
|
|
armlinux_set_architecture(MACH_TYPE_MX31MOBOARD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
device_initcall(mx31moboard_devices_init);
|
|
|
|
static unsigned int mx31moboard_iomux[] = {
|
|
/* UART1 */
|
|
MX31_PIN_RXD1__RXD1,
|
|
MX31_PIN_TXD1__TXD1,
|
|
MX31_PIN_CTS1__GPIO2_7,
|
|
/* SDHC1 */
|
|
MX31_PIN_SD1_DATA3__SD1_DATA3,
|
|
MX31_PIN_SD1_DATA2__SD1_DATA2,
|
|
MX31_PIN_SD1_DATA1__SD1_DATA1,
|
|
MX31_PIN_SD1_DATA0__SD1_DATA0,
|
|
MX31_PIN_SD1_CLK__SD1_CLK,
|
|
MX31_PIN_SD1_CMD__SD1_CMD,
|
|
MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
|
|
/* LEDS */
|
|
MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
|
|
MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
|
|
};
|
|
|
|
static int imx31_console_init(void)
|
|
{
|
|
imx_iomux_setup_multiple_pins(mx31moboard_iomux,
|
|
ARRAY_SIZE(mx31moboard_iomux));
|
|
|
|
gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
|
|
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
|
|
|
|
barebox_set_model("EPFL mx31moboard");
|
|
barebox_set_hostname("mx31moboard");
|
|
|
|
imx31_add_uart0();
|
|
|
|
return 0;
|
|
}
|
|
|
|
console_initcall(imx31_console_init);
|